[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#405737: marked as done ("i810 based gfx cards need adhoc framebuffer driver to support g-i")

Your message dated Sat, 22 May 2021 06:55:31 +0200
with message-id <YKiOw5Cinm3F+yAX@mraw.org>
and subject line Re: Bug#405737: Reassigning 405737 to debian-installer
has caused the Debian Bug report #405737,
regarding "i810 based gfx cards need adhoc framebuffer driver to support g-i"
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
405737: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=405737
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports (bug report  : installgui fails)

Boot method: CD

Image version: Debian GNU/Linux testing "Etch" - Official Snapshot
i386 NETINST Binary-1 20070103-21:52 (/.disk/info)

Date: Jan 5 22:59:22 (IST)
Machine: Assembled PC x86.
Processor: Intel Pentium III (Katmai) 550MHz
Memory: 128 MB

Partitions: (output of fdisk -l)

Disk /dev/hda: 80.0 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device  Boot      Start         End        Blocks      Id    System
/dev/hda1   *            1               2          16033+   11  Hidden FAT12
/dev/hda2                 3            975     7815622+   83  Linux
/dev/hda3             976         1583      4883760     c     W95 FAT32 (LBA)
/dev/hda4            1584        9733    65464875     5     Extended
/dev/hda5            1584        2556      7815591     83   Linux
/dev/hda6            2557        2618        497983+  82   Linux swap / Solaris
/dev/hda7            2619        6265    29294496     83   Linux
/dev/hda8            6266        6873      4883728+   83  Linux
/dev/hda9            6874        7481      4883728+   83  Linux
/dev/hda10          9126        9733      4883728+   83  Linux



Output of lspci -nn :

0000:00:00.0 0600: 8086:7120 (rev 03)
0000:00:01.0 0300: 8086:7121 (rev 03)
0000:00:1e.0 0604: 8086:2418 (rev 02)
0000:00:1f.0 0601: 8086:2410 (rev 02)
0000:00:1f.1 0101: 8086:2411 (rev 02)
0000:00:1f.2 0c03: 8086:2412 (rev 02)
0000:00:1f.5 0401: 8086:2415 (rev 02)
0000:01:0a.0 0200: 10ec:8139 (rev 10)

Output of lspci -vnn:

0000:00:00.0 0600: 8086:7120 (rev 03)
       Subsystem: 8086:7120
       Flags: bus master, fast devsel, latency 0

0000:00:01.0 0300: 8086:7121 (rev 03)
       Subsystem: 8086:7121
       Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10
       Memory at d8000000 (32-bit, prefetchable) [size=64M]
       Memory at de000000 (32-bit, non-prefetchable) [size=512K]
       Capabilities: [dc] Power Management version 1

0000:00:1e.0 0604: 8086:2418 (rev 02)
       Flags: bus master, fast devsel, latency 0
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
       I/O behind bridge: 0000c000-0000cfff
       Memory behind bridge: dc000000-ddffffff
       Prefetchable memory behind bridge: 10000000-100fffff

0000:00:1f.0 0601: 8086:2410 (rev 02)
       Flags: bus master, medium devsel, latency 0

0000:00:1f.1 0101: 8086:2411 (rev 02) (prog-if 80 [Master])
       Subsystem: 8086:2411
       Flags: bus master, medium devsel, latency 0
       I/O ports at f000 [size=16]

0000:00:1f.2 0c03: 8086:2412 (rev 02)
       Subsystem: 8086:2412
       Flags: bus master, medium devsel, latency 0, IRQ 11
       I/O ports at d000 [size=32]

0000:00:1f.5 0401: 8086:2415 (rev 02)
       Subsystem: 11d4:0048
       Flags: bus master, medium devsel, latency 0, IRQ 5
       I/O ports at d800 [size=256]
       I/O ports at dc00 [size=64]

0000:01:0a.0 0200: 10ec:8139 (rev 10)
       Subsystem: 10ec:8139
       Flags: bus master, medium devsel, latency 32, IRQ 11
       I/O ports at c000 [size=256]
       Memory at dd000000 (32-bit, non-prefetchable) [size=256]
       Expansion ROM at 10000000 [disabled] [size=64K]
       Capabilities: [50] Power Management version 2



bootparameters : installgui

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:                    [O]
Detect network card:    [ ]
This was O.K when a normal textmode install is used.

Configure network:      [ ]
Detect CD:              [O]
Load installer modules: [E]

DirectFB initialisation fails.
then init keeps restarting debian-installer for ever.


Detect hard drives:     [O]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:
I am using the daily-build netinst image burnt onto a CDRW using cdrecord. Once
the bootsplash is shown, I used installgui at boot-prompt. Booting is perfect in
all respects until the framebuffer initialisation happens. A page full of
DirectFB initialisation stuff is shown, then screen blanks and repeats the same
thing. I used suspend (CTRL+S) to hold the screen. From vc4 it was clear that
debian-installer was the one which was being repeatedly invoked. So I used vc2
shell to do 'log-output debian-installer' to get pretty much the same output as
on vc1. And here is the final /var/log/syslog

---------------------------------syslog
start-----------------------------------------

Jan  5 22:59:22 syslogd started: BusyBox v1.1.3
Jan  5 22:59:22 kernel: klogd started: BusyBox v1.1.3 (Debian 1:1.1.3-3)
Jan  5 22:59:22 kernel: Linux version 2.6.17-2-486 (Debian 2.6.17-9)
(waldi@debian.org) (gcc version 4.1.2 20060901 (prerelease) (Debian
4.1.1-13)) #1 Wed Sep 13 15:56:30 UTC 2006
Jan  5 22:59:22 kernel: BIOS-provided physical RAM map:
Jan  5 22:59:22 kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jan  5 22:59:22 kernel:  BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Jan  5 22:59:22 kernel:  BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Jan  5 22:59:22 kernel:  BIOS-e820: 0000000000100000 - 0000000007ef0000 (usable)
Jan  5 22:59:22 kernel:  BIOS-e820: 0000000007ef0000 -
0000000007ef3000 (ACPI NVS)
Jan  5 22:59:22 kernel:  BIOS-e820: 0000000007ef3000 -
0000000007f00000 (ACPI data)
Jan  5 22:59:22 kernel:  BIOS-e820: 00000000ffb00000 -
0000000100000000 (reserved)
Jan  5 22:59:22 kernel: 126MB LOWMEM available.
Jan  5 22:59:22 kernel: On node 0 totalpages: 32496
Jan  5 22:59:22 kernel:   DMA zone: 4096 pages, LIFO batch:0
Jan  5 22:59:22 kernel:   Normal zone: 28400 pages, LIFO batch:7
Jan  5 22:59:22 kernel: DMI 2.2 present.
Jan  5 22:59:22 kernel: ACPI: RSDP (v000 IntelR
       ) @ 0x000f6c70
Jan  5 22:59:22 kernel: ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31
AWRD 0x00000000) @ 0x07ef3000
Jan  5 22:59:22 kernel: ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31
AWRD 0x00000000) @ 0x07ef3040
Jan  5 22:59:22 kernel: ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000
MSFT 0x0100000c) @ 0x00000000
Jan  5 22:59:22 kernel: ACPI: PM-Timer IO Port: 0x4008
Jan  5 22:59:22 kernel: Allocating PCI resources starting at 10000000
(gap: 07f00000:f7c00000)
Jan  5 22:59:22 kernel: Built 1 zonelists
Jan  5 22:59:22 kernel: Kernel command line: video=vesa:ywrap,mtrr
vga=788 initrd=/install.386/gtk/initrd.gz --
BOOT_IMAGE=/install.386/vmlinuz
Jan  5 22:59:22 kernel: Local APIC disabled by BIOS -- you can enable
it with "lapic"
Jan  5 22:59:22 kernel: mapped APIC to ffffd000 (01101000)
Jan  5 22:59:22 kernel: Enabling fast FPU save and restore... done.
Jan  5 22:59:22 kernel: Enabling unmasked SIMD FPU exception support... done.
Jan  5 22:59:22 kernel: Initializing CPU#0
Jan  5 22:59:22 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Jan  5 22:59:22 kernel: Detected 551.321 MHz processor.
Jan  5 22:59:22 kernel: Using pmtmr for high-res timesource
Jan  5 22:59:22 kernel: Console: colour VGA+ 80x25
Jan  5 22:59:22 kernel: Dentry cache hash table entries: 16384 (order:
4, 65536 bytes)
Jan  5 22:59:22 kernel: Inode-cache hash table entries: 8192 (order:
3, 32768 bytes)
Jan  5 22:59:22 kernel: Memory: 116064k/129984k available (1456k
kernel code, 13376k reserved, 566k data, 252k init, 0k highmem)
Jan  5 22:59:22 kernel: Checking if this processor honours the WP bit
even in supervisor mode... Ok.
Jan  5 22:59:22 kernel: Calibrating delay using timer specific
routine.. 1103.75 BogoMIPS (lpj=2207504)
Jan  5 22:59:22 kernel: Security Framework v1.0.0 initialized
Jan  5 22:59:22 kernel: SELinux:  Disabled at boot.
Jan  5 22:59:22 kernel: Capability LSM initialized
Jan  5 22:59:22 kernel: Mount-cache hash table entries: 512
Jan  5 22:59:22 kernel: CPU: After generic identify, caps: 0387f9ff
00000000 00000000 00000000 00000000 00000000 00000000
Jan  5 22:59:22 kernel: CPU: After vendor identify, caps: 0387f9ff
00000000 00000000 00000000 00000000 00000000 00000000
Jan  5 22:59:22 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jan  5 22:59:22 kernel: CPU: L2 cache: 512K
Jan  5 22:59:22 kernel: CPU serial number disabled.
Jan  5 22:59:22 kernel: CPU: After all inits, caps: 0383f9ff 00000000
00000000 00000040 00000000 00000000 00000000
Jan  5 22:59:22 kernel: CPU: Intel Pentium III (Katmai) stepping 03
Jan  5 22:59:22 kernel: Checking 'hlt' instruction... OK.
Jan  5 22:59:22 kernel: SMP alternatives: switching to UP code
Jan  5 22:59:22 kernel: Freeing SMP alternatives: 0k freed
Jan  5 22:59:22 kernel: ACPI: setting ELCR to 0200 (from 0e20)
Jan  5 22:59:22 kernel: checking if image is initramfs... it is
Jan  5 22:59:22 kernel: Freeing initrd memory: 9719k freed
Jan  5 22:59:22 kernel: NET: Registered protocol family 16
Jan  5 22:59:22 kernel: EISA bus registered
Jan  5 22:59:22 kernel: ACPI: bus type pci registered
Jan  5 22:59:22 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=1
Jan  5 22:59:22 kernel: Setting up standard PCI resources
Jan  5 22:59:22 kernel: ACPI: Subsystem revision 20060127
Jan  5 22:59:22 kernel: ACPI: Interpreter enabled
Jan  5 22:59:22 kernel: ACPI: Using PIC for interrupt routing
Jan  5 22:59:22 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan  5 22:59:22 kernel: PCI: Probing PCI hardware (bus 00)
Jan  5 22:59:22 kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Jan  5 22:59:22 kernel: Boot video device is 0000:00:01.0
Jan  5 22:59:22 kernel: PCI quirk: region 4000-407f claimed by ICH4
ACPI/GPIO/TCO
Jan  5 22:59:22 kernel: PCI quirk: region 4080-40bf claimed by ICH4 GPIO
Jan  5 22:59:22 kernel: PCI: Transparent bridge - 0000:00:1e.0
Jan  5 22:59:22 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan  5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6
7 *10 11 12 14 15)
Jan  5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6
7 10 11 12 14 15)
Jan  5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6
7 10 *11 12 14 15)
Jan  5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6
7 10 11 12 14 15) *9
Jan  5 22:59:22 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan  5 22:59:22 kernel: pnp: PnP ACPI init
Jan  5 22:59:22 kernel: pnp: PnP ACPI: found 15 devices
Jan  5 22:59:22 kernel: PnPBIOS: Disabled by ACPI PNP
Jan  5 22:59:22 kernel: PCI: Using ACPI for IRQ routing
Jan  5 22:59:22 kernel: doesn't work, try "pci=routeirq".  If it
helps, post a report
Jan  5 22:59:22 kernel: PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0
Jan  5 22:59:22 kernel: PCI: Bridge: 0000:00:1e.0
Jan  5 22:59:22 kernel:   IO window: c000-cfff
Jan  5 22:59:22 kernel:   MEM window: dc000000-ddffffff
Jan  5 22:59:22 kernel:   PREFETCH window: 10000000-100fffff
Jan  5 22:59:22 kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jan  5 22:59:22 kernel: NET: Registered protocol family 2
Jan  5 22:59:22 kernel: IP route cache hash table entries: 1024
(order: 0, 4096 bytes)
Jan  5 22:59:22 kernel: TCP established hash table entries: 4096
(order: 2, 16384 bytes)
Jan  5 22:59:22 kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Jan  5 22:59:22 kernel: TCP: Hash tables configured (established 4096 bind 2048)
Jan  5 22:59:22 kernel: TCP reno registered
Jan  5 22:59:22 kernel: audit: initializing netlink socket (disabled)
Jan  5 22:59:22 kernel: audit(1168037956.024:1): initialized
Jan  5 22:59:22 kernel: VFS: Disk quotas dquot_6.5.1
Jan  5 22:59:22 kernel: Dquot-cache hash table entries: 1024 (order 0,
4096 bytes)
Jan  5 22:59:22 kernel: Initializing Cryptographic API
Jan  5 22:59:22 kernel: io scheduler noop registered
Jan  5 22:59:22 kernel: io scheduler anticipatory registered (default)
Jan  5 22:59:22 kernel: io scheduler deadline registered
Jan  5 22:59:22 kernel: io scheduler cfq registered
Jan  5 22:59:22 kernel: isapnp: Scanning for PnP cards...
Jan  5 22:59:22 kernel: isapnp: No Plug & Play device found
Jan  5 22:59:22 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4
ports, IRQ sharing enabled
Jan  5 22:59:22 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan  5 22:59:22 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan  5 22:59:22 kernel: RAMDISK driver initialized: 16 RAM disks of
8192K size 1024 blocksize
Jan  5 22:59:22 kernel: PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jan  5 22:59:22 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan  5 22:59:22 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan  5 22:59:22 kernel: EISA: Probing bus 0 at eisa.0
Jan  5 22:59:22 kernel: Cannot allocate resource for EISA slot 4
Jan  5 22:59:22 kernel: EISA: Detected 0 cards.
Jan  5 22:59:22 kernel: TCP bic registered
Jan  5 22:59:22 kernel: NET: Registered protocol family 1
Jan  5 22:59:22 kernel: NET: Registered protocol family 17
Jan  5 22:59:22 kernel: NET: Registered protocol family 8
Jan  5 22:59:22 kernel: NET: Registered protocol family 20
Jan  5 22:59:22 kernel: Using IPI Shortcut mode
Jan  5 22:59:22 kernel: ACPI wakeup devices:
Jan  5 22:59:22 kernel: SLPB PCI0 USB0 UAR1 UAR2
Jan  5 22:59:22 kernel: ACPI: (supports S0 S1 S4 S5)
Jan  5 22:59:22 kernel: Freeing unused kernel memory: 252k freed
Jan  5 22:59:22 kernel: input: AT Translated Set 2 keyboard as
/class/input/input0
Jan  5 22:59:22 kernel: usbcore: registered new driver usbfs
Jan  5 22:59:22 kernel: usbcore: registered new driver hub
Jan  5 22:59:22 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan  5 22:59:22 kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Jan  5 22:59:22 kernel: parport: PnPBIOS parport detected.
Jan  5 22:59:22 kernel: parport0: PC-style at 0x378 (0x778), irq 7,
dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Jan  5 22:59:22 kernel: USB Universal Host Controller Interface driver v3.0
Jan  5 22:59:22 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Jan  5 22:59:22 kernel: PCI: setting IRQ 11 as level-triggered
Jan  5 22:59:22 kernel: ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link
[LNKD] -> GSI 11 (level, low) -> IRQ 11
Jan  5 22:59:22 kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jan  5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: UHCI Host Controller
Jan  5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: new USB bus registered,
assigned bus number 1
Jan  5 22:59:22 kernel: uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
Jan  5 22:59:22 kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  5 22:59:22 kernel: hub 1-0:1.0: USB hub found
Jan  5 22:59:22 kernel: hub 1-0:1.0: 2 ports detected
Jan  5 22:59:22 kernel: ICH: IDE controller at PCI slot 0000:00:1f.1
Jan  5 22:59:22 kernel: ICH: chipset revision 2
Jan  5 22:59:22 kernel: ICH: not 100% native mode: will probe irqs later
Jan  5 22:59:22 kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:pio
Jan  5 22:59:22 kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:DMA, hdd:DMA
Jan  5 22:59:22 kernel: Probing IDE interface ide0...
Jan  5 22:59:22 kernel: input: ImPS/2 Logitech Wheel Mouse as
/class/input/input1
Jan  5 22:59:22 kernel: hda: SAMSUNG SV0802N, ATA DISK drive
Jan  5 22:59:22 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan  5 22:59:22 kernel: Probing IDE interface ide1...
Jan  5 22:59:22 kernel: hdc: TSSTcorp CDW/DVD SH-M522C, ATAPI CD/DVD-ROM drive
Jan  5 22:59:22 kernel: hdd: SAMSUNG CD-R/RW DRIVE SW-252F, ATAPI
CD/DVD-ROM drive
Jan  5 22:59:22 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan  5 22:59:22 kernel: hda: max request size: 512KiB
Jan  5 22:59:22 kernel: hda: 156368016 sectors (80060 MB) w/2048KiB
Cache, CHS=16383/255/63, UDMA(33)
Jan  5 22:59:22 kernel: hda: cache flushes supported
Jan  5 22:59:22 kernel:  hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7
hda8 hda9 hda10 >
Jan  5 22:59:22 kernel: hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 1536kB
Cache, UDMA(33)
Jan  5 22:59:22 kernel: Uniform CD-ROM driver Revision: 3.20
Jan  5 22:59:22 kernel: hdd: ATAPI 1X CD-ROM CD-R/RW drive, 2048kB
Cache, UDMA(33)
Jan  5 22:59:22 kernel: ACPI: Fan [FAN] (on)
Jan  5 22:59:22 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
Jan  5 22:59:22 kernel: ACPI: Processor [CPU0] (supports 2 throttling states)
Jan  5 22:59:22 kernel: ACPI: Thermal Zone [THRM] (38 C)
Jan  5 22:59:24 kernel: usbcore: registered new driver usbkbd
Jan  5 22:59:24 kernel: drivers/usb/input/usbkbd.c: :USB HID Boot
Protocol keyboard driver
Jan  5 22:59:24 kernel: usbcore: registered new driver hiddev
Jan  5 22:59:24 kernel: usbcore: registered new driver usbhid
Jan  5 22:59:24 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan  5 22:59:24 kernel: usbcore: registered new driver usbserial
Jan  5 22:59:24 kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for generic
Jan  5 22:59:24 kernel: usbcore: registered new driver usbserial_generic
Jan  5 22:59:24 kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan  5 22:59:25 kernel: vga16fb: initializing
Jan  5 22:59:25 kernel: vga16fb: mapped to 0xb00a0000
Jan  5 22:59:25 kernel: Console: switching to colour frame buffer device 80x30
Jan  5 22:59:25 kernel: fb0: VGA16 VGA frame buffer device
Jan  5 22:59:25 init: Starting pid 2097, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 22:59:25 init: Starting pid 2105, console /dev/vc/4: '/usr/bin/tail'
Jan  5 22:59:27 init: Process '/sbin/debian-installer' (pid 2097)
exited.  Scheduling it for restart.
Jan  5 22:59:27 init: Starting pid 2173, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 22:59:28 init: Process '/sbin/debian-installer' (pid 2173)
exited.  Scheduling it for restart.
Jan  5 22:59:28 init: Starting pid 2235, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 22:59:30 init: Process '/sbin/debian-installer' (pid 2235)
exited.  Scheduling it for restart.
Jan  5 22:59:30 init: Starting pid 2297, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 22:59:32 init: Process '/sbin/debian-installer' (pid 2297)
exited.  Scheduling it for restart.
Jan  5 22:59:32 init: Starting pid 2359, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 22:59:33 init: Process '/sbin/debian-installer' (pid 2359)
exited.  Scheduling it for restart.
Jan  5 22:59:33 init: Starting pid 2421, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 22:59:35 init: Process '/sbin/debian-installer' (pid 2421)
exited.  Scheduling it for restart.
Jan  5 22:59:35 init: Starting pid 2483, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 22:59:37 init: Process '/sbin/debian-installer' (pid 2483)
exited.  Scheduling it for restart.
Jan  5 22:59:37 init: Starting pid 2545, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 22:59:38 init: Process '/sbin/debian-installer' (pid 2545)
exited.  Scheduling it for restart.
Jan  5 22:59:38 init: Starting pid 2607, console /dev/vc/1:
'/sbin/debian-installer'
Jan  5 23:00:06 init: Starting pid 2108, console /dev/vc/2: '/bin/sh'
Jan  5 23:00:39 log-output: ^[[9;0]
Jan  5 23:00:39 log-output: ^[%G
Jan  5 23:00:39 log-output: (process:2682): INFO: kbd-mode: setting
console mode to Unicode (UTF-8)
Jan  5 23:00:39 log-output:
Jan  5 23:00:40 log-output: (*) DirectFB/Config: Parsing config file
'/etc/directfbrc'.
Jan  5 23:00:40 log-output:
Jan  5 23:00:40 log-output:        ---------------------- DirectFB
v0.9.25 ---------------------
Jan  5 23:00:40 log-output:              (c) 2000-2002  convergence
integrated media GmbH
Jan  5 23:00:40 log-output:              (c) 2002-2004  convergence
GmbH
Jan  5 23:00:40 log-output:
-----------------------------------------------------------
Jan  5 23:00:40 log-output:
Jan  5 23:00:40 log-output: (*) DirectFB/Core: Single Application
Core. (2006-10-17 10:15)
Jan  5 23:00:40 log-output: (*) Direct/Memcpy: Using linux kernel memcpy()
Jan  5 23:00:40 log-output: (*) Direct/Thread: Running 'VT Switcher'
(CRITICAL, 2719)...
Jan  5 23:00:40 log-output: (*) Direct/Thread: Running 'Keyboard
Input' (INPUT, 2720)...
Jan  5 23:00:40 log-output:  (!!!)  *** UNIMPLEMENTED
[fusion_reactor_set_lock] *** [../../../lib/fusion/reactor.c:853]
Jan  5 23:00:40 log-output: (*) DirectFB/Input: Keyboard 0.9
(convergence integrated media GmbH)
Jan  5 23:00:40 log-output: (*) Direct/Thread: Running 'Linux Input'
(INPUT, 2721)...
Jan  5 23:00:40 log-output: (*) DirectFB/Input: AT Translated Set 2
keyboard (1) 0.1 (convergence integrated media GmbH)
Jan  5 23:00:40 log-output: (*) Direct/Thread: Running 'Linux Input'
(INPUT, 2722)...
Jan  5 23:00:40 log-output: (*) DirectFB/Input: ImPS/2 Logitech Wheel
Mouse (2) 0.1 (convergence integrated media GmbH)
Jan  5 23:00:40 log-output: (*) DirectFB/Graphics: Generic Software
Rasterizer 0.6 (convergence integrated media GmbH)
Jan  5 23:00:40 log-output: (!) DirectFB/FBDev: No supported modes
found in /etc/fb.modes and current mode not supported!
Jan  5 23:00:40 log-output: (!) DirectFB/FBDev: Current mode's
pixelformat: rgba 6/0, 6/0, 6/0, 0/0 (4bit)
Jan  5 23:00:40 log-output: (!) DirectFB/Core/layers: Failed to
initialize layer 0!
Jan  5 23:00:40 log-output:     --> Initialization error!
Jan  5 23:00:40 log-output: (!) DirectFB/Core: Could not initialize
'layers' core!
Jan  5 23:00:40 log-output:     --> Initialization error!
Jan  5 23:00:40 log-output: (#) DirectFBError [gdk_display_open:
DirectFBCreate]: Initialization error!
Jan  5 23:00:40 log-output:
Jan  5 23:00:40 log-output: (debconf:2715): Gtk-WARNING **: cannot
open display:

---------------------------------syslog
end-----------------------------------------

Further information :

The kernel symbols (/proc/kallsyms) showed no signs of any i810fb and
no modules of that name
could be seen (in /lib/modules/.../).

There is no fb.modes in /etc/

I think the kernel module for i810fb was not included with the CD image.


The text mode install seems to go well.

--- End Message ---
--- Begin Message --- 
Attilio Fiandrotti <attilio.fiandrotti@gmail.com> (2007-12-22):
> reassign 405737 debian-installer
> retitle 405737 "i810 based gfx cards need adhoc framebuffer driver to
> support g-i"
> thanks
> 
> I am reassigning this bug to debian-installer because it's not due to a bug
> in the GTK cdebconf frontend, but rather to the lack of the i810 fb module
> in the kernel.

We switched from DirectFB to X.Org a long while ago, so let's not keep
old bug reports like this one around.


Cheers,
-- 
Cyril Brulebois (kibi@debian.org)            <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant

Attachment: signature.asc
Description: PGP signature


--- End Message ---
Reply to: