[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#791794: marked as done (INSTALL REPORT (Jessie on QNAP TS-420U))

Your message dated Fri, 01 Jan 2016 21:32:08 +0000
with message-id <E1aF7Iu-0002BD-SA@franck.debian.org>
and subject line Bug#791794: fixed in flash-kernel 3.35+deb8u2
has caused the Debian Bug report #791794,
regarding INSTALL REPORT  (Jessie on QNAP TS-420U)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
791794: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=791794
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method:  network
Image version: http://ftp.debian.org/debian/dists/jessie/main/installer-armel/current/images/kirkwood/network-console/qnap/ts-41x/ 
Date:  June 7, 2015

Machine:  QNAP TS-420U
Processor:  Marvell 1.6 GHz
Memory:  1GB DDR3

Partitions:
Filesystem     Type     1K-blocks   Used Available Use% Mounted on
/dev/md0       ext4      19076820 986676  17098044   6% /
udev           devtmpfs     10240      0     10240   0% /dev
tmpfs          tmpfs       206704   4436    202268   3% /run
tmpfs          tmpfs       516752      0    516752   0% /dev/shm
tmpfs          tmpfs         5120      0      5120   0% /run/lock
tmpfs          tmpfs       516752      0    516752   0% /sys/fs/cgroup


Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) 
        Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
00:01.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:7042] (rev 02) 
        Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
        Kernel driver in use: sata_mv
01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) 
        Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
01:01.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) Subsystem: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] 
        Kernel driver in use: xhci_hcd


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [E]
Overall install:        [E]

Comments/Problems:
The problem seems to appear only when jessie is installed to RAID (e.g. RAID1)! 
Error message:
flash-kernel-installer does not find UUID (see the two lines of syslog below): in-target: UUID eeb34bbe-375a-4dc1-939d-f56b801a4c75 doesn't exist in /dev/disk/by-uuid in-target: Warning: root device /dev/disk/by-uuid/eeb34bbe-375a-4dc1-939d-f56b801a4c75 does not exist 
Quickfix:
When using the command 'udevadm trigger' before base-install the installer is able to install the boot loader and to finish the installation 
(compare http://forum.qnap.com/viewtopic.php?f=147&t=111076).
After reboot the new installed jessie is starting as expected.
Output of mdstat (cat /proc/mdstat):
  Used RAID1 for Debian installation:
  Personalities : [raid1]
  md0 : active raid1 sdc2[2] sdd2[3](S) sdb2[1] sda2[0]
        19514368 blocks super 1.2 [3/3] [UUU]
PROBLEM:
When I shutdown the system and remove any (active) harddisk (from RAID1) the system has problems to boot again. 
Error message (from bootlog at serial console)
  Gave up waiting for root device.  Common problems:
       - Boot args (cat /proc/cmdline)
         - Check rootdelay= (did the system wait long enough?)
         - Check root= (did the system wait for the right device?)
       - Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/61f390f9-c1db-4fbe-acd7-dd61bbcaeeca does not exist. Dropping to a shell! 
-----------
For comparision:
I've done the same kind of installation with oldstable (= wheezy) which is able to boot without problems even though two (out of three) active disks are missing. (see https://www.mail-archive.com/debian-bugs-dist%40lists.debian.org/msg1336095.html)

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


--- End Message ---
--- Begin Message --- 
Source: flash-kernel
Source-Version: 3.35+deb8u2

We believe that the bug you reported is fixed in the latest version of
flash-kernel, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 791794@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Cyril Brulebois <kibi@debian.org> (supplier of updated flash-kernel package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Sat, 05 Dec 2015 19:16:33 +0100
Source: flash-kernel
Binary: flash-kernel flash-kernel-installer
Architecture: source
Version: 3.35+deb8u2
Distribution: stable
Urgency: medium
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Cyril Brulebois <kibi@debian.org>
Description:
 flash-kernel - utility to make certain embedded devices bootable
 flash-kernel-installer - Make the system bootable (udeb)
Closes: 791794
Changes:
 flash-kernel (3.35+deb8u2) stable; urgency=medium
 .
   [ Ian Campbell ]
   * Avoid waiting for Ctrl-C if any debconf frontend is in use, not just
     non-interactive. (Closes: #791794)
Checksums-Sha1:
 5e10c7aa3df7b5a208ac60c5acd017f0b51649b7 1883 flash-kernel_3.35+deb8u2.dsc
 c4e410d876969b927867ce8a786da37899339067 56848 flash-kernel_3.35+deb8u2.tar.xz
Checksums-Sha256:
 d578f25289cbf5cdd46dd39d978def1565326dbf9a9503aa297a5f86a17cd93d 1883 flash-kernel_3.35+deb8u2.dsc
 7cedf60bcfbc5e7e4439b569a60a19fd189c0d30e56763b4d3fd0c2f6321ca68 56848 flash-kernel_3.35+deb8u2.tar.xz
Files:
 d66d59d15d6ab202485c1271318f2145 1883 utils optional flash-kernel_3.35+deb8u2.dsc
 a0d8836a9562b7bfbf0409fe0c0caa7a 56848 utils optional flash-kernel_3.35+deb8u2.tar.xz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=y57V
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: