[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#900964: debian-installer: debian missing firmware on the realteck ethernet controller witch firmware-9.4.0-amd64-netinst.iso

I apologize for the old email sent a little while ago: in this new email I will be 'more' accurate: the link of my network card is turned on but that 'despite I can not get the IP address from the router dhcp. If I try to enter it manually I can not ping the IP address of the router: this is due to the lack of the rt8169 firmware that I reported via the reportingbug. I await a response in a short time because in these situations I can not have a debian streatch perfectly installed and working. With best regards
Marco Pirola

Il 07/06/2018 13:48, root ha scritto:
Package: debian-installer
Version: debianinstaller
Severity: important

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

    * What led up to the situation?
    * What exactly did you do (or not do) that was effective (or
    * What was the outcome of this action?
    * What outcome did you expect instead?

*** End of the template - remove these template lines ***

-- System Information:
Debian Release: 9.4
   APT prefers stable-updates
   APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-6-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Dear maintener

I have in posses of the mainboard asus h81m-c witch integrateth ethernet  controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10).
During the installation the network card is detected but I am unable to
go on because in the iso firmware-9.4.0-amd64-netinst.iso the r8169
firmware is missing as specifically reported in my dmesg of which I copy
here 'under the email.
I request that the missing firmware is inserted in the iso.
Thank you and good day.
This is part of dmesg:
18.128417] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   18.128423] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have
ASPM control
[   18.138375] r8169 0000:03:00.0 eth0: RTL8168g/8111g at
0xffffbdbac0cb9000, 78:24:af:40:17:ea, XID 0c000800 IRQ 28
[   18.138377] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[   18.138775] r8169 0000:03:00.0 enp3s0: renamed from eth0
[   19.347154] r8169 0000:03:00.0: firmware: failed to load
rtl_nic/rtl8168g-2.fw (-2)
[   19.347156] r8169 0000:03:00.0: Direct firmware load for
rtl_nic/rtl8168g-2.fw failed with error -2
[   19.347158] r8169 0000:03:00.0 enp3s0: unable to load firmware patch
rtl_nic/rtl8168g-2.fw (-2)
[   19.360073] r8169 0000:03:00.0 enp3s0: link down
[   19.360090] r8169 0000:03:00.0 enp3s0: link down
[   19.360131] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready

Reply to: