[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#672637: marked as done (Debian Wheezy installation fails on Asus Z7750)

Your message dated Sat, 14 Jul 2012 10:17:40 -0600
with message-id <20120714161740.GV5758@mykerinos.kheops.frmug.org>
and subject line Re: Bug#672637: Installation was successfully
has caused the Debian Bug report #672637,
regarding Debian Wheezy installation fails on Asus Z7750
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
672637: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672637
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: CD
Image version: Self-made boot-cd with actual installer from wheezy
Date: 2012-05-12

Machine: Laptop Asus Z7750
Processor: Pentium M @ 1,6GHz
Memory: 512MB
Partitions: <df -Tl will do; the raw partition table is preferred>

Output of lspci -knn:

> lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 21)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:186a]
> lspci -knn: 	Kernel driver in use: agpgart-intel
> lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 21)
> lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1869]
> lspci -knn: 	Kernel driver in use: uhci_hcd
> lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1869]
> lspci -knn: 	Kernel driver in use: uhci_hcd
> lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1869]
> lspci -knn: 	Kernel driver in use: uhci_hcd
> lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1868]
> lspci -knn: 	Kernel driver in use: ehci_hcd
> lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83)
> lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
> lspci -knn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1869]
> lspci -knn: 	Kernel driver in use: ata_piix
> lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1869]
> lspci -knn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1713]
> lspci -knn: 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1826]
> lspci -knn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50]
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1772]
> lspci -knn: 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet [14e4:169c] (rev 03)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1735]
> lspci -knn: 	Kernel driver in use: tg3
> lspci -knn: 02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1864]
> lspci -knn: 	Kernel driver in use: yenta_cardbus
> lspci -knn: 02:01.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1864]
> lspci -knn: 	Kernel driver in use: yenta_cardbus
> lspci -knn: 02:01.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 04)
> lspci -knn: 	Subsystem: ASUSTeK Computer Inc. Device [1043:1867]
> lspci -knn: 	Kernel driver in use: firewire_ohci
> lspci -knn: 02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
> lspci -knn: 	Subsystem: Intel Corporation Device [8086:2701]
> lspci -knn: 	Kernel driver in use: ipw2200

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [E]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:

Installation of base system fails during installation the kernel.
The problem is, the Pentium M doesn't support PAE.
But the installer tries to install the 686-Kernel.

Here the output of proc/cpuinfo:

> /proc/cpuinfo: processor	: 0
> /proc/cpuinfo: vendor_id	: GenuineIntel
> /proc/cpuinfo: cpu family	: 6
> /proc/cpuinfo: model		: 13
> /proc/cpuinfo: model name	: Intel(R) Pentium(R) M processor 1.60GHz
> /proc/cpuinfo: stepping	: 6
> /proc/cpuinfo: cpu MHz		: 1599.790
> /proc/cpuinfo: cache size	: 2048 KB
> /proc/cpuinfo: fdiv_bug	: no
> /proc/cpuinfo: hlt_bug		: no
> /proc/cpuinfo: f00f_bug	: no
> /proc/cpuinfo: coma_bug	: no
> /proc/cpuinfo: fpu		: yes
> /proc/cpuinfo: fpu_exception	: yes
> /proc/cpuinfo: cpuid level	: 2
> /proc/cpuinfo: wp		: yes
> /proc/cpuinfo: flags		: fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2
> /proc/cpuinfo: bogomips	: 3199.58
> /proc/cpuinfo: clflush size	: 64
> /proc/cpuinfo: cache_alignment	: 64
> /proc/cpuinfo: address sizes	: 32 bits physical, 32 bits virtual
> /proc/cpuinfo: power management:
> /proc/cpuinfo: 

The installer have to be install the 486-Kernel instead of the 686-Kernel.

Best regards
Bernhard

--- End Message ---
--- Begin Message --- 
Quoting Bernhard (bewoern1@yahoo.de):
> Hello,
> 
> I tested the installation today.
> The installation was successfully with actual installer from sid.


Easy to fix..:-)

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: