[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#239431: marked as done (netcfg: Please give choice of whether to try DHCP)



Your message dated Sun, 14 May 2017 09:29:00 +0000
with message-id <16d69c28-88b9-6402-c6bd-be77f206b071@solveig.org>
and subject line closing bug report
has caused the Debian Bug report #237395,
regarding netcfg: Please give choice of whether to try DHCP
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
237395: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=237395
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Package: installation-reports

Debian-installer-version: beta 3 of the Debian-Installer from
http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-netinst.iso

uname -a: Linux vmdeb 2.4.25 #1 Sun Mar 21 10:27:58 EST 2004 i686 GNU/Linux
Date: 2004.03.21 ~1300EST
Method: CD Install for base, 'net thereafter.

Machine: VMware 4.5.1 running on a dual Athlon MP 1900 system.
Processor: AMD Athlon(tm) MP 1900+
Memory:  MemTotal:       255696 kB
Root Device: SCSI (faux VMware Buslogic)
Root Size/partition table: 3 devices configured
~ /dev/sda:
~    Name    Flags  Part Type  FS Type          [Label]    Size (MB)
- ---------------------------------------------------------------------
~    sda1           Primary   Linux ext2                     131.61
~    sda2           Primary   Linux swap                     509.97
~    sda3           Primary   Linux ReiserFS                3652.03

~ /dev/sdb and /dev/sdc configured in a single volume group, partitioned
to an LV. Here's current df output:

Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda3              3566284   1508344   2057940  43% /
/dev/sda1               120411      7144    106843   7% /boot
/dev/Storage_VG/Store  3997568     32840   3964728   1% /mnt/storage
tmpfs                   127848         0    127848   0% /dev/shm

Output of lspci:
vmdeb:~# lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 01)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 01)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:0f.0 VGA compatible controller: VMWare Inc: Unknown device 0405
00:10.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster
10] (rev 01)
00:11.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970
[PCnet32 LANCE] (rev 10)
00:12.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

First, kudos! Much better than previous installer betas. There was one
issue, and I of course have an opinion or two.

First, the issue: There was no cdrom entry in fstab when install was
complete. Easy fix, but momentarily confusing.

Opinions:
1. There are three visible Hardware Detection phases. I don't understand
why, and to the uneducated eye, it looks like a problem. If they are
doing different things, then say so in the dialog title, IMO.

2. During partition configuration, show all of the available fields from
the get-go. Admittedly, I didn't read EITHER installation guide prior to
doing the install, but then, I was testing the ability to hand someone a
CD and say GO.  When I used the new partitioning scheme, I didn't see
filesystem type going IN, so when I was coming out of the partition
usage dialog, I didn't see it then, either. I probably made 6 passes
through before it caught my eye. Too much work (and I've been installing
Debian for years, but I assume you want feedback even on your vast
improvements, neh?)

3. Even in the "simple" configuration routine, I want to have the option
to setup a static network interface, even though I've got DHCP running
internally. Even a little countdown from 5, without keypress continue
with DHCP detection, would be fine.

Overall excellent work!

thanks,

.brian

- --
Brian Bilbrey: bilbrey@orbdesigns.com and http://www.orbdesigns.com/
~    The record companies pretend they're protecting the rights of
~    the musicians, but you have to be deeply dumb to believe that.
			- Orson Scott Card via ornery.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFAXhMRfWcaCWxNjUIRAi4wAKCIVr+iZvJJGcGRDAfji9licFKUXgCgigKi
StGmTRstdKJI11MKh8GqnJA=
=p00j
-----END PGP SIGNATURE-----


--- End Message ---
--- Begin Message ---
Hi!

I'm closing this bug, since it was tagged "wontfix" for some
years, without answer. If you have new reasons to point out this
problem, please feel free to re-open it or ask me to do it.

You still can have the Installer behave in the way you wanted by doing
the install with a lower priority.

Thanks for reporting!

 Solveig

--- End Message ---

Reply to: