Bug#782574: installation-reports: d-i does not boot on beaglebone black
Package: installation-reports
Severity: important
Tags: d-i
Dear Maintainer,
what I've done so far :
wget http://d-i.debian.org/daily-images/armhf/daily/netboot/SD-card-
images/partition.img.gz
wget http://d-i.debian.org/daily-images/armhf/daily/netboot/SD-card-
images/firmware.BeagleBoneBlack.img.gz
zcat firmware.BeagleBoneBlack.img.gz partition.img.gz > complet_image.img
dd if=complet_image.img of=/dev/mmcblk0
and boot on the bbb with that sd (I erased the internal emmc before)
Here is the console log :
U-Boot SPL 2014.10+dfsg1-5 (Apr 07 2015 - 22:13:27)
MMC: block number 0x100 exceeds max(0x0)
MMC: block number 0x200 exceeds max(0x0)
*** Error - No Valid Environment Area found
Using default environment
U-Boot 2014.10+dfsg1-5 (Apr 07 2015 - 22:13:27)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Invalid partition 2 **
** Invalid partition 2 **
** Invalid partition 2 **
** Invalid partition 2 **
** Invalid partition 2 **
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading /boot/boot.scr
1451 bytes read in 9 ms (157.2 KiB/s)
Running bootscript from mmc ...
## Executing script at 82000000
Non-mainline u-boot or old-style mainline u-boot detected.
This boot script uses the unified bootcmd handling of mainline
u-boot >=v2014.10, which is not available on your system.
Please boot the installer manually.
switch to partitions #0, OK
mmc1(part 0) is current device
SD/MMC found on device 1
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
switch to partitions #0, OK
mmc1(part 0) is current device
SD/MMC found on device 1
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
** No partition table - mmc 1 **
## Error: "nandboot" not defined
U-Boot#
Thanks
-- Package-specific info:
Boot method: sd-card
Image version: http://d-i.debian.org/daily-images/armhf/daily/netboot/SD-card-images/
Date: <Date and time of the install>
Machine: Beaglebone black
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ ]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386, armel, armhf, powerpcspe
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Reply to: