Bug#762590: Installation Report: linux-amd64 (daily) mostly OK
Package: installation-reports
Boot method: netboot
Image version: linux-amd64 daily build as of 2014-09-22 from
http://d-i.debian.org/daily-images/amd64/daily/netboot/debian-installer/amd64/
Date: 2014-09-22 21:30
Machine: noname
Processor: Athlon64 X2
Memory: 3GByte
Partitions:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000919f8
Device Boot Start End Blocks Id System
/dev/sda1 63 5863724 2931831 82 Linux swap / Solaris
/dev/sda2 5863725 103521928 48829102 a5 FreeBSD
/dev/sda3 * 103522860 144541695 20509418 7 HPFS/NTFS/exFAT
/dev/sda4 201182056 488396799 143607372 f W95 Ext'd (LBA)
/dev/sda5 201182058 214853309 6835626 83 Linux
/dev/sda6 214853373 299676509 42411568+ 7 HPFS/NTFS/exFAT
/dev/sda7 299676573 462176255 81249841+ 83 Linux
/dev/sda8 462178304 488396799 13109248 83 Linux
Output of lspci -knn (or lspci -nn):
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP67 Memory Controller [10de:0547] (rev a2)
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP67 ISA Bridge [10de:0548] (rev a2)
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP67 SMBus [10de:0542] (rev a2)
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP67 Memory Controller [10de:0541] (rev a2)
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2)
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2)
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2)
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2)
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP67 IDE Controller [10de:0560] (rev a1)
00:07.0 Audio device [0403]: NVIDIA Corporation MCP67 High Definition Audio [10de:055c] (rev a1)
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Bridge [10de:0561] (rev a2)
00:09.0 SATA controller [0106]: NVIDIA Corporation MCP67 AHCI Controller [10de:0554] (rev a2)
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0562] (rev a2)
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:0f.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:11.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2)
00:12.0 VGA compatible controller [0300]: NVIDIA Corporation C68 [GeForce 7025 / nForce 630a] [10de:053e] (rev a2)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O] only minimal system
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
Overall installation of the minimal system was perfect except the
grub installation ignored the kFreeBSD installed on the same disk.
Also, after booting into the installed system, update-grub did not
recognize the BSD system.
I fixed this manually, mounting the ufs2 file system and copying the
relevant parts of the grub.cfg on the BSD system into linux' 40_custom
and running update-grub again. This way, I was able to boot into kFreeBSD.
Regards,
Herbert
--
Herbert Kaminski D-26122 Oldenburg
Reply to: