Package: installation-reports Version: 2.62 Severity: important Tags: d-i -- Package-specific info: Boot method: SD card Image version: https://d-i.debian.org/daily-images/armhf/daily/hd-media/SD-card-images/firmware.MX6_Cubox-i.img.gz https://d-i.debian.org/daily-images/armhf/daily/hd-media/SD-card-images/partition.img.gz and http://gemmei.acc.umu.se/cdimage/daily-builds/daily/arch-latest/armhf/iso-cd/debian-testing-armhf-netinst.iso downloaded 2017-02-08 Date: <Date and time of the install> Machine: CuBox-i 4 Pro Partitions: From the installation log: 7: MMC/SD card #2 (mmcblk1) - 15.9 GB SD SL16G, 8: > #1 primary 254.8 MB B f ext2 /boot , 9: > #2 primary 13.6 GB f ext4 / , 10: > #5 logical 2.1 GB f swap swap , 11: SCSI2 (0,0,0) (sda) - 4.2 GB Generic Flash Disk, Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Clock/timezone setup: [O] User/password setup: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Install tasks: [O] Install boot loader: [E] Overall install: [E] Comments/Problems: I am installing the system on the same media that was used to boot the installer from; this is supported according to the installation manual sect. 5.1.5 (last paragraph). If I ask the partitioner to use the «Guided - use entire disk» option, the install process _seems_to_ be successful, but I end up with a nonbooting system (U-boot seems to be clobbered, as it does not do anything at powerup); selecting «Guided - use the largest continuous free space» results in a correctly booting system. I am attaching two log files, «cubox-clobbered-uboot.log» and «cubox-boots-correctly.log». As a very minor issue, even in the second case, after the install notifies «Requesting system reboot», it just hangs. I disconnected and reconnected power to get the system to boot — But it booted correctly after that. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="9 (stretch) - installer build 20170208-00:09" X_INSTALLATION_MEDIUM=hd-media ============================================== Installer hardware-summary: ============================================== uname -a: Linux debian 4.9.0-1-armmp #1 SMP Debian 4.9.6-3 (2017-01-28) armv7l GNU/Linux usb-list: usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 01 usb-list: Manufacturer: Linux 4.9.0-1-armmp ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 02 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 01 usb-list: Manufacturer: Linux 4.9.0-1-armmp ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 02 Device 02: Mass Storage [058f:6387] usb-list: Level 01 Parent 01 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: Generic usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver usb-storage lsmod: Module Size Used by lsmod: dm_mod 102858 0 lsmod: md_mod 120554 0 lsmod: jfs 174436 0 lsmod: btrfs 1143362 0 lsmod: xor 4718 1 btrfs lsmod: zlib_deflate 20290 1 btrfs lsmod: raid6_pq 87373 1 btrfs lsmod: fuse 88991 0 lsmod: brcmfmac 239877 0 lsmod: brcmutil 5789 1 brcmfmac lsmod: cfg80211 475000 1 brcmfmac lsmod: rfkill 16819 1 cfg80211 lsmod: nls_utf8 1318 1 lsmod: loop 17534 2 lsmod: isofs 32049 1 lsmod: ext4 549443 2 lsmod: crc16 1274 1 ext4 lsmod: jbd2 93854 1 ext4 lsmod: crc32c_generic 1862 3 lsmod: fscrypto 15747 1 ext4 lsmod: mbcache 5508 3 ext4 lsmod: nls_ascii 3386 1 lsmod: nls_cp437 4922 1 lsmod: vfat 10313 1 lsmod: fat 57141 1 vfat lsmod: sd_mod 32731 2 lsmod: uas 12934 0 lsmod: usb_storage 45771 2 uas lsmod: imx_ipuv3_crtc 10746 0 lsmod: ahci_imx 6207 0 lsmod: libahci_platform 6494 1 ahci_imx lsmod: ci_hdrc_imx 6936 0 lsmod: libahci 23377 2 libahci_platform,ahci_imx lsmod: ci_hdrc 35216 1 ci_hdrc_imx lsmod: libata 192873 3 libahci_platform,libahci,ahci_imx lsmod: ehci_hcd 64996 1 ci_hdrc lsmod: extcon_core 13223 1 ci_hdrc lsmod: udc_core 26335 1 ci_hdrc lsmod: imx_ipu_v3 75709 1 imx_ipuv3_crtc lsmod: scsi_mod 187972 4 sd_mod,usb_storage,libata,uas lsmod: sdhci_esdhc_imx 12147 0 lsmod: sdhci_pltfm 3338 1 sdhci_esdhc_imx lsmod: usbcore 195888 5 usb_storage,ehci_hcd,brcmfmac,uas,ci_hdrc lsmod: sdhci 39260 2 sdhci_pltfm,sdhci_esdhc_imx lsmod: usb_common 3659 3 udc_core,usbcore,ci_hdrc lsmod: usbmisc_imx 6594 1 ci_hdrc_imx lsmod: phy_mxs_usb 6386 2 lsmod: anatop_regulator 4712 1 lsmod: dw_hdmi_imx 3203 0 lsmod: dw_hdmi 14062 1 dw_hdmi_imx lsmod: imxdrm 5486 1 imx_ipuv3_crtc lsmod: drm_kms_helper 117262 3 imx_ipuv3_crtc,dw_hdmi,imxdrm lsmod: drm 276096 5 imx_ipuv3_crtc,dw_hdmi,dw_hdmi_imx,imxdrm,drm_kms_helper df: Filesystem 1K-blocks Used Available Use% Mounted on df: none 206592 76 206516 0% /run df: devtmpfs 1017956 0 1017956 0% /dev df: /dev/sda1 4068576 360716 3707860 9% /hd-media df: /dev/loop0 360712 360712 0 100% /cdrom df: /dev/mmcblk1p3 12976824 470844 11827068 4% /target df: /dev/mmcblk1p2 240972 25124 203407 11% /target/boot df: /dev/mmcblk1p3 12976824 470844 11827068 4% /dev/.static/dev df: devtmpfs 1017956 0 1017956 0% /target/dev df: /dev/loop0 360712 360712 0 100% /target/media/cdrom free: total used free shared buffers free: Mem: 2065916 958916 1107000 98612 65964 free: -/+ buffers: 892952 1172964 free: Swap: 2016252 0 2016252 /proc/cmdline: console=ttymxc0,115200 DEBIAN_FRONTEND=text priority=critical /proc/cpuinfo: processor : 0 /proc/cpuinfo: model name : ARMv7 Processor rev 10 (v7l) /proc/cpuinfo: BogoMIPS : 6.00 /proc/cpuinfo: Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 /proc/cpuinfo: CPU implementer : 0x41 /proc/cpuinfo: CPU architecture: 7 /proc/cpuinfo: CPU variant : 0x2 /proc/cpuinfo: CPU part : 0xc09 /proc/cpuinfo: CPU revision : 10 /proc/cpuinfo: /proc/cpuinfo: processor : 1 /proc/cpuinfo: model name : ARMv7 Processor rev 10 (v7l) /proc/cpuinfo: BogoMIPS : 6.00 /proc/cpuinfo: Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 /proc/cpuinfo: CPU implementer : 0x41 /proc/cpuinfo: CPU architecture: 7 /proc/cpuinfo: CPU variant : 0x2 /proc/cpuinfo: CPU part : 0xc09 /proc/cpuinfo: CPU revision : 10 /proc/cpuinfo: /proc/cpuinfo: processor : 2 /proc/cpuinfo: model name : ARMv7 Processor rev 10 (v7l) /proc/cpuinfo: BogoMIPS : 6.00 /proc/cpuinfo: Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 /proc/cpuinfo: CPU implementer : 0x41 /proc/cpuinfo: CPU architecture: 7 /proc/cpuinfo: CPU variant : 0x2 /proc/cpuinfo: CPU part : 0xc09 /proc/cpuinfo: CPU revision : 10 /proc/cpuinfo: /proc/cpuinfo: processor : 3 /proc/cpuinfo: model name : ARMv7 Processor rev 10 (v7l) /proc/cpuinfo: BogoMIPS : 6.00 /proc/cpuinfo: Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 /proc/cpuinfo: CPU implementer : 0x41 /proc/cpuinfo: CPU architecture: 7 /proc/cpuinfo: CPU variant : 0x2 /proc/cpuinfo: CPU part : 0xc09 /proc/cpuinfo: CPU revision : 10 /proc/cpuinfo: /proc/cpuinfo: Hardware : Freescale i.MX6 Quad/DualLite (Device Tree) /proc/cpuinfo: Revision : 0000 /proc/cpuinfo: Serial : 0000000000000000 /proc/device-tree/model: SolidRun Cubox-i Dual/Quad /proc/iomem: 00110000-00111fff : /soc/dma-apbh@00110000 /proc/iomem: 00900000-0093ffff : 900000.sram /proc/iomem: 02020000-02023fff : /soc/aips-bus@02000000/spba-bus@02000000/serial@02020000 /proc/iomem: 0209c000-0209ffff : /soc/aips-bus@02000000/gpio@0209c000 /proc/iomem: 020a0000-020a3fff : /soc/aips-bus@02000000/gpio@020a0000 /proc/iomem: 020a4000-020a7fff : /soc/aips-bus@02000000/gpio@020a4000 /proc/iomem: 020a8000-020abfff : /soc/aips-bus@02000000/gpio@020a8000 /proc/iomem: 020ac000-020affff : /soc/aips-bus@02000000/gpio@020ac000 /proc/iomem: 020b0000-020b3fff : /soc/aips-bus@02000000/gpio@020b0000 /proc/iomem: 020b4000-020b7fff : /soc/aips-bus@02000000/gpio@020b4000 /proc/iomem: 020c9000-020c9fff : /soc/aips-bus@02000000/usbphy@020c9000 /proc/iomem: 020ca000-020cafff : /soc/aips-bus@02000000/usbphy@020ca000 /proc/iomem: 020e0000-020e3fff : /soc/aips-bus@02000000/iomuxc@020e0000 /proc/iomem: 020ec000-020effff : /soc/aips-bus@02000000/sdma@020ec000 /proc/iomem: 02184000-021841ff : /soc/aips-bus@02100000/usb@02184000 /proc/iomem: 02184000-021841ff : /soc/aips-bus@02100000/usb@02184000 /proc/iomem: 02184200-021843ff : /soc/aips-bus@02100000/usb@02184200 /proc/iomem: 02184200-021843ff : /soc/aips-bus@02100000/usb@02184200 /proc/iomem: 02184800-021849ff : /soc/aips-bus@02100000/usbmisc@02184800 /proc/iomem: 02188000-0218bfff : /soc/aips-bus@02100000/ethernet@02188000 /proc/iomem: 02190000-02193fff : /soc/aips-bus@02100000/usdhc@02190000 /proc/iomem: 02194000-02197fff : /soc/aips-bus@02100000/usdhc@02194000 /proc/iomem: 021f0000-021f3fff : /soc/aips-bus@02100000/serial@021f0000 /proc/iomem: 02200000-02203fff : /soc/sata@02200000 /proc/iomem: 10000000-8fffffff : System RAM /proc/iomem: 10008000-10afffff : Kernel code /proc/iomem: 10c00000-10d54103 : Kernel data /proc/interrupts: CPU0 CPU1 CPU2 CPU3 /proc/interrupts: 16: 78447 111212 97855 91134 GIC-0 29 Edge twd /proc/interrupts: 17: 0 0 0 0 GPC 55 Level i.MX Timer Tick /proc/interrupts: 25: 830 0 0 0 GPC 26 Level 2020000.serial /proc/interrupts: 50: 0 0 0 0 GPC 19 Level rtc alarm /proc/interrupts: 56: 0 0 0 0 GPC 2 Level sdma /proc/interrupts: 57: 147 0 0 0 GPC 43 Level 2184000.usb /proc/interrupts: 58: 15942 0 0 0 GPC 40 Level 2184200.usb /proc/interrupts: 59: 5564 0 0 0 GIC-0 150 Level 2188000.ethernet /proc/interrupts: 60: 0 0 0 0 GIC-0 151 Level 2188000.ethernet /proc/interrupts: 61: 1418 0 0 0 GPC 22 Level mmc0 /proc/interrupts: 62: 1662766 0 0 0 GPC 23 Level mmc1 /proc/interrupts: 66: 0 0 0 0 GPC 29 Level 21f0000.serial /proc/interrupts: 69: 0 0 0 0 GPC 39 Level ahci-imx[2200000.sata] /proc/interrupts: 77: 0 0 0 0 gpio-mxc 4 Edge 2194000.usdhc cd /proc/interrupts: 145: 0 0 0 0 gpio-mxc 8 Edge Button 0 /proc/interrupts: 297: 0 0 0 0 IPU 457 Edge (null) /proc/interrupts: 298: 0 0 0 0 IPU 451 Edge (null) /proc/interrupts: 299: 0 0 0 0 IPU 457 Edge (null) /proc/interrupts: 300: 0 0 0 0 IPU 451 Edge (null) /proc/interrupts: IPI0: 0 0 0 0 CPU wakeup interrupts /proc/interrupts: IPI1: 0 0 0 0 Timer broadcast interrupts /proc/interrupts: IPI2: 60279 215955 274690 445238 Rescheduling interrupts /proc/interrupts: IPI3: 148 120 3945 154 Function call interrupts /proc/interrupts: IPI4: 0 0 0 0 CPU stop interrupts /proc/interrupts: IPI5: 1 0 0 0 IRQ work interrupts /proc/interrupts: IPI6: 0 0 0 0 completion interrupts /proc/interrupts: Err: 0 /proc/meminfo: MemTotal: 2065916 kB /proc/meminfo: MemFree: 1107036 kB /proc/meminfo: MemAvailable: 1855904 kB /proc/meminfo: Buffers: 65964 kB /proc/meminfo: Cached: 792644 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 277872 kB /proc/meminfo: Inactive: 598812 kB /proc/meminfo: Active(anon): 73180 kB /proc/meminfo: Inactive(anon): 43504 kB /proc/meminfo: Active(file): 204692 kB /proc/meminfo: Inactive(file): 555308 kB /proc/meminfo: Unevictable: 0 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: HighTotal: 1310720 kB /proc/meminfo: HighFree: 491592 kB /proc/meminfo: LowTotal: 755196 kB /proc/meminfo: LowFree: 615444 kB /proc/meminfo: SwapTotal: 2016252 kB /proc/meminfo: SwapFree: 2016252 kB /proc/meminfo: Dirty: 920 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 18196 kB /proc/meminfo: Mapped: 2576 kB /proc/meminfo: Shmem: 98612 kB /proc/meminfo: Slab: 61420 kB /proc/meminfo: SReclaimable: 50880 kB /proc/meminfo: SUnreclaim: 10540 kB /proc/meminfo: KernelStack: 1016 kB /proc/meminfo: PageTables: 488 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 3049208 kB /proc/meminfo: Committed_AS: 124712 kB /proc/meminfo: VmallocTotal: 245760 kB /proc/meminfo: VmallocUsed: 0 kB /proc/meminfo: VmallocChunk: 0 kB /proc/meminfo: CmaTotal: 16384 kB /proc/meminfo: CmaFree: 15892 kB /proc/bus/input/devices: I: Bus=0019 Vendor=0001 Product=0001 Version=0100 /proc/bus/input/devices: N: Name="gpio-keys" /proc/bus/input/devices: P: Phys=gpio-keys/input0 /proc/bus/input/devices: S: Sysfs=/devices/soc0/gpio-keys/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers= /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=3 /proc/bus/input/devices: B: KEY=1 0 0 0 0 0 0 0 0 /proc/bus/input/devices: -- System Information: Debian Release: 9.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 4.8.0-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:3.5.2-1 ii reportbug 7.1.4 installation-report suggests no packages. -- no debconf information
setenv console ttymx0 c0,115200 DEBIAN_FRONTEND=text priority=critical
=> boot
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
1575 bytes read in 15 ms (102.5 KiB/s)
## Executing script at 12000000
Mainline u-boot / new-style environment detected.
reading vmlinuz
3700064 bytes read in 218 ms (16.2 MiB/s)
reading dtbs/imx6q-cubox-i.dtb
35234 bytes read in 298 ms (115.2 KiB/s)
reading initrd.gz
12893917 bytes read in 733 ms (16.8 MiB/s)
Booting the Debian installer...
## Flattened Device Tree blob at 18000000
Booting using the fdt blob at 0x18000000
Using Device Tree in place at 18000000, end 1800b9a1
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.0-1-armmp (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170124 (Debian 6.3.0-5) ) #1 SMP Debian 4.9.6-3 (2017-01-28)
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: SolidRun Cubox-i Dual/Quad
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x8f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 14 pages/cpu @eeda4000 s27724 r8192 d21428 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522560
[ 0.000000] Kernel command line: console=ttymxc0,115200 DEBIAN_FRONTEND=text priority=critical
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2035916K/2097152K available (7168K kernel code, 957K rwdata, 2212K rodata, 1024K init, 396K bss, 44852K reserved, 16384K cma-reserved, 1294336K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
[ 0.000000] .data : 0xc0c00000 - 0xc0cef47c ( 958 kB)
[ 0.000000] .bss : 0xc0cf1000 - 0xc0d54104 ( 397 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 errata 752271 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[ 0.000030] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[ 0.003240] Console: colour dummy device 80x30
[ 0.003282] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000)
[ 0.003299] pid_max: default: 32768 minimum: 301
[ 0.003630] Security Framework initialized
[ 0.003644] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003673] AppArmor: AppArmor disabled by boot time parameter
[ 0.003781] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003796] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004893] CPU: Testing write buffer coherency: ok
[ 0.004927] ftrace: allocating 26622 entries in 79 pages
[ 0.077228] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.077312] Setting up static identity map for 0x10100000 - 0x10100098
[ 0.082395] EFI services will not be available.
[ 0.083769] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.084835] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.085826] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.085924] Brought up 4 CPUs
[ 0.085947] SMP: Total of 4 processors activated (24.00 BogoMIPS).
[ 0.085955] CPU: All CPU(s) started in SVC mode.
[ 0.087021] devtmpfs: initialized
[ 0.097762] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.098164] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.099282] pinctrl core: initialized pinctrl subsystem
[ 0.101008] NET: Registered protocol family 16
[ 0.103538] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105764] CPU identified as i.MX6Q, silicon rev 1.2
[ 0.127381] No ATAGs?
[ 0.127417] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.127428] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.129003] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.129670] Serial: AMBA PL011 UART driver
[ 0.130860] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
[ 0.167880] mxs-dma 110000.dma-apbh: initialized
[ 0.173080] vgaarb: loaded
[ 0.174420] media: Linux media interface: v0.10
[ 0.174477] Linux video capture interface: v2.00
[ 0.174571] pps_core: LinuxPPS API ver. 1 registered
[ 0.174579] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.174606] PTP clock support registered
[ 0.176343] clocksource: Switched to clocksource mxc_timer1
[ 0.229217] VFS: Disk quotas dquot_6.6.0
[ 0.229326] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.244178] NET: Registered protocol family 2
[ 0.245057] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.245140] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.245269] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.245370] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.245416] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.245667] NET: Registered protocol family 1
[ 0.246237] Unpacking initramfs...
[ 1.220647] Freeing initrd memory: 12592K (c3000000 - c3c4c000)
[ 1.221227] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 1.223806] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.223971] audit: initializing netlink subsys (disabled)
[ 1.224067] audit: type=2000 audit(1.175:1): initialized
[ 1.224810] Initialise system trusted keyrings
[ 1.225267] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.225509] zbud: loaded
[ 1.705562] Key type asymmetric registered
[ 1.705576] Asymmetric key parser 'x509' registered
[ 1.705655] bounce: pool size: 64 pages
[ 1.705747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.705899] io scheduler noop registered
[ 1.705912] io scheduler deadline registered
[ 1.705983] io scheduler cfq registered (default)
[ 1.715785] imx-sdma 20ec000.sdma: firmware: failed to load imx/sdma/sdma-imx6q.bin (-2)
[ 1.715803] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 1.721610] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.723845] Serial: AMBA driver
[ 1.724690] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX
[ 2.381620] console [ttymxc0] enabled
[ 2.386317] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 66, base_baud = 5000000) is a IMX
[ 2.398587] libphy: Fixed MDIO Bus: probed
[ 2.403504] 2188000.ethernet supply phy not found, using dummy regulator
[ 2.413911] pps pps0: new PPS source ptp0
[ 2.429438] libphy: fec_enet_mii_bus: probed
[ 2.434488] fec 2188000.ethernet eth0: registered PHC device 0
[ 2.441360] mousedev: PS/2 mouse device common for all mice
[ 2.449443] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
[ 2.461898] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.468968] NET: Registered protocol family 10
[ 2.474543] mip6: Mobile IPv6
[ 2.477556] NET: Registered protocol family 17
[ 2.482037] mpls_gso: MPLS GSO support
[ 2.486911] ThumbEE CPU extension supported.
[ 2.491202] Registering SWP/SWPB emulation handler
[ 2.496921] registered taskstats version 1
[ 2.501031] Loading compiled-in X.509 certificates
[ 2.515950] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 2.526130] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 2.533747] zswap: loaded using pool lzo/zbud
[ 2.551205] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
[ 2.558737] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
[ 2.565453] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
[ 2.571575] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0)
[ 2.571582] sr_init: No PMIC hook to init smartreflex
[ 2.571767] sr_init: platform driver register failed for SR
[ 2.572278] brcm_reg: disabling
[ 2.572284] usb_h1_vbus: disabling
[ 2.572287] usb_otg_vbus: disabling
[ 2.602824] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
[ 2.667544] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.675470] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.675728] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.678120] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.678243] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.678727] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.679167] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.679742] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.680615] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.681092] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.900903] [drm] Initialized
[ 2.926781] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
[ 2.969057] sdhci: Secure Digital Host Controller Interface driver
[ 2.975325] sdhci: Copyright(c) Pierre Ossman
[ 3.001168] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.007671] usbcore: registered new interface driver usbfs
[ 3.013406] usbcore: registered new interface driver hub
[ 3.014727] SCSI subsystem initialized
[ 3.018045] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq
[ 3.029624] imx-ipuv3 2400000.ipu: IPUv3H probed
[ 3.036549] imx-ipuv3 2800000.ipu: IPUv3H probed
[ 3.040236] usbcore: registered new device driver usb
[ 3.058609] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044
[ 3.065532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.073028] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000
[ 3.080558] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
[ 3.088318] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
[ 3.100920] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 3.108049] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 3.116900] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 3.129626] scsi host0: ahci-imx
[ 3.134312] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 69
[ 3.154796] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.161469] [drm] No driver support for vblank timestamp query.
[ 3.167634] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 3.176677] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 3.185722] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 3.194745] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 3.203852] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]): -517
[ 3.215262] imx-drm display-subsystem: master bind failed: -517
[ 3.311391] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[ 3.319658] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.326347] [drm] No driver support for vblank timestamp query.
[ 3.327006] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 3.327030] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 3.341380] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 3.341651] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.341660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.341666] usb usb1: Product: EHCI Host Controller
[ 3.341673] usb usb1: Manufacturer: Linux 4.9.0-1-armmp ehci_hcd
[ 3.341677] usb usb1: SerialNumber: ci_hdrc.0
[ 3.342580] hub 1-0:1.0: USB hub found
[ 3.342628] hub 1-0:1.0: 1 port detected
[ 3.347679] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 3.347710] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 3.361373] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 3.361611] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.361620] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.361627] usb usb2: Product: EHCI Host Controller
[ 3.361634] usb usb2: Manufacturer: Linux 4.9.0-1-armmp ehci_hcd
[ 3.361638] usb usb2: SerialNumber: ci_hdrc.1
[ 3.362422] hub 2-0:1.0: USB hub found
[ 3.362466] hub 2-0:1.0: 1 port detected
[ 3.364202] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
[ 3.364242] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
[ 3.421607] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[ 3.462824] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.472769] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.474436] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.474503] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.474551] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.477844] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]): -517
[ 3.478017] imx-drm display-subsystem: master bind failed: -517
[ 3.478727] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.478730] [drm] No driver support for vblank timestamp query.
[ 3.478800] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.478840] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.478884] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.478923] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.479099] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]): -517
[ 3.479236] imx-drm display-subsystem: master bind failed: -517
[ 3.501250] mmc0: queuing unknown CIS tuple 0x80 (50 bytes)
[ 3.509831] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.511903] mmc0: queuing unknown CIS tuple 0x80 (4 bytes)
[ 3.541363] mmc0: queuing unknown CIS tuple 0x02 (1 bytes)
[ 3.545525] random: fast init done
[ 3.549317] mmc0: new SDIO card at address 0001
[ 3.621626] ahci-imx 2200000.sata: no device found, disabling link.
[ 3.627919] ahci-imx 2200000.sata: pass .hotplug=1 to enable hotplug
[ 3.634394] mmc1: host does not support reading read-only switch, assuming write-enable
[ 3.651870] mmc1: new high speed SDHC card at address aaaa
[ 3.658753] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
[ 3.665294] mmcblk1: p1
[ 3.669965] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.676686] [drm] No driver support for vblank timestamp query.
[ 3.682876] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.692545] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.702294] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.706411] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[ 3.718470] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_drm_driver_exit [imx_ipuv3_crtc])
[ 3.728357] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]): -517
[ 3.739939] imx-drm display-subsystem: master bind failed: -517
Starting system log daemon: syslogd, klogd.
/var/run/utmp: No such file or directory
[4l[?1h=[0m(B[1;24r[H[J[H[J[7m
[m[7m
[m
[H[7m
[m[H[7m[m[32m[40m[ [37m[31m ([37m-*[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m[31m ([37m0*start[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m[31m ([37m0*start[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m[31m ([37m0*start[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[J[7m[m[32m[40m[ [37m[31m ([37m0*start[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[3;80H [5;80H [7;80H [9;80H [11;80H [13;80H [15;80H [17;80H [19;80H [21;80H [23;80H [H[7m[m[32m[40m[ [37m[31m ([37m0*start[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m][23;80H[0m[2;1H[H[7m[m[32m[40m[ [37m[31m ([37m0*start[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0- start [31m ([37m2*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0- start [31m ([37m2*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0- start [31m ([37m2*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[J[7m[m[32m[40m[ [37m0- start [31m ([37m2*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[2;80H [4;80H [6;80H [8;80H [10;80H [12;80H [14;80H [16;80H [18;80H [20;80H [22;80H [24;80H [H[7m[m[32m[40m[ [37m0- start [31m ([37m2*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m][24;80H[0m[2;1H[H[7m[m[32m[40m[ [37m0- start [31m ([37m2*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start 2- shell [31m ([37m3*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start 2- shell [31m ([37m3*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start 2- shell [31m ([37m3*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[J[7m[m[32m[40m[ [37m0 start 2- shell [31m ([37m3*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[3;80H [5;80H [7;80H [9;80H [11;80H [13;80H [15;80H [17;80H [19;80H [21;80H [23;80H [H[7m[m[32m[40m[ [37m0 start 2- shell [31m ([37m3*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m][23;80H[0m[2;1H[H[7m[m[32m[40m[ [37m0 start 2- shell [31m ([37m3*shell[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start 2 shell 3- shell [31m ([37m4*log[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start 2 shell 3- shell [31m ([37m4*log[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start 2 shell 3- shell [31m ([37m4*log[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[J[7m[m[32m[40m[ [37m0 start 2 shell 3- shell [31m ([37m4*log[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[2;80H [4;80H [6;80H [8;80H [10;80H [12;80H [14;80H [16;80H [18;80H [20;80H [22;80H [24;80H [H[7m[m[32m[40m[ [37m0 start 2 shell 3- shell [31m ([37m4*log[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m][24;80H[0m[2;1H[H[7m[m[32m[40m[ [37m0 start 2 shell 3- shell [31m ([37m4*log[31m)[37m [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start [31m ([37m1*shell[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start [31m ([37m1*shell[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start [31m ([37m1*shell[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[J[7m[m[32m[40m[ [37m0 start [31m ([37m1*shell[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[3;80H [5;80H [7;80H [9;80H [11;80H [13;80H [15;80H [17;80H [19;80H [21;80H [23;80H [H[7m[m[32m[40m[ [37m0 start [31m ([37m1*shell[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m][23;80H[0m[2;1H[H[7m[m[32m[40m[ [37m0 start [31m ([37m1*shell[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start [31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m]
[0m[H[7m[m[32m[40m[ [37m0 start [31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m]
[0mSelect a language
-----------------
Choose the language to be used for the installation process. The selected
language will also be the default language for the installed system.
Language:
1: C,
2: English [*],
Prompt: '?' for help, default=2> [H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:00 [32m][10;34H[0m
Select your location
--------------------
The selected location will be used to set your time zone and also for example
to help select the system locale. Normally this should be the country where you
live.
This is a shortlist of locations based on the language you selected. Choose
"other" if your location is not listed.
Country, territory or area:
1: Antigua and Barbuda, 7: Ireland, 13: South Africa,
2: Australia, 8: Israel, 14: United Kingdom,
3: Botswana, 9: New Zealand, 15: United States [*],
[22A[M[22B 4: Canada, 10: Nigeria, 16: Zambia,
[22A[M[22B 5: Hong Kong, 11: Philippines, 17: Zimbabwe,
[22A[M[22B 6: India, 12: Singapore, 18: other,
[22A[M[22BPrompt: '?' for help, default=15> 18
[22A[M[22B[22A[M[22BThe selected location will be used to set your time zone and also for example
[22A[M[22Bto help select the system locale. Normally this should be the country where you
[22A[M[22Blive.
[22A[M[22B[22A[M[22BSelect the continent or region to which your location belongs.
[22A[M[22BContinent or region:
[22A[M[22B 1: Africa, 5: Caribbean, 9: North America [*],
[22A[M[22B 2: Antarctica, 6: Central America, 10: Oceania,
[22A[M[22B 3: Asia, 7: Europe, 11: South America,
[22A[M[22B 4: Atlantic Ocean, 8: Indian Ocean, 12: other,
[22A[M[22BPrompt: '?' for help, default=9>
[22A[M[22B[22A[M[22BThe selected location will be used to set your time zone and also for example
[22A[M[22Bto help select the system locale. Normally this should be the country where you
[22A[M[22Blive.
[22A[M[22B[22A[M[22BListed are locations for: North America. Use the <Go Back> option to select a
[22A[M[22Bdifferent continent or region if your location is not listed.
[22A[M[22BCountry, territory or area:
[22A[M[22B 1: Canada, 3: Saint Pierre and Miquelon,
[22A[M[22B 2: Mexico, 4: United States [*],
[22A[M[22BPrompt: '?' for help, default=4> 2
[22A[M[22B[22A[M[22BDetecting hardware to find hard drives ... 95%... 100%
[22A[M[22BSearching drives for an installer ISO image ... 25%... 50%... 75%... 100%
[22A[M[22BLoading additional components ... 10%... 20%... 30%... 40%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:01 [32m][24;60H[0m... 50%... 60%... 70%[2;24r[24;1H
[23;80H%... 80%... 90%... 100%
Detecting network hardware ... 95%... 100%
Detecting link on eth0; please wait... ... 16%... 25%... 33%... 41%... 50%... 6
[23;80H66%... 75%... 83%... 91%
Waiting for link-local address... ... 16%... 25%... 33%... 41%... 50%... 66%...
[23;80H. 75%... 83%... 91%... 100%
Configuring the network with DHCP [H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:02 [32m][24;36H[0m... 12%... 20%... 32%... 40%... 52%... 60%...
[23;80H. 72%... 80%... 92%... 100%
Configure the network
---------------------
Network autoconfiguration failed
Your network is probably not using the DHCP protocol. Alternatively, the DHCP
server may be slow or some network hardware is not working properly.
[Press enter to continue]
>From here you can choose to retry DHCP network autoconfiguration (which may
succeed if your DHCP server takes a long time to respond) or to configure the
network manually. Some DHCP servers require a DHCP hostname to be sent by the
client, so you can also choose to retry DHCP network autoconfiguration with a
hostname that you provide.
Network configuration method:
1: Retry network autoconfiguration,
2: Retry network autoconfiguration with a DHCP hostname,
3: Configure network manually [*],
4: ,
5: Do not configure the network at this time,
Prompt: '?' for help, default=3> 5
Set up users and passwords
--------------------------
You need to set a password for 'root', the system administrative account. A
malicious or unqualified user with root access can have disastrous results, so
you should take care to choose a root password that is not easy to guess. It
should not be a word found in dictionaries, or a word that could be easily
associated with you.
A good password will contain a mixture of letters, numbers and punctuation and
should be changed at regular intervals.
The root user should not have an empty password. If you leave this empty, the
root account will be disabled and the system's initial user account will be
given the power to become root using the "sudo" command.
Note that you will not be able to see the password as you type it.
Root password:
Please enter the same root password again to verify that you have typed it
correctly.
Re-enter password to verify:
A user account will be created for you to use instead of the root account for
non-administrative activities.
Please enter the real name of this user. This information will be used for
instance as default origin for emails sent by this user as well as any program
which displays or uses the user's real name. Your full name is a reasonable
choice.
Full name for the new user:
Prompt: '?' for help> User
Select a username for the new account. Your first name is a reasonable choice.
The username should start with a lower-case letter, which can be followed by
any combination of numbers and more lower-case letters.
Username for your account:
Prompt: '?' for help, default=user>
A good password will contain a mixture of letters, numbers and punctuation and
should be changed at regular intervals.
Choose a password for the new user:
[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:03 [32m]
[23B[0m
Please enter the same user password again to verify you have typed it
correctly.
Re-enter password to verify:
Setting up the clock
Detecting disks and all other hardware ... 95%... 100%
Loading additional components ... 16%... 33%... 50%... 66%... 83%... 100%
Loading additional components ... 25%... 50%... 75%... 100%
Starting up the partitioner ... 13%... 22%... 31%... 40%... 50%... 63%... 72%..
[23;80H.. 81%... 90%... 100%
Partition disks
---------------
The installer can guide you through partitioning a disk (using different
standard schemes) or, if you prefer, you can do it manually. With guided
partitioning you will still have a chance later to review and customise the
results.
If you choose guided partitioning for an entire disk, you will next be asked
which disk should be used.
Partitioning method:
1: Guided - use the largest continuous free space,
2: Guided - use entire disk,
3: Guided - use entire disk and set up LVM,
4: Guided - use entire disk and set up encrypted LVM,
5: Manual,
Prompt: '?' for help> 1 2
Note that all data on the disk you select will be erased, but not before you
have confirmed that you really want to make the changes.
Select disk to partition:
1: MMC/SD card #2 (mmcblk1) - 15.9 GB SD SL16G,
2: SCSI2 (0,0,0) (sda) - 4.2 GB Generic Flash Disk,
Prompt: '?' for help> 1
Guided partitioning ... 20%... 40%... 60%... 80%
This is an overview of your currently configured partitions and mount points.
Select a partition to modify its settings (file system, mount point, etc.), a
free space to create partitions, or a device to initialize its partition table.
1: Guided partitioning,
2: Configure software RAID,
3: Configure the Logical Volume Manager,
4: Configure encrypted volumes,
5: Configure iSCSI volumes,
6: ,
7: MMC/SD card #2 (mmcblk1) - 15.9 GB SD SL16G,
8: > #1 primary 254.8 MB B f ext2 /boot ,
9: > #2 primary 13.6 GB f ext4 / ,
10: > #5 logical 2.1 GB f swap swap ,
11: SCSI2 (0,0,0) (sda) - 4.2 GB Generic Flash Disk,
12: ,
13: Undo changes to partitions,
14: Finish partitioning and write changes to disk [*],
Prompt: '?' for help, default=14>
If you continue, the changes listed below will be written to the disks.
Otherwise, you will be able to make further changes manually.
WARNING: This will destroy all data on any partitions you have removed as well
as on the partitions that are going to be formatted.
The partition tables of the following devices are changed:
MMC/SD card #2 (mmcblk1)
The following partitions are going to be formatted:
partition #1 of MMC/SD card #2 (mmcblk1) as ext2
partition #2 of MMC/SD card #2 (mmcblk1) as ext4
partition #5 of MMC/SD card #2 (mmcblk1) as swap
Write the changes to disks?
1: Yes 2: No [*]
Prompt: '?' for help, default=2> 1[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:04 [32m][24;35H[0m
Partitions formatting ... 33%
Partitions formatting
Partitions formatting
Installing the base system ... 17%... 20%... 30%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:05 [32m][24;50H[0m[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:06 [32m][24;50H[0m... 40%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:07 [32m][24;57H[0m... 50%... 60%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:08 [32m][24;71H[0m... 70%...
[23;80H. 83%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:09 [32m][24;5H[0m[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:10 [32m][24;5H[0m... 91%... 100%
Configuring apt ... 11%... 22%... 33%
Configure the package manager
-----------------------------
No network mirror was selected.
If you are installing from a netinst CD and choose not to use a mirror, you
will end up with only a very minimal base system.
Continue without a network mirror?
1: Yes 2: No [*]
Prompt: '?' for help, default=2> [H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:11 [32m][24;34H[0m1
... 44%... 50%... 61%... 72%... 83%... 94%... 100%
Select and install software [H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:12 [32m][24;30H[0m... 10%... 20%... 30%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:13 [32m][24;51H[0m... 40%... 50%... 60%... 70%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:14 [32m][24;79H[0m..
[23;80H.. 80%... 90%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:15 [32m][24;13H[0m... 100%
Making the system bootable ... 33%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:16 [32m][24;36H[0m... 66%... 100%
Finishing the installation ... 12%... 20%... 33%[H[7m[m[32m[40m[ [37m[31m ([37m1*installer[31m)[37m 2 shell 3 shell 4- log [32m][[34m Jan 01 [37m 0:17 [32m][24;50H[0m... 41%
Finish the installation
-----------------------
Installation complete
Installation is complete, so it is time to boot into your new system. Make sure
to remove the installation media, so that you boot into the new system rather
than restarting the installation.
[Press enter to continue]
... 50%... 62%... 70%... 83%... 91%
The system is going down NOW!
Sent SIGKILL to all processes
Requesting system reboot
[ 1074.893325] reboot: Restarting system
Attachment:
cubox-boots-correctly.log
Description: Binary data