--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-reports: install a success, but there were misleading/noninformative navigation messages for text installer
- From: "Alan W. Irwin" <irwin@beluga.phys.uvic.ca>
- Date: Mon, 24 Sep 2012 13:46:40 -0700
- Message-id: <20120924204640.6894.56227.reportbug@meadowlark.mylan.home>
Package: installation-reports
Severity: minor
-- Package-specific info:
Boot method: usb stick
Image version: http://cdimage.debian.org/cdimage/wheezy_di_beta2/i386/iso-cd/debian-wheezy-DI-b2-i386-netinst.iso 2012-09-06
Date: <Date and time of the install> 2012-09-19
Machine: ASUS Eee box B202
Partitions: <df -Tl will do; the raw partition table is preferred>
I will give both:
Filesystem Type 1K-blocks Used Available Use% Mounted on
rootfs rootfs 20442028 3431792 15984856 18% /
udev devtmpfs 10240 0 10240 0% /dev
tmpfs tmpfs 206436 540 205896 1% /run
/dev/disk/by-uuid/e02c0c78-a3fb-4d63-ba55-253382e24e59 ext4 20442028 3431792 15984856 18% /
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 1199280 0 1199280 0% /run/shm
/dev/sda2 ext3 24029456 1246040 21562716 6% /home
/dev/sda1 ext3 28835836 1484980 25886076 6% /squeeze_root
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xcb5bd2b2
Device Boot Start End Blocks Id System
/dev/sda1 2048 58593279 29295616 83 Linux
/dev/sda2 58593280 107421404 24414062+ 83 Linux
/dev/sda3 148436992 156301311 3932160 82 Linux swap / Solaris
/dev/sda4 * 107421696 148436991 20507648 83 Linux
Partition table entries are not in disk order
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Description of the install:
I used the expert text install. This was an install where I attempted
to minimize what was installed by navigating (when the time came) into
the install tasks menu but excluding everything on tasksel's checklist
menu. Once this "minimum package" install was done, and the reboot
was succesful, then I continued on the normal command line with
apt-get install of X, KDE, etc., configuring as I went. That process
of adding packages is almost done now, and the system information
collected below presumably reflects that since I delayed sending in a
report until this command-line installation part of the install (which
has nothing to do with the installer) was almost done.
The initial minimum wheezy install did require resizing an existing
partition (mounted as /home for the previous Debian squeeze install)
without losing information. That was the first time I had ever tried
resizing with the aid of the Debian installer, and it was a success.
The result was I was able to preserve my previous squeeze install and
dual-boot from it. This dual-boot to squeeze could be useful in an
emergency, although so far I have only tested that dual-boot works,
and I haven't actually needed it for such an emergency.
Any thoughts, comments and ideas you had during the initial install:
My thoughts were the text install would have been quite simple for even
Debian newbies (which I am not) except for the misleading/noninformative
navigation messages mentioned in the above subject line:
Here are my notes (taken at the time) on those
misleading/noninformative navigation messages:
Start screen says "Press ENTER to boot or TAB to edit a menu entry"
That last verb is nonsensical. Why would you want to "edit" a menu
entry? I think what is meant here is navigate (as opposed to edit)
menus. However, I am not sure because the tab key did nothing! I
actually navigated to the advance options using the arrow key (not the
tab key) and then entered that menu with ENTER (contrary to the above
message which claims that will boot).
I then chose Expert install in that advanced menu, and for this case
RETURN does boot. But then in text mode there continues to be
misleading messages about navigation. For example, in the first
overall choice menu, it claims <TAB> moves <SPACE> selects, <ENTER>
activates buttons, but in fact for this screen <TAB> and <SPACE> do nothing,
arrow keys actually move from one menu item
to the next, and <ENTER> selects the item!
Later I did discover screens where <TAB> did actually make overall moves
(although the arrows and not the <space> bar were still needed
to navigate individual menus).
Anyhow, some attention to the navigation messages displayed for each
screen to make them appropriate for that screen would be a huge help
to newbies in my opinion.
Other misleading messages:
* "Detect and mount CD-ROM" is misleading when installing from a USB stick
(as I was). Even the actual successful detection message claimed my
USB stick was a CD-ROM. This overall menu item should read instead
something like "Detect and mount installation medium (CD-ROM, USB-stick, etc.)
* Same issue with "Load installer components from CD"
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="7.0 (wheezy) - installer build 20120828"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux meadowlark 3.2.0-3-486 #1 Mon Jul 23 02:47:49 UTC 2012 i686 GNU/Linux
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] (rev 03)
lspci -knn: Subsystem: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac]
lspci -knn: Kernel driver in use: agpgart-intel
lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1252]
lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1252]
lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:8331]
lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
lspci -knn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
lspci -knn: Kernel driver in use: ata_piix
lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:1347]
lspci -knn: 03:00.0 Network controller [0280]: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe [1814:0781]
lspci -knn: Subsystem: Ralink corp. Device [1814:2790]
lspci -knn: Kernel driver in use: rt2800pci
lspci -knn: 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:8168]
lspci -knn: Kernel driver in use: r8169
usb-list:
usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 3.2.0-3-486 ehci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 01 Device 04: USB2.0-CRW [0bda:0158]
usb-list: Level 01 Parent 01 Port 05 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer: Generic
usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver <none>
usb-list:
usb-list: Bus 02 Device 01: UHCI Host Controller [1d6b:0001]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 3.2.0-3-486 uhci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 02 Device 02: PS2 to USB Converter [0a81:0205]
usb-list: Level 01 Parent 01 Port 01 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer: CHESEN
usb-list: Interface 00: Class 03(HID ) Subclass 01 Protocol 01 Driver usbhid
usb-list: Interface 01: Class 03(HID ) Subclass 01 Protocol 02 Driver usbhid
usb-list:
usb-list: Bus 03 Device 01: UHCI Host Controller [1d6b:0001]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 3.2.0-3-486 uhci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 04 Device 01: UHCI Host Controller [1d6b:0001]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 3.2.0-3-486 uhci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 05 Device 01: UHCI Host Controller [1d6b:0001]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 3.2.0-3-486 uhci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
lsmod: Module Size Used by
lsmod: ufs 57656 0
lsmod: qnx4 12992 0
lsmod: ntfs 161713 0
lsmod: reiserfs 167376 0
lsmod: efivars 17508 0
lsmod: dm_mod 57354 0
lsmod: md_mod 81567 0
lsmod: xfs 511016 0
lsmod: jfs 131002 0
lsmod: ext4 298051 1
lsmod: crc16 12327 1 ext4
lsmod: jbd2 51542 1 ext4
lsmod: ext3 133836 2
lsmod: jbd 42496 1 ext3
lsmod: btrfs 471514 0
lsmod: zlib_deflate 21318 1 btrfs
lsmod: crc32c 12576 1
lsmod: libcrc32c 12394 1 btrfs
lsmod: ext2 49804 0
lsmod: mbcache 12897 3 ext2,ext3,ext4
lsmod: rt2800pci 13615 0
lsmod: rt2800lib 43217 1 rt2800pci
lsmod: rt2x00pci 12768 1 rt2800pci
lsmod: rt2x00lib 29158 3 rt2x00pci,rt2800lib,rt2800pci
lsmod: eeprom_93cx6 12423 1 rt2800pci
lsmod: crc_ccitt 12331 1 rt2800lib
lsmod: mac80211 167554 3 rt2x00lib,rt2x00pci,rt2800lib
lsmod: cfg80211 117608 2 mac80211,rt2x00lib
lsmod: rfkill 18715 1 cfg80211
lsmod: vfat 17117 0
lsmod: fat 40365 1 vfat
lsmod: arc4 12418 2
lsmod: r8169 41965 0
lsmod: mii 12595 1 r8169
lsmod: nls_utf8 12416 0
lsmod: isofs 30544 0
lsmod: usbhid 31673 0
lsmod: hid 60120 1 usbhid
lsmod: thermal 13103 0
lsmod: fan 12594 0
lsmod: thermal_sys 17752 2 fan,thermal
lsmod: usb_storage 35245 0
lsmod: sg 21589 0
lsmod: sd_mod 35425 5
lsmod: crc_t10dif 12332 1 sd_mod
lsmod: ata_generic 12439 0
lsmod: ata_piix 21296 4
lsmod: libata 121219 2 ata_piix,ata_generic
lsmod: uhci_hcd 22506 0
lsmod: ehci_hcd 35684 0
lsmod: scsi_mod 135629 4 libata,sd_mod,sg,usb_storage
lsmod: usbcore 100493 5 ehci_hcd,uhci_hcd,usb_storage,usbhid
lsmod: usb_common 12338 1 usbcore
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: none 206568 44 206524 0% /run
df: tmpfs 1032832 0 1032832 0% /dev
df: /dev/sda4 20442028 911148 18505500 5% /target
df: /dev/sda2 24029456 1008132 21800624 4% /target/home
df: /dev/sda1 28835836 1488480 25882576 5% /target/squeeze_root
df: /dev/sda4 20442028 911148 18505500 5% /dev/.static/dev
df: tmpfs 1032832 0 1032832 0% /target/dev
free: total used free shared buffers
free: Mem: 2065664 662236 1403428 0 65624
free: -/+ buffers: 596612 1469052
free: Swap: 3932156 0 3932156
/proc/cmdline: priority=low vga=788 initrd=/install.386/initrd.gz -- BOOT_IMAGE=/install.386/vmlinuz
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 28
/proc/cpuinfo: model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: microcode : 0x208
/proc/cpuinfo: cpu MHz : 1608.236
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 10
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm
/proc/cpuinfo: bogomips : 3216.47
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 32 bits physical, 32 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-0cf7 : PCI Bus 0000:00
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-0071 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:1f.2
/proc/ioports: 0170-0177 : ata_piix
/proc/ioports: 01f0-01f7 : 0000:00:1f.2
/proc/ioports: 01f0-01f7 : ata_piix
/proc/ioports: 025c-025f : pnp 00:07
/proc/ioports: 0290-0297 : pnp 00:06
/proc/ioports: 0376-0376 : 0000:00:1f.2
/proc/ioports: 0376-0376 : ata_piix
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : 0000:00:1f.2
/proc/ioports: 03f6-03f6 : ata_piix
/proc/ioports: 0400-041f : 0000:00:1f.3
/proc/ioports: 0480-04bf : pnp 00:07
/proc/ioports: 04d0-04d1 : pnp 00:07
/proc/ioports: 0800-087f : pnp 00:07
/proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK
/proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK
/proc/ioports: 0808-080b : ACPI PM_TMR
/proc/ioports: 0828-082f : ACPI GPE0_BLK
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 0d00-ffff : PCI Bus 0000:00
/proc/ioports: 1000-1fff : PCI Bus 0000:03
/proc/ioports: c000-cfff : PCI Bus 0000:01
/proc/ioports: d000-dfff : PCI Bus 0000:04
/proc/ioports: dc00-dcff : 0000:04:00.0
/proc/ioports: dc00-dcff : r8169
/proc/ioports: e480-e49f : 0000:00:1d.0
/proc/ioports: e480-e49f : uhci_hcd
/proc/ioports: e800-e81f : 0000:00:1d.1
/proc/ioports: e800-e81f : uhci_hcd
/proc/ioports: e880-e89f : 0000:00:1d.2
/proc/ioports: e880-e89f : uhci_hcd
/proc/ioports: ec00-ec1f : 0000:00:1d.3
/proc/ioports: ec00-ec1f : uhci_hcd
/proc/ioports: ec80-ec87 : 0000:00:02.0
/proc/ioports: ffa0-ffaf : 0000:00:1f.2
/proc/ioports: ffa0-ffaf : ata_piix
/proc/iomem: 00000000-0000ffff : reserved
/proc/iomem: 00010000-0009fbff : System RAM
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : PCI Bus 0000:00
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000d0000-000dffff : PCI Bus 0000:00
/proc/iomem: 000e0000-000fffff : reserved
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7f79ffff : System RAM
/proc/iomem: 01000000-012861eb : Kernel code
/proc/iomem: 012861ec-013ca77f : Kernel data
/proc/iomem: 0143b000-014b7fff : Kernel bss
/proc/iomem: 7f7a0000-7f7adfff : ACPI Tables
/proc/iomem: 7f7ae000-7f7effff : ACPI Non-volatile Storage
/proc/iomem: 7f7f0000-7f7fffff : reserved
/proc/iomem: 7f800000-ffffffff : PCI Bus 0000:00
/proc/iomem: 7f800000-7f9fffff : PCI Bus 0000:03
/proc/iomem: 8c000000-8c01ffff : pnp 00:07
/proc/iomem: bbe00000-bfdfffff : PCI Bus 0000:01
/proc/iomem: bfe00000-bfefffff : PCI Bus 0000:04
/proc/iomem: bfef0000-bfefffff : 0000:04:00.0
/proc/iomem: bfef0000-bfefffff : r8169
/proc/iomem: d0000000-dfffffff : 0000:00:02.0
/proc/iomem: d0000000-d07affff : vesafb
/proc/iomem: e0000000-e3ffffff : PCI MMCONFIG 0000 [bus 00-3f]
/proc/iomem: e0000000-e3ffffff : pnp 00:0a
/proc/iomem: fa700000-fe6fffff : PCI Bus 0000:01
/proc/iomem: fe700000-fe7fffff : PCI Bus 0000:03
/proc/iomem: fe7f0000-fe7fffff : 0000:03:00.0
/proc/iomem: fe7f0000-fe7fffff : 0000:03:00.0
/proc/iomem: fe800000-fe8fffff : PCI Bus 0000:04
/proc/iomem: fe8c0000-fe8dffff : 0000:04:00.0
/proc/iomem: fe8ff000-fe8fffff : 0000:04:00.0
/proc/iomem: fe8ff000-fe8fffff : r8169
/proc/iomem: fea80000-feafffff : 0000:00:02.1
/proc/iomem: feb38000-feb3bfff : 0000:00:1b.0
/proc/iomem: feb3fc00-feb3ffff : 0000:00:1d.7
/proc/iomem: feb3fc00-feb3ffff : ehci_hcd
/proc/iomem: feb40000-feb7ffff : 0000:00:02.0
/proc/iomem: feb80000-febfffff : 0000:00:02.0
/proc/iomem: fec00000-fec003ff : IOAPIC 0
/proc/iomem: fed00000-fed003ff : HPET 0
/proc/iomem: fed13000-fed19fff : pnp 00:01
/proc/iomem: fed1c000-fed1ffff : pnp 00:07
/proc/iomem: fed20000-fed3ffff : pnp 00:07
/proc/iomem: fed50000-fed8ffff : pnp 00:07
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: fee00000-fee00fff : pnp 00:09
/proc/iomem: ffb00000-ffbfffff : pnp 00:07
/proc/iomem: fff00000-ffffffff : reserved
/proc/iomem: fff00000-ffffffff : pnp 00:07
/proc/interrupts: CPU0
/proc/interrupts: 0: 11985 IO-APIC-edge timer
/proc/interrupts: 1: 3 IO-APIC-edge i8042
/proc/interrupts: 8: 24 IO-APIC-edge rtc0
/proc/interrupts: 9: 0 IO-APIC-fasteoi acpi
/proc/interrupts: 12: 3 IO-APIC-edge i8042
/proc/interrupts: 14: 85724 IO-APIC-edge ata_piix
/proc/interrupts: 15: 0 IO-APIC-edge ata_piix
/proc/interrupts: 16: 0 IO-APIC-fasteoi uhci_hcd:usb5
/proc/interrupts: 18: 0 IO-APIC-fasteoi uhci_hcd:usb4
/proc/interrupts: 19: 0 IO-APIC-fasteoi uhci_hcd:usb3
/proc/interrupts: 23: 18132 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
/proc/interrupts: 43: 45181 PCI-MSI-edge eth0
/proc/interrupts: NMI: 444 Non-maskable interrupts
/proc/interrupts: LOC: 246171 Local timer interrupts
/proc/interrupts: SPU: 0 Spurious interrupts
/proc/interrupts: PMI: 444 Performance monitoring interrupts
/proc/interrupts: IWI: 0 IRQ work interrupts
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 2065664 kB
/proc/meminfo: MemFree: 1403428 kB
/proc/meminfo: Buffers: 65624 kB
/proc/meminfo: Cached: 525572 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 296012 kB
/proc/meminfo: Inactive: 313776 kB
/proc/meminfo: Active(anon): 18604 kB
/proc/meminfo: Inactive(anon): 28 kB
/proc/meminfo: Active(file): 277408 kB
/proc/meminfo: Inactive(file): 313748 kB
/proc/meminfo: Unevictable: 0 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: HighTotal: 1179272 kB
/proc/meminfo: HighFree: 624992 kB
/proc/meminfo: LowTotal: 886392 kB
/proc/meminfo: LowFree: 778436 kB
/proc/meminfo: SwapTotal: 3932156 kB
/proc/meminfo: SwapFree: 3932156 kB
/proc/meminfo: Dirty: 928 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 18612 kB
/proc/meminfo: Mapped: 2252 kB
/proc/meminfo: Shmem: 44 kB
/proc/meminfo: Slab: 39144 kB
/proc/meminfo: SReclaimable: 31012 kB
/proc/meminfo: SUnreclaim: 8132 kB
/proc/meminfo: KernelStack: 488 kB
/proc/meminfo: PageTables: 356 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 4964988 kB
/proc/meminfo: Committed_AS: 24112 kB
/proc/meminfo: VmallocTotal: 122880 kB
/proc/meminfo: VmallocUsed: 12488 kB
/proc/meminfo: VmallocChunk: 109364 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 4096 kB
/proc/meminfo: DirectMap4k: 909304 kB
/proc/meminfo: DirectMap4M: 0 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=0a81 Product=0205 Version=0110
/proc/bus/input/devices: N: Name="CHESEN PS2 to USB Converter"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-2/input0
/proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=sysrq kbd
/proc/bus/input/devices: B: PROP=0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=10000 7 ff980000 7ff febeffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=0a81 Product=0205 Version=0110
/proc/bus/input/devices: N: Name="CHESEN PS2 to USB Converter"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-2/input1
/proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd mouse0
/proc/bus/input/devices: B: PROP=0
/proc/bus/input/devices: B: EV=17
/proc/bus/input/devices: B: KEY=400000 0 0 0 0 1f0000 0 2020000 7878 d811dc01 1e0000 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices:
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--- End Message ---
--- Begin Message ---
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> > * "Detect and mount CD-ROM" is misleading when installing from a USB stick
> > (as I was). Even the actual successful detection message claimed my
> > USB stick was a CD-ROM. This overall menu item should read instead
> > something like "Detect and mount installation medium (CD-ROM, USB-stick, etc.)
> >
> > * Same issue with "Load installer components from CD"
>
> It's a CD-ROM image, not a CD-ROM.
Your report is more than four years old, it has probably been acknowledged well enough,
thus I close it now.
You are right, the installer lives in a CD-image, but it's a hybrid ISO-image, that's
also bootable from USB-storage keys. If people dd'ed the image onto an USB-stick and use
it for installing, then they should normally be knowing what they do and should not be
mislead too much by the reference to the traditional original medium CD.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEARECAAYFAld47wEACgkQ5+rBHyUt5wvx7gCdE8pMH8om8sexdcnI+nXekALr
N6EAoMI2jp1UpxqT1yII1I30r94Bfj62
=Ew1a
-----END PGP SIGNATURE-----
--- End Message ---