Bug#991178: installation-reports
Package: installation-reports
Boot method: USB stick
Image version:
https://cdimage.debian.org/images/unofficial/non-free/images-including-firmware/bullseye_di_rc2+nonfree/amd64/iso-cd/firmware-bullseye-DI-rc2-amd64-netinst.iso
Date: 15 Jul 2021 02:00 PM PDT
Machine:
Type: Laptop System: Hewlett-Packard product: HP EliteBook 820 G2
v: A3009DD18303 serial: <superuser required>
Mobo: Hewlett-Packard model: 225A v: KBC Version 96.58
serial: <superuser required> BIOS: Hewlett-Packard v: M71 Ver. 01.12
date: 11/05/2015
Processor:
CPU:
Info: Dual Core model: Intel Core i7-5600U bits: 64 type: MT MCP
L2 cache: 4 MiB
Speed: 1843 MHz min/max: 500/3200 MHz Core speeds (MHz): 1: 1843 2: 1828
3: 2018 4: 1812
Memory: 15.51 GiB
Network:
Device-1: Intel Ethernet I218-LM driver: e1000e
IF: enp0s25 state: down mac: b0:5a:da:b2:fe:82
Device-2: Intel Wireless 7265 driver: iwlwifi
IF: wlo1 state: up mac: 94:65:9c:b4:2a:35
Partitions: <df -Tl will do; the raw partition table is preferred>
peter@g2i7d11:~$ df -Tl
df: /run/user/1000/doc: Operation not permitted
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev devtmpfs 8109536 0 8109536 0% /dev
tmpfs tmpfs 1626488 1556 1624932 1% /run
/dev/sda3 ext4 28660644 6472160 20707268 24% /
tmpfs tmpfs 8132436 59488 8072948 1% /dev/shm
tmpfs tmpfs 5120 4 5116 1% /run/lock
/dev/sda10 ext4 180377912 151667812 19477716 89%
/media/Pictures.compile
/dev/sda4 ext4 81600856 61140388 16687828 79% /home
/dev/sda8 ext4 422805976 293374432 111474524 73% /media/backup
/dev/sdb9 ext4 20027260 9989732 8997144 53%
/media/music.share
/dev/sda9 ext4 134014192 61981980 65589924 49% /media/backup.acc
/dev/sdb8 ext4 347473316 244465636 85793392 75% /media/syncspace
tmpfs tmpfs 1626484 104 1626380 1% /run/user/1000
peter@g2i7d11:~$
Output of lspci -knn (or lspci -nn):
peter@g2i7d11:~$ lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge
-OPI [8086:1604] (rev 09)
Subsystem: Hewlett-Packard Company Broadwell-U Host Bridge -OPI
[103c:225a]
Kernel driver in use: bdw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics
5500 [8086:1616] (rev 09)
DeviceName: 32
Subsystem: Hewlett-Packard Company HD Graphics 5500 [103c:225a]
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio
Controller [8086:160c] (rev 09)
Subsystem: Hewlett-Packard Company Broadwell-U Audio Controller
[103c:225a]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB
xHCI Controller [8086:9cb1] (rev 03)
Subsystem: Hewlett-Packard Company Wildcat Point-LP USB xHCI
Controller [103c:225a]
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation Wildcat
Point-LP MEI Controller #1 [8086:9cba] (rev 03)
Subsystem: Hewlett-Packard Company Wildcat Point-LP MEI Controller
[103c:225a]
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet
Connection (3) I218-LM [8086:15a2] (rev 03)
Subsystem: Hewlett-Packard Company Ethernet Connection (3) I218-LM
[103c:225a]
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High
Definition Audio Controller [8086:9ca0] (rev 03)
Subsystem: Hewlett-Packard Company Wildcat Point-LP High Definition
Audio Controller [103c:225a]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI
Express Root Port #1 [8086:9c90] (rev e3)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI
Express Root Port #2 [8086:9c92] (rev e3)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI
Express Root Port #4 [8086:9c96] (rev e3)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB
EHCI Controller [8086:9ca6] (rev 03)
Subsystem: Hewlett-Packard Company Wildcat Point-LP USB EHCI
Controller [103c:225a]
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC
Controller [8086:9cc3] (rev 03)
Subsystem: Hewlett-Packard Company Wildcat Point-LP LPC Controller
[103c:225a]
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA
Controller [AHCI Mode] [8086:9c83] (rev 03)
Subsystem: Hewlett-Packard Company Wildcat Point-LP SATA Controller
[AHCI Mode] [103c:225a]
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Wildcat Point-LP SMBus
Controller [8086:9ca2] (rev 03)
Subsystem: Hewlett-Packard Company Wildcat Point-LP SMBus
Controller [103c:225a]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227
PCI Express Card Reader [10ec:5227] (rev 01)
Subsystem: Hewlett-Packard Company RTS5227 PCI Express Card Reader
[103c:225a]
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
03:00.0 Network controller [0280]: Intel Corporation Wireless 7265
[8086:095a] (rev 48)
DeviceName: WLAN
Subsystem: Intel Corporation Dual Band Wireless-AC 7265 [8086:5010]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
peter@g2i7d11:~$
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [O]
Detect media: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
Problems:
wifi firmware was not detected, per the prompt I inserted a USB stick
with Buster Mate Live in another port, then the install continued as
expected
grub did not install despite pointing to the drive with a viable
partition with bios-grub flags
when install completed I booted the machine with existing Buster, ran
grub-install /dev/sda && update-grub, GRUB menu is now complete.
Comments: I dislike the default check boxes and see no clear explanation
in the Wiki
"Debian desktop environment" appears to be Gnome light or some such
"... Gnome" is Not a reasonable default
"... Gnome Flashback" what is that?
Reply to: