Package: installation-reports
Boot method: hd-media/sd-card-images + usb (fat32) with debian-cd debian-10.6.0-armhf-xfce-CD-1.iso.
I was using uart (pl2303).
Image version: https://mirror.yandex.ru/debian-cd/10.6.0/armhf/bt-cd/debian-10.6.0-armhf-xfce-CD-1.iso.torrent
Date: 2020-10-01 20:12 MSK
Machine: cubietech cubietrick plus (cubieboard 5)
Processor: soc A83t (2GHz ?)
Memory: 2GiB (DDR3 at 672MHz)
Partitions:
df -Tlx tmpfs:
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev devtmpfs 1010732 0 1010732 0% /dev
/dev/sda3 ext4 24639824 885236 22479916 4% /
/dev/sda1 ext2 1032088 30632 949028 4% /boot
/dev/sda4 ext4 263174212 770396 248965660 1% /home
fdisk -l /dev/sda:
Disk /dev/sda: 298.1 GiB, 320072931328 bytes, 625142444 sectors
Disk model: 00BEKT-60PVMT0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xfdb06b7f
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 2099199 2097152 1G 83 Linux
/dev/sda2 2099200 10487807 8388608 4G 82 Linux swap / Solaris
/dev/sda3 10487808 60819455 50331648 24G 83 Linux
/dev/sda4 60819456 597690367 536870912 256G 83 Linux
Output of lspci -knn (or lspci -nn):
(empty output)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [ ]
Configure network: [ ]
Detect media: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [E]
Comments/Problems:
No sdcard demonstrated, only usb and sata.
No dp or hdmi.
Installation to sata (manually prepared dos partitioning, just select filesystems) sucsessed.
Installation of u-boot climed sucsess yet failed (system was not bootable).
By main pc:
1. copyed boot partition (from sata) to sdcard.
2. installed by dd u-boot (from u-boot-sunxi_2020.10~rc5+dfsg-1_armhf.deb) to sdcard.
3. insertied sdcard to cb5.
System worked.
But no video, no network, no sdcard.
Uart work fine.
Usb came up after long delay (with some errors).
I assume system is unusable.
Kernel update yet again claim no errors, but bootloader is stil to be installed.
I regret sdcard not showed up.