Bug#921264: Successful installation in Slimbook Katana II
Package: installation-reports
Boot method: USB image, with non-free firmware
Image version:
https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/buster_di_alpha5+nonfree/amd64/iso-cd/firmware-buster-DI-alpha5-amd64-netinst.iso
Date: 2019-02-03 17:00 UTC
Machine: Slimbook Katana II
Processor: i7
Memory: 16 GB
Partitions: installed in the whole SSD (500 GB)
Filesystem Type 1K-blocks Used Available Use%
Mounted on
udev devtmpfs 8156772 0 8156772 0%
/dev
tmpfs tmpfs 1634440 34260 1600180 3%
/run
/dev/mapper/librito--vg-root ext4 462944072 4545088 434812988 2%
/
tmpfs tmpfs 8172196 8812 8163384 1%
/dev/shm
tmpfs tmpfs 5120 4 5116 1%
/run/lock
tmpfs tmpfs 8172196 0 8172196 0%
/sys/fs/cgroup
/dev/sda1 ext2 240972 48213 180318 22%
/boot
tmpfs tmpfs 1634436 3500 1630936 1%
/run/user/1000
tmpfs tmpfs 8172196 136 8172060 1%
/tmp
tmpfs tmpfs 8172196 0 8172196 0%
/var/tmp
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen
Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
Subsystem: Intel Corporation Xeon E3-1200 v6/7th Gen Core
Processor Host Bridge/DRAM Registers [8086:5904]
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics
620 [8086:5916] (rev 02)
Subsystem: Device [1991:5593]
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB
3.0 xHCI Controller [8086:9d2f] (rev 21)
Subsystem: Intel Corporation Sunrise Point-LP USB 3.0 xHCI
Controller [8086:9d2f]
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise
Point-LP Thermal subsystem [8086:9d31] (rev 21)
Subsystem: Intel Corporation Sunrise Point-LP Thermal subsystem
[8086:9d31]
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation Sunrise
Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Intel Corporation Sunrise Point-LP CSME HECI
[8086:9d3a]
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA
Controller [AHCI mode] [8086:9d03] (rev 21)
Subsystem: Intel Corporation Sunrise Point-LP SATA Controller
[AHCI mode] [8086:9d03]
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port [8086:9d10] (rev f1)
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #5 [8086:9d14] (rev f1)
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC
Controller [8086:9d58] (rev 21)
Subsystem: Intel Corporation Sunrise Point-LP LPC Controller
[8086:9d58]
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP
PMC [8086:9d21] (rev 21)
Subsystem: Intel Corporation Sunrise Point-LP PMC [8086:9d21]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD
Audio [8086:9d71] (rev 21)
Subsystem: Device [1991:0269]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus
[8086:9d23] (rev 21)
Subsystem: Intel Corporation Sunrise Point-LP SMBus [8086:9d23]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Network controller [0280]: Intel Corporation Wireless 7265
[8086:095a] (rev 3b)
Subsystem: Intel Corporation Dual Band Wireless-AC 7265
[8086:5110]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
No specific problem during the installation.
Reply to: