[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#695328: marked as done ([testing/wheezy] UEFI installed system fails to boot)

Your message dated Fri, 1 Mar 2013 23:47:26 -0800
with message-id <20130302074726.GY13908@kenyonralph.com>
and subject line giving up for now
has caused the Debian Bug report #695328,
regarding [testing/wheezy] UEFI installed system fails to boot
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
695328: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=695328
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: USB memory stick

Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso
dated 2012-12-07T04:21

Date: 2012-12-07T22:00-08:00

Machine: Intel DH77EB motherboard, latest firmware, version 0097 (dated 2012-10-31)
Processor: Intel Core i7-3770
Memory: 32 GB
Partitions: the installer's "use the whole disk" default (efi boot
partition, ext4 root, swap)

Output of lspci -knn (or lspci -nn): (output taken using grml 2012.05)
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0150] (rev 09)
	Subsystem: Intel Corporation Device [8086:2032]
	Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0162] (rev 09)
	Subsystem: Intel Corporation Device [8086:2032]
	Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]
	Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]
	Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]
	Kernel driver in use: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]
	Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC Controller [8086:1e4a] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA AHCI Controller [8086:1e02] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]
	Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
	Subsystem: Intel Corporation Device [8086:2032]


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [E]

Comments/Problems:

Installer booted into EFI bootloader, and I used the graphical
installer. Installation goes fine, but the resulting system does not
boot. The computer acts as if there is no bootable disk ("please
insert boot disk").

Ubuntu 12.10 installs and boots using UEFI fine. I suspect a problem
with the EFI NVRAM boot entry that the Debian Installer creates, as
reported by efibootmgr. It looked quite different from what Ubuntu
created (unfortunately I didn't save the output), but I think the
Ubuntu entry had a /boot/efi path in it.

The motherboard is set to the default of "try EFI booting first, and
fall back to legacy BIOS".

Booting into rescue mode and running modprobe efivars ; efibootmgr
--verbose gives this output:

BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 0000,0003,0001,0002
Boot0000* debian	Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)
Boot0001* SATA : PORT 6G 0 : INTEL SSDSC2CW120A3 : PART 0 : Boot Drive	BIOS(2,0,00)AMBO
Boot0002* USB :  0.00 : PART 0 : Boot Drive	BIOS(2,0,00)AMBO
Boot0003* UEFI : USB :  0.00 : PART 1 : OS Bootloader	ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(1,0)HD(2,6f000,380,73bb6f1a)AMBO

How can I help debug this further?

-- 
Kenyon Ralph

Attachment: signature.asc
Description: Digital signature


--- End Message ---
--- Begin Message --- 
I'm giving up on this for now. I just changed to BIOS mode and am
going to use wheezy that way.

-- 
Kenyon Ralph

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: