--- Begin Message ---
Package: installation-reports
Boot method: <How did you boot the installer? CD? floppy? network?> DVD
Image version: <Full URL to image you downloaded is best>debian-9.0.0-amd64-DVD-1.iso
<https://cdimage.debian.org/debian-cd/current/amd64/iso-dvd/debian-9.0.0-amd64-DVD-1.iso> 2017-06-17 16:21 3.5G
Date: <Date and time of the install> 2017-06-30
Machine: <Description of machine (eg, IBM Thinkpad R32)> ASUS Z87-WS motherboard
Processor: Intel Core i7-47-4790T, Socket 1150
Memory: 24 GB
Partitions: <df -Tl will do; the raw partition table is preferred>
Output of lspci -knn (or lspci -nn): output of lspci:
XYZ@debian:~$ lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d5)
00:1c.7 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Z87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ba)
02:08.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ba)
02:10.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ba)
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Cedar GL [FirePro 2460]
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI
Audio [Radeon HD 5400/6300/7300 Series]
05:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 10)
06:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
07:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
08:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
09:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01)
0a:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
XYZ@debian:~$
output of dmesg:
root@debian:/home/XYZ# dmesg
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=7794e348-9a5d-46c5-b1e4-eee1af3941bd ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca5bafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca5bb000-0x00000000ca5c1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ca5c2000-0x00000000caa0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caa10000-0x00000000caea6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caea7000-0x00000000dd6adfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd6ae000-0x00000000dd8b6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd8b7000-0x00000000dd8cffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd8d0000-0x00000000dde12fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dde13000-0x00000000deffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000061effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-WS, BIOS 1803 04/16/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x61f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7E00000000 write-back
[ 0.000000] 2 base 0600000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 0610000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 0618000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 061C000000 mask 7FFE000000 write-back
[ 0.000000] 6 base 061E000000 mask 7FFF000000 write-back
[ 0.000000] 7 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [ffff9a49400fd870]
[ 0.000000] Base memory trampoline at [ffff9a4940096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x4b7f2e000, 0x4b7f2efff] PGTABLE
[ 0.000000] BRK [0x4b7f2f000, 0x4b7f2ffff] PGTABLE
[ 0.000000] BRK [0x4b7f30000, 0x4b7f30fff] PGTABLE
[ 0.000000] BRK [0x4b7f31000, 0x4b7f31fff] PGTABLE
[ 0.000000] BRK [0x4b7f32000, 0x4b7f32fff] PGTABLE
[ 0.000000] BRK [0x4b7f33000, 0x4b7f33fff] PGTABLE
[ 0.000000] BRK [0x4b7f34000, 0x4b7f34fff] PGTABLE
[ 0.000000] BRK [0x4b7f35000, 0x4b7f35fff] PGTABLE
[ 0.000000] BRK [0x4b7f36000, 0x4b7f36fff] PGTABLE
[ 0.000000] BRK [0x4b7f37000, 0x4b7f37fff] PGTABLE
[ 0.000000] BRK [0x4b7f38000, 0x4b7f38fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35d13000-0x36e80fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD8BC080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD8CA8B8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DD8BC198 00E71A (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DDE11080 000040
[ 0.000000] ACPI: APIC 0x00000000DD8CA9C8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD8CAA60 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000DD8CAAA8 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD8CAB08 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD8CB048 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000DD8CBB20 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DD8CBB60 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD8CBB98 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD8CBF08 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DD8CF448 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000061effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x61effb000-0x61effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000061effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ca5bafff]
[ 0.000000] node 0: [mem 0x00000000ca5c2000-0x00000000caa0ffff]
[ 0.000000] node 0: [mem 0x00000000caea7000-0x00000000dd6adfff]
[ 0.000000] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000061effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000061effffff]
[ 0.000000] On node 0 totalpages: 6275500
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14089 pages used for memmap
[ 0.000000] DMA32 zone: 901649 pages, LIFO batch:31
[ 0.000000] Normal zone: 83904 pages used for memmap
[ 0.000000] Normal zone: 5369856 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca5bb000-0xca5c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaa10000-0xcaea6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd6ae000-0xdd8b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd8b7000-0xdd8cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd8d0000-0xdde12fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdde13000-0xdeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9a4f5ec00000 s103512 r8192 d31656 u262144
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 6177422
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=7794e348-9a5d-46c5-b1e4-eee1af3941bd ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24608096K/25102000K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 493904K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2698.540 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 5397.08 BogoMIPS (lpj=10794160)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000036] ACPI: Core revision 20160831
[ 0.009444] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.009489] Security Framework initialized
[ 0.009490] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009494] AppArmor: AppArmor disabled by boot time parameter
[ 0.010800] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.015949] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.018245] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.018267] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.018616] CPU: Physical Processor ID: 0
[ 0.018616] CPU: Processor Core ID: 0
[ 0.018620] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.018620] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.018623] mce: CPU supports 9 MCE banks
[ 0.018631] CPU0: Thermal monitoring enabled (TM1)
[ 0.018645] process: using mwait in idle threads
[ 0.018647] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.018648] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.019518] Freeing SMP alternatives memory: 24K (ffffffff9dc7a000 - ffffffff9dc80000)
[ 0.023200] ftrace: allocating 25178 entries in 99 pages
[ 0.031924] smpboot: Max logical packages: 2
[ 0.031991] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.032390] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072075] TSC deadline timer enabled
[ 0.072077] smpboot: CPU0: Intel(R) Core(TM) i7-4790T CPU @ 2.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.072079] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.072099] ... version: 3
[ 0.072100] ... bit width: 48
[ 0.072100] ... generic registers: 4
[ 0.072101] ... value mask: 0000ffffffffffff
[ 0.072101] ... max period: 00007fffffffffff
[ 0.072101] ... fixed-purpose events: 3
[ 0.072102] ... event mask: 000000070000000f
[ 0.072618] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072697] x86: Booting SMP configuration:
[ 0.072698] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.634251] x86: Booted up 1 node, 8 CPUs
[ 0.634253] smpboot: Total of 8 processors activated (43183.63 BogoMIPS)
[ 0.642574] devtmpfs: initialized
[ 0.642629] x86/mm: Memory block size: 128MB
[ 0.646035] PM: Registering ACPI NVS region [mem 0xca5bb000-0xca5c1fff] (28672 bytes)
[ 0.646037] PM: Registering ACPI NVS region [mem 0xdd8d0000-0xdde12fff] (5517312 bytes)
[ 0.646203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.646215] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.646265] pinctrl core: initialized pinctrl subsystem
[ 0.646357] NET: Registered protocol family 16
[ 0.662011] cpuidle: using governor ladder
[ 0.674014] cpuidle: using governor menu
[ 0.674032] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.674033] ACPI: bus type PCI registered
[ 0.674034] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.674087] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.674089] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.674095] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.674146] PCI: Using configuration type 1 for base access
[ 0.674187] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.698113] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.698114] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.698315] ACPI: Added _OSI(Module Device)
[ 0.698316] ACPI: Added _OSI(Processor Device)
[ 0.698317] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.698317] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.698485] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.702256] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.703095] ACPI: Dynamic OEM Table Load:
[ 0.703100] ACPI: SSDT 0xFFFF9A4F4298AC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.703436] ACPI: Dynamic OEM Table Load:
[ 0.703440] ACPI: SSDT 0xFFFF9A4F429EA000 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.703810] ACPI: Dynamic OEM Table Load:
[ 0.703814] ACPI: SSDT 0xFFFF9A4F42A46600 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.705331] ACPI: Interpreter enabled
[ 0.705357] ACPI: (supports S0 S3 S4 S5)
[ 0.705358] ACPI: Using IOAPIC for interrupt routing
[ 0.705383] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.713173] ACPI: Power Resource [FN00] (off)
[ 0.713240] ACPI: Power Resource [FN01] (off)
[ 0.713303] ACPI: Power Resource [FN02] (off)
[ 0.713370] ACPI: Power Resource [FN03] (off)
[ 0.713433] ACPI: Power Resource [FN04] (off)
[ 0.714165] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.714168] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.714362] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.714476] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.714477] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.714811] PCI host bridge to bus 0000:00
[ 0.714813] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.714814] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.714815] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.714815] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.714816] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.714817] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.714818] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.714819] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.714820] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.714821] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.714826] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.714904] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.714933] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.715008] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.715059] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.715074] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.715128] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.715163] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.715195] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.715210] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
[ 0.715267] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.715335] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.715350] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
[ 0.715426] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.715471] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.715504] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.715517] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.715578] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.715617] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.715646] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.715703] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.715769] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.715800] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.715857] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.715920] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.715950] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.716007] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.716070] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.716101] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.716158] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.716221] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.716251] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.716308] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.716370] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.716399] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[ 0.716456] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.716518] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.716551] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.716566] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[ 0.716642] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.716688] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.716720] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.716870] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.716881] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.716887] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.716892] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.716898] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.716904] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.716910] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
[ 0.716941] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.717000] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.717012] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
[ 0.717029] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.717134] pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
[ 0.717142] pci 0000:01:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff]
[ 0.717192] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.717218] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.726041] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 0.726043] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.726044] pci 0000:00:01.0: bridge window [mem 0xf7700000-0xf78fffff]
[ 0.726047] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.726088] pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
[ 0.726147] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.726199] pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
[ 0.726257] pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
[ 0.726306] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.726309] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.726311] pci 0000:01:00.0: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.726314] pci 0000:01:00.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.726342] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.726382] pci 0000:03:00.0: [1002:68f1] type 00 class 0x030000
[ 0.726397] pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.726407] pci 0000:03:00.0: reg 0x18: [mem 0xf7720000-0xf773ffff 64bit]
[ 0.726414] pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.726427] pci 0000:03:00.0: reg 0x30: [mem 0xf7700000-0xf771ffff pref]
[ 0.726465] pci 0000:03:00.0: supports D1 D2
[ 0.726509] pci 0000:03:00.1: [1002:aa68] type 00 class 0x040300
[ 0.726524] pci 0000:03:00.1: reg 0x10: [mem 0xf7740000-0xf7743fff 64bit]
[ 0.726591] pci 0000:03:00.1: supports D1 D2
[ 0.738050] pci 0000:02:10.0: PCI bridge to [bus 03]
[ 0.738053] pci 0000:02:10.0: bridge window [io 0xe000-0xefff]
[ 0.738055] pci 0000:02:10.0: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.738058] pci 0000:02:10.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.738127] pci 0000:05:00.0: [1b4b:9230] type 00 class 0x010601
[ 0.738141] pci 0000:05:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.738149] pci 0000:05:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.738158] pci 0000:05:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.738167] pci 0000:05:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.738175] pci 0000:05:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.738184] pci 0000:05:00.0: reg 0x24: [mem 0xf7e10000-0xf7e107ff]
[ 0.738193] pci 0000:05:00.0: reg 0x30: [mem 0xf7e00000-0xf7e0ffff pref]
[ 0.738202] pci 0000:05:00.0: Enabling fixed DMA alias to 00.1
[ 0.738242] pci 0000:05:00.0: PME# supported from D3hot
[ 0.738267] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.750057] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.750060] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.750062] pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.750133] pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
[ 0.750156] pci 0000:06:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff]
[ 0.750183] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f]
[ 0.750197] pci 0000:06:00.0: reg 0x1c: [mem 0xf7d80000-0xf7d83fff]
[ 0.750324] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.750370] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.762067] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.762069] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.762071] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.762144] pci 0000:07:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.762176] pci 0000:07:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.762338] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.762382] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.774076] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ 0.774080] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.774143] pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
[ 0.774160] pci 0000:08:00.0: reg 0x10: [io 0xb050-0xb057]
[ 0.774170] pci 0000:08:00.0: reg 0x14: [io 0xb040-0xb043]
[ 0.774180] pci 0000:08:00.0: reg 0x18: [io 0xb030-0xb037]
[ 0.774190] pci 0000:08:00.0: reg 0x1c: [io 0xb020-0xb023]
[ 0.774200] pci 0000:08:00.0: reg 0x20: [io 0xb000-0xb01f]
[ 0.774210] pci 0000:08:00.0: reg 0x24: [mem 0xf7b00000-0xf7b001ff]
[ 0.774294] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.786079] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.786081] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.786083] pci 0000:00:1c.5: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.786147] pci 0000:09:00.0: [1106:3403] type 00 class 0x0c0010
[ 0.786171] pci 0000:09:00.0: reg 0x10: [mem 0xf7a00000-0xf7a007ff 64bit]
[ 0.786182] pci 0000:09:00.0: reg 0x18: [io 0xa000-0xa0ff]
[ 0.786282] pci 0000:09:00.0: supports D2
[ 0.786282] pci 0000:09:00.0: PME# supported from D2 D3hot D3cold
[ 0.786314] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.798087] pci 0000:00:1c.6: PCI bridge to [bus 09]
[ 0.798089] pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
[ 0.798092] pci 0000:00:1c.6: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.798164] pci 0000:0a:00.0: [8086:1533] type 00 class 0x020000
[ 0.798187] pci 0000:0a:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff]
[ 0.798213] pci 0000:0a:00.0: reg 0x18: [io 0x9000-0x901f]
[ 0.798227] pci 0000:0a:00.0: reg 0x1c: [mem 0xf7980000-0xf7983fff]
[ 0.798353] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[ 0.798399] pci 0000:0a:00.0: System wakeup disabled by ACPI
[ 0.810094] pci 0000:00:1c.7: PCI bridge to [bus 0a]
[ 0.810096] pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
[ 0.810099] pci 0000:00:1c.7: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.810806] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.810845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.810883] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.810922] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.810959] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.810996] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.811034] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.811071] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.811343] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.811498] vgaarb: setting as boot device: PCI:0000:03:00.0
[ 0.811499] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.811500] vgaarb: loaded
[ 0.811501] vgaarb: bridge control possible 0000:03:00.0
[ 0.811555] PCI: Using ACPI for IRQ routing
[ 0.812712] PCI: pci_cache_line_size set to 64 bytes
[ 0.812772] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.812773] e820: reserve RAM buffer [mem 0xca5bb000-0xcbffffff]
[ 0.812774] e820: reserve RAM buffer [mem 0xcaa10000-0xcbffffff]
[ 0.812774] e820: reserve RAM buffer [mem 0xdd6ae000-0xdfffffff]
[ 0.812775] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.812776] e820: reserve RAM buffer [mem 0x61f000000-0x61fffffff]
[ 0.812891] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.812894] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.814914] clocksource: Switched to clocksource hpet
[ 0.820221] VFS: Disk quotas dquot_6.6.0
[ 0.820240] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.820304] pnp: PnP ACPI init
[ 0.820371] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.820373] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.820612] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.820613] system 00:01: [io 0xffff] has been reserved
[ 0.820614] system 00:01: [io 0xffff] has been reserved
[ 0.820615] system 00:01: [io 0xffff] has been reserved
[ 0.820616] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.820617] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.820618] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.820619] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.820620] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.820621] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.820622] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.820642] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.820684] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.820685] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.820761] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.820763] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.820808] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.820810] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.820991] pnp 00:06: [dma 0 disabled]
[ 0.821028] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.821311] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.821312] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.821313] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.821314] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.821315] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.821316] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.821318] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.821319] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.821320] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.821321] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.821322] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.821324] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.821325] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.821506] pnp: PnP ACPI: found 8 devices
[ 0.827273] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.827323] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.827331] pci 0000:02:10.0: PCI bridge to [bus 03]
[ 0.827332] pci 0000:02:10.0: bridge window [io 0xe000-0xefff]
[ 0.827335] pci 0000:02:10.0: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.827338] pci 0000:02:10.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.827341] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.827342] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.827345] pci 0000:01:00.0: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.827347] pci 0000:01:00.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.827351] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 0.827352] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.827354] pci 0000:00:01.0: bridge window [mem 0xf7700000-0xf78fffff]
[ 0.827355] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.827358] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.827360] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.827363] pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.827369] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.827370] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.827373] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.827379] pci 0000:00:1c.3: PCI bridge to [bus 07]
[ 0.827382] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.827388] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.827389] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.827393] pci 0000:00:1c.5: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.827398] pci 0000:00:1c.6: PCI bridge to [bus 09]
[ 0.827400] pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
[ 0.827403] pci 0000:00:1c.6: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.827409] pci 0000:00:1c.7: PCI bridge to [bus 0a]
[ 0.827410] pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
[ 0.827413] pci 0000:00:1c.7: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.827420] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.827421] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.827421] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.827422] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.827423] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.827424] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.827424] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.827425] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[ 0.827426] pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff window]
[ 0.827427] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.827428] pci_bus 0000:01: resource 1 [mem 0xf7700000-0xf78fffff]
[ 0.827428] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.827429] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.827430] pci_bus 0000:02: resource 1 [mem 0xf7700000-0xf77fffff]
[ 0.827431] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.827432] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.827432] pci_bus 0000:03: resource 1 [mem 0xf7700000-0xf77fffff]
[ 0.827433] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.827434] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.827435] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.827436] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.827436] pci_bus 0000:06: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.827437] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.827438] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
[ 0.827439] pci_bus 0000:08: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.827439] pci_bus 0000:09: resource 0 [io 0xa000-0xafff]
[ 0.827440] pci_bus 0000:09: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.827441] pci_bus 0000:0a: resource 0 [io 0x9000-0x9fff]
[ 0.827441] pci_bus 0000:0a: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.827543] NET: Registered protocol family 2
[ 0.827732] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.828022] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.828154] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.828181] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.828262] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.828369] NET: Registered protocol family 1
[ 0.875003] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.875153] PCI: CLS 64 bytes, default 64
[ 0.875188] Unpacking initramfs...
[ 1.139520] Freeing initrd memory: 17848K (ffff9a4975d13000 - ffff9a4976e81000)
[ 1.139522] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.139524] software IO TLB [mem 0xd96ae000-0xdd6ae000] (64MB) mapped at [ffff9a4a196ae000-ffff9a4a1d6adfff]
[ 1.139887] audit: initializing netlink subsys (disabled)
[ 1.139901] audit: type=2000 audit(1498835947.136:1): initialized
[ 1.140231] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 1.140283] zbud: loaded
[ 1.140794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.140817] io scheduler noop registered
[ 1.140817] io scheduler deadline registered
[ 1.140827] io scheduler cfq registered (default)
[ 1.141799] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.141803] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.141813] intel_idle: MWAIT substates: 0x42120
[ 1.141814] intel_idle: v0.4.1 model 0x3C
[ 1.142064] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.142233] GHES: HEST is not enabled!
[ 1.142272] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.162729] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.163074] Linux agpgart interface v0.103
[ 1.163132] AMD IOMMUv2 driver by Joerg Roedel<jroedel@suse.de>
[ 1.163133] AMD IOMMUv2 functionality not available on this system
[ 1.163632] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.166002] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.166006] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.166102] mousedev: PS/2 mouse device common for all mice
[ 1.166137] rtc_cmos 00:02: RTC can wake from S4
[ 1.166247] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.166269] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.166277] intel_pstate: Intel P-state driver initializing
[ 1.166710] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.168138] NET: Registered protocol family 10
[ 1.168687] mip6: Mobile IPv6
[ 1.168690] NET: Registered protocol family 17
[ 1.168695] mpls_gso: MPLS GSO support
[ 1.169391] microcode: sig=0x306c3, pf=0x2, revision=0x12
[ 1.169702] microcode: Microcode Update Driver: v2.01<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.169972] registered taskstats version 1
[ 1.170012] zswap: loaded using pool lzo/zbud
[ 1.170283] ima: No TPM chip found, activating TPM-bypass!
[ 1.171800] rtc_cmos 00:02: setting system clock to 2017-06-30 15:19:07 UTC (1498835947)
[ 1.171963] PM: Hibernation image not present or could not be loaded.
[ 1.174858] Freeing unused kernel memory: 1392K (ffffffff9db1e000 - ffffffff9dc7a000)
[ 1.174860] Write protecting the kernel read-only data: 12288k
[ 1.176061] Freeing unused kernel memory: 1988K (ffff9a4df760f000 - ffff9a4df7800000)
[ 1.182858] Freeing unused kernel memory: 1240K (ffff9a4df7aca000 - ffff9a4df7c00000)
[ 1.194461] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.211373] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.211422] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.211429] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.212140] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.212161] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.213040] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.213079] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.213273] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.213310] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.213343] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.234172] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.234173] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.234467] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.234468] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.235759] pps_core: LinuxPPS API ver. 1 registered
[ 1.235760] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti<giometti@linux.it>
[ 1.236050] PTP clock support registered
[ 1.236432] ACPI: bus type USB registered
[ 1.236454] usbcore: registered new interface driver usbfs
[ 1.236463] usbcore: registered new interface driver hub
[ 1.236474] dca service started, version 1.12.1
[ 1.236501] usbcore: registered new device driver usb
[ 1.237000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.237027] SCSI subsystem initialized
[ 1.237177] ehci-pci: EHCI PCI platform driver
[ 1.237425] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.237432] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.237446] ehci-pci 0000:00:1a.0: debug port 2
[ 1.238056] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.238056] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.238736] libata version 3.00 loaded.
[ 1.241345] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.241358] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7f18000
[ 1.241471] AVX2 version of gcm_enc/dec engaged.
[ 1.241472] AES CTR mode by8 optimization enabled
[ 1.258935] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.259070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.259071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.259072] usb usb1: Product: EHCI Host Controller
[ 1.259073] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.259074] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.259228] hub 1-0:1.0: USB hub found
[ 1.259251] hub 1-0:1.0: 2 ports detected
[ 1.259618] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.259623] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.259633] ehci-pci 0000:00:1d.0: debug port 2
[ 1.263528] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.263534] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
[ 1.266905] pps pps0: new PPS source ptp0
[ 1.266907] igb 0000:06:00.0: added PHC on eth0
[ 1.266908] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.266909] igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) ac:22:0b:8c:8d:46
[ 1.266956] igb 0000:06:00.0: eth0: PBA No: 001300-000
[ 1.266957] igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.282938] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.282967] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.282968] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.282969] usb usb2: Product: EHCI Host Controller
[ 1.282970] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.282970] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.283156] hub 2-0:1.0: USB hub found
[ 1.283162] hub 2-0:1.0: 2 ports detected
[ 1.283428] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.283432] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.284498] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.284502] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.284654] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.284656] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.284656] usb usb3: Product: xHCI Host Controller
[ 1.284657] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.284658] usb usb3: SerialNumber: 0000:00:14.0
[ 1.284770] hub 3-0:1.0: USB hub found
[ 1.284790] hub 3-0:1.0: 14 ports detected
[ 1.287453] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.287455] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.287488] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.287489] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.287489] usb usb4: Product: xHCI Host Controller
[ 1.287490] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.287490] usb usb4: SerialNumber: 0000:00:14.0
[ 1.287639] hub 4-0:1.0: USB hub found
[ 1.287648] hub 4-0:1.0: 6 ports detected
[ 1.288684] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.288688] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 1.288741] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.289430] ahci 0000:00:1f.2: version 3.0
[ 1.289611] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2 impl SATA mode
[ 1.289613] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.290185] scsi host0: ahci
[ 1.290300] scsi host1: ahci
[ 1.290379] scsi host2: ahci
[ 1.290451] scsi host3: ahci
[ 1.290529] scsi host4: ahci
[ 1.290601] scsi host5: ahci
[ 1.290629] ata1: DUMMY
[ 1.290633] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 39
[ 1.290633] ata3: DUMMY
[ 1.290634] ata4: DUMMY
[ 1.290634] ata5: DUMMY
[ 1.290634] ata6: DUMMY
[ 1.290818] ahci 0000:05:00.0: controller can do FBS, turning on CAP_FBS
[ 1.294030] xhci_hcd 0000:07:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[ 1.294226] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.294227] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.294228] usb usb5: Product: xHCI Host Controller
[ 1.294228] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.294229] usb usb5: SerialNumber: 0000:07:00.0
[ 1.294303] hub 5-0:1.0: USB hub found
[ 1.294308] hub 5-0:1.0: 2 ports detected
[ 1.294363] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.294365] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 1.296665] pps pps1: new PPS source ptp1
[ 1.296667] igb 0000:0a:00.0: added PHC on eth1
[ 1.296668] igb 0000:0a:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.296670] igb 0000:0a:00.0: eth1: (PCIe:2.5Gb/s:Width x1) ac:22:0b:8c:8d:47
[ 1.296741] igb 0000:0a:00.0: eth1: PBA No: 001300-000
[ 1.296742] igb 0000:0a:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.297225] igb 0000:0a:00.0 enp10s0: renamed from eth1
[ 1.297509] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.297518] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.297519] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.297519] usb usb6: Product: xHCI Host Controller
[ 1.297520] usb usb6: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.297520] usb usb6: SerialNumber: 0000:07:00.0
[ 1.297589] hub 6-0:1.0: USB hub found
[ 1.297594] hub 6-0:1.0: 2 ports detected
[ 1.301032] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.301034] ahci 0000:05:00.0: flags: 64bit ncq fbs pio
[ 1.301723] scsi host6: ahci
[ 1.301790] scsi host7: ahci
[ 1.301854] scsi host8: ahci
[ 1.301916] scsi host9: ahci
[ 1.301977] scsi host10: ahci
[ 1.302040] scsi host11: ahci
[ 1.302100] scsi host12: ahci
[ 1.302160] scsi host13: ahci
[ 1.302195] ata7: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10100 irq 40
[ 1.302197] ata8: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10180 irq 40
[ 1.302199] ata9: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10200 irq 40
[ 1.302200] ata10: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10280 irq 40
[ 1.302202] ata11: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10300 irq 40
[ 1.302203] ata12: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10380 irq 40
[ 1.302205] ata13: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10400 irq 40
[ 1.302206] ata14: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10480 irq 40
[ 1.302325] ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
[ 1.302364] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.302366] ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 1.302558] scsi host14: ahci
[ 1.302613] scsi host15: ahci
[ 1.302644] ata15: SATA max UDMA/133 abar m512@0xf7b00000 port 0xf7b00100 irq 49
[ 1.302646] ata16: SATA max UDMA/133 abar m512@0xf7b00000 port 0xf7b00180 irq 49
[ 1.306944] firewire_ohci 0000:09:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
[ 1.323087] igb 0000:06:00.0 enp6s0: renamed from eth0
[ 1.586921] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.605965] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.606703] ata2.00: ATA-9: WDC WD10EZRZ-00HTKB0, 01.01A01, max UDMA/133
[ 1.606705] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.607487] ata2.00: configured for UDMA/133
[ 1.607734] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZRZ-00H 1A01 PQ: 0 ANSI: 5
[ 1.610940] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.614921] usb 3-10: new low-speed USB device number 2 using xhci_hcd
[ 1.618105] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.618107] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.618134] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.618155] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.618177] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.618201] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.618221] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.618243] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.618268] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.618360] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.618524] ata14.00: configured for UDMA/66
[ 1.619673] ata7.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133
[ 1.621228] ata7.00: configured for UDMA/133
[ 1.639633] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.639634] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.639708] sd 1:0:0:0: [sda] Write Protect is off
[ 1.639710] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.639734] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.640860] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5
[ 1.656827] scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
[ 1.691838] sda: sda1 sda2 < sda5 >
[ 1.692753] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.735325] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.735327] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.735567] hub 1-1:1.0: USB hub found
[ 1.735629] hub 1-1:1.0: 6 ports detected
[ 1.759318] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.759320] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.759712] hub 2-1:1.0: USB hub found
[ 1.759764] hub 2-1:1.0: 8 ports detected
[ 1.762250] usb 3-10: New USB device found, idVendor=046a, idProduct=0001
[ 1.762251] usb 3-10: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 1.762252] usb 3-10: Manufacturer: Cherry GmbH
[ 1.763880] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.767977] usbcore: registered new interface driver usbhid
[ 1.767978] usbhid: USB HID core driver
[ 1.768476] input: Cherry GmbH as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:046A:0001.0001/input/input3
[ 1.822983] firewire_core 0000:09:00.0: created device fw0: GUID fedcba9876543210, S400
[ 1.827045] hid-generic 0003:046A:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:14.0-10/input0
[ 1.874960] usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.931302] usb 4-5: New USB device found, idVendor=174c, idProduct=3074
[ 1.931303] usb 4-5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.931304] usb 4-5: Product: ASM107x
[ 1.931305] usb 4-5: Manufacturer: Asmedia
[ 1.931316] usb 4-5: SerialNumber: 00000000A001
[ 1.932273] hub 4-5:1.0: USB hub found
[ 1.932393] hub 4-5:1.0: 4 ports detected
[ 1.969825] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.990978] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.990979] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.991117] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.014919] usb 3-13: new high-speed USB device number 3 using xhci_hcd
[ 2.142904] tsc: Refined TSC clocksource calibration: 2698.436 MHz
[ 2.142908] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26e579055f9, max_idle_ns: 440795252362 ns
[ 2.156927] usb 3-13: New USB device found, idVendor=174c, idProduct=2074
[ 2.156929] usb 3-13: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.156940] usb 3-13: Product: ASM107x
[ 2.156941] usb 3-13: Manufacturer: Asmedia
[ 2.156942] usb 3-13: SerialNumber: 00000000A001
[ 2.157474] hub 3-13:1.0: USB hub found
[ 2.157677] hub 3-13:1.0: 4 ports detected
[ 2.278898] usb 3-14: new low-speed USB device number 4 using xhci_hcd
[ 2.353244] PM: Starting manual resume from disk
[ 2.353247] PM: Hibernation image partition 8:5 present
[ 2.353247] PM: Looking for hibernation image.
[ 2.353385] PM: Image not found (code -22)
[ 2.353386] PM: Hibernation image not present or could not be loaded.
[ 2.427901] usb 3-14: New USB device found, idVendor=046d, idProduct=c03d
[ 2.427904] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.427905] usb 3-14: Product: USB-PS/2 Optical Mouse
[ 2.427907] usb 3-14: Manufacturer: Logitech
[ 2.431524] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:046D:C03D.0002/input/input4
[ 2.431689] hid-generic 0003:046D:C03D.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-14/input0
[ 2.490953] random: fast init done
[ 2.559142] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.166979] clocksource: Switched to clocksource tsc
[ 3.627461] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.678657] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.679047] systemd[1]: Detected architecture x86-64.
[ 3.695740] systemd[1]: Set hostname to <debian>.
[ 4.166845] random: crng init done
[ 4.471682] systemd[1]: Listening on udev Control Socket.
[ 4.472088] systemd[1]: Created slice System Slice.
[ 4.472336] systemd[1]: Created slice system-getty.slice.
[ 4.472423] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.472519] systemd[1]: Listening on Journal Socket.
[ 4.473502] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.474609] systemd[1]: Mounting Huge Pages File System...
[ 4.953492] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.063859] lp: driver loaded but no devices found
[ 5.178497] systemd-journald[302]: Received request to flush runtime journal from PID 1
[ 5.187389] ppdev: user-space parallel port driver
[ 6.730970] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 6.730974] ACPI: Power Button [PWRB]
[ 6.731011] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.731012] ACPI: Power Button [PWRF]
[ 6.745183] wmi: Mapper loaded
[ 6.785446] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.785447] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.785447] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.785448] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.785448] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.840630] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 7.079126] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.284856] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 7.284882] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 7.284907] scsi 13:0:0:0: Attached scsi generic sg2 type 3
[ 7.319996] [drm] Initialized
[ 7.390283] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[ 7.433359] iTCO_vendor_support: vendor-support=0
[ 7.436058] asus_wmi: ASUS WMI generic driver loaded
[ 7.437339] asus_wmi: Initialization: 0x0
[ 7.437359] asus_wmi: BIOS WMI version: 0.9
[ 7.437387] asus_wmi: SFUN value: 0x0
[ 7.437671] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[ 7.437706] asus_wmi: Number of fans: 1
[ 7.444591] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.444616] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 7.444688] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.640360] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:10.0/0000:03:00.1/sound/card1/input9
[ 7.683314][drm] radeon kernel modesetting enabled.
[ 7.828700] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 7.829245] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 7.829246] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.829247] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.829248] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.829248] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 7.829249] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.829250] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 7.829251] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 7.829252] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.841421] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.842100] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.842187] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.842263] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.842323] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.842397] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 7.842463] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 7.842506] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 7.842566] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 7.992742] CRAT table not found
[ 7.992743] Finished initializing topology ret=0
[ 7.992758] kfd kfd: Initialized module
[ 8.215942][drm:radeon_pci_probe [radeon]] *ERROR* radeon kernel modesetting for
R600 or later requires firmware-amd-graphics.
[ 8.826852] intel_rapl: Found RAPL domain package
[ 8.826855] intel_rapl: Found RAPL domain core
[ 8.826859] intel_rapl: Found RAPL domain dram
[ 9.549179] Adding 25100284k swap on /dev/sda5. Priority:-1 extents:1 across:25100284k FS
[ 17.049189] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 17.094424] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 17.096566] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
[ 17.141143] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
[ 18.390095] NET: Registered protocol family 4
[ 18.412731] NET: Registered protocol family 3
[ 18.413693] NET: Registered protocol family 5
[ 19.822708] igb 0000:06:00.0 enp6s0: igb: enp6s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 19.822983] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[ 23.199899] fuse init (API version 7.26)
root@debian:/home/XYZ#
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
I have bought a graphic card: the AMD FirePro 2460 multi view, this offers quad DisplayPort solutions. I work at the moment with two monitors, which have both
a solution from 1920 x 1200.
The debian installation works and I can see a picture, which is the same on both monitors with a solution from 1600 x 1200 pixel, I use normally KDE.
It appears an error message with: *Error* radeon kernel modesetting requires firmware-amd-graphics.
So I add contrib and non-free to /etc/apt/sources.list, make:
#apt-get update
#apt-get install firmware-amd-graphics firmware-linux-nonfree libgl1-mesa-dri xserver-xorg-video-ati
I found this information on this place:https://wiki.debian.org/AtiHowTo but I don't know, if this work for debian 9 stretch.
If I start the computer new, I see only now a black screen, with DisplayPort, Signal Error, not more.
I use the rescue mode and remove with #apt-get --purge remove firmware-amd-graphics. So I can work again with the same picture on both monitors, that's
better than nothing, but of course it would be great if I could work really with two monitors with two different pictures on it.
I have testeddebian-live-9.0.1-amd64-kde+nonfree.iso
<https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/9.0.1-live+nonfree/amd64/iso-hybrid/debian-live-9.0.1-amd64-kde+nonfree.iso> too, but I get here only a black screen again with show me only DisplayPort, Signal Error, nothing more.
I have found an other problem too. I use german layout, and the '_' sign is not on the right place of my keyboard, it is on 'ß' that sign.
It would be great, if you can update this page for debian 9 stretch"https://wiki.debian.org/AtiHowTo";
I love debian, and I will use it further.
Yours sincerely
a debian user, who loves debian.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--- End Message ---