[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#247593: marked as done ("Lilo wants to make partition active even if installed in MBR")

Your message dated Tue, 18 Mar 2014 01:04:04 +0100
with message-id <20140318000404.GB21960@mraw.org>
and subject line Re: Bug#247593: .
has caused the Debian Bug report #247593,
regarding "Lilo wants to make partition active even if installed in MBR"
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
247593: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=247593
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

INSTALL REPORT

Debian-installer-version: Beta4
uname -a: Linux enrico 2.6.3-1-386 #2 Tue Feb 24 20:20:23 EST 2004 i686 GNU/Linux
Date: Tue May  4 14:03:30 CEST 2004
Method: Netinst CD

Machine: HP Proliant ML350
Processor: Intel Xeon 
Memory: 4GB
Root Device: /dev/cciss/disc0/part1
Root Size/partition table: 
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/cciss/c0d1p8 none            swap    sw              0       0
/dev/cciss/c0d0p5 /home/students  ext3    defaults        0       2
/dev/cciss/c0d0p6 /home/staff     ext3    defaults        0       2
/dev/cciss/c0d0p7 /srv            ext3    defaults        0       2
/dev/cciss/c0d1p1 /               ext3    defaults,errors=remount-ro 0       1
/dev/cciss/c0d1p5 /var            ext3    defaults        0       2
/dev/cciss/c0d1p6 /home           ext3    defaults        0       2
/dev/cciss/c0d1p7 /usr/local      ext3    defaults        0       2
/dev/hda        /media/cdrom    iso9660 ro,user,noauto  0       0
/dev/fd0        /media/floppy   auto    rw,user,noauto  0       0
/dev/hda        /cdrom          iso9660 ro,user,noauto  0       0

Output of lspci and lspci -n:

lspci:
0000:00:00.0 Host bridge: ServerWorks CNB20-HE Host Bridge (rev 32)
0000:00:00.1 Host bridge: ServerWorks CNB20-HE Host Bridge
0000:00:00.2 Host bridge: ServerWorks CNB20-HE Host Bridge
0000:00:02.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
0000:00:02.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702 Gigabit Ethernet (rev 02)
0000:00:05.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller
0000:00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05)
0000:00:0f.3 Host bridge: ServerWorks GCLE Host Bridge
0000:00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
0000:00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
0000:02:02.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01)

lspci -n:
0000:00:00.0 Class 0600: 1166:0014 (rev 32)
0000:00:00.1 Class 0600: 1166:0014
0000:00:00.2 Class 0600: 1166:0014
0000:00:02.0 Class 0100: 9005:00c0 (rev 01)
0000:00:02.1 Class 0100: 9005:00c0 (rev 01)
0000:00:03.0 Class 0300: 1002:4752 (rev 27)
0000:00:04.0 Class 0200: 14e4:16a6 (rev 02)
0000:00:05.0 Class 0880: 0e11:a0f0
0000:00:0f.0 Class 0601: 1166:0201 (rev 93)
0000:00:0f.1 Class 0101: 1166:0212 (rev 93)
0000:00:0f.2 Class 0c03: 1166:0220 (rev 05)
0000:00:0f.3 Class 0600: 1166:0225
0000:00:11.0 Class 0600: 1166:0101 (rev 05)
0000:00:11.2 Class 0600: 1166:0101 (rev 05)
0000:02:02.0 Class 0104: 0e11:0046 (rev 01)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [E]
Reboot:                 [E]

Comments/Problems:

I've done the installation in expert mode
Problems installing boot loader:

I choose to install lilo on the master boot record and it asked me

"Would you like to make this partition active?" 

The default was "Yes". It seemed quite a strange question, but I sticked with
the default, and it told me it had failed. Repeting lilo installation and 
changing the answer to "no" worked. Anyway I think that lilo shouldn't ask 
that question if installing on the mbr.

Reboot problems:

Rebooting hotplug tried to load the drivers for my hardware: this resulted
in a kernel panic while trying aic79xx. I had to manually disable hotplug 
to make the system work...

--- End Message ---
--- Begin Message --- 
Guido Trotter <ultrotter@debian.org> (2014-03-18):
> I really haven't used LILO for quite a while, sorry! :)

I wouldn't be sorry. ;)

Thanks for the quick follow-up, closing accordingly.

Mraw,
KiBi.

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: