Re: Armel: Debian installer freeezes (GuruPlug Server plus)
NOTICE! Globalscale has bought at least two chunks of MAC-addresses,
this unit MAC's starts as F0:AD:*
Kari Tanninen
####################################################### Minicom terminal
output ########################################################
=> printenv
baudrate=115200
bootargs=console=ttyS0, 115200n8 earlyprintk
base-installer/initramfs-tools/driver-policy=most
bootargs_console=console=ttyS0, 115200 root=/dev/sdb2 rootdelay=10
base-installer/initramfs-tools/driver-policy=most
bootcmd=setenv bootargs ${bootargs_console}; run bootcmd_usb; run
bootcmd_fdt; bootm 0x00800000 0x01100000 0x0c000000;
bootcmd_fdt=fdt addr 0x0c000000; fdt resize; fdt chosen; fdt list
/chosen;
bootcmd_usb=usb start; usb start; ext2load usb 2:1 0x00800000 /uImage;
ext2load usb 2:1 0x01100000 /uInitrd; ext2load usb 2:1 0x0c000000 /guru
bootdelay=6
eth1addr=F0:AD:4A:00:47:00
ethact=egiga0
ethaddr=F0:AD:4A:00:46:FF
fdt_addr_r=0x0c000000
fdt_high=0xffffffff
fdtaddr=c000000
fileaddr=1100000
filesize=b2c4af
initrd_high=0xffffffff
ipaddr=10.4.50.6
kernel_addr_r=0x00800000
ramdisk_addr_r=0x01100000
serverip=10.4.50.5
stderr=serial
stdin=serial
stdout=serial
Environment size: 933/131068 bytes
=> tftp 0x00800000 uImage
Using egiga0 device
TFTP from server 10.4.50.5; our IP address is 10.4.50.6
Filename 'uImage'.
Load address: 0x800000
Loading:
#################################################################
#################################################################
###########
4.1 MiB/s
done
Bytes transferred = 2060842 (1f722a hex)
=> tftp 0x01100000 uInitrd
Using egiga0 device
TFTP from server 10.4.50.5; our IP address is 10.4.50.6
Filename 'uInitrd'.
Load address: 0x1100000
Loading:
*#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###################
4 MiB/s
done
Bytes transferred = 11715759 (b2c4af hex)
=> bootm 0x00800000 0x01100000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Debian kernel
Created: 2017-12-05 16:25:07 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2060778 Bytes = 2 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: debian-installer ramdisk
Created: 2017-12-05 16:25:07 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 11715695 Bytes = 11.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.0-4-marvell
(debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian
6.3.0-18) ) #1 Debian 4.9.65-3 (2017-12-03)
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE),
cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] OF: fdt:Machine model: Globalscale Technologies Guruplug
Server Plus
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0, 115200n8 earlyprintk
base-installer/initramfs-tools/driver-policy=most
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 502240K/524288K available (3778K kernel code,
395K rwdata, 1128K rodata, 296K init, 249K bss, 22048K reserved, 0K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc03b8b98 (3779 kB)
[ 0.000000] .init : 0xc04f4000 - 0xc053e000 ( 296 kB)
[ 0.000000] .data : 0xc053e000 - 0xc05a0d78 ( 396 kB)
[ 0.000000] .bss : 0xc05a0d78 - 0xc05df35c ( 250 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps
every 10737418237ns
[ 0.008443] Console: colour dummy device 80x30
[ 0.013050] Calibrating delay loop... 1185.79 BogoMIPS (lpj=2371584)
[ 0.042863] pid_max: default: 32768 minimum: 301
[ 0.047776] Security Framework initialized
[ 0.052015] Yama: disabled by default; enable with sysctl
kernel.yama.*
[ 0.058926] Mount-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.065696] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.073967] CPU: Testing write buffer coherency: ok
[ 0.079073] ftrace: allocating 16964 entries in 34 pages
[ 0.118676] Setting up static identity map for 0x8200 - 0x823c
[ 0.124914] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[ 0.133239] devtmpfs: initialized
[ 0.140788] VFP support v0.3: not present
[ 0.145141] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.155067] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.161537] pinctrl core: initialized pinctrl subsystem
[ 0.167957] NET: Registered protocol family 16
[ 0.172947] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.181412] cpuidle: using governor ladder
[ 0.185661] cpuidle: using governor menu
[ 0.190059] Feroceon L2: Enabling L2
[ 0.193805] Feroceon L2: Cache support initialised.
[ 0.199087] [Firmware Info]:
/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0:
local-mac-address is not set
[ 0.209754] [Firmware Info]:
/ocp@f1000000/ethernet-controller@76000/ethernet1-port@0:
local-mac-address is not set
[ 0.224283] No ATAGs?[ 0.231493] clocksource: Switched to
clocksource orion_clocksource
[ 0.250711] VFS: Disk quotas dquot_6.6.0
[ 0.254845] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.269907] NET: Registered protocol family 2
[ 0.275189] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.282437] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.289055] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.295651] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.301627] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.308205] NET: Registered protocol family 1
[ 0.312956] Unpacking initramfs...
[ 1.115517] random: fast init done
[ 1.292456] Freeing initrd memory: 11444K
[ 1.297329] audit: initializing netlink subsys (disabled)
[ 1.302928] audit: type=2000 audit(1.228:1): initialized
[ 1.308747] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 1.315428] zbud: loaded
[ 1.319744] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[ 1.327420] io scheduler noop registered
[ 1.331568] io scheduler cfq registered (default)
[ 1.337549] kirkwood-pinctrl f1010000.pin-controller: registered
pinctrl driver
[ 1.346732] mv_xor f1060800.xor: Marvell shared XOR driver
[ 1.380715] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor
cpy intr )
[ 1.388340] mv_xor f1060900.xor: Marvell shared XOR driver
[ 1.424701] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor
cpy intr )
[ 1.432495] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.439990] console [ttyS0] disabled
[ 1.443741] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25,
base_baud = 12500000) is a 16550A
Reply to: