Vagrant Cascadian <vagrant@debian.org> (2014-12-17): > Package: installation-reports > Severity: normal > > Install worked with serial console, though failed to bring up a serial > console on first boot. USB doesn't work, probably due to DMA issues > with MUSB on multiplatform kernels. > > > -- Package-specific info: > > Boot method: netboot > Image version: http://d-i.debian.org/daily-images/armhf/20141217-05:33/netboot/ > Date: 20141217 > > Machine: BeagleBone Black > > Base System Installation Checklist: > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Initial boot: [O] > Detect network card: [O] > Configure network: [O] > Detect CD: [ ] > Load installer modules: [O] > Clock/timezone setup: [O] > User/password setup: [O] > Detect hard drives: [O] > Partition hard drives: [O] > Install base system: [O] > Install tasks: [O] > Install boot loader: [ ] > Overall install: [O] > > Comments/Problems: > > USB is mostly broken. HDMI video works. On-board eMMC (2GB) used for > install, and inserted microSD card was detected correctly. Ethernet > works. > > Serial console works, with a caveat: > > The boot.scr generated by flash-kernel scripts for the beagleboneblack > didn't include the console= argument, so on first boot, systemd did > not start a getty on the serial console. I had to manually add > console=ttyO0,115200n8 to "bootargs" from the u-boot shell before > booting. And then added to /etc/default/flash-kernel to ensure it > would work on subsequent boots. Likely the -- vs. --- thing striking again? Mraw, KiBi.
Attachment:
signature.asc
Description: Digital signature