Package: installation-reports Boot method: DVD Image version: debian-testing-amd64-DVD-1.iso 2013-03-18 06:41 the other via network. Date: 2013-03-18 13:00 Machine: Compaq 615 Notebook Processor: AMD Athlon(tm)X2 DualCore QL-66 × 2 Memory: 4 GB Partitions: rootfs rootfs 12918952 4436428 7826272 37% / udev devtmpfs 10240 0 10240 0% /dev tmpfs t mpfs 380048 752 379296 1% /run /dev/disk/by-uuid/676ab.. ext4 12918952 4436428 7826272 37% / tmpfs tmpfs 5120 0 5120 0% /run/lock tmpfs tmpfs 1638840 84 1638756 1% /run/shm /dev/sda7 ext4 98086124 1170284 91933284 2% /home Output of lspci -knn (or lspci -nn): 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] 00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8042 PCI-E Fast Ethernet Controller [11ab:4357] (rev 10) 06:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [OK] Detect network card: [OK] Configure network: [OK] Detect CD: [OK] Load installer modules: [OK] Detect hard drives: [OK] Partition hard drives: [OK] Install base system: [OK] Clock/timezone setup: [OK] User/password setup: [OK] Install tasks: [OK] Install boot loader: [OK] Overall install: [OK] Comments/Problems: Dualboot: second is Windows XP 2 drivers were missing: For one the error message says to use firmware.tar.gz. The second driver missing was the firmware-b43-lpphy-installer for the BROADCOM BCM4312. I tried different versions: the installer complains (message translated from German to English): ERROR: dependency not satisfiable: b43_fwcutter (>=1:015_14) Then I found it in the web at „//ftp.br.debian.org/debian/ wheezy main contrib non-free“. Up to now it works fine. Thank you very much, Guenther |