[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#788782: marked as done (Need to add DTB settings for non-DTB Freescale MX53 LOCO Board too)

Your message dated Tue, 16 Jun 2015 17:23:08 +0000
with message-id <E1Z4uZo-0006Rf-KT@franck.debian.org>
and subject line Bug#788782: fixed in flash-kernel 3.43
has caused the Debian Bug report #788782,
regarding Need to add DTB settings for non-DTB Freescale MX53 LOCO Board too
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

788782: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=788782
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: flash-kernel
Version: 3.35
Severity: important

Looking at the settings for the two different stanzas for imx53,
they're quite different for no good reason that I can see:

Machine: Freescale i.MX53 Quick Start Board
Kernel-Flavors: armmp
DTB-Id: imx53-qsb.dtb
DTB-Append-From: 3.12
Boot-DTB-Path: /boot/dtb
U-Boot-Kernel-Address: 0x70008000
U-Boot-Initrd-Address: 0x0
Boot-Kernel-Path: /boot/uImage
Boot-Initrd-Path: /boot/uInitrd
Required-Packages: u-boot-tools
Bootloader-Sets-Incorrect-Root: no

Machine: Freescale MX53 LOCO Board
Kernel-Flavors: armmp mx5
U-Boot-Kernel-Address: 0x70008000
U-Boot-Initrd-Address: 0x0
Boot-Kernel-Path: /boot/uImage
Boot-Initrd-Path: /boot/uInitrd
Required-Packages: u-boot-tools

The second one is the settings that will be used when *running* on a
non-DTB kernel, even when installing a newer DTB-using kernel. This is
exactly the setup that will happen when upgrading a machine from
Wheezy to Jessie, for example, and will lead to machines not being
bootable after the upgrade!

The obvious fix is to clone the settings from the first stanza here to
the second. It's also worth checking any *other* supported machine
types for the same bug. This also *really* needs to be back-ported to

-- System Information:
Debian Release: 8.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

--- End Message ---
--- Begin Message ---
Source: flash-kernel
Source-Version: 3.43

We believe that the bug you reported is fixed in the latest version of
flash-kernel, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 788782@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
Christian Perrier <bubulle@debian.org> (supplier of updated flash-kernel package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)

Hash: SHA256

Format: 1.8
Date: Tue, 16 Jun 2015 06:56:47 +0200
Source: flash-kernel
Binary: flash-kernel flash-kernel-installer
Architecture: source armel
Version: 3.43
Distribution: unstable
Urgency: medium
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Christian Perrier <bubulle@debian.org>
 flash-kernel - utility to make certain embedded devices bootable
 flash-kernel-installer - Make the system bootable (udeb)
Closes: 788782
 flash-kernel (3.43) unstable; urgency=medium
   [ Ian Campbell ]
   * Combine i.MX53 QSB and LOCO board entries, they are the same thing and the
     LOCO variant was missing DTB information. (Closes: #788782)
 a1daec95a04a184e1783054ca059befad0652bbc 1858 flash-kernel_3.43.dsc
 b77ff3a9b7e95244fddf49440417236c1458a3d9 61256 flash-kernel_3.43.tar.xz
 9e4ee56f02d93c7c8c05e8429fb3c2ccce645032 22502 flash-kernel-installer_3.43_armel.udeb
 81e1270137ddf6e2efec06c0b46d91090b5fcdb4 36876 flash-kernel_3.43_armel.deb
 e43de26a0e4c43823faf455fe9f1f5f99fe4fad7144ae38b958d90dbd37c4da0 1858 flash-kernel_3.43.dsc
 1743c75163315302aaba1e7233bfb7ad91e7699fd9d8c4eda80d3a2cdee236b8 61256 flash-kernel_3.43.tar.xz
 29ded19170ba8059d5ac3ac77ed82f9607452e01d88aee639f82ce94c6242b64 22502 flash-kernel-installer_3.43_armel.udeb
 238d06ac5bc78d25baf3a8295c0556c282948b2afb84bc457292defd99e7354f 36876 flash-kernel_3.43_armel.deb
 6d4880aea9a6c69738082e64d93f49eb 1858 utils optional flash-kernel_3.43.dsc
 d07ffa582832711b82f0e3ffd515dc6a 61256 utils optional flash-kernel_3.43.tar.xz
 66a59de74de5daf29456405aa1a75596 22502 debian-installer standard flash-kernel-installer_3.43_armel.udeb
 b400acbdaea0142e96617fa41c9ef813 36876 utils optional flash-kernel_3.43_armel.deb

Version: GnuPG v1


--- End Message ---

Reply to: