Package: installation-reports
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/wheezy_di_rc1/amd64/iso-cd/debian-wheezy-DI-rc1-amd64-netinst.iso
Date: 22. Feb. 2013
Machine: <Acer Aspire M3920 CI5/6/1000>
Processor: Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz
Memory: 6042MB DRAM
Partitions:
/dev/sda1 40795 40808 102400 7 HPFS/NTFS
/dev/sda2 * 40808 81602 327680000 7 HPFS/NTFS
/dev/sda3 81602 121602 321299456 7 HPFS/NTFS
/dev/sda4 1 40795 327678977 5 Extended
Partition 4 does not start on physical sector boundary.
/dev/sda5 1 39697 318860288 83 Linux
/dev/sda6 39697 40795 8817664 82 Linux swap / Solaris
Output of lspci -knn
(or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DRAM Controller [8086:0100] (rev 09)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0102] (rev 09)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
Kernel driver in use: ehci_hcd
00:1b.0 Audio
device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 3 [8086:1c14] (rev b4)
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Cougar Point LPC Controller [8086:1c4a] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID Controller [8086:2822] (rev 04)
Subsystem: Acer
Incorporated [ALI] Device [1025:0491]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 04)
Subsystem: Acer Incorporated [ALI] Device [1025:0491]
Kernel driver in use: i801_smbus
02:00.0 SATA controller [0106]: Device [1b21:0612] (rev 01)
Subsystem: Device [1b21:1060]
Kernel driver in use: ahci
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [O]
Load installer modules: [E]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [E]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [E]
Install boot loader: [ ]
Overall install: [E]
Problems: ATA bus error
There occurs an error
while installing the image named at the top on my computer. At first the initial menu to select between
the way of installing(graphical or not) etc. is shown. Selecting one of these ways to install leeds to the following error-message:
ata8.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0xe frozen
ata8: SERROR: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BudCRC Handshk LinkSeq TrStaTrns UnrecFIS DevExch}
ata8.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error)
ata8.00:status:{DRDY}
The lspci-information at the top is extracted from my stable squeeze-version. Updating my current version works, but I would prefer a clean new installation
so I don't have to deal with many dependency-problems I'm getting into.
Here some additional information extracted from dmesg-output about
ehci, ata, busses and CD-ROM:
[ 0.962347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.970192] libata version 3.00 loaded.
[ 1.220781] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) f8:0f:41:08:4e:04
[ 1.220783] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.220817] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.220835] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.220860] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.220863] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.220876] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.220907] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.224798] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 1.224812] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe527000
[ 1.240028] ehci_hcd 0000:00:1a.0:
USB 2.0 started, EHCI 1.00
[ 1.240048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240051] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240054] usb usb1: Product: EHCI Host Controller
[ 1.240056] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.240058] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.240122] usb usb1: configuration #1 chosen from 1 choice
[ 1.240141] hub 1-0:1.0: USB hub found
[ 1.240145] hub 1-0:1.0: 2 ports detected
[ 1.240175] ahci 0000:00:1f.2: version 3.0
[ 1.240186] alloc irq_desc for 19 on node -1
[ 1.240187] alloc kstat_irqs on node -1
[ 1.240192] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.240223] alloc irq_desc for 27 on node -1
[ 1.240224] alloc kstat_irqs on node -1
[ 1.240232] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.240242] ahci 0000:00:1f.2:
controller can't do SNTF, turning off CAP_SNTF
[ 1.240276] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl RAID mode
[ 1.240279] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.240283] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.240332] scsi0 : ahci
[ 1.240391] scsi1 : ahci
[ 1.240424] scsi2 : ahci
[ 1.240457] scsi3 : ahci
[ 1.240490] scsi4 : ahci
[ 1.240523] scsi5 : ahci
[ 1.240632] ata1: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525100 irq 27
[ 1.240634] ata2: DUMMY
[ 1.240634] ata3: DUMMY
[ 1.240635] ata4: DUMMY
[ 1.240636] ata5: DUMMY
[ 1.240637] ata6: DUMMY
[ 1.240657] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.240662] ahci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.240669] ehci_hcd 0000:00:1d.0: setting latency timer to
64
[ 1.240674] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.240680] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.240700] alloc irq_desc for 28 on node -1
[ 1.240701] alloc kstat_irqs on node -1
[ 1.240718] ahci 0000:02:00.0: irq 28 for MSI/MSI-X
[ 1.240721] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.240744] ahci: SSS flag set, parallel bus scan disabled
[ 1.240794] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.240796] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 1.240802] ahci 0000:02:00.0: setting latency timer to 64
[ 1.240892] scsi6 : ahci
[ 1.240932] scsi7 : ahci
[ 1.240959] ata7: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 28
[ 1.240963] ata8: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 28
[ 1.244606] ehci_hcd
0000:00:1d.0: cache line size of 32 is not supported
[ 1.244617] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe526000
[ 1.259994] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.260012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.260015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260018] usb usb2: Product: EHCI Host Controller
[ 1.260020] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.260022] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.260081] usb usb2: configuration #1 chosen from 1 choice
[ 1.260102] hub 2-0:1.0: USB hub found
[ 1.260105] hub 2-0:1.0: 2 ports detected
[ 1.465917] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.467423] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.467974] ata1.00: ATA-8: WDC WD10EARS-22Y5B1, 80.00A80, max UDMA/133
[ 1.467977] ata1.00: 1953525168 sectors, multi
16: LBA48 NCQ (depth 31/32), AA
[ 1.469902] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.470169] ata1.00: configured for UDMA/133
[ 1.485971] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-22Y 80.0 PQ: 0 ANSI: 5
[ 1.602049] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.602052] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.602116] usb 1-1: configuration #1 chosen from 1 choice
[ 1.602207] hub 1-1:1.0: USB hub found
[ 1.602297] hub 1-1:1.0: 6 ports detected
[ 1.717519] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.849677] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.849680] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.849743] usb 2-1: configuration #1 chosen from 1 choice
[ 1.849823] hub 2-1:1.0: USB hub found
[ 1.849925] hub 2-1:1.0:
8 ports detected
[ 1.925322] usb 1-1.6: new low speed USB device using ehci_hcd and address 3
[ 2.027915] usb 1-1.6: New USB device found, idVendor=045e, idProduct=0084
[ 2.027918] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.027920] usb 1-1.6: Product: Basic Optical Mouse
[ 2.027922] usb 1-1.6: Manufacturer: Microsoft
[ 2.027981] usb 1-1.6: configuration #1 chosen from 1 choice
[ 2.125024] usb 2-1.2: new high speed USB device using ehci_hcd and address 3
[ 2.372510] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.374992] ata8.00: ATAPI: ATAPI DVD A DH16ABSH, YA12, max UDMA/100
[ 2.375856] ata8.00: configured for UDMA/100
[ 2.377764] scsi 7:0:0:0: CD-ROM ATAPI DVD A DH16ABSH YA12 PQ: 0 ANSI: 5
[ 2.381239] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.381241] sd 0:0:0:0: [sda] 4096-byte
physical blocks
[ 2.381330] sd 0:0:0:0: [sda] Write Protect is off
[ 2.381332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.381350] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.381450] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.388710] Uniform CD-ROM driver Revision: 3.20
[ 2.388788] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.398266] sda1 sda2 sda3 sda4 < sda5
[ 2.407345] usb 2-1.2: New USB device found, idVendor=1307, idProduct=0330
[ 2.407348] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.407351] usb 2-1.2: Product: Mass Storage Device
[ 2.407353] usb 2-1.2: Manufacturer: Generic
[ 2.407355] usb 2-1.2: SerialNumber: 00000000000006
[ 2.407418] usb 2-1.2: configuration #1 chosen from 1 choice
[ 2.410924] Initializing USB Mass Storage driver...
[
2.410980] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2.411020] usb-storage: device found at 3
[ 2.411021] usb-storage: waiting for device to settle before scanning
[ 2.411029] usbcore: registered new interface driver usb-storage
[ 2.411030] USB Mass Storage support registered.
[ 2.418797] sda6 >
[ 2.419047] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.420937] usbcore: registered new interface driver hiddev
[ 2.421937] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.421955] sr 7:0:0:0: Attached scsi generic sg1 type 5
[ 2.424272] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2
[ 2.424308] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-1.6/input0
[ 2.424319] usbcore: registered new interface driver usbhid
[ 2.424321] usbhid: v2.6:USB
HID core driver
[ 2.477501] usb 2-1.3: new high speed USB device using ehci_hcd and address 4
[ 2.575720] usb 2-1.3: New USB device found, idVendor=0bda, idProduct=8187
[ 2.575724] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.575727] usb 2-1.3: Product: RTL8187_Wireless_LAN_Adapter
[ 2.575729] usb 2-1.3: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 2.575732] usb 2-1.3: SerialNumber: 0018E70DC0B3
[ 2.575798] usb 2-1.3: configuration #1 chosen from 1 choice
If you need more information, just ask.
|