Your message dated Tue, 4 Aug 2020 00:09:01 +0200 with message-id <[🔎] 20200804000901.ada4d3e7ac8e2e0050ab3eb3@mailbox.org> and subject line Mass-closing old installation-report bugs has caused the Debian Bug report #742947, regarding Package: installation-reports to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 742947: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742947 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Package: installation-reports
- From: frankpitt <frankpitt@clear.net.nz>
- Date: Sat, 29 Mar 2014 21:56:46 +1300
- Message-id: <53368ace.18e.53a4.13784@clear.net.nz>
- Reply-to: frankpitt@clear.net.nz
Package: installation-reports Boot method: I used the Jessie alpha installer .iso on a USB pen-drive Image version: Constructed from: http://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/jessie_di_alpha_1/amd64/jigdo-cd/firmware-jessie-DI-a1-amd64-netinst.jigdo Date: .jigdo file dated (2014) Mar 19 01:40 Machine: HP Elitebook 850 Processor: Intel i5-4300U 1.90GHz Memory: 3956164 KB Partitions: df: Filesystem 1K-blocks Used Available Use% Mounted on df: none 395620 156 395464 0% /run df: devtmpfs 1964840 0 1964840 0% /dev df: /dev/sdc1 243712 243712 0 100% /cdrom (Note df does not find the 500 GB AHCI SATA disk which has one partition and a bunch of free space) Output of lspci -knn (or lspci -nn): (see attached syslog) lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: Kernel driver in use: snd_hda_intel lspci -knn: 00:14.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB xHCI HC [8086:9c31] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: Kernel driver in use: xhci_hcd lspci -knn: 00:16.0 Communication controller [0780]: Intel Corporation Lynx Point-LP HECI #0 [8086:9c3a] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: 00:16.3 Serial controller [0700]: Intel Corporation Lynx Point-LP HECI KT [8086:9c3d] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: Kernel driver in use: serial lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I218-LM [8086:155a] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: Kernel driver in use: e1000e lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation Lynx Point-LP HD Audio Controller [8086:9c20] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: Kernel driver in use: snd_hda_intel lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 1 [8086:9c10] (rev e4) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.3 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 4 [8086:9c16] (rev e4) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.5 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 6 [8086:9c1a] (rev e4) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB EHCI #1 [8086:9c26] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: Kernel driver in use: ehci-pci lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point-LP LPC Controller [8086:9c43] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: 00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: Kernel driver in use: ahci lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point-LP SMBus Controller [8086:9c22] (rev 04) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] lspci -knn: 02:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 73) lspci -knn: Subsystem: Intel Corporation Device [8086:4070] lspci -knn: 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01) lspci -knn: Subsystem: Hewlett-Packard Company Device [103c:198f] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [E] Install base system: [ ] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: I have included the log records from the installation as attachments along with my recorded notes that contain notes about the hardware and directions for producing the usb pen drive with the bootable installation iso The "Partition hard drive" module only came up with USB pen drive that was used to hold the installation .iso I had tried the installation once before using one of the testing weekly builds with the same outcome. syslog: (attached) - shows a 32GB device on sdb and a 500 Gb device on sda. I think that the 32GB device is a partition left over from the Windows 7 install. The 500 Gb device is the rest of the hard disk - installer logs DEBUG errors when it cannot locate libc6-udeb and libgcc1 - check-missing firmware messages (#725714 firmware insallation bug) - anna[3018] reports missing fat and scsi modules - there are a bunch of errors when disk-detect and part-man run I am assuming that the system needs some firmware or kernel modules that either are not in the iso or are not being installed correctly. I am at a loss as to what to do here, or where to look to sort out the problems. The hardware is farily new, but it is not esoteric. Any help would be appreciated Bernie FrankpittAttachment: hardware-summary
Description: Binary dataAttachment: partman
Description: Binary dataAttachment: syslog
Description: Binary data[ 4.035] X.Org X Server 1.15.0 Release Date: 2013-12-27 [ 4.035] X Protocol Version 11, Revision 0 [ 4.035] Build Operating System: Linux 3.12-1-amd64 x86_64 Debian [ 4.035] Current Operating System: Linux (none) 3.13-1-amd64 #1 SMP Debian 3.13.5-1 (2014-03-04) x86_64 [ 4.035] Kernel command line: vga=788 initrd=/install.amd/gtk/initrd.gz -- quiet BOOT_IMAGE=/install.amd/vmlinuz [ 4.035] Build Date: 06 February 2014 03:20:45PM [ 4.035] xorg-server 2:1.15.0-2 (http://www.debian.org/support) [ 4.035] Current version of pixman: 0.32.4 [ 4.036] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4.036] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4.036] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 29 17:42:15 2014 [ 4.036] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 4.037] (==) No Layout section. Using the first Screen section. [ 4.037] (==) No screen section available. Using defaults. [ 4.037] (**) |-->Screen "Default Screen Section" (0) [ 4.037] (**) | |-->Monitor "<default monitor>" [ 4.037] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4.037] (==) Automatically adding devices [ 4.037] (==) Automatically enabling devices [ 4.037] (==) Automatically adding GPU devices [ 4.037] (==) FontPath set to: built-ins [ 4.037] (==) ModulePath set to "/usr/lib/xorg/modules" [ 4.037] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4.037] (II) Loader magic: 0x7f1cbce24a80 [ 4.037] (II) Module ABI versions: [ 4.037] X.Org ANSI C Emulation: 0.4 [ 4.037] X.Org Video Driver: 15.0 [ 4.037] X.Org XInput driver : 20.0 [ 4.037] X.Org Server Extension : 8.0 [ 4.037] (--) PCI:*(0:0:2:0) 8086:0a16:103c:198f rev 11, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64 [ 4.037] Initializing built-in extension Generic Event Extension [ 4.038] Initializing built-in extension SHAPE [ 4.038] Initializing built-in extension MIT-SHM [ 4.038] Initializing built-in extension XInputExtension [ 4.038] Initializing built-in extension XTEST [ 4.038] Initializing built-in extension BIG-REQUESTS [ 4.038] Initializing built-in extension SYNC [ 4.039] Initializing built-in extension XKEYBOARD [ 4.039] Initializing built-in extension XC-MISC [ 4.039] Initializing built-in extension XFIXES [ 4.039] Initializing built-in extension RENDER [ 4.039] Initializing built-in extension RANDR [ 4.039] Initializing built-in extension DAMAGE [ 4.040] Initializing built-in extension DOUBLE-BUFFER [ 4.040] Initializing built-in extension DPMS [ 4.040] Initializing built-in extension Present [ 4.040] Initializing built-in extension DRI3 [ 4.040] Initializing built-in extension X-Resource [ 4.041] Initializing built-in extension XFree86-DGA [ 4.041] (==) Matched intel as autoconfigured driver 0 [ 4.041] (==) Matched modesetting as autoconfigured driver 1 [ 4.041] (==) Matched fbdev as autoconfigured driver 2 [ 4.041] (==) Matched vesa as autoconfigured driver 3 [ 4.041] (==) Assigned the driver to the xf86ConfigLayout [ 4.041] (II) LoadModule: "intel" [ 4.041] (WW) Warning, couldn't open module intel [ 4.041] (II) UnloadModule: "intel" [ 4.041] (II) Unloading intel [ 4.041] (EE) Failed to load module "intel" (module does not exist, 0) [ 4.041] (II) LoadModule: "modesetting" [ 4.041] (WW) Warning, couldn't open module modesetting [ 4.041] (II) UnloadModule: "modesetting" [ 4.041] (II) Unloading modesetting [ 4.041] (EE) Failed to load module "modesetting" (module does not exist, 0) [ 4.041] (II) LoadModule: "fbdev" [ 4.041] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.041] (II) Module fbdev: vendor="X.Org Foundation" [ 4.041] compiled for 1.15.0, module version = 0.4.4 [ 4.041] Module class: X.Org Video Driver [ 4.041] ABI class: X.Org Video Driver, version 15.0 [ 4.041] (II) LoadModule: "vesa" [ 4.041] (WW) Warning, couldn't open module vesa [ 4.041] (II) UnloadModule: "vesa" [ 4.041] (II) Unloading vesa [ 4.041] (EE) Failed to load module "vesa" (module does not exist, 0) [ 4.041] (II) FBDEV: driver for framebuffer: fbdev [ 4.041] (--) using VT number 5 [ 4.041] (II) Loading sub module "fbdevhw" [ 4.041] (II) LoadModule: "fbdevhw" [ 4.042] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 4.042] (II) Module fbdevhw: vendor="X.Org Foundation" [ 4.042] compiled for 1.15.0, module version = 0.0.2 [ 4.042] ABI class: X.Org Video Driver, version 15.0 [ 4.042] (**) FBDEV(0): claimed PCI slot 0@0:2:0 [ 4.042] (II) FBDEV(0): using default device [ 4.042] (II) FBDEV(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 16/16 [ 4.042] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16 [ 4.042] (==) FBDEV(0): RGB weight 565 [ 4.042] (==) FBDEV(0): Default visual is TrueColor [ 4.042] (II) FBDEV(0): hardware: simple (video memory: 940kB) [ 4.042] (II) FBDEV(0): checking modes against framebuffer device... [ 4.042] (II) FBDEV(0): checking modes against monitor... [ 4.042] (--) FBDEV(0): Virtual size is 800x600 (pitch 800) [ 4.042] (**) FBDEV(0): Built-in mode "current" [ 4.042] (==) FBDEV(0): DPI set to (96, 96) [ 4.042] (II) Loading sub module "fb" [ 4.042] (II) LoadModule: "fb" [ 4.042] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.042] (II) Module fb: vendor="X.Org Foundation" [ 4.042] compiled for 1.15.0, module version = 1.0.0 [ 4.042] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.042] (**) FBDEV(0): using shadow framebuffer [ 4.042] (II) Loading sub module "shadow" [ 4.042] (II) LoadModule: "shadow" [ 4.042] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 4.042] (II) Module shadow: vendor="X.Org Foundation" [ 4.042] compiled for 1.15.0, module version = 1.1.0 [ 4.042] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.042] (EE) FBDEV(0): FBIOBLANK: Invalid argument [ 4.042] (==) FBDEV(0): Backing store disabled [ 4.042] (WW) FBDEV(0): The fbdev driver didn't call xf86SetGamma() to initialise the gamma values. [ 4.042] (WW) FBDEV(0): PLEASE FIX THE `fbdev' DRIVER! [ 4.042] (==) FBDEV(0): DPMS enabled [ 4.042] (==) RandR enabled [ 4.054] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event1) [ 4.054] (II) No input driver specified, ignoring this device. [ 4.054] (II) This device may have been added with another device file. [ 4.054] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event3) [ 4.054] (II) No input driver specified, ignoring this device. [ 4.054] (II) This device may have been added with another device file. [ 4.054] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event2) [ 4.054] (II) No input driver specified, ignoring this device. [ 4.054] (II) This device may have been added with another device file. [ 4.055] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5) [ 4.055] (II) No input driver specified, ignoring this device. [ 4.055] (II) This device may have been added with another device file. [ 4.055] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4) [ 4.055] (II) No input driver specified, ignoring this device. [ 4.055] (II) This device may have been added with another device file. [ 4.055] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 4.055] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 4.055] (II) LoadModule: "evdev" [ 4.055] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 4.055] (II) Module evdev: vendor="X.Org Foundation" [ 4.055] compiled for 1.15.0, module version = 2.8.2 [ 4.055] Module class: X.Org XInput Driver [ 4.055] ABI class: X.Org XInput driver, version 20.0 [ 4.055] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 4.055] (**) AT Translated Set 2 keyboard: always reports core events [ 4.055] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 4.055] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 4.055] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 4.055] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 4.055] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 4.055] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 4.055] (**) Option "xkb_rules" "evdev" [ 4.055] (**) Option "xkb_model" "pc104" [ 4.055] (**) Option "xkb_layout" "us" [ 4.066] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6) [ 4.066] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 4.066] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 4.066] (**) PS/2 Generic Mouse: always reports core events [ 4.066] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6" [ 4.066] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1 [ 4.066] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons [ 4.066] (--) evdev: PS/2 Generic Mouse: Found relative axes [ 4.066] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes [ 4.066] (II) evdev: PS/2 Generic Mouse: Configuring as mouse [ 4.066] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 4.066] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4.066] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input7/event6" [ 4.066] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 7) [ 4.066] (II) evdev: PS/2 Generic Mouse: initialized for relative axes. [ 4.066] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 4.066] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 4.066] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 4.066] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 4.066] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) [ 4.066] (II) No input driver specified, ignoring this device. [ 4.066] (II) This device may have been added with another device file. [ 4.067] (EE) FBDEV(0): FBIOBLANK: Invalid argument [ 4.426] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 4.426] (II) No input driver specified, ignoring this device. [ 4.426] (II) This device may have been added with another device file. [ 4.426] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 4.426] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 4.426] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad' [ 4.426] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 4.426] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event7" [ 4.426] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device [ 4.426] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 4.426] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons [ 4.426] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes [ 4.426] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes [ 4.426] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes [ 4.426] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad. [ 4.426] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad [ 4.426] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5 [ 4.426] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4.426] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event7" [ 4.426] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 8) [ 4.426] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes. [ 4.426] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 4.426] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 [ 4.426] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 4.426] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 47.891] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event1) [ 47.891] (II) No input driver specified, ignoring this device. [ 47.891] (II) This device may have been added with another device file. [ 47.892] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event2) [ 47.892] (II) No input driver specified, ignoring this device. [ 47.892] (II) This device may have been added with another device file. [ 47.909] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event3) [ 47.909] (II) No input driver specified, ignoring this device. [ 47.909] (II) This device may have been added with another device file. [ 47.909] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5) [ 47.909] (II) No input driver specified, ignoring this device. [ 47.909] (II) This device may have been added with another device file. [ 47.910] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4) [ 47.910] (II) No input driver specified, ignoring this device. [ 47.910] (II) This device may have been added with another device file. [ 47.915] (II) config/udev: removing device PS/2 Generic Mouse [ 47.944] (II) evdev: PS/2 Generic Mouse: Close [ 47.944] (II) UnloadModule: "evdev" [ 47.944] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6) [ 47.944] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 47.944] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 47.944] (**) PS/2 Generic Mouse: always reports core events [ 47.944] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6" [ 47.944] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1 [ 47.944] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons [ 47.944] (--) evdev: PS/2 Generic Mouse: Found relative axes [ 47.944] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes [ 47.944] (II) evdev: PS/2 Generic Mouse: Configuring as mouse [ 47.944] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 47.944] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 47.944] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input7/event6" [ 47.944] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 7) [ 47.944] (II) evdev: PS/2 Generic Mouse: initialized for relative axes. [ 47.944] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 47.944] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 47.944] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 47.944] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 47.944] (II) config/udev: removing device AT Translated Set 2 keyboard [ 47.960] (II) evdev: AT Translated Set 2 keyboard: Close [ 47.960] (II) UnloadModule: "evdev" [ 47.960] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 47.960] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 47.960] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 47.960] (**) AT Translated Set 2 keyboard: always reports core events [ 47.960] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 47.960] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 47.960] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 47.960] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 47.960] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 47.960] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 47.960] (**) Option "xkb_rules" "evdev" [ 47.960] (**) Option "xkb_model" "pc105" [ 47.960] (**) Option "xkb_layout" "us" [ 47.972] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) [ 47.972] (II) No input driver specified, ignoring this device. [ 47.972] (II) This device may have been added with another device file. [ 47.972] (II) config/udev: removing device SynPS/2 Synaptics TouchPad [ 48.044] (II) evdev: SynPS/2 Synaptics TouchPad: Close [ 48.044] (II) UnloadModule: "evdev" [ 48.044] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 48.044] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 48.044] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad' [ 48.044] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 48.044] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event7" [ 48.044] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device [ 48.044] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 48.044] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons [ 48.044] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes [ 48.044] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes [ 48.044] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes [ 48.044] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad. [ 48.044] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad [ 48.044] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5 [ 48.044] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 48.044] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event7" [ 48.044] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 8) [ 48.044] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes. [ 48.044] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 48.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 [ 48.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 48.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 48.044] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 48.044] (II) No input driver specified, ignoring this device. [ 48.044] (II) This device may have been added with another device file. [ 71.844] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5) [ 71.844] (II) No input driver specified, ignoring this device. [ 71.844] (II) This device may have been added with another device file. [ 71.845] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event3) [ 71.845] (II) No input driver specified, ignoring this device. [ 71.845] (II) This device may have been added with another device file. [ 71.847] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4) [ 71.847] (II) No input driver specified, ignoring this device. [ 71.847] (II) This device may have been added with another device file. [ 71.848] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event1) [ 71.848] (II) No input driver specified, ignoring this device. [ 71.848] (II) This device may have been added with another device file. [ 71.852] (II) config/udev: removing device PS/2 Generic Mouse [ 71.868] (II) evdev: PS/2 Generic Mouse: Close [ 71.868] (II) UnloadModule: "evdev" [ 71.868] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6) [ 71.868] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 71.868] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 71.868] (**) PS/2 Generic Mouse: always reports core events [ 71.868] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6" [ 71.868] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1 [ 71.868] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons [ 71.868] (--) evdev: PS/2 Generic Mouse: Found relative axes [ 71.868] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes [ 71.868] (II) evdev: PS/2 Generic Mouse: Configuring as mouse [ 71.868] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 71.868] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 71.868] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input7/event6" [ 71.868] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 7) [ 71.868] (II) evdev: PS/2 Generic Mouse: initialized for relative axes. [ 71.868] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 71.868] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 71.868] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 71.868] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 71.868] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) [ 71.868] (II) No input driver specified, ignoring this device. [ 71.868] (II) This device may have been added with another device file. [ 71.868] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event2) [ 71.868] (II) No input driver specified, ignoring this device. [ 71.868] (II) This device may have been added with another device file. [ 71.868] (II) config/udev: removing device AT Translated Set 2 keyboard [ 71.930] (II) evdev: AT Translated Set 2 keyboard: Close [ 71.930] (II) UnloadModule: "evdev" [ 71.930] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 71.930] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 71.930] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 71.930] (**) AT Translated Set 2 keyboard: always reports core events [ 71.930] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 71.930] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 71.930] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 71.930] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 71.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 71.930] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 71.930] (**) Option "xkb_rules" "evdev" [ 71.930] (**) Option "xkb_model" "pc105" [ 71.930] (**) Option "xkb_layout" "us" [ 71.930] (II) config/udev: removing device SynPS/2 Synaptics TouchPad [ 72.006] (II) evdev: SynPS/2 Synaptics TouchPad: Close [ 72.006] (II) UnloadModule: "evdev" [ 72.006] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 72.006] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 72.006] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad' [ 72.006] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 72.006] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event7" [ 72.006] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device [ 72.006] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 72.006] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons [ 72.006] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes [ 72.006] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes [ 72.006] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes [ 72.006] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad. [ 72.006] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad [ 72.006] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5 [ 72.006] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 72.006] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event7" [ 72.006] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 8) [ 72.006] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes. [ 72.006] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 72.006] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 [ 72.006] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 72.006] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 72.006] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 72.006] (II) No input driver specified, ignoring this device. [ 72.006] (II) This device may have been added with another device file. [ 301.973] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event1) [ 301.973] (II) No input driver specified, ignoring this device. [ 301.973] (II) This device may have been added with another device file. [ 301.973] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event3) [ 301.973] (II) No input driver specified, ignoring this device. [ 301.973] (II) This device may have been added with another device file. [ 301.974] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event2) [ 301.974] (II) No input driver specified, ignoring this device. [ 301.974] (II) This device may have been added with another device file. [ 301.974] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5) [ 301.974] (II) No input driver specified, ignoring this device. [ 301.974] (II) This device may have been added with another device file. [ 301.974] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4) [ 301.974] (II) No input driver specified, ignoring this device. [ 301.974] (II) This device may have been added with another device file. [ 301.981] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 301.981] (II) No input driver specified, ignoring this device. [ 301.981] (II) This device may have been added with another device file. [ 301.981] (II) config/udev: removing device SynPS/2 Synaptics TouchPad [ 302.028] (II) evdev: SynPS/2 Synaptics TouchPad: Close [ 302.028] (II) UnloadModule: "evdev" [ 302.028] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 302.028] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 302.028] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad' [ 302.028] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 302.028] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event7" [ 302.028] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device [ 302.028] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 302.028] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons [ 302.028] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes [ 302.028] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes [ 302.028] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes [ 302.028] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad. [ 302.028] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad [ 302.028] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5 [ 302.028] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 302.028] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event7" [ 302.028] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 8) [ 302.028] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes. [ 302.028] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 302.028] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 [ 302.028] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 302.028] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 302.028] (II) config/udev: removing device AT Translated Set 2 keyboard [ 302.124] (II) evdev: AT Translated Set 2 keyboard: Close [ 302.124] (II) UnloadModule: "evdev" [ 302.124] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 302.124] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 302.124] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 302.124] (**) AT Translated Set 2 keyboard: always reports core events [ 302.124] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 302.124] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 302.124] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 302.124] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 302.124] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 302.124] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 302.124] (**) Option "xkb_rules" "evdev" [ 302.124] (**) Option "xkb_model" "pc105" [ 302.124] (**) Option "xkb_layout" "us" [ 302.124] (II) config/udev: removing device PS/2 Generic Mouse [ 302.220] (II) evdev: PS/2 Generic Mouse: Close [ 302.220] (II) UnloadModule: "evdev" [ 302.220] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6) [ 302.220] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 302.220] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 302.220] (**) PS/2 Generic Mouse: always reports core events [ 302.220] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6" [ 302.220] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1 [ 302.220] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons [ 302.220] (--) evdev: PS/2 Generic Mouse: Found relative axes [ 302.220] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes [ 302.220] (II) evdev: PS/2 Generic Mouse: Configuring as mouse [ 302.220] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 302.220] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 302.220] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input7/event6" [ 302.220] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 7) [ 302.220] (II) evdev: PS/2 Generic Mouse: initialized for relative axes. [ 302.220] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 302.220] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 302.220] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 302.220] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 302.220] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) [ 302.220] (II) No input driver specified, ignoring this device. [ 302.220] (II) This device may have been added with another device file. [ 625.911] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event3) [ 625.911] (II) No input driver specified, ignoring this device. [ 625.911] (II) This device may have been added with another device file. [ 625.911] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event2) [ 625.911] (II) No input driver specified, ignoring this device. [ 625.911] (II) This device may have been added with another device file. [ 625.911] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event1) [ 625.911] (II) No input driver specified, ignoring this device. [ 625.911] (II) This device may have been added with another device file. [ 625.912] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4) [ 625.912] (II) No input driver specified, ignoring this device. [ 625.912] (II) This device may have been added with another device file. [ 625.914] (II) config/udev: removing device PS/2 Generic Mouse [ 625.936] (II) evdev: PS/2 Generic Mouse: Close [ 625.936] (II) UnloadModule: "evdev" [ 625.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6) [ 625.937] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 625.937] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 625.937] (**) PS/2 Generic Mouse: always reports core events [ 625.937] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6" [ 625.937] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1 [ 625.937] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons [ 625.937] (--) evdev: PS/2 Generic Mouse: Found relative axes [ 625.937] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes [ 625.937] (II) evdev: PS/2 Generic Mouse: Configuring as mouse [ 625.937] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 625.937] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 625.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input7/event6" [ 625.937] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 7) [ 625.937] (II) evdev: PS/2 Generic Mouse: initialized for relative axes. [ 625.937] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 625.937] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 625.937] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 625.937] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 625.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) [ 625.937] (II) No input driver specified, ignoring this device. [ 625.937] (II) This device may have been added with another device file. [ 625.938] (II) config/udev: removing device SynPS/2 Synaptics TouchPad [ 625.955] (II) evdev: SynPS/2 Synaptics TouchPad: Close [ 625.955] (II) UnloadModule: "evdev" [ 625.955] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 625.955] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 625.955] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad' [ 625.955] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 625.955] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event7" [ 625.955] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device [ 625.955] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 625.955] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons [ 625.955] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes [ 625.955] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes [ 625.955] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes [ 625.955] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad. [ 625.955] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad [ 625.955] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5 [ 625.955] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 625.955] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event7" [ 625.955] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 8) [ 625.955] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes. [ 625.955] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 625.955] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 [ 625.955] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 625.955] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 625.955] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 625.955] (II) No input driver specified, ignoring this device. [ 625.955] (II) This device may have been added with another device file. [ 625.956] (II) config/udev: removing device AT Translated Set 2 keyboard [ 625.980] (II) evdev: AT Translated Set 2 keyboard: Close [ 625.980] (II) UnloadModule: "evdev" [ 625.980] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 625.980] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 625.980] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 625.980] (**) AT Translated Set 2 keyboard: always reports core events [ 625.980] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 625.980] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 625.980] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 625.980] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 625.980] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 625.980] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 625.980] (**) Option "xkb_rules" "evdev" [ 625.980] (**) Option "xkb_model" "pc105" [ 625.980] (**) Option "xkb_layout" "us" [ 625.980] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5) [ 625.980] (II) No input driver specified, ignoring this device. [ 625.980] (II) This device may have been added with another device file. [ 1815.991] (EE) FBDEV(0): FBIOBLANK: Invalid argument [ 1815.991] (EE) FBDEV(0): FBIOBLANK: Invalid argument [ 1815.991] (EE) FBDEV(0): FBIOBLANK: Invalid argument------------------------------------------------------ Notes for installation of Jessie (Testing) onto HP 850 ----------------------------------------------------- HP EliteBook 850 notes ------------------------------------- Processor: Intel 4th Generation i5-4300 U VPRO at 1.9 GHz Clock speed Intel HD 4400 Grahics Processor Intel DH82QM87 Platform Controller Hub ---------------------------------------- Devices and drivers identified in Windows - 7 system information Mobile Express Chipset SATA Raid Controller Disk HTS 725050A7E63 SCSI Drive INTEL WiUSB VoIP Hub Synaptics SMBus Touchpad Generic PNP monitor Intel Dual Band Wireless-N 7260 AN Bluetooth rfcomm Protocol TDI Intel Ethernet Connection I218-LM IDT high definition Audio Codec ACPI Fixed Feature ACPI Lid ACPI Sleep Button ACPI Thermal Zone Composite Bus Enumerator DMA Controller Extended IO Bus High Definition Audio Controller High Precision Event Timer HP Mobile Data Protection Sensor Intel 8 Series LPC Controller Intel 8202 Firmware Hub device Mangement Engine interface Smart Connect technology IWD Bus Enumerator PCI Bus PCI Std Host CPU Bridge PnP Software Device Enumerator Programmable Interrupt Controller Remote DesktopDevice Redirect Controller Synaptics SMBus Driver System CMOS real time clock System timer VM Bus enumerator VM Bus Root Bus Enumerator Generic USB Hub Intel 8 series USB Enhanced Host Controler#1-9C26 Intel USB 3.0 extensible host controller Intel USB Composite Device Intel USB 3.0 Root Hub Real Tek PCIE Card Reader w/- HP QLIB HP HD WEbcam 101/102 PS/2 Keyboard intel Wireless Bluetooth 4.0 Adapter Biometric Validity Sensor --------------------------------------------------- BIOS Settings (Only options that are selected only) 32 MB video memory size Data Execution Prevention on Max SATA Speed 6.0 Gbps SATA Device Mode AHCI USB Charging Port: disble in sleep states below 10% Wake On USB Intel Smart Connect Tecnology Smart Card Reader Power Setting on if card is present Port options: Flash media reader, USB Port, Smart Card all enabled -------------------------------------------- Kernel configuration and drivers that we probably need include: USB3.0 config item: CONFIG_USB_XHCI_HCD V 3.7-3.13 prompt: XHCI HCD (USB 3.0) support modules: xhci_hcd, xhci Lynx point PlatformController Hub (Intel DH82QM87) config item: CONFIG_SATA_AHCI v 3.0 - 3.13 prompt: AHCI SATA support modules: ahci, libahci I218LM Ethernet chip config item: CONFIG_E1000 cd prompt: modules:e1000 ---------------------------------------------------------------- Procedure for making a boot USB drive --------------------------------------------------------------- 1) Find an empty USB Drive 2) Install jidgo-file using # app-get install jidgo-file 3) get an iso image using jigdo (The Installation howto says that you can boot from any CD ISO image that will fit on your usb stick) To get the Jessie alpha (29/3/14) cd with firmware you need the unofficial debian installer image: # jigdo-lite http://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/jessie_di_alpha_1/amd64/jigdo-cd/firmware-jessie-DI-a1-amd64-netinst.jigdo Jigdo prompts you for the location of a local previous version of the iso that you may have some ot the files you need. If you don't have one, press enter. Jigdo will prompt you for a URI for your local debian mirror, which will have an address of the form http://ftp.XY.debian.org where XY is a code for you local debian mirror. See https://www.debian.org/mirror/list for New Zealand try http://ftp.nz.debian.org It will take a while to download the iso, and the programmay cycle through several mirrors to find all the file that it needs. When the download is successfully completed you get the message Finished! The fact that you got this far is a strong indication that `debian-testing-amd64-netinst.iso' was generated correctly. I will perform an additional, final check, which you can interrupt safely with Ctrl-C if you do not want to wait. OK: Checksums match, image is good! If the download is unsuccessful, you might be hitting your mirror in the middle of an update, try again later. If you still have no luck, try a different mirror. 4) Write the iso to a USB drive Delete any previous partition table: # dd if=/dev/zero of=/dev/sdb bs=512 count=1 Create the new ones: # cfdisk /dev/sdb Use the arrow keys to navigate the terminal interface > [New] <Enter> make new partition > select primary for partition type <p> > Select position at beginning of disk > [Bootable] <b> (toggles boot flag) > [Type] <ENTER> to describe file system type > select code to FAT16 > [Write] write the new table and quit Install a mbr with # install-mbr /dev/sdb Install a FAT16 filesystem with # mkdosfs /dev/sdb1 Copy the installation iso to the bootable partition on the USB dive with the command # cp debian-testing-amd64-netinst.iso /dev/sdb1 ----------------------------------------------------------------- Booting the installer in the HP 850 ----------------------------------------------------------------- Plug in the USB drive Check that USB CDROM is top priority for boot, disable the other boot options in the BIOS Power down the machine and restart Select Graphical installer and work through the menu
--- End Message ---
--- Begin Message ---
- To: debian-boot <debian-boot@lists.debian.org>
- Cc: 708167-done@bugs.debian.org, 710921-done@bugs.debian.org, 712842-done@bugs.debian.org, 713941-done@bugs.debian.org, 718451-done@bugs.debian.org, 721841-done@bugs.debian.org, 722728-done@bugs.debian.org, 722986-done@bugs.debian.org, 724601-done@bugs.debian.org, 724906-done@bugs.debian.org, 725750-done@bugs.debian.org, 725915-done@bugs.debian.org, 726077-done@bugs.debian.org, 728126-done@bugs.debian.org, 728397-done@bugs.debian.org, 730414-done@bugs.debian.org, 731114-done@bugs.debian.org, 731776-done@bugs.debian.org, 732625-done@bugs.debian.org, 734171-done@bugs.debian.org, 734641-done@bugs.debian.org, 736234-done@bugs.debian.org, 737683-done@bugs.debian.org, 739912-done@bugs.debian.org, 740410-done@bugs.debian.org, 740537-done@bugs.debian.org, 740770-done@bugs.debian.org, 741027-done@bugs.debian.org, 741155-done@bugs.debian.org, 742947-done@bugs.debian.org, 743060-done@bugs.debian.org, 743142-done@bugs.debian.org, 743435-done@bugs.debian.org, 746245-done@bugs.debian.org, 746658-done@bugs.debian.org, 746926-done@bugs.debian.org, 747209-done@bugs.debian.org, 748127-done@bugs.debian.org, 748385-done@bugs.debian.org, 748641-done@bugs.debian.org, 749220-done@bugs.debian.org, 751393-done@bugs.debian.org, 752850-done@bugs.debian.org, 757165-done@bugs.debian.org, 757244-done@bugs.debian.org, 758260-done@bugs.debian.org
- Subject: Mass-closing old installation-report bugs
- From: Holger Wansing <hwansing@mailbox.org>
- Date: Tue, 4 Aug 2020 00:09:01 +0200
- Message-id: <[🔎] 20200804000901.ada4d3e7ac8e2e0050ab3eb3@mailbox.org>
I'm closing the reports below. That's installation-reports for Debian 7 with - undefined errors - problems which are likely to have been fixed in the meantime - successful installation Because of the age, there is no chance to analyse them further and therefore they are no longer relevant or of any use for current releases: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=708167 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=710921 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=712842 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=713941 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=718451 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=721841 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=722728 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=722986 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=724601 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=724906 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=725750 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=725915 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=726077 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=728126 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=728397 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=730414 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=731114 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=731776 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732625 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=734171 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=734641 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=736234 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=737683 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739912 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740410 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740537 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740770 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=741027 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=741155 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742947 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=743060 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=743142 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=743435 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=746245 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=746658 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=746926 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747209 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=748127 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=748385 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=748641 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=749220 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751393 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752850 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=757165 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=757244 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=758260 Holger -- Holger Wansing <hwansing@mailbox.org> PGP-Fingerprint: 496A C6E8 1442 4B34 8508 3529 59F1 87CA 156E B076
--- End Message ---