Bug#839595: flash-kernel: Please add support for SolidRun Clearfog
Package: flash-kernel
Version: 3.69
Severity: wishlist
Hi!
Please consider adding clearfog support. The system works fine with
mainline u-boot + kernel. Hopefully I have added all necessary
information below:
| Machine: SolidRun Clearfog A1
| Kernel-Flavors: armmp armmp-lpae
| DTB-Id: armada-388-clearfog.dtb
| Required-Packages: u-boot-tools
| # fw_printenv
| baudrate=115200
| bootargs=console=ttyS0,115200n8 rootdelay=10 bootwait=10 rootwait=10 root=/dev/mmcblk0p1
| bootcmd=ext4load mmc 0:2 0x100000 dtb ; ext4load mmc 0:2 0x800000 vmlinuz-4.7.0-1-armmp ; ext4load mmc 0:2 0x1800000 initrd.img-4.7.0-1-armmp.uimage ; bootz 0x800000 0x1800000 0x100000
| dnsip=10.100.3.2
| eth1addr=48:5b:39:c9:ec:74
| eth2addr=48:5b:39:c9:ec:75
| eth3addr=48:5b:39:c9:ec:76
| ethact=ethernet@30000
| ethprime=egiga1
| fdt_high=0x10000000
| fdtcontroladdr=3fb51e58
| fileaddr=100000
| filesize=4961
| gatewayip=10.100.3.1
| initrd_high=0x10000000
| ipaddr=10.100.3.3
| netmask=255.255.255.224
| serverip=10.100.3.2
| stderr=serial@12000
| stdin=serial@12000
| stdout=serial@12000
| bootdelay=5
| # cat /etc/fw_env.config
| /dev/mmcblk0 0xf0000 0x10000 0x1000
Regards
Christoph
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: armhf (armv7l)
Kernel: Linux 4.7.0-1-armmp (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages flash-kernel depends on:
ii debconf [debconf-2.0] 1.5.59
ii devio 1.2-1.2
ii initramfs-tools 0.125
ii linux-base 4.5
ii mtd-utils 1:1.5.2-1
ii ucf 3.0036
Versions of packages flash-kernel recommends:
ii u-boot-tools 2016.03+dfsg1-6
flash-kernel suggests no packages.
-- debconf information excluded
--
9FED 5C6C E206 B70A 5857 70CA 9655 22B9 D49A E731
Debian Developer | Lisp Hacker | CaCert Assurer
Reply to: