[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#706398: Installation Reports - Successful on Acer Aspire One 725 (with extra firmware installed)

Package: installation-reports

Boot method: DVD1
Image version: http://cdimage.debian.org/cdimage/wheezy_di_rc2/amd64/jigdo-dvd/debian-wheezy-DI-rc2-amd64-DVD-1.jigdo (Using RC1 DVD as base) 
Date: 29 April 2013 3pm...

Machine: Acer Aspire One 725
Processor:AMD C-70 APU with Radeon(tm) HD Graphics x 2
Memory: 3.6 GiB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on rootfs rootfs 708807664 77459032 595343308 12% / udev devtmpfs 10240 0 10240 0% /dev tmpfs tmpfs 607380 748 606632 1% /run /dev/disk/by-uuid/cb7fd676-8b6e-4b32-80a9-3a3488b02e93 ext4 708807664 77459032 595343308 12% / tmpfs tmpfs 5120 0 5120 0% /run/lock tmpfs tmpfs 3707780 132 3707648 1% /run/shm 


Output of lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1) 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) 


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]
Comments/Problems: Once the install was finished, I needed to install <firmware-realtek> and <firmware-linux-nonfree> to get wireless and Gnome 3 in 3D. These are specific to the hardware - the installer correctly identified the need for the wireless driver.
Install went very smoothly, as did the jigdo download, which I hadn't used before.
The brightness controls don't work on this hardware as this requires linux kernel 3.7 (I think). I have set sources to <testing> so will see how it works after Wheezy becomes stable, and updated kernels make it into Jessie (testing). 

Happy with the install. Thanks
Reply to: