[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#690292: problem after installing debian 7 kfreebsd

Package: installation-reports
Boot method: CD -> net install
Image version: http://www.debian.org/devel/debian-installer/News/2012/20120909 
Date: 2012-10-10 / 19:30 MESZ (Germany)
Machine: Self built server system using Intel S1200KPR Board
Processor: Xeon E3-1225v2 (Ivy Bridge)
Memory: 8 GB
Partitions: created during installation on an previously unformatted Samsung 830 SSD (128 GB)
Tried with option
“separate /home-partition” and
“separate partitions for /home /swap /tmp /var”
Output of lspci -knn (or lspci -nn): can’t give lspci , since the system won’t boot after install
But the system contains only of
Motherboard S1200KP-R (R -> supports Ivy Bridge)
LSI MegaRaid 9240-8i (with 7 x 2 TB Hard disks)
Processor Xeon E3-1225v2
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]
System will not boot successfully AFTER installation is done. During installation no problems were visible, but system just hangs on reboot (grub works fine though. The “hang” appears during device identification after that. I cannot really say because booting process is really fast on the SSD. So it is possible the system hangs when trying to load into graphical mode probably because of the Intel P4000 Graphics (Server-Variant of HD4000)
Mit freundlichen Grüßen / Best regards

Sven Leuschner

Tel. +49 391 243-2457
Fax +49 391 243-2179

Reply to: