Your message dated Sat, 29 Dec 2012 22:14:27 +0100 with message-id <20121229211427.GZ6335@mykerinos.kheops.frmug.org> and subject line Re: Bug#696952: installation-reports: evdev crashed with backtrace - kernel oops has caused the Debian Bug report #696952, regarding installation-reports: evdev crashed with backtrace - kernel oops to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 696952: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=696952 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-reports: evdev crashed with backtrace - kernel oops
- From: Sandy Beach <dune97@yahoo.com>
- Date: Sat, 29 Dec 2012 16:01:52 -0500
- Message-id: <[🔎] 20121229210152.3119.45185.reportbug@grg>
Package: installation-reports Severity: normal Tags: d-i -- Package-specific info: Boot method: CD Image version: debian-wheezy-DI-b4-amd64-i386-netinst.iso Date: <Date and time of the install> 28dec2012 22:00 EST Machine: personal build - intel D845grg 2.2Ghz p4 512Mb pc2100 ddr 8Mb shared vide http://downloadmirror.intel.com/15328/eng/D845GRG_D845GBV_ProductGuide_English.pdf Partitions: <df -Tl will do; the raw partition table is preferred> sfdisk -l Disk /dev/sda: 14593 cylinders, 255 heads, 63 sectors/track Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sda1 * 0+ 46 47- 377496 83 Linux /dev/sda2 47 419 373 2996122+ 83 Linux /dev/sda3 420 792 373 2996122+ 83 Linux /dev/sda4 793+ 14592 13800- 110848469+ 5 Extended /dev/sda5 793+ 2281 1489- 11960361 83 Linux /dev/sda6 2282+ 3770 1489- 11960361 83 Linux /dev/sda7 3771+ 5259 1489- 11960361 83 Linux /dev/sda8 5260+ 6748 1489- 11960361 83 Linux /dev/sda9 6749+ 8237 1489- 11960361 83 Linux /dev/sda10 8238+ 9726 1489- 11960361 83 Linux /dev/sda11 9727+ 11215 1489- 11960361 83 Linux /dev/sda12 11216+ 12704 1489- 11960361 83 Linux /dev/sda13 12705+ 14193 1489- 11960361 83 Linux /dev/sda14 14194+ 14392 199- 1598436 83 Linux /dev/sda15 14393+ 14592 200- 1606468+ 82 Linux swap / Solaris Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Clock/timezone setup: [O] User/password setup: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> install was flawless to sda10 using an ext4 default filesystem. see # 695476 After install issues with X for this machine. I did a minimal Debian install (unchecked everything during tasksel) then I did a minimal X install with firmware-linux and firmware-linux-nonfree ( original dmesg showed firmware for intel E100 network was missing ), X started fine ( as far as I could see ), to fallback xterm session. until I tried to open a second xterm and run a command in the second xterm when the system hung with an audible buzz. I'll setup ssh if debian-boot or debian-x want moreinfo. dmesg tail shows [ 1.984621] usbcore: registered new interface driver usbhid [ 1.984626] usbhid: USB HID core driver [ 3.640313] PM: Starting manual resume from disk [ 3.640321] PM: Hibernation image partition 8:15 present [ 3.640324] PM: Looking for hibernation image. [ 3.640641] PM: Image not found (code -22) [ 3.640644] PM: Hibernation image not present or could not be loaded. [ 3.688199] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null) [ 5.063867] udevd[292]: starting version 175 [ 5.371286] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 5.371301] ACPI: Sleep Button [SLPB] [ 5.371407] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.371414] ACPI: Power Button [PWRF] [ 5.403965] intel_rng: Firmware space is locked read-only. If you can't or [ 5.403968] intel_rng: don't want to disable this in firmware setup, and if [ 5.403970] intel_rng: you are certain that your system has a functional [ 5.403972] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 5.419455] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.458430] parport_pc 00:09: reported by Plug and Play ACPI [ 5.458461] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 5.616917] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.750580] iTCO_vendor_support: vendor-support=0 [ 5.776920] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 5.777052] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) [ 5.778483] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.802503] [drm] Initialized drm 1.1.0 20060810 [ 5.807824] Error: Driver 'pcspkr' is already registered, aborting... [ 5.821557] snd_intel8x0 0000:00:1f.5: setting latency timer to 64 [ 6.192037] intel8x0_measure_ac97_clock: measured 54684 usecs (2635 samples) [ 6.192043] intel8x0: clocking to 48000 [ 6.193208] i915 0000:00:02.0: setting latency timer to 64 [ 6.230894] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.230899] [drm] Driver supports precise vblank timestamp query. [ 6.231731] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.246855] [drm] initialized overlay support [ 6.365265] fbcon: inteldrmfb (fb0) is primary device [ 6.486758] Console: switching to colour frame buffer device 128x48 [ 6.491711] fb0: inteldrmfb frame buffer device [ 6.491714] drm: registered panic notifier [ 6.491802] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.645237] Adding 1606464k swap on /dev/sda15. Priority:-1 extents:1 across:1606464k [ 8.677064] EXT4-fs (sda10): re-mounted. Opts: (null) [ 8.926640] EXT4-fs (sda10): re-mounted. Opts: errors=remount-ro [ 9.103479] loop: module loaded [ 11.197103] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.200184] e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex [ 11.200370] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Xorg.0.log shows X.Org X Server 1.12.4 Release Date: 2012-08-27 [ 3436.888] X Protocol Version 11, Revision 0 [ 3436.888] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian [ 3436.889] Current Operating System: Linux grg 3.2.0-4-686-pae #1 SMP Debian 3.2.35-2 i686 [ 3436.889] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=e197c52a-5831-44ca-a9eb-a522510d9c8a ro quiet [ 3436.891] Build Date: 29 November 2012 08:52:43PM [ 3436.892] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>) [ 3436.892] Current version of pixman: 0.26.0 [ 3436.894] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3436.894] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3436.899] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 28 22:53:57 2012 [ 3436.901] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 3436.901] (==) No Layout section. Using the first Screen section. [ 3436.901] (==) No screen section available. Using defaults. [ 3436.901] (**) |-->Screen "Default Screen Section" (0) [ 3436.901] (**) | |-->Monitor "<default monitor>" [ 3436.902] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 3436.902] (==) Automatically adding devices [ 3436.902] (==) Automatically enabling devices [ 3436.902] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 3436.902] Entry deleted from font path. [ 3436.902] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 3436.902] Entry deleted from font path. [ 3436.902] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 3436.902] Entry deleted from font path. [ 3436.902] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. [ 3436.902] Entry deleted from font path. [ 3436.902] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 3436.902] Entry deleted from font path. [ 3436.902] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 3436.902] Entry deleted from font path. [ 3436.902] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 3436.902] Entry deleted from font path. [ 3436.902] (==) FontPath set to: /usr/share/fonts/X11/misc, built-ins [ 3436.902] (==) ModulePath set to "/usr/lib/xorg/modules" [ 3436.902] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 3436.902] (II) Loader magic: 0xb78015a0 [...] [ 3437.586] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 3437.586] (II) No input driver specified, ignoring this device. [ 3437.586] (II) This device may have been added with another device file. [ 3514.766] [mi] EQ overflowing. Additional events will be discarded until existing events are processed. [ 3514.766] [ 3514.766] Backtrace: [ 3514.766] 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77946d9] [ 3514.766] 1: /usr/bin/X (mieqEnqueue+0x22b) [0xb7772fcb] [ 3514.766] 2: /usr/bin/X (0xb7617000+0x513c5) [0xb76683c5] [ 3514.766] 3: /usr/bin/X (xf86PostMotionEventM+0x24b) [0xb76a252b] [ 3514.766] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6f6e000+0x35ad) [0xb6f715ad] [ 3514.766] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6f6e000+0x4a2c) [0xb6f72a2c] [ 3514.767] 6: /usr/bin/X (0xb7617000+0x7abc1) [0xb7691bc1] [ 3514.767] 7: /usr/bin/X (0xb7617000+0xa090a) [0xb76b790a] [ 3514.767] 8: (vdso) (__kernel_sigreturn+0x0) [0xb75f8400] [ 3514.767] 9: (vdso) (__kernel_vsyscall+0x10) [0xb75f8424] [ 3514.767] 10: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (ioctl+0x19) [0xb7375a99] [ 3514.767] 11: /usr/lib/i386-linux-gnu/libdrm.so.2 (drmIoctl+0x34) [0xb709d054] [ 3514.767] 12: /usr/lib/i386-linux-gnu/libdrm_intel.so.1 (drm_intel_gem_bo_map_gtt+0x75) [0xb6f82395] [ 3514.767] 13: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f9a000+0x1153c) [0xb6fab53c] [ 3514.767] 1 report. Please compress large files using gzip. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="7.0 (wheezy) - installer build 20121114" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== uname -a: Linux grg 3.2.0-4-486 #1 Debian 3.2.32-1 i686 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 01) lspci -knn: Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] lspci -knn: Kernel driver in use: agpgart-intel lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 01) lspci -knn: Subsystem: Intel Corporation Device [8086:5247] lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) lspci -knn: Subsystem: Intel Corporation Device [8086:5247] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) lspci -knn: Subsystem: Intel Corporation Device [8086:5247] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) lspci -knn: Subsystem: Intel Corporation Device [8086:5247] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) lspci -knn: Subsystem: Intel Corporation Device [8086:5247] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81) lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 01) lspci -knn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 01) lspci -knn: Subsystem: Intel Corporation Device [8086:5247] lspci -knn: Kernel driver in use: ata_piix lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01) lspci -knn: Subsystem: Intel Corporation Device [8086:5247] lspci -knn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01) lspci -knn: Subsystem: Intel Corporation Device [8086:0102] lspci -knn: 01:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller [8086:1039] (rev 81) lspci -knn: Subsystem: Intel Corporation Device [8086:3011] lspci -knn: Kernel driver in use: e100 usb-list: usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 02 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 03 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 03 Device 02: Microsoft Wheel Mouse Optical® [045e:0040] usb-list: Level 01 Parent 01 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: Microsoft usb-list: Interface 00: Class 03(HID ) Subclass 01 Protocol 02 Driver usbhid usb-list: usb-list: Bus 04 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 3.2.0-4-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub lsmod: Module Size Used by lsmod: fuse 51958 0 lsmod: ufs 57656 0 lsmod: qnx4 12992 0 lsmod: ntfs 161713 0 lsmod: reiserfs 167376 0 lsmod: efivars 17508 0 lsmod: dm_mod 57438 0 lsmod: md_mod 81567 0 lsmod: xfs 511016 0 lsmod: jfs 131002 0 lsmod: ext4 298156 1 lsmod: crc16 12327 1 ext4 lsmod: jbd2 51542 1 ext4 lsmod: ext3 133836 0 lsmod: jbd 42496 1 ext3 lsmod: btrfs 471514 0 lsmod: zlib_deflate 21318 1 btrfs lsmod: crc32c 12576 1 lsmod: libcrc32c 12394 1 btrfs lsmod: vfat 17117 0 lsmod: fat 40365 1 vfat lsmod: ext2 49804 0 lsmod: mbcache 12897 3 ext2,ext3,ext4 lsmod: e100 31602 0 lsmod: mii 12595 1 e100 lsmod: nls_utf8 12416 0 lsmod: isofs 30544 0 lsmod: usb_storage 35245 0 lsmod: thermal 13103 0 lsmod: fan 12594 0 lsmod: thermal_sys 17752 2 fan,thermal lsmod: usbhid 31673 0 lsmod: hid 60116 1 usbhid lsmod: sg 21589 0 lsmod: sr_mod 17468 0 lsmod: sd_mod 35425 3 lsmod: crc_t10dif 12332 1 sd_mod lsmod: cdrom 34813 1 sr_mod lsmod: ata_generic 12439 0 lsmod: uhci_hcd 22506 0 lsmod: ehci_hcd 35684 0 lsmod: ata_piix 21296 2 lsmod: libata 121219 2 ata_piix,ata_generic lsmod: parport_pc 22036 0 lsmod: parport 31375 1 parport_pc lsmod: scsi_mod 135503 5 libata,sd_mod,sr_mod,sg,usb_storage lsmod: floppy 48216 0 lsmod: usbcore 100611 5 ehci_hcd,uhci_hcd,usbhid,usb_storage lsmod: usb_common 12338 1 usbcore df: Filesystem 1K-blocks Used Available Use% Mounted on df: none 50600 92 50508 0% /run df: tmpfs 252984 0 252984 0% /dev df: /dev/sda10 11772600 566336 10608248 5% /target df: /dev/sda10 11772600 566336 10608248 5% /dev/.static/dev df: tmpfs 252984 0 252984 0% /target/dev free: total used free shared buffers free: Mem: 505968 393568 112400 0 29032 free: -/+ buffers: 364536 141432 free: Swap: 1606464 144 1606320 /proc/cmdline: vga=788 initrd=/install.386/initrd.gz BOOT_IMAGE=/install.386/vmlinuz /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 15 /proc/cpuinfo: model : 2 /proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 2.26GHz /proc/cpuinfo: stepping : 4 /proc/cpuinfo: microcode : 0x18 /proc/cpuinfo: cpu MHz : 2266.587 /proc/cpuinfo: cache size : 512 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 2 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pebs bts /proc/cpuinfo: bogomips : 4533.17 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: cache_alignment : 128 /proc/cpuinfo: address sizes : 36 bits physical, 32 bits virtual /proc/cpuinfo: power management: /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-0060 : keyboard /proc/ioports: 0064-0064 : keyboard /proc/ioports: 0070-0071 : rtc0 /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:1f.1 /proc/ioports: 0170-0177 : ata_piix /proc/ioports: 01f0-01f7 : 0000:00:1f.1 /proc/ioports: 01f0-01f7 : ata_piix /proc/ioports: 0376-0376 : 0000:00:1f.1 /proc/ioports: 0376-0376 : ata_piix /proc/ioports: 0378-037a : parport0 /proc/ioports: 037b-037f : parport0 /proc/ioports: 03c0-03df : vesafb /proc/ioports: 03f2-03f2 : floppy /proc/ioports: 03f4-03f5 : floppy /proc/ioports: 03f6-03f6 : 0000:00:1f.1 /proc/ioports: 03f6-03f6 : ata_piix /proc/ioports: 03f7-03f7 : floppy /proc/ioports: 03f8-03ff : serial /proc/ioports: 0400-047f : pnp 00:0b /proc/ioports: 0400-0403 : ACPI PM1a_EVT_BLK /proc/ioports: 0404-0405 : ACPI PM1a_CNT_BLK /proc/ioports: 0408-040b : ACPI PM_TMR /proc/ioports: 0420-0420 : ACPI PM2_CNT_BLK /proc/ioports: 0428-042f : ACPI GPE0_BLK /proc/ioports: 0480-04bf : pnp 00:0b /proc/ioports: 04d0-04d1 : pnp 00:05 /proc/ioports: 0680-06ff : pnp 00:0b /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: d000-dfff : PCI Bus 0000:01 /proc/ioports: dc00-dc3f : 0000:01:08.0 /proc/ioports: dc00-dc3f : e100 /proc/ioports: e000-e01f : 0000:00:1f.3 /proc/ioports: e080-e0bf : 0000:00:1f.5 /proc/ioports: e400-e4ff : 0000:00:1f.5 /proc/ioports: e800-e81f : 0000:00:1d.0 /proc/ioports: e800-e81f : uhci_hcd /proc/ioports: e880-e89f : 0000:00:1d.1 /proc/ioports: e880-e89f : uhci_hcd /proc/ioports: ec00-ec1f : 0000:00:1d.2 /proc/ioports: ec00-ec1f : uhci_hcd /proc/ioports: ffa0-ffaf : 0000:00:1f.1 /proc/ioports: ffa0-ffaf : ata_piix /proc/iomem: 00000000-0000ffff : reserved /proc/iomem: 00010000-0009fbff : System RAM /proc/iomem: 0009fc00-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000e0000-000fffff : reserved /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-1f73ffff : System RAM /proc/iomem: 01000000-01286beb : Kernel code /proc/iomem: 01286bec-013cc0bf : Kernel data /proc/iomem: 0143e000-014bafff : Kernel bss /proc/iomem: 1f740000-1f74ffff : ACPI Tables /proc/iomem: 1f750000-1f7fffff : ACPI Non-volatile Storage /proc/iomem: 1f800000-1fffffff : RAM buffer /proc/iomem: 20000000-200003ff : 0000:00:1f.1 /proc/iomem: cea00000-ceafffff : PCI Bus 0000:01 /proc/iomem: e0000000-efffffff : 0000:00:00.0 /proc/iomem: f0000000-f7ffffff : 0000:00:02.0 /proc/iomem: f0000000-f07cffff : vesafb /proc/iomem: fec00000-fec003ff : IOAPIC 0 /proc/iomem: fee00000-fee00fff : Local APIC /proc/iomem: fee00000-fee00fff : pnp 00:0b /proc/iomem: ff800000-ff8fffff : PCI Bus 0000:01 /proc/iomem: ff8ff000-ff8fffff : 0000:01:08.0 /proc/iomem: ff8ff000-ff8fffff : e100 /proc/iomem: ffa7f400-ffa7f4ff : 0000:00:1f.5 /proc/iomem: ffa7f800-ffa7f9ff : 0000:00:1f.5 /proc/iomem: ffa7fc00-ffa7ffff : 0000:00:1d.7 /proc/iomem: ffa7fc00-ffa7ffff : ehci_hcd /proc/iomem: ffa80000-ffafffff : 0000:00:02.0 /proc/interrupts: CPU0 /proc/interrupts: 0: 13435 IO-APIC-edge timer /proc/interrupts: 1: 1056 IO-APIC-edge i8042 /proc/interrupts: 6: 10 IO-APIC-edge floppy /proc/interrupts: 7: 0 IO-APIC-edge parport0 /proc/interrupts: 8: 1 IO-APIC-edge rtc0 /proc/interrupts: 9: 0 IO-APIC-fasteoi acpi /proc/interrupts: 14: 94396 IO-APIC-edge ata_piix /proc/interrupts: 15: 6250 IO-APIC-edge ata_piix /proc/interrupts: 16: 0 IO-APIC-fasteoi uhci_hcd:usb2 /proc/interrupts: 18: 0 IO-APIC-fasteoi uhci_hcd:usb4 /proc/interrupts: 19: 37 IO-APIC-fasteoi uhci_hcd:usb3 /proc/interrupts: 20: 85222 IO-APIC-fasteoi eth0 /proc/interrupts: 23: 2 IO-APIC-fasteoi ehci_hcd:usb1 /proc/interrupts: NMI: 47 Non-maskable interrupts /proc/interrupts: LOC: 141279 Local timer interrupts /proc/interrupts: SPU: 0 Spurious interrupts /proc/interrupts: PMI: 47 Performance monitoring interrupts /proc/interrupts: IWI: 0 IRQ work interrupts /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 505968 kB /proc/meminfo: MemFree: 112400 kB /proc/meminfo: Buffers: 29032 kB /proc/meminfo: Cached: 313160 kB /proc/meminfo: SwapCached: 76 kB /proc/meminfo: Active: 193532 kB /proc/meminfo: Inactive: 125812 kB /proc/meminfo: Active(anon): 828 kB /proc/meminfo: Inactive(anon): 17516 kB /proc/meminfo: Active(file): 192704 kB /proc/meminfo: Inactive(file): 108296 kB /proc/meminfo: Unevictable: 41100 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 505968 kB /proc/meminfo: LowFree: 112400 kB /proc/meminfo: SwapTotal: 1606464 kB /proc/meminfo: SwapFree: 1606320 kB /proc/meminfo: Dirty: 940 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 18232 kB /proc/meminfo: Mapped: 2232 kB /proc/meminfo: Shmem: 92 kB /proc/meminfo: Slab: 24756 kB /proc/meminfo: SReclaimable: 20252 kB /proc/meminfo: SUnreclaim: 4504 kB /proc/meminfo: KernelStack: 456 kB /proc/meminfo: PageTables: 348 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 1859448 kB /proc/meminfo: Committed_AS: 23664 kB /proc/meminfo: VmallocTotal: 516856 kB /proc/meminfo: VmallocUsed: 8516 kB /proc/meminfo: VmallocChunk: 507740 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 4096 kB /proc/meminfo: DirectMap4k: 204032 kB /proc/meminfo: DirectMap4M: 311296 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/devices/platform/i8042/serio0/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=sysrq kbd /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=045e Product=0040 Version=0100 /proc/bus/input/devices: N: Name="Microsoft Microsoft Wheel Mouse Optical®" /proc/bus/input/devices: P: Phys=usb-0000:00:1d.1-1/input0 /proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=mouse0 /proc/bus/input/devices: B: PROP=0 /proc/bus/input/devices: B: EV=17 /proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0 /proc/bus/input/devices: B: REL=103 /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash
--- End Message ---
--- Begin Message ---
- To: Sandy Beach <dune97@yahoo.com>, 696952-done@bugs.debian.org
- Subject: Re: Bug#696952: installation-reports: evdev crashed with backtrace - kernel oops
- From: Christian PERRIER <bubulle@debian.org>
- Date: Sat, 29 Dec 2012 22:14:27 +0100
- Message-id: <20121229211427.GZ6335@mykerinos.kheops.frmug.org>
- In-reply-to: <[🔎] 20121229210152.3119.45185.reportbug@grg>
- References: <[🔎] 20121229210152.3119.45185.reportbug@grg>
Quoting Sandy Beach (dune97@yahoo.com): > Overall install: [O] Given that your installation was a complete success, I do as usual with reports for successful installations: I close the bug..:-) This does not of course mean you weren't right to report. Knowing the installations are correct is important for the d-i team. Many thanks for your time testing the Debian Installer and reporting your results. Have fun with your new Debian system!Attachment: signature.asc
Description: Digital signature
--- End Message ---