[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#914813: Some additional informations



Hello Vagrant
Hello Geert

I had a further look, what possibly happened.

If you have a look at the older bug report #879987 from Stefan Berzl:
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879987

>>snip<<
> [    1.631520] can: netlink gateway (rev 20170425) max_hops=1
> [    1.631794] Key type dns_resolver registered
> [    1.631923] Registering SWP/SWPB emulation handler
> [    1.640174] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
> [    1.640897] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP813 found
> [    1.644526] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0
> [    1.644911] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
> [    1.647179] ac100-rtc ac100-rtc: rtc core: registered rtc-ac100 as rtc0
> [    1.647756] ac100-rtc ac100-rtc: RTC enabled
> [    1.648353] sun4i-usb-phy 1c19400.phy: Couldn't get regulator usb1_vbus... Deferring probe
>>snip<<

At timestamp 1.640174, there is the sunxi-rsb detected.
Immediately after that, there is the AXP813 initialized.

Now, i had a look about the RSB.
This is the Allwinner sunxi reduced serial bus driver:
> https://cateee.net/lkddb/web-lkddb/SUNXI_RSB.html

Here, you see, this bus is for communicating with the PMIC AXP8XX.

If you have a look at my last log from the Banana Pi M3:
> https://bugs.debian.org/cgi-bin/bugreport.cgi?att=1;bug=914813;filename=uboot-2020.07%2Bdfsg-1.log;msg=110

>>snip<<
> [    3.921308] Key type fscrypt-provisioning registered
> [    3.921751] AppArmor: AppArmor sha1 policy hashing enabled
> [    3.941274] sun8i-a83t-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
> [    3.942050] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
> [    3.944712] ac100-rtc ac100-rtc: DMA mask not set
> [    3.948747] ac100-rtc ac100-rtc: registered as rtc0
> [    3.949185] ac100-rtc ac100-rtc: setting system clock to 1970-01-01T01:00:15 UTC (3615)
>>snip<<

Here, the RSB is detected.
But there is no AXP initialization.

Now, my question:
Is it possible, that the RSB kernel module is missing (drivers/bus/)?
Or, is it possible, that the AXP kernel module is missing?

Hopefully, these informations help for further analysis.

Best regards and thank you for the great support.

Bernhard

Attachment: signature.asc
Description: This is a digitally signed message part


Reply to: