[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#760215: marked as done (flash-kernel does not hint how to fix an oversized initramfs)

Your message dated Sat, 06 Sep 2014 09:50:46 +0000
with message-id <E1XQCdq-0002Ic-FN@franck.debian.org>
and subject line Bug#760215: fixed in flash-kernel 3.25
has caused the Debian Bug report #760215,
regarding flash-kernel does not hint how to fix an oversized initramfs
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
760215: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=760215
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 3.14.15-2
Severity: grave
Justification: renders package unusable

Dear Maintainer,

   * What led up to the situation?
   
     Upgrading the package linux-image-kirkwood that depends on this one.
     
   * What exactly did you do (or not do) that was effective (or
     ineffective)?

     dpkg-reconfigure the package reproduces the error.

   * What was the outcome of this action?

     The following error messages:

       Processing triggers for flash-kernel (3.21) ...
       flash-kernel: installing version 3.14-2-kirkwood
       Not enough space in MTD RootFS1 (need 9768399 but is actually 9437184).
       dpkg: error processing package flash-kernel (--configure):
        el subproceso instalado el script post-installation devolvió el código de salida de error 1
       Se encontraron errores al procesar:
        flash-kernel

   * What outcome did you expect instead?

     Proper installation of the package.


-- Package-specific info:
This kernel could not be booted because it can't get installed.

** Model information
Hardware	: QNAP TS-41x
Revision	: 0000

** PCI devices:
00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. 88F6281 [Kirkwood] ARM SoC [11ab:6281] (rev 02)
	Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at <ignored> (64-bit, prefetchable)
	Capabilities: <access denied>

00:01.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:7042] (rev 02)
	Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=1M]
	Region 2: I/O ports at 1000 [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sata_mv


** USB devices:
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: armel (armv5tel)

Kernel: Linux 3.9-1-kirkwood
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.14-2-kirkwood depends on:
ii  debconf [debconf-2.0]                   1.5.53
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    17-2
ii  linux-base                              3.5
ii  module-init-tools                       17-2

Versions of packages linux-image-3.14-2-kirkwood recommends:
ii  firmware-linux-free  3.3
ii  uboot-mkimage        2012.04.01-2

Versions of packages linux-image-3.14-2-kirkwood suggests:
pn  debian-kernel-handbook  <none>
pn  fdutils                 <none>
pn  linux-doc-3.14          <none>

Versions of packages linux-image-3.14-2-kirkwood is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.14-2-kirkwood/postinst/depmod-error-initrd-3.14-2-kirkwood: false
  linux-image-3.14-2-kirkwood/postinst/mips-initrd-3.14-2-kirkwood:
  linux-image-3.14-2-kirkwood/prerm/removing-running-kernel-3.14-2-kirkwood: true

--- End Message ---
--- Begin Message --- 
Source: flash-kernel
Source-Version: 3.25

We believe that the bug you reported is fixed in the latest version of
flash-kernel, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 760215@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Ian Campbell <ijc@debian.org> (supplier of updated flash-kernel package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Sat, 06 Sep 2014 09:38:44 +0100
Source: flash-kernel
Binary: flash-kernel flash-kernel-installer
Architecture: source
Version: 3.25
Distribution: unstable
Urgency: medium
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Ian Campbell <ijc@debian.org>
Description:
 flash-kernel - utility to make certain embedded devices bootable
 flash-kernel-installer - Make the system bootable (udeb)
Closes: 760215
Changes:
 flash-kernel (3.25) unstable; urgency=medium
 .
   * Log some clues on how to fix overly large initramfs (Closes: #760215).
   * Improved mtd partition size checks.
   * Switch Uploaders to use my @debian.org address.
Checksums-Sha1:
 a291109e107f82fc887576de6a46de0820143b7a 1857 flash-kernel_3.25.dsc
 22817d6aca8a788f1d7bce856e6f59bb0b2f84ac 55064 flash-kernel_3.25.tar.xz
Checksums-Sha256:
 c427a3ced7afb612e74d334d1005d462c0ec194e8789fec284e7495c645c1437 1857 flash-kernel_3.25.dsc
 82a83beead58f1038cff4fee61d171f94a038cc42da5e488eb1582b61c631c34 55064 flash-kernel_3.25.tar.xz
Files:
 bc2883200a1f1444375e9237c85e74a4 1857 utils optional flash-kernel_3.25.dsc
 66793d7319d85efdc936c6dc69e2282f 55064 utils optional flash-kernel_3.25.tar.xz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=7Drg
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: