[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#783278: marked as done (flash-kernel: Specifying Boot-Kernel-Image does nothing unless Dtb-Append, Machine-Id or U-Boot-Kernel-Address is also specified)

Your message dated Fri, 08 May 2015 19:48:47 +0000
with message-id <E1YqoGN-0006Dc-3k@franck.debian.org>
and subject line Bug#783278: fixed in flash-kernel 3.37
has caused the Debian Bug report #783278,
regarding flash-kernel: Specifying Boot-Kernel-Image does nothing unless Dtb-Append, Machine-Id or U-Boot-Kernel-Address is also specified
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
783278: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=783278
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: flash-kernel
Version: 3.35
Severity: normal

Dear Maintainer,


   * What led up to the situation?

trying to use flash-kernel with a Raspberry Pi.

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

Created a .db file with:

    Machine: BCM2708
    Boot-Kernel-Path: /boot/flash/kernel.img

Then ran flash-kernel

   * What was the outcome of this action?

flash-kernel should have copied the kernel, but instead did nothing and returned successfully.

   * What outcome did you expect instead?

The kernel at /boot/vmlinuz-<latest-version> should have been copied to /boot/flash/kernel.img



-- System Information:
Distributor ID:	ev3dev
Description:	ev3dev GNU/Linux testing (jessie)
Release:	testing
Codename:	jessie
Architecture: armv6l

Kernel: Linux 3.18.11-dlech+ (PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages flash-kernel depends on:
ii  debconf [debconf-2.0]  1.5.56
ii  devio                  1.2-1+b1
ii  initramfs-tools        0.120
ii  linux-base             3.5
ii  ucf                    3.0030

Versions of packages flash-kernel recommends:
ii  u-boot-tools  2014.10+dfsg1-5

flash-kernel suggests no packages.

-- Configuration Files:
/etc/flash-kernel/db changed:
Machine: Raspberry Pi


-- debconf information:
* flash-kernel/linux_cmdline:

--- End Message ---
--- Begin Message --- 
Source: flash-kernel
Source-Version: 3.37

We believe that the bug you reported is fixed in the latest version of
flash-kernel, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 783278@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Ian Campbell <ijc@debian.org> (supplier of updated flash-kernel package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Fri, 08 May 2015 19:24:06 +0100
Source: flash-kernel
Binary: flash-kernel flash-kernel-installer
Architecture: source
Version: 3.37
Distribution: unstable
Urgency: medium
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Ian Campbell <ijc@debian.org>
Description:
 flash-kernel - utility to make certain embedded devices bootable
 flash-kernel-installer - Make the system bootable (udeb)
Closes: 783278 783323
Changes:
 flash-kernel (3.37) unstable; urgency=medium
 .
   * Upload changes from 3.30~exp.1..3.36~exp.1 to unstable.
   * Improvements to support for PlatHome OpenBlocks AX3-4 board
     (Closes: #783323):
     - Allow armmp-lpae kernel flavour.
     - Remove Boot-Device option since this platform can boot from /boot.
   * Handle Boot-Kernel-Image even if none of Dtb-Append, Machine-Id or
     U-Boot-Kernel-Address are specified. Patch from David Lechner.
     (Closes: #783278)
   * Log some debug if either the kernel or the initrd is missing. Intended to
     help debug one aspect of #781742.
Checksums-Sha1:
 6bcd8464bb7976fecccb2a175de21ab76112cd62 1857 flash-kernel_3.37.dsc
 9b8bc13077dcffc9d08319504ead0c0145a92afe 59236 flash-kernel_3.37.tar.xz
Checksums-Sha256:
 83720e1c544ebda7e9f6d69a480194ac31e23f0bfb35826ca65ef0201f8c016c 1857 flash-kernel_3.37.dsc
 f803beb2e776e11b2bfa5480f66c3cb26c4b5ec427269d37468cdfff71b2dbb0 59236 flash-kernel_3.37.tar.xz
Files:
 743019305dea401daf1119fd3a9f5237 1857 utils optional flash-kernel_3.37.dsc
 f7f4459e4443442501a591e9f0dcc0f2 59236 utils optional flash-kernel_3.37.tar.xz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=s7P1
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: