Re: Trying to install Debian on an Asus VivoTab Smart ME400C
First of all thanks for your reply. I have tested your suggestions with
unfortunately little luck.
First of all I can confirm that the machine doesn't hang like I thought it
did, the kernel runs Ok, which is great, however I cannot access the machine
as I don't yet have any net or keyboard or any other access to it :-(
> The firmware appears to have set up the PCI root and ACPI tables
> wrongly:
>
> [...]
> > Dec 2 09:29:28 debian kernel: [ 0.115143] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> > Dec 2 09:29:28 debian kernel: [ 0.120549] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
> > Dec 2 09:29:28 debian kernel: [ 0.120555] PCI: not using MMCONFIG
> [...]
> > Dec 2 09:29:28 debian kernel: [ 0.139017] pci 0000:00:02.0: can't claim BAR 2 [mem 0xe0000000-0xefffffff]: no compatible bridge window
> [...]
> > I have some ideas of how to continue, installing a 4.3 kernel, maybe the 686
> > branch, not the 586 one,
>
> You should definitely use 686-pae on this processor, not 586. But
> that's not likely to change the behaviour.
Ok, I'm runing 686-pae 4.2 version from testing, however as you guessed
this doesn't change a thing.
> Some kernel parameters to try:
> pci=assign-busses
> pci=realloc
> or together:
> pci=assign-busses,realloc
I tried this all, it didn't make any difference, after diffing kernel.log
the only significative output differente was that:
> pci_bus 0000:00: max bus depth: 0 pci_try_num: 1
was added whenever realloc was used.
I also tried other options related to pci and bios, like earlydump, bios,
biosirq, ...
I didn't get any info from earlydump as expected, and asking to use bios
(this is uefi, and thus not bios) ended up with this diffs:
> PCI: System does not support PCI
> system 00:00: [mem 0xfec00000-0xfec00fff] has been reserved
I'm pasting the output from the 4.2 kernel just in case it can show anything
new, but I'm hoping to hear from new ideas as I really don't know how to go
on.
The machine does have Windows installed and it is working, so maybe some of
the info that the firmware doesn't provide can be obtained from it and
somehow inyected to Linux?
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-5) ) #1 SMP Debian 4.2.6-1 (2015-11-10)
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000017ffff] reserved
BIOS-e820: [mem 0x0000000000200000-0x00000000004fffff] reserved
BIOS-e820: [mem 0x0000000000500000-0x00000000005fffff] usable
BIOS-e820: [mem 0x0000000000600000-0x000000000101ffff] ACPI NVS
BIOS-e820: [mem 0x0000000001100000-0x0000000004adefff] usable
BIOS-e820: [mem 0x0000000004adf000-0x0000000005144fff] reserved
BIOS-e820: [mem 0x0000000005145000-0x0000000005168fff] ACPI data
BIOS-e820: [mem 0x0000000005169000-0x0000000006637fff] ACPI NVS
BIOS-e820: [mem 0x0000000006638000-0x0000000007d96fff] reserved
BIOS-e820: [mem 0x0000000007d97000-0x0000000007dd0fff] type 20
BIOS-e820: [mem 0x0000000007dd1000-0x000000007edfefff] usable
BIOS-e820: [mem 0x000000007edff000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000ff108000-0x00000000ff108fff] reserved
BIOS-e820: [mem 0x00000000ff11c000-0x00000000ff11dfff] reserved
BIOS-e820: [mem 0x00000000ff135000-0x00000000ff135fff] reserved
BIOS-e820: [mem 0x00000000ffa20000-0x00000000ffa2ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ESRT=0x7d96a10 ACPI=0x5168000 ACPI 2.0=0x5168014 SMBIOS=0x7d96810
esrt: Reserving ESRT space from 0x0000000007d96a10 to 0x0000000007d96a48.
SMBIOS 2.7 present.
DMI: ASUSTeK Computer INC. ME400C/ME400C, BIOS 0601 10/29/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7edff max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-EFFFF write-back
F0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask 080000000 write-back
1 base 07F000000 mask 0FF000000 uncachable
2 base 07EE00000 mask 0FFE00000 uncachable
3 base 07EDFF000 mask 0FFFFF000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
initial memory mapped: [mem 0x00000000-0x02dfffff]
Base memory trampoline at [c002c000] 2c000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37600000-0x377fffff]
[mem 0x37600000-0x377fffff] page 2M
init_memory_mapping: [mem 0x20000000-0x375fffff]
[mem 0x20000000-0x375fffff] page 2M
init_memory_mapping: [mem 0x00500000-0x005fffff]
[mem 0x00500000-0x005fffff] page 4k
init_memory_mapping: [mem 0x01100000-0x04adefff]
[mem 0x01100000-0x011fffff] page 4k
[mem 0x01200000-0x049fffff] page 2M
[mem 0x04a00000-0x04adefff] page 4k
init_memory_mapping: [mem 0x07dd1000-0x1fffffff]
[mem 0x07dd1000-0x07dfffff] page 4k
[mem 0x07e00000-0x1fffffff] page 2M
BRK [0x02858000, 0x02858fff] PGTABLE
init_memory_mapping: [mem 0x37800000-0x379fdfff]
[mem 0x37800000-0x379fdfff] page 4k
BRK [0x02859000, 0x02859fff] PGTABLE
BRK [0x0285a000, 0x0285bfff] PGTABLE
BRK [0x0285c000, 0x0285cfff] PGTABLE
BRK [0x0285d000, 0x0285dfff] PGTABLE
RAMDISK: [mem 0x36330000-0x3718ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000005168014 000024 (v02 _ASUS_)
ACPI: XSDT 0x0000000005168170 0000CC (v01 _ASUS_ LANFORDC 00000003 01000013)
ACPI: FACP 0x0000000005163000 0000F4 (v05 _ASUS_ LANFORDC 00000003 MSFT 0100000D)
ACPI: DSDT 0x0000000005154000 006122 (v01 _ASUS_ CLOVERVW 00000011 MSFT 04000000)
ACPI: CSRT 0x0000000005167000 00017C (v00 _ASUS_ LANFORDC 00000003 MSFT 0100000D)
ACPI: DBG2 0x0000000005165000 000072 (v00 _ASUS_ INTLDBGO 00000003 MSFT 0100000D)
ACPI: HPET 0x0000000005162000 000038 (v01 _ASUS_ LANFORDC 00000003 MSFT 0100000D)
ACPI: APIC 0x0000000005161000 000064 (v01 _ASUS_ LANFORDC 00000003 MSFT 0100000D)
ACPI: MCFG 0x0000000005160000 00003C (v01 _ASUS_ LANFORDC 00000001 MSFT 0100000D)
ACPI: MTMR 0x000000000515F000 00004C (v01 _ASUS_ LANFORDC 00000003 MSFT 0100000D)
ACPI: VRTC 0x000000000515E000 000034 (v01 _ASUS_ LANFORDC 00000003 MSFT 0100000D)
ACPI: SSDT 0x000000000515D000 0005B0 (v01 CpuDpf CpuDptf 00001000 MSFT 04000000)
ACPI: SSDT 0x000000000515C000 000D91 (v01 DptfTb DptfTab 00001000 MSFT 04000000)
ACPI: SSDT 0x000000000515B000 000058 (v01 LowPM LowPwrM 00001000 MSFT 04000000)
ACPI: SSDT 0x0000000005153000 00008D (v01 PmRef ApCst 00003000 MSFT 04000000)
ACPI: SSDT 0x0000000005152000 00017C (v01 PmRef ApIst 00003000 MSFT 04000000)
ACPI: SSDT 0x0000000005151000 000129 (v01 PmRef ApTst 00003000 MSFT 04000000)
ACPI: SSDT 0x0000000005150000 0001B2 (v01 PmRef Cpu0Cst 00003001 MSFT 04000000)
ACPI: SSDT 0x000000000514F000 000244 (v01 PmRef Cpu0Ist 00003000 MSFT 04000000)
ACPI: SSDT 0x000000000514E000 0000F4 (v01 PmRef Cpu0Tst 00003000 MSFT 04000000)
ACPI: FPDT 0x000000000514D000 000044 (v01 A M I ALASKA 01072009 AMI 00010013)
ACPI: BGRT 0x0000000005166000 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: TPM2 0x0000000005164000 000044 (v03 INTEL fTPM 00000001 MSFT 00000001)
ACPI: MSDM 0x000000000514C000 000055 (v03 _ASUS_ LANFORDC 00000003 01000013)
ACPI: Local APIC address 0xfee00000
1140MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x00000000379fdfff]
HighMem [mem 0x00000000379fe000-0x000000007edfefff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000500000-0x00000000005fffff]
node 0: [mem 0x0000000001100000-0x0000000004adefff]
node 0: [mem 0x0000000007dd1000-0x000000007edfefff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007edfefff]
On node 0 totalpages: 502699
free_area_init_node: node 0, pgdat c27037c0, node_mem_map f5154024
DMA zone: 36 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 414 pages, LIFO batch:0
Normal zone: 1967 pages used for memmap
Normal zone: 210444 pages, LIFO batch:31
HighMem zone: 291841 pages, LIFO batch:31
Using APIC driver default
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec10000, GSI 0-75
IOAPIC[1]: apic_id 4, version 32, address 0xfec00000, GSI 96-119
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x80862301 base: 0xff11a000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x00100000-0x0017ffff]
PM: Registered nosave memory: [mem 0x00180000-0x001fffff]
PM: Registered nosave memory: [mem 0x00200000-0x004fffff]
PM: Registered nosave memory: [mem 0x00600000-0x0101ffff]
PM: Registered nosave memory: [mem 0x01020000-0x010fffff]
PM: Registered nosave memory: [mem 0x04adf000-0x05144fff]
PM: Registered nosave memory: [mem 0x05145000-0x05168fff]
PM: Registered nosave memory: [mem 0x05169000-0x06637fff]
PM: Registered nosave memory: [mem 0x06638000-0x07d96fff]
PM: Registered nosave memory: [mem 0x07d97000-0x07dd0fff]
e820: [mem 0x80000000-0xff107fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 18 pages/cpu @f79aa000 s43468 r0 d30260 u73728
pcpu-alloc: s43468 r0 d30260 u73728 alloc=18*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 500696
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-686-pae root=UUID=83c7d420-1d52-43bd-92e0-ecd1e02f4e60 ro quiet
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:0007edff)
Initializing Movable for node 0 (00000000:00000000)
Memory: 1953892K/2010796K available (5099K kernel code, 639K rwdata, 1520K rodata, 684K init, 472K bss, 56904K reserved, 0K cma-reserve
virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc271a000 - 0xc27c5000 ( 684 kB)
.data : 0xc24fb11d - 0xc2718e40 (2167 kB)
.text : 0xc2000000 - 0xc24fb11d (5100 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
NR_IRQS:2304 nr_irqs:1024 0
CPU 0 irqstacks, hard=f4c2c000 soft=f4c2e000
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/linux-OXC8qP/linux-4.2.6/arch/x86/kernel/rtc.c:92 mach_get_cmos_time+0x189/0x1a0()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-1-686-pae #1 Debian 4.2.6-1
Hardware name: ASUSTeK Computer INC. ME400C/ME400C, BIOS 0601 10/29/2013
00000000 c267bf44 c24f41df 00000000 c20618b1 c25d5e80 00000000 00000000
c25c73ec 0000005c c20199f9 00000009 0000005c c20199f9 00000009 00200096
c267bf9c c267bf54 c2061982 00000009 00000000 c267bf8c c20199f9 c267bf98
Call Trace:
[<c24f41df>] ? dump_stack+0x3e/0x4e
[<c20618b1>] ? warn_slowpath_common+0x91/0xc0
[<c20199f9>] ? mach_get_cmos_time+0x189/0x1a0
[<c20199f9>] ? mach_get_cmos_time+0x189/0x1a0
[<c2061982>] ? warn_slowpath_null+0x22/0x30
[<c20199f9>] ? mach_get_cmos_time+0x189/0x1a0
[<c20abf76>] ? vprintk_emit+0x316/0x580
[<c2019a3e>] ? read_persistent_clock+0xe/0x10
[<c20c41f6>] ? read_persistent_clock64+0x16/0x30
[<c20ac357>] ? vprintk_default+0x37/0x40
[<c2735665>] ? timekeeping_init+0x10/0x1fc
[<c20be5ce>] ? hrtimer_cpu_notify+0xe/0x1d0
[<c24f3b8d>] ? printk+0x17/0x19
[<c24f5a98>] ? _cond_resched+0x8/0x30
[<c22a02f7>] ? find_next_bit+0x17/0x30
[<c271a98b>] ? start_kernel+0x24f/0x3b8
---[ end trace eef91fab9ab7adc1 ]---
Console: colour dummy device 80x25
console [tty0] enabled
Maximum core-clock to bus-clock ratio: 0x12
Resolved frequency ID: 5, frequency: 99840 KHz
TSC runs at 1797120 KHz
lapic_timer_frequency = 399360
tsc: Detected 1797.120 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3594.24 BogoMIPS (lpj=7188480)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 20K (c27c5000 - c27ca000)
ftrace: allocating 22159 entries in 44 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
smpboot: CPU0: Intel(R) Atom(TM) CPU Z2760 @ 1.80GHz (fam: 06, model: 35, stepping: 01)
Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f4d60000 soft=f4d62000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 2 irqstacks, hard=f4e14000 soft=f4e16000
#2
Initializing CPU#2
CPU 3 irqstacks, hard=f4e64000 soft=f4e66000
#3
Initializing CPU#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14376.96 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x00600000-0x0101ffff] (10616832 bytes)
PM: Registering ACPI NVS region [mem 0x05169000-0x06637fff] (21819392 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580)
ACPI: (supports S0)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
PCI: not using MMCONFIG
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [ID3C] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xff200000-0xff2fffff]
pci 0000:00:00.0: [8086:08c0] type 00 class 0x060000
pci 0000:00:02.0: [8086:08cf] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xff200000-0xff2fffff]
pci 0000:00:02.0: reg 0x14: [io 0x1000-0x1007]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 0x1c: [mem 0xdffc0000-0xdfffffff]
pci 0000:00:03.0: [8086:08d0] type 00 class 0x048000
pci 0000:00:03.0: reg 0x10: [mem 0x00000000-0x003fffff]
pci_bus 0000:00: on NUMA node 0
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
ioremap error for 0x7ce5000-0x7ce6000, requested 0x2, got 0x0
dmi: Firmware registration failed.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:02.0: can't claim BAR 2 [mem 0xe0000000-0xefffffff]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x04adf000-0x07ffffff]
e820: reserve RAM buffer [mem 0x7edff000-0x7ffdress 0001
mmcblk0: mmc0:0001 MCG8GA 58.2 GiB
mmcblk0boot0: mmc0:0001 MCG8GA partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 MCG8GA partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 MCG8GA partition 4 40.0 MiB
mmcblk0rpmb: mmc0:0001 MCG8GA partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5
mmc1: new high speed SD card at address 0003
mmcblk1: mmc1:0003 SD2GB 1.83 GiB
mmcblk1: p1 p2
sdhci-acpi INT33BB:01: no support for card's volts
mmc2: error -22 whilst initialising SDIO card
sdhci-acpi INT33BB:01: no support for card's volts
mmc2: error -22 whilst initialising SDIO card
sdhci-acpi INT33BB:01: no support for card's volts
mmc2: error -22 whilst initialising SDIO card
sdhci-acpi INT33BB:01: no support for card's volts
mmc2: error -22 whilst initialising SDIO card
EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.23)
ACPI: AC Adapter [ADP0] (off-line)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
wmi: Mapper loaded
tpm_crb MSFT0101:00: A TPM error (2314) occurred continue selftest
tpm_crb MSFT0101:00: Got RC_TESTING, ignoring
EFI Variables Facility v0.08 2004-May-17
input: PC Speaker as /devices/platform/pcspkr/input/input1
pstore: Registered efi as persistent store backend
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.7
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input2
asus_wmi: Number of fans: 1
EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
random: nonblocking pool is initialized
Initializing cgroup subsys cpuset
Again thanks in advance for your help.
--
Manty/BestiaTester -> http://manty.net
Reply to: