Package: installation-reports
Boot method: DVD
Image version: debian-live-7.0.0-i386-xfce-desktop.iso
http://cdimage.debian.org/cdimage/archive/7.0.0/i386/iso-dvd/
Date: 2013.10.09 13:05
Machine: GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard
Processor: Intel Pentium E5400 Wolfdale 2.7GHz 2MB L2 Cache LGA 775 65W
Dual-Core Processor
Memory: Crucial 2GB 240-Pin DDR2 SDRAM DDR2 667
Partitions: output of "fdisk -l":
Disk /dev/sda: 320.1 GB, 320071851520 bytes
240 heads, 63 sectors/track, 41345 cylinders, total 625140335 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000edb2d
Device Boot Start End Blocks Id System
/dev/sda1 2048 16291839 8144896 83 Linux
/dev/sda2 * 16299360 86289839 34995240 7 HPFS/NTFS/exFAT
/dev/sda3 86289840 156250079 34980120 7 HPFS/NTFS/exFAT
/dev/sda4 156266301 625139711 234436705+ 5 Extended
/dev/sda5 156266303 281282084 62507891 7 HPFS/NTFS/exFAT
/dev/sda6 281284133 406299914 62507891 7 HPFS/NTFS/exFAT
/dev/sda7 406301963 531317744 62507891 7 HPFS/NTFS/exFAT
/dev/sda8 531320832 576274431 22476800 83 Linux
/dev/sda9 576276480 592562175 8142848 83 Linux
/dev/sda10 592564224 608849919 8142848 83 Linux
/dev/sda11 608851968 625139711 8143872 82 Linux swap /
Solaris
pci data: output of "lspci -nn":
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller
(rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root
Port (rev 03)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2
01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500
GT] (rev a1)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE
Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE
Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem Model
5610 (rev 01)
06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
/var/log/installer/syslog is attached.
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [o]
Detect network card: [o]
Configure network: [ ]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [ ]
Install base system: [o]
Clock/timezone setup: [o]
User/password setup: [o]
Install tasks: [o]
Install boot loader: [o]
Overall install: [o]
Comments/Problems:
there are no problems to report.
Description of the install:
this install was started from the boot menu "install" choice.
no network was connected.
the partitioning was performed with gparted prior to the install.
--
http://www.fastmail.fm - Or how I learned to stop worrying and
love email again
Attachment:
syslog
Description: Binary data