[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#791794: marked as done (INSTALL REPORT (Jessie on QNAP TS-420U))

Your message dated Sat, 07 Nov 2015 09:52:13 +0000
with message-id <E1Zv0AP-0005Y4-Jw@franck.debian.org>
and subject line Bug#791794: fixed in flash-kernel 3.48
has caused the Debian Bug report #791794,
regarding INSTALL REPORT  (Jessie on QNAP TS-420U)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
791794: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=791794
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method:  network
Image version: http://ftp.debian.org/debian/dists/jessie/main/installer-armel/current/images/kirkwood/network-console/qnap/ts-41x/ 
Date:  June 7, 2015

Machine:  QNAP TS-420U
Processor:  Marvell 1.6 GHz
Memory:  1GB DDR3

Partitions:
Filesystem     Type     1K-blocks   Used Available Use% Mounted on
/dev/md0       ext4      19076820 986676  17098044   6% /
udev           devtmpfs     10240      0     10240   0% /dev
tmpfs          tmpfs       206704   4436    202268   3% /run
tmpfs          tmpfs       516752      0    516752   0% /dev/shm
tmpfs          tmpfs         5120      0      5120   0% /run/lock
tmpfs          tmpfs       516752      0    516752   0% /sys/fs/cgroup


Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) 
        Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
00:01.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:7042] (rev 02) 
        Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
        Kernel driver in use: sata_mv
01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) 
        Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
01:01.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) Subsystem: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] 
        Kernel driver in use: xhci_hcd


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [E]
Overall install:        [E]

Comments/Problems:
The problem seems to appear only when jessie is installed to RAID (e.g. RAID1)! 
Error message:
flash-kernel-installer does not find UUID (see the two lines of syslog below): in-target: UUID eeb34bbe-375a-4dc1-939d-f56b801a4c75 doesn't exist in /dev/disk/by-uuid in-target: Warning: root device /dev/disk/by-uuid/eeb34bbe-375a-4dc1-939d-f56b801a4c75 does not exist 
Quickfix:
When using the command 'udevadm trigger' before base-install the installer is able to install the boot loader and to finish the installation 
(compare http://forum.qnap.com/viewtopic.php?f=147&t=111076).
After reboot the new installed jessie is starting as expected.
Output of mdstat (cat /proc/mdstat):
  Used RAID1 for Debian installation:
  Personalities : [raid1]
  md0 : active raid1 sdc2[2] sdd2[3](S) sdb2[1] sda2[0]
        19514368 blocks super 1.2 [3/3] [UUU]
PROBLEM:
When I shutdown the system and remove any (active) harddisk (from RAID1) the system has problems to boot again. 
Error message (from bootlog at serial console)
  Gave up waiting for root device.  Common problems:
       - Boot args (cat /proc/cmdline)
         - Check rootdelay= (did the system wait long enough?)
         - Check root= (did the system wait for the right device?)
       - Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/61f390f9-c1db-4fbe-acd7-dd61bbcaeeca does not exist. Dropping to a shell! 
-----------
For comparision:
I've done the same kind of installation with oldstable (= wheezy) which is able to boot without problems even though two (out of three) active disks are missing. (see https://www.mail-archive.com/debian-bugs-dist%40lists.debian.org/msg1336095.html)

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


--- End Message ---
--- Begin Message --- 
Source: flash-kernel
Source-Version: 3.48

We believe that the bug you reported is fixed in the latest version of
flash-kernel, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 791794@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Christian Perrier <bubulle@debian.org> (supplier of updated flash-kernel package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Sat, 07 Nov 2015 09:42:29 +0100
Source: flash-kernel
Binary: flash-kernel flash-kernel-installer
Architecture: source armel
Version: 3.48
Distribution: unstable
Urgency: medium
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Christian Perrier <bubulle@debian.org>
Description:
 flash-kernel - utility to make certain embedded devices bootable
 flash-kernel-installer - Make the system bootable (udeb)
Closes: 791794
Changes:
 flash-kernel (3.48) unstable; urgency=medium
 .
   [ Vagrant Cascadian ]
   * Update beaglebone, sunxi and u-boot generic boot scripts to support
     distro_bootpart variable added in u-boot mainline.
   * Update wandboard and cubox-i boot scripts to improve distro_bootcmd
     support.
 .
   [ Ian Campbell ]
   * Avoid waiting for Ctrl-C if any debconf frontend is in use, not just
     non-interactive. (Closes: #791794)
Checksums-Sha1:
 323128d3638353b35effbf100765a8b6149bdcbe 1853 flash-kernel_3.48.dsc
 d4f280c0f6837e4183a344cb1015b15044513533 63060 flash-kernel_3.48.tar.xz
 5580bfffd151d56c619c2fb537619c060604866b 23572 flash-kernel-installer_3.48_armel.udeb
 a848a1d2b0c4ab71b879b145acc57e888b575c4c 38902 flash-kernel_3.48_armel.deb
Checksums-Sha256:
 f46f7e3bae400e3fc3f5e885f90d9b8c4e77a218a4bddf8d53f682830667f396 1853 flash-kernel_3.48.dsc
 4b41ed2b2855ab9144149149526e9a8073625a700b63e2c4317d9c7dbaf7b193 63060 flash-kernel_3.48.tar.xz
 03b679e2d35b36a2a51b6759acb9a0ce40dd53a0e150a3bff8ac756d16b57b58 23572 flash-kernel-installer_3.48_armel.udeb
 861b24cb69cabc5b51e683d3b0d4f5142ad99b123df42b0b6065263b516c663f 38902 flash-kernel_3.48_armel.deb
Files:
 2884e54b3e4f235314114f3e1d38059e 1853 utils optional flash-kernel_3.48.dsc
 76bdca2155d94dee91ad812a078ad6c1 63060 utils optional flash-kernel_3.48.tar.xz
 8ab18ee19e3082cb1e28bcdd17cb30fb 23572 debian-installer standard flash-kernel-installer_3.48_armel.udeb
 7c3395c511f32cfe84972c41b55248ab 38902 utils optional flash-kernel_3.48_armel.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=zdk0
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: