Your message dated Fri, 21 Aug 2020 04:58:02 +0200 with message-id <[🔎] 20200821045802.07acb7c9ded347064600db2d@mailbox.org> and subject line Re: Mass-closing old installation-report bugs --- round 5 has caused the Debian Bug report #893748, regarding installation-reports to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 893748: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=893748 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: installation-reports
- From: jose jose <jo3se001@gmail.com>
- Date: Thu, 22 Mar 2018 02:36:39 +0300
- Message-id: <CANr6j5CO-PLoHxVZPRYoeTqTkZ2F0jLm3m9fE1sF9VgaxFLFtw@mail.gmail.com>
Package: installation-reports
Boot method: Very good, TFTP+USB.iso+ ttl pl2303+network
Image version: http://cdimage.debian.org/cdimage/weekly-builds/armhf/iso-cd/debian-testing-armhf-xfce-CD-1.iso
http://d-i.debian.org/daily-images/armhf/daily/hd-media/hd-media.tar.gz vmlinuz initrd.gz sun8i-h3-orangepi-pc.dtb
Date: 22.03.2018_00:05AM msk
Machine: Orange pi pc
Processor: H3 Quad-core Cortex-A7
Memory: 1GB DDR3 SDRAM
Partitions: # df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev devtmpfs 494432 0 494432 0% /dev
tmpfs tmpfs 102448 3160 99288 4% /run
/dev/mmcblk0p2 ext4 13738032 2965672 10054792 23% /
tmpfs tmpfs 512228 0 512228 0% /dev/shm
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 512228 0 512228 0% /sys/fs/cgroup
/dev/mmcblk0p1 ext2 240972 26455 202076 12% /boot
tmpfs tmpfs 102444 0 102444 0% /run/user/0
lspci -knn и lspci -nn: blank
Base System Installation Checklist:
[O] = OK, [E] = Ошибка (описать подробности ниже), [ ] = не пробовал
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [ ]
Install boot loader: [0]
Overall install: [ ]
BOOT:
===========================================================
tftpboot ${kernel_addr_r} vmlinuz
tftpboot ${fdt_addr_r} sun8i-h3-orangepi-pc.dtb
tftpboot ${ramdisk_addr_r} initrd.gz
===============
bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r}
===================================================================
Comments/Problems:
Hi,
Install Very good.
The problem with the display,you cannot run.The monitor console fades after the system boots.
Orange pi pc and Orange pi pc_Plus
root@debian:~# reboot
[ 94.943836] reboot: Restarting system
U-Boot SPL 2017.09-armbian (Nov 22 2017 - 16:49:05)
DRAM: 1024 MiB
Trying to boot from MMC1
U-Boot 2017.09-armbian (Nov 22 2017 - 16:49:05 +0100) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
In: serial
Out: vidconsole
Err: vidconsole
Net: phy interface0
eth0: ethernet@1c30000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
USB4: USB EHCI 1.00
USB5: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 2 USB Device(s) found
scanning bus 4 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
Unknown command 'hdd' - try 'help'
Unknown command 'ide' - try 'help'
=> run mmc_boot
switch to partitions #0, OK
mmc0 is current device
** Bad device specification mmc -bootable **
Scanning mmc :1...
Found U-Boot script /boot.scr
2627 bytes read in 150 ms (16.6 KiB/s)
## Executing script at 43100000
Mainline u-boot / new-style environment detected.
4121088 bytes read in 366 ms (10.7 MiB/s)
15271 bytes read in 185 ms (80.1 KiB/s)
17570483 bytes read in 1329 ms (12.6 MiB/s)
Booting Debian 4.14.0-3-armmp-lpae from mmc :1...
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Using Device Tree in place at 43000000, end 43006ba6
Starting kernel ...
[ 0.002521] /cpus/cpu@0 missing clock-frequency property
[ 0.002548] /cpus/cpu@1 missing clock-frequency property
[ 0.002568] /cpus/cpu@2 missing clock-frequency property
[ 0.002588] /cpus/cpu@3 missing clock-frequency property
[ 0.039358] dmi: Firmware registration failed.
[ 1.297509] kvm [1]: HYP mode not available
[ 4.131282] dmi-sysfs: dmi entry is absent.
[ 4.145906] sr_init: platform driver register failed for SR
/dev/mmcblk0p2: clean, 138385/876544 files, 798718/3505920 blocks
[ 10.604225] cpu cpu0: failed to get clock: -2
[ 11.721440] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not r egistered
[ 11.729439] sun4i-codec 1c22c00.codec: Failed to register our card
[ 11.974243] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not r egistered
[ 11.982278] sun4i-codec 1c22c00.codec: Failed to register our card
[ 11.993868] sd 0:0:0:0: [sda] No Caching mode page found
[ 11.999236] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 18.097143] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not r egistered
[ 18.105109] sun4i-codec 1c22c00.codec: Failed to register our card
Debian GNU/Linux buster/sid debian ttyS0
debian login: root
Password:
Last login: Thu Mar 22 01:22:41 MSK 2018 on ttyS0
Linux debian 4.14.0-3-armmp-lpae #1 SMP Debian 4.14.17-1 (2018-02-14) armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
root@debian:~# df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev devtmpfs 494432 0 494432 0% /dev
tmpfs tmpfs 102448 3164 99284 4% /run
/dev/mmcblk0p2 ext4 13738032 2909436 10111028 23% /
tmpfs tmpfs 512228 0 512228 0% /dev/shm
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 512228 0 512228 0% /sys/fs/cgroup
/dev/mmcblk0p1 ext2 240972 26455 202076 12% /boot
tmpfs tmpfs 102444 0 102444 0% /run/user/0
root@debian:~#
root@debian:~# lspci -knn
root@debian:~# spci -nn
-bash: spci: command not found
root@debian:~# lspci -nn
root@debian:~# ifconfig
-bash: ifconfig: command not found
root@debian:~# iwconfig
-bash: iwconfig: command not found
root@debian:~# lsmod
Module Size Used by
cpufreq_userspace 16384 0
cpufreq_ondemand 16384 0
cpufreq_conservative 16384 0
cpufreq_powersave 16384 0
sd_mod 45056 0
sg 32768 0
sun4i_codec 36864 0
snd_soc_core 159744 1 sun4i_codec
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_pcm 90112 2 snd_pcm_dmaengine,snd_soc_core
snd_timer 28672 1 snd_pcm
ir_lirc_codec 16384 0
lirc_dev 16384 1 ir_lirc_codec
snd 61440 3 snd_timer,snd_soc_core,snd_pcm
soundcore 16384 1 snd
sunxi_cir 16384 0
rc_core 32768 4 ir_lirc_codec,lirc_dev,sunxi_cir
sunxi_wdt 16384 0
sun6i_dma 24576 0
evdev 24576 0
leds_gpio 16384 0
cpufreq_dt 16384 0
ip_tables 24576 0
x_tables 24576 1 ip_tables
autofs4 40960 2
ext4 593920 2
crc16 16384 1 ext4
mbcache 16384 1 ext4
jbd2 102400 1 ext4
crc32c_generic 16384 2
fscrypto 24576 1 ext4
ecb 16384 0
uas 20480 0
usb_storage 53248 1 uas
scsi_mod 196608 4 sd_mod,usb_storage,uas,sg
dwmac_sun8i 20480 0
mdio_mux 16384 1 dwmac_sun8i
stmmac_platform 20480 1 dwmac_sun8i
stmmac 102400 2 stmmac_platform,dwmac_sun8i
sunxi 20480 0
phy_generic 16384 2 sunxi
ohci_platform 16384 0
ohci_hcd 45056 1 ohci_platform
ehci_platform 16384 0
musb_hdrc 122880 1 sunxi
udc_core 36864 1 musb_hdrc
ehci_hcd 77824 1 ehci_platform
phy_sun4i_usb 20480 8 sunxi
usbcore 204800 7 usb_storage,ehci_hcd,musb_hdrc,uas,ohci_hcd,ehci _platform,ohci_platform
usb_common 16384 5 udc_core,sunxi,musb_hdrc,phy_sun4i_usb,usbcore
sunxi_mmc 20480 0
root@debian:~# lsusb
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 13fe:4200 Kingston Technology Company Inc.
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@debian:~# fdisk -l
Disk /dev/mmcblk0: 14.6 GiB, 15640559616 bytes, 30547968 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x16ae86a1
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 * 2048 499711 497664 243M 83 Linux
/dev/mmcblk0p2 499712 28547071 28047360 13.4G 83 Linux
/dev/mmcblk0p3 28549118 30545919 1996802 975M 5 Extended
/dev/mmcblk0p5 28549120 30545919 1996800 975M 82 Linux swap / Solaris
Disk /dev/sda: 3.6 GiB, 3888119808 bytes, 7593984 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xed0f86c8
Device Boot Start End Sectors Size Id Type
/dev/sda1 8192 7593983 7585792 3.6G b W95 FAT32
root@debian:~# cat /etc/apt/sources.list
#
# deb cdrom:[Debian GNU/Linux testing _Buster_ - Official Snapshot armhf xfce-CD Binary-1 20180319-06:37]/ buster main
#deb cdrom:[Debian GNU/Linux testing _Buster_ - Official Snapshot armhf xfce-CD Binary-1 20180319-06:37]/ buster main
deb http://mirror.mephi.ru/debian/ buster main
deb-src http://mirror.mephi.ru/debian/ buster main
deb http://security.debian.org/debian-security buster/updates main
deb-src http://security.debian.org/debian-security buster/updates main
# This system was installed using small removable media
# (e.g. netinst, live or single CD). The matching "deb cdrom"
# entries were disabled at the end of the installation process.
# For information about how to configure apt package sources,
# see the sources.list(5) manual.
root@debian:~# apt-get update
Hit:1 http://security.debian.org/debian-security buster/updates InRelease
Hit:2 http://mirror.mephi.ru/debian buster InRelease
Reading package lists... Done
root@debian:~# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@debian:~#
root@debian:~# startx
xauth: file /root/.Xauthority does not exist
X.Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-5-armmp-lpae armv7l Debian
Current Operating System: Linux debian 4.14.0-3-armmp-lpae #1 SMP Debian 4.14.17 -1 (2018-02-14) armv7l
Kernel command line: console=ttyS0,115200 rootwait panic=10 console=ttyS0,115200 quiet
Build Date: 27 January 2018 02:44:05AM
xorg-server 2:1.19.6-1 (https://www.debian.org/support)
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 01:27:52 2018
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional info rmation.
(EE)
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
root@debian:~#
root@debian:~# systemctl status -l lightdm.service
lightdm.service - Light Display Manager
Loaded: loaded (/lib/systemd/system/lightdm.service; indirect; vendor preset:
Active: failed (Result: exit-code) since Thu 2018-03-22 01:24:38 MSK; 4min 0s
Docs: man:lightdm(1)
Process: 423 ExecStart=/usr/sbin/lightdm (code=exited, status=1/FAILURE)
Process: 420 ExecStartPre=/bin/sh -c [ "$(cat /etc/X11/default-display-manager
Main PID: 423 (code=exited, status=1/FAILURE)
Mar 22 01:24:38 debian systemd[1]: lightdm.service: Service hold-off time over,
Mar 22 01:24:38 debian systemd[1]: lightdm.service: Scheduled restart job, resta
Mar 22 01:24:38 debian systemd[1]: Stopped Light Display Manager.
Mar 22 01:24:38 debian systemd[1]: lightdm.service: Start request repeated too q
Mar 22 01:24:38 debian systemd[1]: lightdm.service: Failed with result 'exit-cod
Mar 22 01:24:38 debian systemd[1]: Failed to start Light Display Manager.
Mar 22 01:24:38 debian systemd[1]: lightdm.service: Triggering _OnFailure_= depend
Mar 22 01:24:38 debian systemd[1]: lightdm.service: Failed to enqueue _OnFailure_=
root@debian:~#
root@debian:~# grep --color '(WW)\|(EE)' /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 216.392] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 216.427] (WW) Falling back to old probe method for modesetting
[ 216.427] (EE) open /dev/dri/card0: No such file or directory
[ 216.427] (WW) Falling back to old probe method for fbdev
[ 216.429] (EE) open /dev/fb0: No such file or directory
[ 216.429] (EE) No devices detected.
[ 216.429] (EE)
[ 216.430] (EE) no screens found(EE)
[ 216.430] (EE)
[ 216.430] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 216.430] (EE)
[ 216.431] (EE) Server terminated with error (1). Closing log file.
root@debian:~# cat /var/log/Xorg.0.log
[ 216.387]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 216.388] X Protocol Version 11, Revision 0
[ 216.388] Build Operating System: Linux 4.9.0-5-armmp-lpae armv7l Debian
[ 216.388] Current Operating System: Linux debian 4.14.0-3-armmp-lpae #1 SMP Debian 4.14.17-1 (2018-02-14) armv7l
[ 216.388] Kernel command line: console=ttyS0,115200 rootwait panic=10 console=ttyS0,115200 quiet
[ 216.388] Build Date: 27 January 2018 02:44:05AM
[ 216.388] xorg-server 2:1.19.6-1 (https://www.debian.org/support)
[ 216.388] Current version of pixman: 0.34.0
[ 216.388] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 216.389] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 216.389] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 01:27:52 2018
[ 216.390] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 216.391] (==) No Layout section. Using the first Screen section.
[ 216.391] (==) No screen section available. Using defaults.
[ 216.391] (**) |-->Screen "Default Screen Section" (0)
[ 216.391] (**) | |-->Monitor "<default monitor>"
[ 216.392] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 216.392] (==) Automatically adding devices
[ 216.392] (==) Automatically enabling devices
[ 216.392] (==) Automatically adding GPU devices
[ 216.392] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 216.392] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 216.393] Entry deleted from font path.
[ 216.393] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 216.393] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 216.393] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 216.393] (II) Loader magic: 0x5a2f60
[ 216.393] (II) Module ABI versions:
[ 216.393] X.Org ANSI C Emulation: 0.4
[ 216.393] X.Org Video Driver: 23.0
[ 216.393] X.Org XInput driver : 24.1
[ 216.393] X.Org Server Extension : 10.0
[ 216.398] (--) using VT number 2
[ 216.399] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 216.399] (II) no primary bus or device found
[ 216.400] (II) LoadModule: "glx"
[ 216.401] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 216.421] (II) Module glx: vendor="X.Org Foundation"
[ 216.422] compiled for 1.19.6, module version = 1.0.0
[ 216.422] ABI class: X.Org Server Extension, version 10.0
[ 216.422] (==) Matched modesetting as autoconfigured driver 0
[ 216.422] (==) Matched fbdev as autoconfigured driver 1
[ 216.422] (==) Assigned the driver to the xf86ConfigLayout
[ 216.422] (II) LoadModule: "modesetting"
[ 216.423] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 216.423] (II) Module modesetting: vendor="X.Org Foundation"
[ 216.424] compiled for 1.19.6, module version = 1.19.6
[ 216.424] Module class: X.Org Video Driver
[ 216.424] ABI class: X.Org Video Driver, version 23.0
[ 216.424] (II) LoadModule: "fbdev"
[ 216.424] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 216.425] (II) Module fbdev: vendor="X.Org Foundation"
[ 216.425] compiled for 1.19.0, module version = 0.4.4
[ 216.425] Module class: X.Org Video Driver
[ 216.425] ABI class: X.Org Video Driver, version 23.0
[ 216.425] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 216.425] (II) FBDEV: driver for framebuffer: fbdev
[ 216.427] (WW) Falling back to old probe method for modesetting
[ 216.427] (EE) open /dev/dri/card0: No such file or directory
[ 216.427] (WW) Falling back to old probe method for fbdev
[ 216.427] (II) Loading sub module "fbdevhw"
[ 216.428] (II) LoadModule: "fbdevhw"
[ 216.428] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 216.429] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 216.429] compiled for 1.19.6, module version = 0.0.2
[ 216.429] ABI class: X.Org Video Driver, version 23.0
[ 216.429] (EE) open /dev/fb0: No such file or directory
[ 216.429] (EE) No devices detected.
[ 216.429] (EE)
Fatal server error:
[ 216.430] (EE) no screens found(EE)
[ 216.430] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 216.430] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 216.430] (EE)
[ 216.431] (EE) Server terminated with error (1). Closing log file.
root@debian:~# cat /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.18.3, UID=0 PID=423
[+0.01s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf
[+0.01s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.01s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.02s] DEBUG: Registered seat module xlocal
[+0.02s] DEBUG: Registered seat module xremote
[+0.02s] DEBUG: Registered seat module unity
[+0.10s] DEBUG: Monitoring logind for seats
[+0.10s] DEBUG: New seat added from logind: seat0
[+0.10s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.10s] DEBUG: Seat seat0: Starting
[+0.10s] DEBUG: Seat seat0: Creating greeter session
[+0.10s] DEBUG: Seat seat0: Creating display server of type x
[+0.12s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory)
[+0.13s] DEBUG: Using VT 7
[+0.13s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.13s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
[+0.13s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+0.13s] DEBUG: DisplayServer x-0: Launching X Server
[+0.14s] DEBUG: Launching process 433: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.15s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+0.15s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.15s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.17s] WARNING: Could not enumerate user data directory /var/lib/lightdm/data: Error opening directory '/var/lib/lightdm/data': No such file or directory
[+0.34s] DEBUG: Process 433 exited with return value 1
[+0.34s] DEBUG: DisplayServer x-0: X server stopped
[+0.34s] DEBUG: Releasing VT 7
[+0.34s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0
[+0.34s] DEBUG: Seat seat0: Display server stopped
[+0.34s] DEBUG: Seat seat0: Stopping; greeter display server failed to start
[+0.34s] DEBUG: Seat seat0: Stopping
[+0.34s] DEBUG: Seat seat0: Stopping session
[+0.34s] DEBUG: Seat seat0: Session stopped
[+0.34s] DEBUG: Seat seat0: Stopped
[+0.34s] DEBUG: Required seat has stopped
[+0.34s] DEBUG: Stopping display manager
[+0.34s] DEBUG: Display manager stopped
[+0.34s] DEBUG: Stopping daemon
[+0.34s] DEBUG: Seat seat0: Stopping session
[+0.35s] DEBUG: Exiting with return value 1
root@debian:~# lightdm --test-mode
** (lightdm:776): WARNING **: Could not enumerate user data directory /var/lib/lightdm/data: Error opening directory '/var/lib/lightdm/data': No such file or directory
root@debian:~#
root@debian:~# lightdm --test-mode -d
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.18.3, UID=0 PID=789
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registered seat module xlocal
[+0.01s] DEBUG: Registered seat module xremote
[+0.01s] DEBUG: Registered seat module unity
[+0.05s] DEBUG: Monitoring logind for seats
[+0.05s] DEBUG: New seat added from logind: seat0
[+0.05s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.05s] DEBUG: Seat seat0: Starting
[+0.06s] DEBUG: Seat seat0: Creating greeter session
[+0.06s] DEBUG: Seat seat0: Creating display server of type x
[+0.06s] DEBUG: Could not run plymouth --ping: Failed to execute child process ?plymouth? (No such file or directory)
[+0.06s] DEBUG: Using VT 7
[+0.06s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.06s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
[+0.06s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+0.06s] DEBUG: DisplayServer x-0: Launching X Server
[+0.07s] DEBUG: Launching process 794: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.07s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+0.07s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.07s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.08s] WARNING: Could not enumerate user data directory /var/lib/lightdm/data: Error opening directory '/var/lib/lightdm/data': No such file or directory
[+0.16s] DEBUG: Process 794 exited with return value 1
[+0.17s] DEBUG: DisplayServer x-0: X server stopped
[+0.17s] DEBUG: Releasing VT 7
[+0.17s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0
[+0.17s] DEBUG: Seat seat0: Display server stopped
[+0.17s] DEBUG: Seat seat0: Stopping; greeter display server failed to start
[+0.17s] DEBUG: Seat seat0: Stopping
[+0.17s] DEBUG: Seat seat0: Stopping session
[+0.17s] DEBUG: Seat seat0: Session stopped
[+0.17s] DEBUG: Seat seat0: Stopped
[+0.17s] DEBUG: Required seat has stopped
[+0.17s] DEBUG: Stopping display manager
[+0.17s] DEBUG: Display manager stopped
[+0.17s] DEBUG: Stopping daemon
[+0.17s] DEBUG: Seat seat0: Stopping session
[+0.17s] DEBUG: Exiting with return value 1
root@debian:~#
root@debian:~# sudo systemctl enable lightdm
-bash: sudo: command not found
root@debian:~# systemctl enable lightdm
Synchronizing state of lightdm.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable lightdm
The unit files have no installation config (WantedBy, RequiredBy, Also, Alias
settings in the [Install] section, and DefaultInstance for template units).
This means they are not meant to be enabled using systemctl.
Possible reasons for having this kind of units are:
1) A unit may be statically enabled by being symlinked from another unit's
.wants/ or .requires/ directory.
2) A unit's purpose may be to act as a helper for some other unit which has
a requirement dependency on it.
3) A unit may be started when needed via activation (socket, path, timer,
D-Bus, udev, scripted systemctl call, ...).
4) In case of template units, the unit is meant to be enabled with some
instance name specified.
root@debian:~# systemctl list-unit-files | grep gdm
root@debian:~# systemctl list-unit-files | grep display
display-manager.service indirect
root@debian:~# systemctl list-unit-files | grep lightdm
lightdm.service indirect
root@debian:~# systemctl enable lightdm
Synchronizing state of lightdm.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable lightdm
The unit files have no installation config (WantedBy, RequiredBy, Also, Alias
settings in the [Install] section, and DefaultInstance for template units).
This means they are not meant to be enabled using systemctl.
Possible reasons for having this kind of units are:
1) A unit may be statically enabled by being symlinked from another unit's
.wants/ or .requires/ directory.
2) A unit's purpose may be to act as a helper for some other unit which has
a requirement dependency on it.
3) A unit may be started when needed via activation (socket, path, timer,
D-Bus, udev, scripted systemctl call, ...).
4) In case of template units, the unit is meant to be enabled with some
instance name specified.
root@debian:~# startx
X.Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-5-armmp-lpae armv7l Debian
Current Operating System: Linux debian 4.14.0-3-armmp-lpae #1 SMP Debian 4.14.17-1 (2018-02-14) armv7l
Kernel command line: console=ttyS0,115200 rootwait panic=10 console=ttyS0,115200 quiet
Build Date: 27 January 2018 02:44:05AM
xorg-server 2:1.19.6-1 (https://www.debian.org/support)
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 01:34:02 2018
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
root@debian:~# date
Thu Mar 22 01:34:24 MSK 2018
root@debian:~# apt-get install ethtool
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
ethtool
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 106 kB of archives.
After this operation, 346 kB of additional disk space will be used.
Get:1 http://mirror.mephi.ru/debian buster/main armhf ethtool armhf 1:4.11-1 [106 kB]
Fetched 106 kB in 1s (104 kB/s)
Selecting previously unselected package ethtool.
(Reading database ... 128789 files and directories currently installed.)
Preparing to unpack .../ethtool_1%3a4.11-1_armhf.deb ...
Unpacking ethtool (1:4.11-1) ...
Processing triggers for man-db (2.8.2-1) ...
Setting up ethtool (1:4.11-1) ...
root@debian:~# apt-get install net-tool
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package net-tool
root@debian:~# apt-get install net-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
net-tools
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 232 kB of archives.
After this operation, 786 kB of additional disk space will be used.
Get:1 http://mirror.mephi.ru/debian buster/main armhf net-tools armhf 1.60+git20161116.90da8a0-2 [232 kB]
Fetched 232 kB in 1s (287 kB/s)
Selecting previously unselected package net-tools.
(Reading database ... 128800 files and directories currently installed.)
Preparing to unpack .../net-tools_1.60+git20161116.90da8a0-2_armhf.deb ...
Unpacking net-tools (1.60+git20161116.90da8a0-2) ...
Processing triggers for man-db (2.8.2-1) ...
Setting up net-tools (1.60+git20161116.90da8a0-2) ...
root@debian:~# [ 1923.624480] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[ 1923.632523] sun4i-codec 1c22c00.codec: Failed to register our card
[ 1924.154668] usb 8-1: firmware: failed to load rtlwifi/rtl8192cufw_TMSC.bin (-2)
[ 1924.181866] usb 8-1: firmware: failed to load rtlwifi/rtl8192cufw.bin (-2)
[ 1924.235694] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[ 1924.243726] sun4i-codec 1c22c00.codec: Failed to register our card
[ 1926.067973] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006.
[ 1926.074958] rtl8192c_common: Firmware is not ready to run!
[ 1927.028973] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006.
[ 1927.035958] rtl8192c_common: Firmware is not ready to run!
ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.3.100 netmask 255.255.255.0 broadcast 192.168.3.255
inet6 xxxx::81:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x20<link>
ether 0X:8X:Xf:XX:XX:0X txqueuelen 1000 (Ethernet)
RX packets 317 bytes 362449 (353.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 318 bytes 24405 (23.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 36
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 12 bytes 636 (636.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12 bytes 636 (636.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlxf8d1111997ae: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether XX:b6:X3:20:Xf:X txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
root@debian:~#dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.0-3-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 7. 3.0 (Debian 7.3.0-3)) #1 SMP Debian 4.14.17-1 (2018-02-14)
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Xunlong Orange Pi PC
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c10f39c0, node_mem_map ef6f9000
[ 0.000000] DMA zone: 1728 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 17 pages/cpu @ef6a8000 s38028 r8192 d23412 u69632
[ 0.000000] pcpu-alloc: s38028 r8192 d23412 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: console=ttyS0,115200 rootwait panic=10 console=ttyS0,115200 q uiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 988864K/1048576K available (8192K kernel code, 1086K rwdata, 2456K rodata, 2048K init, 332K bss, 43328K reserved, 16384K cma-reserved, 245760K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0a00000 (10208 kB)
.init : 0xc0e00000 - 0xc1000000 (2048 kB)
.data : 0xc1000000 - 0xc110f89c (1087 kB)
.bss : 0xc11168a4 - 0xc11699e4 ( 333 kB)
[ 0.000000] ftrace: allocating 31612 entries in 93 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851 949 ns
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max _idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000015] Switching to timer-based delay loop, resolution 41ns
[ 0.000761] Console: colour dummy device 80x30
[ 0.000799] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 B ogoMIPS (lpj=96000)
[ 0.000811] pid_max: default: 32768 minimum: 301
[ 0.001057] Security Framework initialized
[ 0.001066] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001154] AppArmor: AppArmor initialized
[ 0.001237] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001248] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002154] CPU: Testing write buffer coherency: ok
[ 0.002521] /cpus/cpu@0 missing clock-frequency property
[ 0.002548] /cpus/cpu@1 missing clock-frequency property
[ 0.002568] /cpus/cpu@2 missing clock-frequency property
[ 0.002588] /cpus/cpu@3 missing clock-frequency property
[ 0.002600] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003005] Setting up static identity map for 0x40200000 - 0x402000a0
[ 0.003623] Hierarchical SRCU implementation.
[ 0.006438] EFI services will not be available.
[ 0.006887] smp: Bringing up secondary CPUs ...
[ 0.008948] smp: Brought up 1 node, 1 CPU
[ 0.008959] SMP: Total of 1 processors activated (48.00 BogoMIPS).
[ 0.008963] CPU: All CPU(s) started in SVC mode.
[ 0.009803] devtmpfs: initialized
[ 0.013773] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.014103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 764504 1785100000 ns
[ 0.014122] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.015220] pinctrl core: initialized pinctrl subsystem
[ 0.016284] DMI not present or invalid.
[ 0.016704] NET: Registered protocol family 16
[ 0.018569] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.020439] No ATAGs?
[ 0.020524] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.020530] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.021141] Serial: AMBA PL011 UART driver
[ 0.033731] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.038366] vgaarb: loaded
[ 0.039130] media: Linux media interface: v0.10
[ 0.039164] Linux video capture interface: v2.00
[ 0.039219] pps_core: LinuxPPS API ver. 1 registered
[ 0.039224] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@lin ux.it>
[ 0.039242] PTP clock support registered
[ 0.039358] dmi: Firmware registration failed.
[ 0.040767] clocksource: Switched to clocksource arch_sys_counter
[ 0.103386] VFS: Disk quotas dquot_6.6.0
[ 0.103497] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.104101] AppArmor: AppArmor Filesystem Enabled
[ 0.113207] NET: Registered protocol family 2
[ 0.113910] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.113991] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.114104] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.114223] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.114279] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.114527] NET: Registered protocol family 1
[ 0.114560] PCI: CLS 0 bytes, default 64
[ 0.114987] Unpacking initramfs...
[ 1.297290] Freeing initrd memory: 17160K
[ 1.297509] kvm [1]: HYP mode not available
[ 1.299287] audit: initializing netlink subsys (disabled)
[ 1.300064] audit: type=2000 audit(1.296:1): state=initialized audit_enabled=0 res=1
[ 1.300146] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.300257] zbud: loaded
[ 4.060794] Key type asymmetric registered
[ 4.060802] Asymmetric key parser 'x509' registered
[ 4.060876] bounce: pool size: 64 pages
[ 4.060955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 4.061203] io scheduler noop registered
[ 4.061209] io scheduler deadline registered
[ 4.061303] io scheduler cfq registered (default)
[ 4.061309] io scheduler mq-deadline registered
[ 4.066212] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 4.067879] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 4.072369] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.074130] console [ttyS0] disabled
[ 4.094351] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 39, base_baud = 1500000) is a U6_16 550A
[ 4.124377] console [ttyS0] enabled
[ 4.124958] Serial: AMBA driver
[ 4.127256] libphy: Fixed MDIO Bus: probed
[ 4.127907] mousedev: PS/2 mouse device common for all mice
[ 4.129434] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[ 4.129442] sun6i-rtc 1f00000.rtc: RTC enabled
[ 4.131272] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.131282] dmi-sysfs: dmi entry is absent.
[ 4.136278] NET: Registered protocol family 10
[ 4.137360] Segment Routing with IPv6
[ 4.137420] mip6: Mobile IPv6
[ 4.137431] NET: Registered protocol family 17
[ 4.137442] mpls_gso: MPLS GSO support
[ 4.137544] ThumbEE CPU extension supported.
[ 4.137554] Registering SWP/SWPB emulation handler
[ 4.138255] registered taskstats version 1
[ 4.138317] zswap: loaded using pool lzo/zbud
[ 4.138524] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.138538] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 4.145622] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0
[ 4.145784] sun6i-rtc 1f00000.rtc: setting system clock to 2018-03-21 22:24:21 UTC (1521671061 )
[ 4.145793] sr_init: No PMIC hook to init smartreflex
[ 4.145906] sr_init: platform driver register failed for SR
[ 4.151798] vcc3v0: disabling
[ 4.151804] vcc3v3: disabling
[ 4.151809] vcc5v0: disabling
[ 4.151812] usb0-vbus: disabling
[ 4.157394] Freeing unused kernel memory: 2048K
[ 4.858394] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 4.891280] usbcore: registered new interface driver usbfs
[ 4.891340] usbcore: registered new interface driver hub
[ 4.896967] sunxi-mmc 1c0f000.mmc: base:0xf096f000 irq:23
[ 4.919451] usbcore: registered new device driver usb
[ 4.927403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.928479] ehci-platform: EHCI generic platform driver
[ 4.930552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.931436] ohci-platform: OHCI generic platform driver
[ 4.939322] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 4.939384] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[ 4.942168] ehci-platform 1c1a000.usb: irq 25, io mem 0x01c1a000
[ 4.956864] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 4.957259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.957268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.957274] usb usb1: Product: EHCI Host Controller
[ 4.957280] usb usb1: Manufacturer: Linux 4.14.0-3-armmp-lpae ehci_hcd
[ 4.957286] usb usb1: SerialNumber: 1c1a000.usb
[ 4.957984] hub 1-0:1.0: USB hub found
[ 4.958036] hub 1-0:1.0: 1 port detected
[ 4.960052] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 4.960086] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[ 4.960513] ohci-platform 1c1a400.usb: irq 26, io mem 0x01c1a400
[ 4.969459] mmc0: host does not support reading read-only switch, assuming write-enable
[ 4.971390] mmc0: Problem switching card into high-speed mode!
[ 4.971539] mmc0: new SDHC card at address 0001
[ 4.980845] mmcblk0: mmc0:0001 SD16G 14.6 GiB
[ 4.984033] mmcblk0: p1 p2 p3 < p5 >
[ 5.025023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.025037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.025044] usb usb2: Product: Generic Platform OHCI controller
[ 5.025050] usb usb2: Manufacturer: Linux 4.14.0-3-armmp-lpae ohci_hcd
[ 5.025056] usb usb2: SerialNumber: 1c1a400.usb
[ 5.025776] hub 2-0:1.0: USB hub found
[ 5.025819] hub 2-0:1.0: 1 port detected
[ 5.026859] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not foun d, using dummy regulator
[ 5.027393] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 5.027406] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
[ 5.027638] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.027647] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.027653] usb usb3: Product: MUSB HDRC host driver
[ 5.027659] usb usb3: Manufacturer: Linux 4.14.0-3-armmp-lpae musb-hcd
[ 5.027665] usb usb3: SerialNumber: musb-hdrc.1.auto
[ 5.028251] hub 3-0:1.0: USB hub found
[ 5.028288] hub 3-0:1.0: 1 port detected
[ 5.029650] ehci-platform 1c1b000.usb: EHCI Host Controller
[ 5.029690] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 4
[ 5.030282] ehci-platform 1c1b000.usb: irq 27, io mem 0x01c1b000
[ 5.044823] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[ 5.045174] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.045183] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.045189] usb usb4: Product: EHCI Host Controller
[ 5.045195] usb usb4: Manufacturer: Linux 4.14.0-3-armmp-lpae ehci_hcd
[ 5.045201] usb usb4: SerialNumber: 1c1b000.usb
[ 5.045888] hub 4-0:1.0: USB hub found
[ 5.045938] hub 4-0:1.0: 1 port detected
[ 5.046740] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[ 5.046786] dwmac-sun8i 1c30000.ethernet: No regulator found
[ 5.046909] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expe ct 58000)
[ 5.046926] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[ 5.046932] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[ 5.046938] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[ 5.046944] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[ 5.046950] dwmac-sun8i 1c30000.ethernet: COE Type 2
[ 5.046956] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[ 5.047104] libphy: stmmac: probed
[ 5.047805] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
[ 5.047920] libphy: mdio_mux: probed
[ 5.047942] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
[ 5.047950] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
[ 5.070749] libphy: mdio_mux: probed
[ 5.071512] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[ 5.071547] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 5
[ 5.072061] ohci-platform 1c1b400.usb: irq 28, io mem 0x01c1b400
[ 5.137015] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.137030] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.137036] usb usb5: Product: Generic Platform OHCI controller
[ 5.137043] usb usb5: Manufacturer: Linux 4.14.0-3-armmp-lpae ohci_hcd
[ 5.137049] usb usb5: SerialNumber: 1c1b400.usb
[ 5.141024] hub 5-0:1.0: USB hub found
[ 5.141071] hub 5-0:1.0: 1 port detected
[ 5.141809] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 5.141841] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 6
[ 5.142415] ehci-platform 1c1c000.usb: irq 29, io mem 0x01c1c000
[ 5.157438] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 5.157804] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.157813] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.157820] usb usb6: Product: EHCI Host Controller
[ 5.157826] usb usb6: Manufacturer: Linux 4.14.0-3-armmp-lpae ehci_hcd
[ 5.157832] usb usb6: SerialNumber: 1c1c000.usb
[ 5.158505] hub 6-0:1.0: USB hub found
[ 5.158554] hub 6-0:1.0: 1 port detected
[ 5.159332] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 5.159363] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[ 5.159792] ohci-platform 1c1c400.usb: irq 30, io mem 0x01c1c400
[ 5.226573] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.226587] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.226594] usb usb7: Product: Generic Platform OHCI controller
[ 5.226600] usb usb7: Manufacturer: Linux 4.14.0-3-armmp-lpae ohci_hcd
[ 5.226607] usb usb7: SerialNumber: 1c1c400.usb
[ 5.229934] hub 7-0:1.0: USB hub found
[ 5.229981] hub 7-0:1.0: 1 port detected
[ 5.233567] ehci-platform 1c1d000.usb: EHCI Host Controller
[ 5.233602] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 8
[ 5.234077] ehci-platform 1c1d000.usb: irq 31, io mem 0x01c1d000
[ 5.248837] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[ 5.249209] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.249219] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.249225] usb usb8: Product: EHCI Host Controller
[ 5.249231] usb usb8: Manufacturer: Linux 4.14.0-3-armmp-lpae ehci_hcd
[ 5.249237] usb usb8: SerialNumber: 1c1d000.usb
[ 5.249888] hub 8-0:1.0: USB hub found
[ 5.249935] hub 8-0:1.0: 1 port detected
[ 5.250781] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[ 5.250820] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 9
[ 5.251151] ohci-platform 1c1d400.usb: irq 32, io mem 0x01c1d400
[ 5.315833] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.315848] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.315854] usb usb9: Product: Generic Platform OHCI controller
[ 5.315860] usb usb9: Manufacturer: Linux 4.14.0-3-armmp-lpae ohci_hcd
[ 5.315866] usb usb9: SerialNumber: 1c1d400.usb
[ 5.318424] hub 9-0:1.0: USB hub found
[ 5.319860] hub 9-0:1.0: 1 port detected
[ 5.492785] usb 6-1: new high-speed USB device number 2 using ehci-platform
[ 5.654134] usb 6-1: New USB device found, idVendor=13fe, idProduct=4200
[ 5.654149] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.654155] usb 6-1: Product: USB DISK 2.0
[ 5.654161] usb 6-1: Manufacturer:
[ 5.654167] usb 6-1: SerialNumber: 070A7822F6F05F45
[ 5.683602] SCSI subsystem initialized
[ 5.688664] usb-storage 6-1:1.0: USB Mass Storage device detected
[ 5.689579] scsi host0: usb-storage 6-1:1.0
[ 5.690030] usbcore: registered new interface driver usb-storage
[ 5.691530] usbcore: registered new interface driver uas
[ 5.849914] PM: Starting manual resume from disk
[ 5.850987] PM: Image not found (code -22)
[ 6.150327] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.723077] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[ 7.271399] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.313814] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARM OR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.314309] systemd[1]: Detected architecture arm.
[ 7.321060] systemd[1]: Set hostname to <debian>.
[ 7.895955] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 7.895976] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 8.279853] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automou nt Point.
[ 8.280722] systemd[1]: Listening on Journal Socket.
[ 8.283134] systemd[1]: Created slice User and Session Slice.
[ 8.283602] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.283979] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.486412] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 9.433379] systemd-journald[180]: Received request to flush runtime journal from PID 1
[ 10.604225] cpu cpu0: failed to get clock: -2
[ 10.647314] cpufreq-dt: probe of cpufreq-dt failed with error -2
[ 11.321475] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 11.477351] lirc_dev: IR Remote Control driver registered, major 242
[ 11.491648] IR LIRC bridge handler initialized
[ 11.492671] Registered IR keymap rc-empty
[ 11.492918] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
[ 11.493136] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input1
[ 11.513254] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
[ 11.513391] sunxi-ir 1f02000.ir: initialized sunXi IR driver
[ 11.721440] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[ 11.729439] sun4i-codec 1c22c00.codec: Failed to register our card
[ 11.904289] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.974243] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[ 11.982278] sun4i-codec 1c22c00.codec: Failed to register our card
[ 11.992412] sd 0:0:0:0: [sda] 7593984 512-byte logical blocks: (3.89 GB/3.62 GiB)
[ 11.993138] sd 0:0:0:0: [sda] Write Protect is off
[ 11.993150] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 11.993868] sd 0:0:0:0: [sda] No Caching mode page found
[ 11.999236] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 12.131726] sda: sda1
[ 12.142080] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 12.241376] Adding 998396k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:998396k SSFS
[ 13.092340] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem
[ 13.110529] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[ 18.095553] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.097143] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[ 18.105109] sun4i-codec 1c22c00.codec: Failed to register our card
[ 18.119812] Generic PHY 0.1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0.1:01, ir q=POLL)
[ 18.134715] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[ 18.134731] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[ 18.135745] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.193405] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 20.193449] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 192.387663] random: crng init done
[ 1923.457289] usb 8-1: new high-speed USB device number 2 using ehci-platform
[ 1923.615227] usb 8-1: New USB device found, idVendor=0bda, idProduct=8176
[ 1923.615240] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1923.615247] usb 8-1: Product: 802.11n WLAN Adapter
[ 1923.615253] usb 8-1: Manufacturer: Realtek
[ 1923.615259] usb 8-1: SerialNumber: 00e04c000001
[ 1923.624480] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[ 1923.632523] sun4i-codec 1c22c00.codec: Failed to register our card
[ 1924.065907] rtl8192cu: Chip version 0x10
[ 1924.154120] rtl8192cu: Board Type 0
[ 1924.154340] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 1924.154563] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 1924.154668] usb 8-1: firmware: failed to load rtlwifi/rtl8192cufw_TMSC.bin (-2)
[ 1924.162063] usb 8-1: Direct firmware load for rtlwifi/rtl8192cufw_TMSC.bin failed with error - 2
[ 1924.181866] usb 8-1: firmware: failed to load rtlwifi/rtl8192cufw.bin (-2)
[ 1924.188817] usb 8-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2
[ 1924.188829] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
[ 1924.228780] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 1924.235694] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[ 1924.243726] sun4i-codec 1c22c00.codec: Failed to register our card
[ 1924.253752] usbcore: registered new interface driver rtl8192cu
[ 1924.330504] rtl8192cu 8-1:1.0 wlxf8d1111997ae: renamed from wlan0
[ 1924.455113] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready
[ 1924.478850] rtl8192cu: MAC auto ON okay!
[ 1924.514755] rtl8192cu: Tx queue select: 0x05
[ 1926.067973] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006.
[ 1926.074958] rtl8192c_common: Firmware is not ready to run!
[ 1926.435867] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready
[ 1926.472089] rtl8192cu: MAC auto ON okay!
[ 1926.505851] rtl8192cu: Tx queue select: 0x05
[ 1927.028973] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006.
[ 1927.035958] rtl8192c_common: Firmware is not ready to run!
[ 1927.399057] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready
[ 1927.475185] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready
[ 2272.198975] rtl8192cu: MAC auto ON okay!
[ 2272.239357] rtl8192cu: Tx queue select: 0x05
[ 2272.772974] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006.
[ 2272.779959] rtl8192c_common: Firmware is not ready to run!
[ 2273.144503] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not readyPackage: installation-reports Boot method: Very good, TFTP+USB.iso+ ttl pl2303+network Image version: http://cdimage.debian.org/cdimage/weekly-builds/armhf/iso-cd/debian-testing-armhf-xfce-CD-1.iso http://d-i.debian.org/daily-images/armhf/daily/hd-media/hd-media.tar.gz vmlinuz initrd.gz sun8i-h3-orangepi-pc.dtb Date: 22.03.2018_00:05AM msk Machine: Orange pi pc Processor: H3 Quad-core Cortex-A7 Memory: 1GB DDR3 SDRAM Partitions: # df -Tl Filesystem Type 1K-blocks Used Available Use% Mounted on udev devtmpfs 494432 0 494432 0% /dev tmpfs tmpfs 102448 3160 99288 4% /run /dev/mmcblk0p2 ext4 13738032 2965672 10054792 23% / tmpfs tmpfs 512228 0 512228 0% /dev/shm tmpfs tmpfs 5120 0 5120 0% /run/lock tmpfs tmpfs 512228 0 512228 0% /sys/fs/cgroup /dev/mmcblk0p1 ext2 240972 26455 202076 12% /boot tmpfs tmpfs 102444 0 102444 0% /run/user/0 lspci -knn и lspci -nn: blank Base System Installation Checklist: [O] = OK, [E] = Ошибка (описать подробности ниже), [ ] = не пробовал Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [ ] Install boot loader: [0] Overall install: [ ] BOOT: =========================================================== tftpboot ${kernel_addr_r} vmlinuz tftpboot ${fdt_addr_r} sun8i-h3-orangepi-pc.dtb tftpboot ${ramdisk_addr_r} initrd.gz =============== bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r} =================================================================== Comments/Problems: Hi, Install Very good. The problem with the display,you cannot run.The monitor console fades after the system boots. Orange pi pc and Orange pi pc_Plus root@debian:~# reboot [ 94.943836] reboot: Restarting system U-Boot SPL 2017.09-armbian (Nov 22 2017 - 16:49:05) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2017.09-armbian (Nov 22 2017 - 16:49:05 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 In: serial Out: vidconsole Err: vidconsole Net: phy interface0 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 USB4: USB EHCI 1.00 USB5: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 2 USB Device(s) found scanning bus 4 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop Unknown command 'hdd' - try 'help' Unknown command 'ide' - try 'help' => run mmc_boot switch to partitions #0, OK mmc0 is current device ** Bad device specification mmc -bootable ** Scanning mmc :1... Found U-Boot script /boot.scr 2627 bytes read in 150 ms (16.6 KiB/s) ## Executing script at 43100000 Mainline u-boot / new-style environment detected. 4121088 bytes read in 366 ms (10.7 MiB/s) 15271 bytes read in 185 ms (80.1 KiB/s) 17570483 bytes read in 1329 ms (12.6 MiB/s) Booting Debian 4.14.0-3-armmp-lpae from mmc :1... ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Using Device Tree in place at 43000000, end 43006ba6 Starting kernel ... [ 0.002521] /cpus/cpu@0 missing clock-frequency property [ 0.002548] /cpus/cpu@1 missing clock-frequency property [ 0.002568] /cpus/cpu@2 missing clock-frequency property [ 0.002588] /cpus/cpu@3 missing clock-frequency property [ 0.039358] dmi: Firmware registration failed. [ 1.297509] kvm [1]: HYP mode not available [ 4.131282] dmi-sysfs: dmi entry is absent. [ 4.145906] sr_init: platform driver register failed for SR /dev/mmcblk0p2: clean, 138385/876544 files, 798718/3505920 blocks [ 10.604225] cpu cpu0: failed to get clock: -2 [ 11.721440] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not r egistered [ 11.729439] sun4i-codec 1c22c00.codec: Failed to register our card [ 11.974243] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not r egistered [ 11.982278] sun4i-codec 1c22c00.codec: Failed to register our card [ 11.993868] sd 0:0:0:0: [sda] No Caching mode page found [ 11.999236] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 18.097143] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not r egistered [ 18.105109] sun4i-codec 1c22c00.codec: Failed to register our card Debian GNU/Linux buster/sid debian ttyS0 debian login: root Password: Last login: Thu Mar 22 01:22:41 MSK 2018 on ttyS0 Linux debian 4.14.0-3-armmp-lpae #1 SMP Debian 4.14.17-1 (2018-02-14) armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# root@debian:~# df -Tl Filesystem Type 1K-blocks Used Available Use% Mounted on udev devtmpfs 494432 0 494432 0% /dev tmpfs tmpfs 102448 3164 99284 4% /run /dev/mmcblk0p2 ext4 13738032 2909436 10111028 23% / tmpfs tmpfs 512228 0 512228 0% /dev/shm tmpfs tmpfs 5120 0 5120 0% /run/lock tmpfs tmpfs 512228 0 512228 0% /sys/fs/cgroup /dev/mmcblk0p1 ext2 240972 26455 202076 12% /boot tmpfs tmpfs 102444 0 102444 0% /run/user/0 root@debian:~# root@debian:~# lspci -knn root@debian:~# spci -nn -bash: spci: command not found root@debian:~# lspci -nn root@debian:~# ifconfig -bash: ifconfig: command not found root@debian:~# iwconfig -bash: iwconfig: command not found root@debian:~# lsmod Module Size Used by cpufreq_userspace 16384 0 cpufreq_ondemand 16384 0 cpufreq_conservative 16384 0 cpufreq_powersave 16384 0 sd_mod 45056 0 sg 32768 0 sun4i_codec 36864 0 snd_soc_core 159744 1 sun4i_codec snd_pcm_dmaengine 16384 1 snd_soc_core snd_pcm 90112 2 snd_pcm_dmaengine,snd_soc_core snd_timer 28672 1 snd_pcm ir_lirc_codec 16384 0 lirc_dev 16384 1 ir_lirc_codec snd 61440 3 snd_timer,snd_soc_core,snd_pcm soundcore 16384 1 snd sunxi_cir 16384 0 rc_core 32768 4 ir_lirc_codec,lirc_dev,sunxi_cir sunxi_wdt 16384 0 sun6i_dma 24576 0 evdev 24576 0 leds_gpio 16384 0 cpufreq_dt 16384 0 ip_tables 24576 0 x_tables 24576 1 ip_tables autofs4 40960 2 ext4 593920 2 crc16 16384 1 ext4 mbcache 16384 1 ext4 jbd2 102400 1 ext4 crc32c_generic 16384 2 fscrypto 24576 1 ext4 ecb 16384 0 uas 20480 0 usb_storage 53248 1 uas scsi_mod 196608 4 sd_mod,usb_storage,uas,sg dwmac_sun8i 20480 0 mdio_mux 16384 1 dwmac_sun8i stmmac_platform 20480 1 dwmac_sun8i stmmac 102400 2 stmmac_platform,dwmac_sun8i sunxi 20480 0 phy_generic 16384 2 sunxi ohci_platform 16384 0 ohci_hcd 45056 1 ohci_platform ehci_platform 16384 0 musb_hdrc 122880 1 sunxi udc_core 36864 1 musb_hdrc ehci_hcd 77824 1 ehci_platform phy_sun4i_usb 20480 8 sunxi usbcore 204800 7 usb_storage,ehci_hcd,musb_hdrc,uas,ohci_hcd,ehci _platform,ohci_platform usb_common 16384 5 udc_core,sunxi,musb_hdrc,phy_sun4i_usb,usbcore sunxi_mmc 20480 0 root@debian:~# lsusb Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 13fe:4200 Kingston Technology Company Inc. Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@debian:~# fdisk -l Disk /dev/mmcblk0: 14.6 GiB, 15640559616 bytes, 30547968 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x16ae86a1 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 * 2048 499711 497664 243M 83 Linux /dev/mmcblk0p2 499712 28547071 28047360 13.4G 83 Linux /dev/mmcblk0p3 28549118 30545919 1996802 975M 5 Extended /dev/mmcblk0p5 28549120 30545919 1996800 975M 82 Linux swap / Solaris Disk /dev/sda: 3.6 GiB, 3888119808 bytes, 7593984 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xed0f86c8 Device Boot Start End Sectors Size Id Type /dev/sda1 8192 7593983 7585792 3.6G b W95 FAT32 root@debian:~# cat /etc/apt/sources.list # # deb cdrom:[Debian GNU/Linux testing _Buster_ - Official Snapshot armhf xfce-CD Binary-1 20180319-06:37]/ buster main #deb cdrom:[Debian GNU/Linux testing _Buster_ - Official Snapshot armhf xfce-CD Binary-1 20180319-06:37]/ buster main deb http://mirror.mephi.ru/debian/ buster main deb-src http://mirror.mephi.ru/debian/ buster main deb http://security.debian.org/debian-security buster/updates main deb-src http://security.debian.org/debian-security buster/updates main # This system was installed using small removable media # (e.g. netinst, live or single CD). The matching "deb cdrom" # entries were disabled at the end of the installation process. # For information about how to configure apt package sources, # see the sources.list(5) manual. root@debian:~# apt-get update Hit:1 http://security.debian.org/debian-security buster/updates InRelease Hit:2 http://mirror.mephi.ru/debian buster InRelease Reading package lists... Done root@debian:~# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@debian:~# root@debian:~# startx xauth: file /root/.Xauthority does not exist X.Org X Server 1.19.6 Release Date: 2017-12-20 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.9.0-5-armmp-lpae armv7l Debian Current Operating System: Linux debian 4.14.0-3-armmp-lpae #1 SMP Debian 4.14.17 -1 (2018-02-14) armv7l Kernel command line: console=ttyS0,115200 rootwait panic=10 console=ttyS0,115200 quiet Build Date: 27 January 2018 02:44:05AM xorg-server 2:1.19.6-1 (https://www.debian.org/support) Current version of pixman: 0.34.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 01:27:52 2018 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) Fatal server error: (EE) no screens found(EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional info rmation. (EE) (EE) Server terminated with error (1). Closing log file. xinit: giving up xinit: unable to connect to X server: Connection refused xinit: server error root@debian:~# root@debian:~# systemctl status -l lightdm.service lightdm.service - Light Display Manager Loaded: loaded (/lib/systemd/system/lightdm.service; indirect; vendor preset: Active: failed (Result: exit-code) since Thu 2018-03-22 01:24:38 MSK; 4min 0s Docs: man:lightdm(1) Process: 423 ExecStart=/usr/sbin/lightdm (code=exited, status=1/FAILURE) Process: 420 ExecStartPre=/bin/sh -c [ "$(cat /etc/X11/default-display-manager Main PID: 423 (code=exited, status=1/FAILURE) Mar 22 01:24:38 debian systemd[1]: lightdm.service: Service hold-off time over, Mar 22 01:24:38 debian systemd[1]: lightdm.service: Scheduled restart job, resta Mar 22 01:24:38 debian systemd[1]: Stopped Light Display Manager. Mar 22 01:24:38 debian systemd[1]: lightdm.service: Start request repeated too q Mar 22 01:24:38 debian systemd[1]: lightdm.service: Failed with result 'exit-cod Mar 22 01:24:38 debian systemd[1]: Failed to start Light Display Manager. Mar 22 01:24:38 debian systemd[1]: lightdm.service: Triggering OnFailure= depend Mar 22 01:24:38 debian systemd[1]: lightdm.service: Failed to enqueue OnFailure= root@debian:~# root@debian:~# grep --color '(WW)\|(EE)' /var/log/Xorg.0.log (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 216.392] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 216.427] (WW) Falling back to old probe method for modesetting [ 216.427] (EE) open /dev/dri/card0: No such file or directory [ 216.427] (WW) Falling back to old probe method for fbdev [ 216.429] (EE) open /dev/fb0: No such file or directory [ 216.429] (EE) No devices detected. [ 216.429] (EE) [ 216.430] (EE) no screens found(EE) [ 216.430] (EE) [ 216.430] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 216.430] (EE) [ 216.431] (EE) Server terminated with error (1). Closing log file. root@debian:~# cat /var/log/Xorg.0.log [ 216.387] X.Org X Server 1.19.6 Release Date: 2017-12-20 [ 216.388] X Protocol Version 11, Revision 0 [ 216.388] Build Operating System: Linux 4.9.0-5-armmp-lpae armv7l Debian [ 216.388] Current Operating System: Linux debian 4.14.0-3-armmp-lpae #1 SMP Debian 4.14.17-1 (2018-02-14) armv7l [ 216.388] Kernel command line: console=ttyS0,115200 rootwait panic=10 console=ttyS0,115200 quiet [ 216.388] Build Date: 27 January 2018 02:44:05AM [ 216.388] xorg-server 2:1.19.6-1 (https://www.debian.org/support) [ 216.388] Current version of pixman: 0.34.0 [ 216.388] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 216.389] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 216.389] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 01:27:52 2018 [ 216.390] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 216.391] (==) No Layout section. Using the first Screen section. [ 216.391] (==) No screen section available. Using defaults. [ 216.391] (**) |-->Screen "Default Screen Section" (0) [ 216.391] (**) | |-->Monitor "<default monitor>" [ 216.392] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 216.392] (==) Automatically adding devices [ 216.392] (==) Automatically enabling devices [ 216.392] (==) Automatically adding GPU devices [ 216.392] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 216.392] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 216.393] Entry deleted from font path. [ 216.393] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 216.393] (==) ModulePath set to "/usr/lib/xorg/modules" [ 216.393] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 216.393] (II) Loader magic: 0x5a2f60 [ 216.393] (II) Module ABI versions: [ 216.393] X.Org ANSI C Emulation: 0.4 [ 216.393] X.Org Video Driver: 23.0 [ 216.393] X.Org XInput driver : 24.1 [ 216.393] X.Org Server Extension : 10.0 [ 216.398] (--) using VT number 2 [ 216.399] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 216.399] (II) no primary bus or device found [ 216.400] (II) LoadModule: "glx" [ 216.401] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 216.421] (II) Module glx: vendor="X.Org Foundation" [ 216.422] compiled for 1.19.6, module version = 1.0.0 [ 216.422] ABI class: X.Org Server Extension, version 10.0 [ 216.422] (==) Matched modesetting as autoconfigured driver 0 [ 216.422] (==) Matched fbdev as autoconfigured driver 1 [ 216.422] (==) Assigned the driver to the xf86ConfigLayout [ 216.422] (II) LoadModule: "modesetting" [ 216.423] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 216.423] (II) Module modesetting: vendor="X.Org Foundation" [ 216.424] compiled for 1.19.6, module version = 1.19.6 [ 216.424] Module class: X.Org Video Driver [ 216.424] ABI class: X.Org Video Driver, version 23.0 [ 216.424] (II) LoadModule: "fbdev" [ 216.424] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 216.425] (II) Module fbdev: vendor="X.Org Foundation" [ 216.425] compiled for 1.19.0, module version = 0.4.4 [ 216.425] Module class: X.Org Video Driver [ 216.425] ABI class: X.Org Video Driver, version 23.0 [ 216.425] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 216.425] (II) FBDEV: driver for framebuffer: fbdev [ 216.427] (WW) Falling back to old probe method for modesetting [ 216.427] (EE) open /dev/dri/card0: No such file or directory [ 216.427] (WW) Falling back to old probe method for fbdev [ 216.427] (II) Loading sub module "fbdevhw" [ 216.428] (II) LoadModule: "fbdevhw" [ 216.428] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 216.429] (II) Module fbdevhw: vendor="X.Org Foundation" [ 216.429] compiled for 1.19.6, module version = 0.0.2 [ 216.429] ABI class: X.Org Video Driver, version 23.0 [ 216.429] (EE) open /dev/fb0: No such file or directory [ 216.429] (EE) No devices detected. [ 216.429] (EE) Fatal server error: [ 216.430] (EE) no screens found(EE) [ 216.430] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 216.430] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 216.430] (EE) [ 216.431] (EE) Server terminated with error (1). Closing log file. root@debian:~# cat /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.18.3, UID=0 PID=423 [+0.01s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d [+0.01s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf [+0.01s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d [+0.01s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d [+0.01s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf [+0.01s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Registered seat module xlocal [+0.02s] DEBUG: Registered seat module xremote [+0.02s] DEBUG: Registered seat module unity [+0.10s] DEBUG: Monitoring logind for seats [+0.10s] DEBUG: New seat added from logind: seat0 [+0.10s] DEBUG: Seat seat0: Loading properties from config section Seat:* [+0.10s] DEBUG: Seat seat0: Starting [+0.10s] DEBUG: Seat seat0: Creating greeter session [+0.10s] DEBUG: Seat seat0: Creating display server of type x [+0.12s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory) [+0.13s] DEBUG: Using VT 7 [+0.13s] DEBUG: Seat seat0: Starting local X display on VT 7 [+0.13s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log [+0.13s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0 [+0.13s] DEBUG: DisplayServer x-0: Launching X Server [+0.14s] DEBUG: Launching process 433: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+0.15s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0 [+0.15s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.15s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+0.17s] WARNING: Could not enumerate user data directory /var/lib/lightdm/data: Error opening directory '/var/lib/lightdm/data': No such file or directory [+0.34s] DEBUG: Process 433 exited with return value 1 [+0.34s] DEBUG: DisplayServer x-0: X server stopped [+0.34s] DEBUG: Releasing VT 7 [+0.34s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0 [+0.34s] DEBUG: Seat seat0: Display server stopped [+0.34s] DEBUG: Seat seat0: Stopping; greeter display server failed to start [+0.34s] DEBUG: Seat seat0: Stopping [+0.34s] DEBUG: Seat seat0: Stopping session [+0.34s] DEBUG: Seat seat0: Session stopped [+0.34s] DEBUG: Seat seat0: Stopped [+0.34s] DEBUG: Required seat has stopped [+0.34s] DEBUG: Stopping display manager [+0.34s] DEBUG: Display manager stopped [+0.34s] DEBUG: Stopping daemon [+0.34s] DEBUG: Seat seat0: Stopping session [+0.35s] DEBUG: Exiting with return value 1 root@debian:~# lightdm --test-mode ** (lightdm:776): WARNING **: Could not enumerate user data directory /var/lib/lightdm/data: Error opening directory '/var/lib/lightdm/data': No such file or directory root@debian:~# root@debian:~# lightdm --test-mode -d [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting Light Display Manager 1.18.3, UID=0 PID=789 [+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf [+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d [+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.01s] DEBUG: Registered seat module xlocal [+0.01s] DEBUG: Registered seat module xremote [+0.01s] DEBUG: Registered seat module unity [+0.05s] DEBUG: Monitoring logind for seats [+0.05s] DEBUG: New seat added from logind: seat0 [+0.05s] DEBUG: Seat seat0: Loading properties from config section Seat:* [+0.05s] DEBUG: Seat seat0: Starting [+0.06s] DEBUG: Seat seat0: Creating greeter session [+0.06s] DEBUG: Seat seat0: Creating display server of type x [+0.06s] DEBUG: Could not run plymouth --ping: Failed to execute child process ?plymouth? (No such file or directory) [+0.06s] DEBUG: Using VT 7 [+0.06s] DEBUG: Seat seat0: Starting local X display on VT 7 [+0.06s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log [+0.06s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0 [+0.06s] DEBUG: DisplayServer x-0: Launching X Server [+0.07s] DEBUG: Launching process 794: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+0.07s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0 [+0.07s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.07s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+0.08s] WARNING: Could not enumerate user data directory /var/lib/lightdm/data: Error opening directory '/var/lib/lightdm/data': No such file or directory [+0.16s] DEBUG: Process 794 exited with return value 1 [+0.17s] DEBUG: DisplayServer x-0: X server stopped [+0.17s] DEBUG: Releasing VT 7 [+0.17s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0 [+0.17s] DEBUG: Seat seat0: Display server stopped [+0.17s] DEBUG: Seat seat0: Stopping; greeter display server failed to start [+0.17s] DEBUG: Seat seat0: Stopping [+0.17s] DEBUG: Seat seat0: Stopping session [+0.17s] DEBUG: Seat seat0: Session stopped [+0.17s] DEBUG: Seat seat0: Stopped [+0.17s] DEBUG: Required seat has stopped [+0.17s] DEBUG: Stopping display manager [+0.17s] DEBUG: Display manager stopped [+0.17s] DEBUG: Stopping daemon [+0.17s] DEBUG: Seat seat0: Stopping session [+0.17s] DEBUG: Exiting with return value 1 root@debian:~# root@debian:~# sudo systemctl enable lightdm -bash: sudo: command not found root@debian:~# systemctl enable lightdm Synchronizing state of lightdm.service with SysV service script with /lib/systemd/systemd-sysv-install. Executing: /lib/systemd/systemd-sysv-install enable lightdm The unit files have no installation config (WantedBy, RequiredBy, Also, Alias settings in the [Install] section, and DefaultInstance for template units). This means they are not meant to be enabled using systemctl. Possible reasons for having this kind of units are: 1) A unit may be statically enabled by being symlinked from another unit's .wants/ or .requires/ directory. 2) A unit's purpose may be to act as a helper for some other unit which has a requirement dependency on it. 3) A unit may be started when needed via activation (socket, path, timer, D-Bus, udev, scripted systemctl call, ...). 4) In case of template units, the unit is meant to be enabled with some instance name specified. root@debian:~# systemctl list-unit-files | grep gdm root@debian:~# systemctl list-unit-files | grep display display-manager.service indirect root@debian:~# systemctl list-unit-files | grep lightdm lightdm.service indirect root@debian:~# systemctl enable lightdm Synchronizing state of lightdm.service with SysV service script with /lib/systemd/systemd-sysv-install. Executing: /lib/systemd/systemd-sysv-install enable lightdm The unit files have no installation config (WantedBy, RequiredBy, Also, Alias settings in the [Install] section, and DefaultInstance for template units). This means they are not meant to be enabled using systemctl. Possible reasons for having this kind of units are: 1) A unit may be statically enabled by being symlinked from another unit's .wants/ or .requires/ directory. 2) A unit's purpose may be to act as a helper for some other unit which has a requirement dependency on it. 3) A unit may be started when needed via activation (socket, path, timer, D-Bus, udev, scripted systemctl call, ...). 4) In case of template units, the unit is meant to be enabled with some instance name specified. root@debian:~# startx X.Org X Server 1.19.6 Release Date: 2017-12-20 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.9.0-5-armmp-lpae armv7l Debian Current Operating System: Linux debian 4.14.0-3-armmp-lpae #1 SMP Debian 4.14.17-1 (2018-02-14) armv7l Kernel command line: console=ttyS0,115200 rootwait panic=10 console=ttyS0,115200 quiet Build Date: 27 January 2018 02:44:05AM xorg-server 2:1.19.6-1 (https://www.debian.org/support) Current version of pixman: 0.34.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 01:34:02 2018 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) Fatal server error: (EE) no screens found(EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. xinit: giving up xinit: unable to connect to X server: Connection refused xinit: server error root@debian:~# date Thu Mar 22 01:34:24 MSK 2018 root@debian:~# apt-get install ethtool Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: ethtool 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 106 kB of archives. After this operation, 346 kB of additional disk space will be used. Get:1 http://mirror.mephi.ru/debian buster/main armhf ethtool armhf 1:4.11-1 [106 kB] Fetched 106 kB in 1s (104 kB/s) Selecting previously unselected package ethtool. (Reading database ... 128789 files and directories currently installed.) Preparing to unpack .../ethtool_1%3a4.11-1_armhf.deb ... Unpacking ethtool (1:4.11-1) ... Processing triggers for man-db (2.8.2-1) ... Setting up ethtool (1:4.11-1) ... root@debian:~# apt-get install net-tool Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package net-tool root@debian:~# apt-get install net-tools Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: net-tools 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 232 kB of archives. After this operation, 786 kB of additional disk space will be used. Get:1 http://mirror.mephi.ru/debian buster/main armhf net-tools armhf 1.60+git20161116.90da8a0-2 [232 kB] Fetched 232 kB in 1s (287 kB/s) Selecting previously unselected package net-tools. (Reading database ... 128800 files and directories currently installed.) Preparing to unpack .../net-tools_1.60+git20161116.90da8a0-2_armhf.deb ... Unpacking net-tools (1.60+git20161116.90da8a0-2) ... Processing triggers for man-db (2.8.2-1) ... Setting up net-tools (1.60+git20161116.90da8a0-2) ... root@debian:~# [ 1923.624480] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered [ 1923.632523] sun4i-codec 1c22c00.codec: Failed to register our card [ 1924.154668] usb 8-1: firmware: failed to load rtlwifi/rtl8192cufw_TMSC.bin (-2) [ 1924.181866] usb 8-1: firmware: failed to load rtlwifi/rtl8192cufw.bin (-2) [ 1924.235694] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered [ 1924.243726] sun4i-codec 1c22c00.codec: Failed to register our card [ 1926.067973] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006. [ 1926.074958] rtl8192c_common: Firmware is not ready to run! [ 1927.028973] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006. [ 1927.035958] rtl8192c_common: Firmware is not ready to run! ifconfig -a eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.3.100 netmask 255.255.255.0 broadcast 192.168.3.255 inet6 xxxx::81:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x20<link> ether 0X:8X:Xf:XX:XX:0X txqueuelen 1000 (Ethernet) RX packets 317 bytes 362449 (353.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 318 bytes 24405 (23.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 36 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 12 bytes 636 (636.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12 bytes 636 (636.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlxf8d1111997ae: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether XX:b6:X3:20:Xf:X txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@debian:~#dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-3-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 7. 3.0 (Debian 7.3.0-3)) #1 SMP Debian 4.14.17-1 (2018-02-14) [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Xunlong Orange Pi PC [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c10f39c0, node_mem_map ef6f9000 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @ef6a8000 s38028 r8192 d23412 u69632 [ 0.000000] pcpu-alloc: s38028 r8192 d23412 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 rootwait panic=10 console=ttyS0,115200 q uiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 988864K/1048576K available (8192K kernel code, 1086K rwdata, 2456K rodata, 2048K init, 332K bss, 43328K reserved, 16384K cma-reserved, 245760K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0a00000 (10208 kB) .init : 0xc0e00000 - 0xc1000000 (2048 kB) .data : 0xc1000000 - 0xc110f89c (1087 kB) .bss : 0xc11168a4 - 0xc11699e4 ( 333 kB) [ 0.000000] ftrace: allocating 31612 entries in 93 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851 949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max _idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000015] Switching to timer-based delay loop, resolution 41ns [ 0.000761] Console: colour dummy device 80x30 [ 0.000799] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 B ogoMIPS (lpj=96000) [ 0.000811] pid_max: default: 32768 minimum: 301 [ 0.001057] Security Framework initialized [ 0.001066] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.001154] AppArmor: AppArmor initialized [ 0.001237] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001248] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002154] CPU: Testing write buffer coherency: ok [ 0.002521] /cpus/cpu@0 missing clock-frequency property [ 0.002548] /cpus/cpu@1 missing clock-frequency property [ 0.002568] /cpus/cpu@2 missing clock-frequency property [ 0.002588] /cpus/cpu@3 missing clock-frequency property [ 0.002600] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003005] Setting up static identity map for 0x40200000 - 0x402000a0 [ 0.003623] Hierarchical SRCU implementation. [ 0.006438] EFI services will not be available. [ 0.006887] smp: Bringing up secondary CPUs ... [ 0.008948] smp: Brought up 1 node, 1 CPU [ 0.008959] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.008963] CPU: All CPU(s) started in SVC mode. [ 0.009803] devtmpfs: initialized [ 0.013773] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.014103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 764504 1785100000 ns [ 0.014122] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.015220] pinctrl core: initialized pinctrl subsystem [ 0.016284] DMI not present or invalid. [ 0.016704] NET: Registered protocol family 16 [ 0.018569] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.020439] No ATAGs? [ 0.020524] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.020530] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.021141] Serial: AMBA PL011 UART driver [ 0.033731] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.038366] vgaarb: loaded [ 0.039130] media: Linux media interface: v0.10 [ 0.039164] Linux video capture interface: v2.00 [ 0.039219] pps_core: LinuxPPS API ver. 1 registered [ 0.039224] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@lin ux.it> [ 0.039242] PTP clock support registered [ 0.039358] dmi: Firmware registration failed. [ 0.040767] clocksource: Switched to clocksource arch_sys_counter [ 0.103386] VFS: Disk quotas dquot_6.6.0 [ 0.103497] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.104101] AppArmor: AppArmor Filesystem Enabled [ 0.113207] NET: Registered protocol family 2 [ 0.113910] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.113991] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.114104] TCP: Hash tables configured (established 8192 bind 8192) [ 0.114223] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.114279] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.114527] NET: Registered protocol family 1 [ 0.114560] PCI: CLS 0 bytes, default 64 [ 0.114987] Unpacking initramfs... [ 1.297290] Freeing initrd memory: 17160K [ 1.297509] kvm [1]: HYP mode not available [ 1.299287] audit: initializing netlink subsys (disabled) [ 1.300064] audit: type=2000 audit(1.296:1): state=initialized audit_enabled=0 res=1 [ 1.300146] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.300257] zbud: loaded [ 4.060794] Key type asymmetric registered [ 4.060802] Asymmetric key parser 'x509' registered [ 4.060876] bounce: pool size: 64 pages [ 4.060955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 4.061203] io scheduler noop registered [ 4.061209] io scheduler deadline registered [ 4.061303] io scheduler cfq registered (default) [ 4.061309] io scheduler mq-deadline registered [ 4.066212] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 4.067879] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 4.072369] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.074130] console [ttyS0] disabled [ 4.094351] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 39, base_baud = 1500000) is a U6_16 550A [ 4.124377] console [ttyS0] enabled [ 4.124958] Serial: AMBA driver [ 4.127256] libphy: Fixed MDIO Bus: probed [ 4.127907] mousedev: PS/2 mouse device common for all mice [ 4.129434] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 [ 4.129442] sun6i-rtc 1f00000.rtc: RTC enabled [ 4.131272] ledtrig-cpu: registered to indicate activity on CPUs [ 4.131282] dmi-sysfs: dmi entry is absent. [ 4.136278] NET: Registered protocol family 10 [ 4.137360] Segment Routing with IPv6 [ 4.137420] mip6: Mobile IPv6 [ 4.137431] NET: Registered protocol family 17 [ 4.137442] mpls_gso: MPLS GSO support [ 4.137544] ThumbEE CPU extension supported. [ 4.137554] Registering SWP/SWPB emulation handler [ 4.138255] registered taskstats version 1 [ 4.138317] zswap: loaded using pool lzo/zbud [ 4.138524] AppArmor: AppArmor sha1 policy hashing enabled [ 4.138538] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 4.145622] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0 [ 4.145784] sun6i-rtc 1f00000.rtc: setting system clock to 2018-03-21 22:24:21 UTC (1521671061 ) [ 4.145793] sr_init: No PMIC hook to init smartreflex [ 4.145906] sr_init: platform driver register failed for SR [ 4.151798] vcc3v0: disabling [ 4.151804] vcc3v3: disabling [ 4.151809] vcc5v0: disabling [ 4.151812] usb0-vbus: disabling [ 4.157394] Freeing unused kernel memory: 2048K [ 4.858394] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 4.891280] usbcore: registered new interface driver usbfs [ 4.891340] usbcore: registered new interface driver hub [ 4.896967] sunxi-mmc 1c0f000.mmc: base:0xf096f000 irq:23 [ 4.919451] usbcore: registered new device driver usb [ 4.927403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.928479] ehci-platform: EHCI generic platform driver [ 4.930552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.931436] ohci-platform: OHCI generic platform driver [ 4.939322] ehci-platform 1c1a000.usb: EHCI Host Controller [ 4.939384] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 [ 4.942168] ehci-platform 1c1a000.usb: irq 25, io mem 0x01c1a000 [ 4.956864] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 [ 4.957259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.957268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.957274] usb usb1: Product: EHCI Host Controller [ 4.957280] usb usb1: Manufacturer: Linux 4.14.0-3-armmp-lpae ehci_hcd [ 4.957286] usb usb1: SerialNumber: 1c1a000.usb [ 4.957984] hub 1-0:1.0: USB hub found [ 4.958036] hub 1-0:1.0: 1 port detected [ 4.960052] ohci-platform 1c1a400.usb: Generic Platform OHCI controller [ 4.960086] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 [ 4.960513] ohci-platform 1c1a400.usb: irq 26, io mem 0x01c1a400 [ 4.969459] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.971390] mmc0: Problem switching card into high-speed mode! [ 4.971539] mmc0: new SDHC card at address 0001 [ 4.980845] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 4.984033] mmcblk0: p1 p2 p3 < p5 > [ 5.025023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.025037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.025044] usb usb2: Product: Generic Platform OHCI controller [ 5.025050] usb usb2: Manufacturer: Linux 4.14.0-3-armmp-lpae ohci_hcd [ 5.025056] usb usb2: SerialNumber: 1c1a400.usb [ 5.025776] hub 2-0:1.0: USB hub found [ 5.025819] hub 2-0:1.0: 1 port detected [ 5.026859] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not foun d, using dummy regulator [ 5.027393] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 5.027406] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3 [ 5.027638] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.027647] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.027653] usb usb3: Product: MUSB HDRC host driver [ 5.027659] usb usb3: Manufacturer: Linux 4.14.0-3-armmp-lpae musb-hcd [ 5.027665] usb usb3: SerialNumber: musb-hdrc.1.auto [ 5.028251] hub 3-0:1.0: USB hub found [ 5.028288] hub 3-0:1.0: 1 port detected [ 5.029650] ehci-platform 1c1b000.usb: EHCI Host Controller [ 5.029690] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 4 [ 5.030282] ehci-platform 1c1b000.usb: irq 27, io mem 0x01c1b000 [ 5.044823] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 5.045174] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.045183] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.045189] usb usb4: Product: EHCI Host Controller [ 5.045195] usb usb4: Manufacturer: Linux 4.14.0-3-armmp-lpae ehci_hcd [ 5.045201] usb usb4: SerialNumber: 1c1b000.usb [ 5.045888] hub 4-0:1.0: USB hub found [ 5.045938] hub 4-0:1.0: 1 port detected [ 5.046740] dwmac-sun8i 1c30000.ethernet: PTP uses main clock [ 5.046786] dwmac-sun8i 1c30000.ethernet: No regulator found [ 5.046909] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expe ct 58000) [ 5.046926] dwmac-sun8i 1c30000.ethernet: Chain mode enabled [ 5.046932] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported [ 5.046938] dwmac-sun8i 1c30000.ethernet: Normal descriptors [ 5.046944] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported [ 5.046950] dwmac-sun8i 1c30000.ethernet: COE Type 2 [ 5.046956] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported [ 5.047104] libphy: stmmac: probed [ 5.047805] dwmac-sun8i 1c30000.ethernet: Found internal PHY node [ 5.047920] libphy: mdio_mux: probed [ 5.047942] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY [ 5.047950] dwmac-sun8i 1c30000.ethernet: Powering internal PHY [ 5.070749] libphy: mdio_mux: probed [ 5.071512] ohci-platform 1c1b400.usb: Generic Platform OHCI controller [ 5.071547] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 5 [ 5.072061] ohci-platform 1c1b400.usb: irq 28, io mem 0x01c1b400 [ 5.137015] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.137030] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.137036] usb usb5: Product: Generic Platform OHCI controller [ 5.137043] usb usb5: Manufacturer: Linux 4.14.0-3-armmp-lpae ohci_hcd [ 5.137049] usb usb5: SerialNumber: 1c1b400.usb [ 5.141024] hub 5-0:1.0: USB hub found [ 5.141071] hub 5-0:1.0: 1 port detected [ 5.141809] ehci-platform 1c1c000.usb: EHCI Host Controller [ 5.141841] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 6 [ 5.142415] ehci-platform 1c1c000.usb: irq 29, io mem 0x01c1c000 [ 5.157438] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 5.157804] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.157813] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.157820] usb usb6: Product: EHCI Host Controller [ 5.157826] usb usb6: Manufacturer: Linux 4.14.0-3-armmp-lpae ehci_hcd [ 5.157832] usb usb6: SerialNumber: 1c1c000.usb [ 5.158505] hub 6-0:1.0: USB hub found [ 5.158554] hub 6-0:1.0: 1 port detected [ 5.159332] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 5.159363] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7 [ 5.159792] ohci-platform 1c1c400.usb: irq 30, io mem 0x01c1c400 [ 5.226573] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.226587] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.226594] usb usb7: Product: Generic Platform OHCI controller [ 5.226600] usb usb7: Manufacturer: Linux 4.14.0-3-armmp-lpae ohci_hcd [ 5.226607] usb usb7: SerialNumber: 1c1c400.usb [ 5.229934] hub 7-0:1.0: USB hub found [ 5.229981] hub 7-0:1.0: 1 port detected [ 5.233567] ehci-platform 1c1d000.usb: EHCI Host Controller [ 5.233602] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 8 [ 5.234077] ehci-platform 1c1d000.usb: irq 31, io mem 0x01c1d000 [ 5.248837] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 [ 5.249209] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.249219] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.249225] usb usb8: Product: EHCI Host Controller [ 5.249231] usb usb8: Manufacturer: Linux 4.14.0-3-armmp-lpae ehci_hcd [ 5.249237] usb usb8: SerialNumber: 1c1d000.usb [ 5.249888] hub 8-0:1.0: USB hub found [ 5.249935] hub 8-0:1.0: 1 port detected [ 5.250781] ohci-platform 1c1d400.usb: Generic Platform OHCI controller [ 5.250820] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 9 [ 5.251151] ohci-platform 1c1d400.usb: irq 32, io mem 0x01c1d400 [ 5.315833] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.315848] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.315854] usb usb9: Product: Generic Platform OHCI controller [ 5.315860] usb usb9: Manufacturer: Linux 4.14.0-3-armmp-lpae ohci_hcd [ 5.315866] usb usb9: SerialNumber: 1c1d400.usb [ 5.318424] hub 9-0:1.0: USB hub found [ 5.319860] hub 9-0:1.0: 1 port detected [ 5.492785] usb 6-1: new high-speed USB device number 2 using ehci-platform [ 5.654134] usb 6-1: New USB device found, idVendor=13fe, idProduct=4200 [ 5.654149] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.654155] usb 6-1: Product: USB DISK 2.0 [ 5.654161] usb 6-1: Manufacturer: [ 5.654167] usb 6-1: SerialNumber: 070A7822F6F05F45 [ 5.683602] SCSI subsystem initialized [ 5.688664] usb-storage 6-1:1.0: USB Mass Storage device detected [ 5.689579] scsi host0: usb-storage 6-1:1.0 [ 5.690030] usbcore: registered new interface driver usb-storage [ 5.691530] usbcore: registered new interface driver uas [ 5.849914] PM: Starting manual resume from disk [ 5.850987] PM: Image not found (code -22) [ 6.150327] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.723077] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 [ 7.271399] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.313814] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARM OR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.314309] systemd[1]: Detected architecture arm. [ 7.321060] systemd[1]: Set hostname to <debian>. [ 7.895955] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.895976] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 8.279853] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automou nt Point. [ 8.280722] systemd[1]: Listening on Journal Socket. [ 8.283134] systemd[1]: Created slice User and Session Slice. [ 8.283602] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.283979] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.486412] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 9.433379] systemd-journald[180]: Received request to flush runtime journal from PID 1 [ 10.604225] cpu cpu0: failed to get clock: -2 [ 10.647314] cpufreq-dt: probe of cpufreq-dt failed with error -2 [ 11.321475] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 11.477351] lirc_dev: IR Remote Control driver registered, major 242 [ 11.491648] IR LIRC bridge handler initialized [ 11.492671] Registered IR keymap rc-empty [ 11.492918] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0 [ 11.493136] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input1 [ 11.513254] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0 [ 11.513391] sunxi-ir 1f02000.ir: initialized sunXi IR driver [ 11.721440] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered [ 11.729439] sun4i-codec 1c22c00.codec: Failed to register our card [ 11.904289] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.974243] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered [ 11.982278] sun4i-codec 1c22c00.codec: Failed to register our card [ 11.992412] sd 0:0:0:0: [sda] 7593984 512-byte logical blocks: (3.89 GB/3.62 GiB) [ 11.993138] sd 0:0:0:0: [sda] Write Protect is off [ 11.993150] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 11.993868] sd 0:0:0:0: [sda] No Caching mode page found [ 11.999236] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 12.131726] sda: sda1 [ 12.142080] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 12.241376] Adding 998396k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:998396k SSFS [ 13.092340] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem [ 13.110529] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) [ 18.095553] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.097143] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered [ 18.105109] sun4i-codec 1c22c00.codec: Failed to register our card [ 18.119812] Generic PHY 0.1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0.1:01, ir q=POLL) [ 18.134715] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available [ 18.134731] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW [ 18.135745] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.193405] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 20.193449] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 192.387663] random: crng init done [ 1923.457289] usb 8-1: new high-speed USB device number 2 using ehci-platform [ 1923.615227] usb 8-1: New USB device found, idVendor=0bda, idProduct=8176 [ 1923.615240] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1923.615247] usb 8-1: Product: 802.11n WLAN Adapter [ 1923.615253] usb 8-1: Manufacturer: Realtek [ 1923.615259] usb 8-1: SerialNumber: 00e04c000001 [ 1923.624480] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered [ 1923.632523] sun4i-codec 1c22c00.codec: Failed to register our card [ 1924.065907] rtl8192cu: Chip version 0x10 [ 1924.154120] rtl8192cu: Board Type 0 [ 1924.154340] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 1924.154563] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 1924.154668] usb 8-1: firmware: failed to load rtlwifi/rtl8192cufw_TMSC.bin (-2) [ 1924.162063] usb 8-1: Direct firmware load for rtlwifi/rtl8192cufw_TMSC.bin failed with error - 2 [ 1924.181866] usb 8-1: firmware: failed to load rtlwifi/rtl8192cufw.bin (-2) [ 1924.188817] usb 8-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2 [ 1924.188829] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin [ 1924.228780] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 1924.235694] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered [ 1924.243726] sun4i-codec 1c22c00.codec: Failed to register our card [ 1924.253752] usbcore: registered new interface driver rtl8192cu [ 1924.330504] rtl8192cu 8-1:1.0 wlxf8d1111997ae: renamed from wlan0 [ 1924.455113] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready [ 1924.478850] rtl8192cu: MAC auto ON okay! [ 1924.514755] rtl8192cu: Tx queue select: 0x05 [ 1926.067973] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006. [ 1926.074958] rtl8192c_common: Firmware is not ready to run! [ 1926.435867] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready [ 1926.472089] rtl8192cu: MAC auto ON okay! [ 1926.505851] rtl8192cu: Tx queue select: 0x05 [ 1927.028973] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006. [ 1927.035958] rtl8192c_common: Firmware is not ready to run! [ 1927.399057] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready [ 1927.475185] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready [ 2272.198975] rtl8192cu: MAC auto ON okay! [ 2272.239357] rtl8192cu: Tx queue select: 0x05 [ 2272.772974] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00000006. [ 2272.779959] rtl8192c_common: Firmware is not ready to run! [ 2273.144503] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111997ae: link is not ready
--- End Message ---
--- Begin Message ---
- To: debian-boot@lists.debian.org
- Cc: 706219-done@bugs.debian.org, 739299-done@bugs.debian.org, 741206-done@bugs.debian.org, 742647-done@bugs.debian.org, 798896-done@bugs.debian.org, 799570-done@bugs.debian.org, 805342-done@bugs.debian.org, 738865-done@bugs.debian.org, 790708-done@bugs.debian.org, 804154-done@bugs.debian.org, 851429-done@bugs.debian.org, 851432-done@bugs.debian.org, 851539-done@bugs.debian.org, 851740-done@bugs.debian.org, 852779-done@bugs.debian.org, 853187-done@bugs.debian.org, 854087-done@bugs.debian.org, 854428-done@bugs.debian.org, 854455-done@bugs.debian.org, 854857-done@bugs.debian.org, 856178-done@bugs.debian.org, 857048-done@bugs.debian.org, 857179-done@bugs.debian.org, 857695-done@bugs.debian.org, 857839-done@bugs.debian.org, 858139-done@bugs.debian.org, 858181-done@bugs.debian.org, 858299-done@bugs.debian.org, 859233-done@bugs.debian.org, 860286-done@bugs.debian.org, 860478-done@bugs.debian.org, 860809-done@bugs.debian.org, 861015-done@bugs.debian.org, 861083-done@bugs.debian.org, 861380-done@bugs.debian.org, 861469-done@bugs.debian.org, 862010-done@bugs.debian.org, 862025-done@bugs.debian.org, 862521-done@bugs.debian.org, 863178-done@bugs.debian.org, 863241-done@bugs.debian.org, 863613-done@bugs.debian.org, 864935-done@bugs.debian.org, 864991-done@bugs.debian.org, 865473-done@bugs.debian.org, 865811-done@bugs.debian.org, 866240-done@bugs.debian.org, 866597-done@bugs.debian.org, 866681-done@bugs.debian.org, 866966-done@bugs.debian.org, 867064-done@bugs.debian.org, 867066-done@bugs.debian.org, 867285-done@bugs.debian.org, 868085-done@bugs.debian.org, 868338-done@bugs.debian.org, 868942-done@bugs.debian.org, 868994-done@bugs.debian.org, 869118-done@bugs.debian.org, 869895-done@bugs.debian.org, 870331-done@bugs.debian.org, 871323-done@bugs.debian.org, 871569-done@bugs.debian.org, 872764-done@bugs.debian.org, 874314-done@bugs.debian.org, 874385-done@bugs.debian.org, 875788-done@bugs.debian.org, 876352-done@bugs.debian.org, 877467-done@bugs.debian.org, 879514-done@bugs.debian.org, 879659-done@bugs.debian.org, 879688-done@bugs.debian.org, 879987-done@bugs.debian.org, 880021-done@bugs.debian.org, 880054-done@bugs.debian.org, 880104-done@bugs.debian.org, 880947-done@bugs.debian.org, 882732-done@bugs.debian.org, 884348-done@bugs.debian.org, 885026-done@bugs.debian.org, 886023-done@bugs.debian.org, 886025-done@bugs.debian.org, 886970-done@bugs.debian.org, 887670-done@bugs.debian.org, 889673-done@bugs.debian.org, 889717-done@bugs.debian.org, 889993-done@bugs.debian.org, 890192-done@bugs.debian.org, 890404-done@bugs.debian.org, 891973-done@bugs.debian.org, 892405-done@bugs.debian.org, 893432-done@bugs.debian.org, 893748-done@bugs.debian.org, 894059-done@bugs.debian.org, 894169-done@bugs.debian.org, 894231-done@bugs.debian.org, 894270-done@bugs.debian.org, 895700-done@bugs.debian.org, 897559-done@bugs.debian.org, 899251-done@bugs.debian.org, 899321-done@bugs.debian.org, 900609-done@bugs.debian.org, 900666-done@bugs.debian.org, 900738-done@bugs.debian.org, 901851-done@bugs.debian.org, 903047-done@bugs.debian.org, 903244-done@bugs.debian.org, 904421-done@bugs.debian.org, 905827-done@bugs.debian.org, 906093-done@bugs.debian.org, 907575-done@bugs.debian.org, 909294-done@bugs.debian.org, 909918-done@bugs.debian.org, 910023-done@bugs.debian.org, 915368-done@bugs.debian.org, 916068-done@bugs.debian.org, 916381-done@bugs.debian.org, 916386-done@bugs.debian.org, 917350-done@bugs.debian.org, 917940-done@bugs.debian.org, 919842-done@bugs.debian.org, 921264-done@bugs.debian.org, 921861-done@bugs.debian.org, 922115-done@bugs.debian.org, 923252-done@bugs.debian.org, 923524-done@bugs.debian.org, 924179-done@bugs.debian.org, 924563-done@bugs.debian.org, 925537-done@bugs.debian.org, 926111-done@bugs.debian.org, 926448-done@bugs.debian.org, 926538-done@bugs.debian.org, 926975-done@bugs.debian.org, 926980-done@bugs.debian.org, 927811-done@bugs.debian.org, 928192-done@bugs.debian.org, 928413-done@bugs.debian.org, 928414-done@bugs.debian.org, 928490-done@bugs.debian.org, 929243-done@bugs.debian.org, 929476-done@bugs.debian.org, 931241-done@bugs.debian.org, 931587-done@bugs.debian.org, 931918-done@bugs.debian.org, 944285-done@bugs.debian.org, 944762-done@bugs.debian.org
- Subject: Re: Mass-closing old installation-report bugs --- round 5
- From: Holger Wansing <hwansing@mailbox.org>
- Date: Fri, 21 Aug 2020 04:58:02 +0200
- Message-id: <[🔎] 20200821045802.07acb7c9ded347064600db2d@mailbox.org>
- In-reply-to: <[🔎] 20200804000901.ada4d3e7ac8e2e0050ab3eb3@mailbox.org>
- References: <[🔎] 20200804000901.ada4d3e7ac8e2e0050ab3eb3@mailbox.org>
Hi, Holger Wansing <hwansing@mailbox.org> wrote: > > I'm closing the reports below. > > That's installation-reports for Debian 7 with > - undefined errors > - problems which are likely to have been fixed in the meantime > - successful installation > > Because of the age, there is no chance to analyse them further and therefore > they are no longer relevant or of any use for current releases: And thank you for filing these installation bug reports, they have been very useful at the time they were filed! If you know, that the issue you reported (and gets closed here) is still existing in recent installation images, please file a new report for that! round 5 (for Debian 7 / 8 / 9 / pre-buster ): https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=706219 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739299 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=741206 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742647 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=798896 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=799570 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=805342 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=738865 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=790708 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=804154 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=851429 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=851432 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=851539 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=851740 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=852779 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=853187 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=854087 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=854428 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=854455 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=854857 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=856178 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=857048 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=857179 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=857695 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=857839 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858139 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858181 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858299 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=859233 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=860286 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=860478 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=860809 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=861015 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=861083 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=861380 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=861469 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=862010 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=862025 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=862521 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=863178 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=863241 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=863613 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=864935 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=864991 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=865473 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=865811 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866240 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866597 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866681 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866966 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=867064 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=867066 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=867285 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=868085 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=868338 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=868942 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=868994 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=869118 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=869895 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870331 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=871323 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=871569 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=872764 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=874314 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=874385 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=875788 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=876352 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=877467 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879514 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879659 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879688 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879987 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=880021 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=880054 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=880104 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=880947 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882732 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884348 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=885026 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=886023 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=886025 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=886970 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=887670 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=889673 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=889717 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=889993 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=890192 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=890404 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891973 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=892405 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=893432 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=893748 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=894059 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=894169 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=894231 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=894270 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=895700 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=897559 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=899251 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=899321 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900609 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900666 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900738 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=901851 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=903047 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=903244 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904421 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=905827 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=906093 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=907575 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=909294 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=909918 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=910023 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915368 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916068 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916381 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916386 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917350 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917940 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=919842 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=921264 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=921861 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=922115 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=923252 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=923524 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=924179 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=924563 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=925537 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=926111 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=926448 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=926538 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=926975 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=926980 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=927811 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=928192 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=928413 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=928414 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=928490 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=929243 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=929476 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931241 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931587 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931918 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=944285 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=944762 -- Holger Wansing <hwansing@mailbox.org> PGP-Fingerprint: 496A C6E8 1442 4B34 8508 3529 59F1 87CA 156E B076
--- End Message ---