Bug#782574: installation-reports: d-i does not boot on beaglebone black
On Thu, May 28, 2015 at 01:21:52AM +0200, François-Régis wrote:
> Le 27/05/2015 22:20, Lennart Sorensen a écrit :
> > On Wed, May 27, 2015 at 11:36:09AM -0700, Vagrant Cascadian wrote:
>
> > I am curious though: With the am3359-evmsk board I see no network traffic
> > with gigabit link and the 3.16 (or 4.0) kernel, but I do see traffic at
> > 100Mbit link speed. Does anyone with a beaglebone see the same behaviour?
> > Using the TI sdk kernel does work at gigabit speed, so the hardware
> > seems fine.
> >
>
> AFAIK beaglebone black has only 10/100 ethernet link [1] so it's hard to
> watch the same behaviour.
>
> [1]
> http://elinux.org/Beagleboard:BeagleBoneBlack#BeagleBone_Black_Features
Hmm, odd given I thought the CPU did gigabit.
Doing a check of the dtb files I see that yes the CPU can do gigabit,
but the phy used on the beaglebone boards is 100Mbit only, so the bug
could never affect them. So only the few boards with the Am335x that
have gigabit in use could see such a bug.
So not an issue really.
That's good.
--
Len Sorensen
Reply to: