Bug#675017: installation-reports: wheezy alpha 1 on efikamx: no disk found
Package: installation-reports
Severity: important
Tags: d-i
I've tried to use the Wheezy Alpha1 images for armhf on my efikamx, but it would not find any disks, neither the internal flash nor an external usbstick nor the sd-card used to boot.
│ No disk drive was detected. If you know the name of the driver needed by your disk drive, you can select it from the list. │
│ │
│ Driver needed for your disk drive: │
│ │
│ continue with no disk drive │
│ loop │
│ scsi_dh │
│ scsi_mod │
│ none of the above │
│ │
│ <Go Back>
-- Package-specific info:
Boot method: network-console and netboot images
Image version: http://ftp.nl.debian.org/debian/dists/testing/main/installer-armhf/current/images/mx5/
Date: 2012-05-28
Machine: EFIKA MX Smarttop
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
~ # lsmod
Module Size Used by
usb_storage 34269 0
scsi_mod 150594 1 usb_storage
rt2800usb 10607 0
rt2800lib 38102 1 rt2800usb
crc_ccitt 1125 1 rt2800lib
rt2x00usb 7622 1 rt2800usb
rt2x00lib 30646 3 rt2x00usb,rt2800lib,rt2800usb
mac80211 206487 3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211 157337 2 mac80211,rt2x00lib
rfkill 14738 1 cfg80211
asix 12353 0
usbnet 13175 1 asix
mii 3429 2 usbnet,asix
~ # uname -a
Linux efikamx 3.2.0-2-mx5 #1 Sun Apr 15 19:59:08 UTC 2012 armv7l GNU/Linux
~ # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-mx5 (Debian 3.2.15-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-3) ) #1 Sun Apr 15 19:59:08 UTC 2012
[ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Genesi EfikaMX nettop
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c03e11f4, node_mem_map c0449000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130048 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: initrd=0x91000000 console=ttymxc0,115200 root=/dev/sda2 rootwait rw video=imx-ipuv3-fb:1024x600M-16@60 quiet lpj=3997696 earlyprintk=serial
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 511496k/511496k available, 12792k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf4000000 ( 312 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc03879dc (3583 kB)
[ 0.000000] .init : 0xc0388000 - 0xc03a8000 ( 128 kB)
[ 0.000000] .data : 0xc03a8000 - 0xc03e2840 ( 235 kB)
[ 0.000000] .bss : 0xc03e2864 - 0xc04481c4 ( 407 kB)
[ 0.000000] NR_IRQS:400
[ 0.000000] TrustZone Interrupt Controller (TZIC) initialized
[ 0.000000] CPU identified as i.MX51, silicon rev 3.0
[ 0.000000] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 64585ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000265] Calibrating delay loop (skipped) preset value.. 799.53 BogoMIPS (lpj=3997696)
[ 0.000283] pid_max: default: 32768 minimum: 301
[ 0.000401] Security Framework initialized
[ 0.000463] Mount-cache hash table entries: 512
[ 0.000873] Initializing cgroup subsys cpuacct
[ 0.000902] Initializing cgroup subsys memory
[ 0.000938] Initializing cgroup subsys devices
[ 0.000948] Initializing cgroup subsys freezer
[ 0.000958] Initializing cgroup subsys net_cls
[ 0.000966] Initializing cgroup subsys blkio
[ 0.000990] Initializing cgroup subsys perf_event
[ 0.001072] CPU: Testing write buffer coherency: ok
[ 0.001293] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.002434] devtmpfs: initialized
[ 0.004458] print_constraints: dummy:
[ 0.004691] NET: Registered protocol family 16
[ 0.260232] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.262780] bio: create slab <bio-0> at 0
[ 0.263390] usbcore: registered new interface driver usbfs
[ 0.263474] usbcore: registered new interface driver hub
[ 0.263600] usbcore: registered new device driver usb
[ 0.264236] Switching to clocksource mxc_timer1
[ 0.281212] NET: Registered protocol family 2
[ 0.281490] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.282194] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.282748] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.283029] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.283039] TCP reno registered
[ 0.283051] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.283080] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.283381] NET: Registered protocol family 1
[ 0.283592] Unpacking initramfs...
[ 0.610354] Freeing initrd memory: 3856K
[ 0.611120] audit: initializing netlink socket (disabled)
[ 0.611174] type=2000 audit(0.600:1): initialized
[ 0.626702] VFS: Disk quotas dquot_6.5.2
[ 0.626809] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.626970] msgmni has been set to 1006
[ 0.627676] alg: No test for stdrng (krng)
[ 0.627821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.627838] io scheduler noop registered
[ 0.627847] io scheduler deadline registered
[ 0.627883] io scheduler cfq registered (default)
[ 0.631539] imx-sdma imx35-sdma: initialized
[ 0.632148] Serial: IMX driver
[ 0.632269] imx21-uart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a IMX
[ 0.632387] console [ttymxc0] enabled
[ 0.633637] mc13xxx spi0.0: mc13892: rev: 2.0, fin: 2, fab: 0, icid: 7/2
[ 0.634721] print_constraints: SW1: 600 <--> 1375 mV at 1125 mV
[ 0.635039] print_constraints: SW2: 900 <--> 1850 mV at 1300 mV
[ 0.635294] print_constraints: SW3: 1100 <--> 1850 mV at 1250 mV
[ 0.635542] print_constraints: SW4: 1100 <--> 1850 mV at 1800 mV
[ 0.635710] print_constraints: SWBST: 5000 mV
[ 0.636032] print_constraints: VIOHI: 2775 mV
[ 0.636424] print_constraints: VPLL: 1050 <--> 1800 mV at 1800 mV
[ 0.636808] print_constraints: VDIG: 1050 <--> 1800 mV at 1650 mV
[ 0.637203] print_constraints: VSD: 1800 <--> 3150 mV at 3150 mV
[ 0.637612] print_constraints: VUSB2: 2400 <--> 2775 mV at 2600 mV
[ 0.638097] print_constraints: VVIDEO: 2775 mV
[ 0.638470] print_constraints: VAUDIO: 2300 <--> 3000 mV at 3000 mV
[ 0.638840] print_constraints: VCAM: 2500 <--> 3000 mV at 2600 mV fast normal
[ 0.639228] print_constraints: VGEN1: 1200 <--> 3150 mV at 1200 mV
[ 0.639605] print_constraints: VGEN2: 1200 <--> 3150 mV at 3150 mV
[ 0.639973] print_constraints: VGEN3: 1800 <--> 2900 mV at 1800 mV
[ 0.640280] print_constraints: VUSB: 3300 mV
[ 0.640447] print_constraints: GPO1: 2750 mV
[ 0.640588] print_constraints: GPO2: 2750 mV
[ 0.640737] print_constraints: GPO3: 2750 mV
[ 0.640877] print_constraints: GPO4: 2750 mV
[ 0.641201] print_constraints: MC13892__PWGT1SPI: 5000 mV
[ 0.641508] print_constraints: MC13892__PWGT2SPI: 5000 mV
[ 0.641672] print_constraints: COINCELL: 3000 mV
[ 0.641857] spi_imx imx51-ecspi.0: probed
[ 0.641927] FEC Ethernet Driver
[ 0.642276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.642322] mxc-ehci mxc-ehci.0: initializing i.MX USB Controller
[ 0.674289] mxc-ehci mxc-ehci.0: Freescale On-Chip EHCI Host Controller
[ 0.674566] mxc-ehci mxc-ehci.0: new USB bus registered, assigned bus number 1
[ 0.704325] mxc-ehci mxc-ehci.0: irq 18, io mem 0x73f80000
[ 0.724299] mxc-ehci mxc-ehci.0: USB 2.0 started, EHCI 1.00
[ 0.724413] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.724427] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724439] usb usb1: Product: Freescale On-Chip EHCI Host Controller
[ 0.724449] usb usb1: Manufacturer: Linux 3.2.0-2-mx5 ehci_hcd
[ 0.724459] usb usb1: SerialNumber: mxc-ehci.0
[ 0.725033] hub 1-0:1.0: USB hub found
[ 0.725059] hub 1-0:1.0: 1 port detected
[ 0.725306] mxc-ehci mxc-ehci.1: initializing i.MX USB Controller
[ 0.804284] ULPI transceiver vendor/product ID 0x0424/0x0006
[ 0.804295] Found SMSC USB331x ULPI transceiver.
[ 0.804307] ULPI integrity check: passed.
[ 0.804324] mxc-ehci mxc-ehci.1: Freescale On-Chip EHCI Host Controller
[ 0.804580] mxc-ehci mxc-ehci.1: new USB bus registered, assigned bus number 2
[ 0.834310] mxc-ehci mxc-ehci.1: irq 14, io mem 0x73f80200
[ 0.854285] mxc-ehci mxc-ehci.1: USB 2.0 started, EHCI 1.00
[ 0.854362] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.854375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.854387] usb usb2: Product: Freescale On-Chip EHCI Host Controller
[ 0.854397] usb usb2: Manufacturer: Linux 3.2.0-2-mx5 ehci_hcd
[ 0.854407] usb usb2: SerialNumber: mxc-ehci.1
[ 0.854995] hub 2-0:1.0: USB hub found
[ 0.855018] hub 2-0:1.0: 1 port detected
[ 0.855628] mousedev: PS/2 mouse device common for all mice
[ 0.856537] mc13xxx-rtc mc13892-rtc: rtc core: registered mc13892-rtc as rtc0
[ 0.856805] Registered led device: efikamx:green
[ 0.856930] Registered led device: efikamx:red
[ 0.857046] Registered led device: efikamx:blue
[ 0.857861] usbcore: registered new interface driver usbhid
[ 0.857871] usbhid: USB HID core driver
[ 0.858586] TCP cubic registered
[ 0.858600] NET: Registered protocol family 17
[ 0.858646] Registering the dns_resolver key type
[ 0.858718] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 0.859793] registered taskstats version 1
[ 0.860194] regulator_init_complete: VCAM: disabling
[ 0.860411] regulator_init_complete: VAUDIO: disabling
[ 0.860626] regulator_init_complete: VVIDEO: disabling
[ 0.860841] regulator_init_complete: VSD: disabling
[ 0.861340] mc13xxx-rtc mc13892-rtc: setting system clock to 1970-01-01 06:10:43 UTC (22243)
[ 0.861395] Initializing network drop monitor service
[ 0.862259] Freeing init memory: 128K
[ 1.044750] usb 1-1: new high-speed USB device number 2 using mxc-ehci
[ 1.177302] imx-sdma imx35-sdma: firmware not found
[ 1.208287] usb 1-1: New USB device found, idVendor=0b95, idProduct=772a
[ 1.208308] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.208321] usb 1-1: Product: AX88x72A
[ 1.208330] usb 1-1: Manufacturer: ASIX Elec. Corp.
[ 1.208339] usb 1-1: SerialNumber: 123456
[ 1.324373] usb 2-1: new high-speed USB device number 2 using mxc-ehci
[ 1.474869] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.474889] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.474900] usb 2-1: Product: USB 2.0 Hub [MTT]
[ 1.477100] hub 2-1:1.0: USB hub found
[ 1.477455] hub 2-1:1.0: 4 ports detected
[ 1.666075] asix 1-1:1.0: eth0: register 'asix' at usb-mxc-ehci.0-1, ASIX AX88772 USB 2.0 Ethernet, 70:71:bc:4e:f7:57
[ 1.666224] usbcore: registered new interface driver asix
[ 1.754619] usb 2-1.1: new high-speed USB device number 3 using mxc-ehci
[ 1.883142] usb 2-1.1: New USB device found, idVendor=13d3, idProduct=3273
[ 1.883163] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.883175] usb 2-1.1: Product: 802.11 n WLAN
[ 1.883184] usb 2-1.1: Manufacturer: Ralink
[ 1.883193] usb 2-1.1: SerialNumber: 1.0
[ 1.957471] cfg80211: Calling CRDA to update world regulatory domain
[ 2.104601] usb 2-1.1: reset high-speed USB device number 3 using mxc-ehci
[ 2.270212] ieee80211 phy0: Failed to initialize wep: -2
[ 2.270253] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.271421] Registered led device: rt2800usb-phy0::radio
[ 2.271544] Registered led device: rt2800usb-phy0::assoc
[ 2.271660] Registered led device: rt2800usb-phy0::quality
[ 2.271757] usbcore: registered new interface driver rt2800usb
[ 6.953068] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 8.922650] usbcore: deregistering interface driver rt2800usb
[ 8.974833] cfg80211: Calling CRDA to update world regulatory domain
[ 9.094527] usb 2-1.1: reset high-speed USB device number 3 using mxc-ehci
[ 9.245319] ieee80211 phy0: Failed to initialize wep: -2
[ 9.245360] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.246515] Registered led device: rt2800usb-phy0::radio
[ 9.246648] Registered led device: rt2800usb-phy0::assoc
[ 9.246754] Registered led device: rt2800usb-phy0::quality
[ 9.246846] usbcore: registered new interface driver rt2800usb
[ 9.283969] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 15.299732] asix 1-1:1.0: eth0: link down
[ 16.964233] asix 1-1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 20.676232] asix 1-1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 614.942472] SCSI subsystem initialized
[ 614.948629] Initializing USB Mass Storage driver...
[ 614.949936] usbcore: registered new interface driver usb-storage
[ 614.949951] USB Mass Storage support registered.
now I plug in an extra usbstick:
[ 888.124436] usb 2-1.3: new high-speed USB device number 4 using mxc-ehci
[ 888.235250] usb 2-1.3: New USB device found, idVendor=0781, idProduct=5567
[ 888.235266] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 888.235278] usb 2-1.3: Product: Cruzer Blade
[ 888.235288] usb 2-1.3: Manufacturer: SanDisk
[ 888.235296] usb 2-1.3: SerialNumber: 200522434016897186D9
[ 888.245021] scsi0 : usb-storage 2-1.3:1.0
[ 889.245892] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.20 PQ: 0 ANSI: 5
~ # cat /var/log/syslog |grep -v 'kernel: \['
Jan 1 06:10:44 syslogd started: BusyBox v1.19.3
Jan 1 06:10:44 kernel: klogd started: BusyBox v1.19.3 (Debian 1:1.19.3-7)
Jan 1 06:10:45 net/hw-detect.hotplug: Detected hotpluggable network interface wlan0
Jan 1 06:10:46 init: starting pid 186, tty '': '/sbin/reopen-console /sbin/debian-installer'
Jan 1 06:10:46 init: starting pid 189, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog'
Jan 1 06:10:47 debconf: Setting debconf/language to en
Jan 1 06:10:47 main-menu[209]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 1 06:10:47 main-menu[209]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:10:47 main-menu[209]: INFO: Menu item 'ethdetect' selected
Jan 1 06:10:47 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Jan 1 06:10:47 net/hw-detect.hotplug: Detected hotpluggable network interface wlan0
Jan 1 06:10:48 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Jan 1 06:10:48 apt-install: Queueing package udev for later installation
Jan 1 06:10:48 apt-install: Queueing package usbutils for later installation
Jan 1 06:10:48 hw-detect: Missing modules 'usb-storage (USB storage)
Jan 1 06:10:49 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Jan 1 06:10:49 check-missing-firmware: failed to determine module from /sys/devices/platform/mxc_ahb/imx35-sdma
Jan 1 06:10:49 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing
Jan 1 06:10:51 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Jan 1 06:10:51 check-missing-firmware: failed to determine module from /sys/devices/platform/mxc_ahb/imx35-sdma
Jan 1 06:10:51 check-missing-firmware: missing firmware files (rt2870.bin) for rt2800usb
Jan 1 06:10:51 net/hw-detect.hotplug: Detected hotpluggable network interface wlan0
Jan 1 06:10:53 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
Jan 1 06:10:53 check-missing-firmware: failed to determine module from /sys/devices/platform/mxc_ahb/imx35-sdma
Jan 1 06:10:53 check-missing-firmware: missing firmware files (rt2870.bin) for rt2800usb
Jan 1 06:10:56 main-menu[209]: (process:233): realpath: /sys/devices/platform/mxc_ahb/imx35-sdma/driver/module: No such file or directory
Jan 1 06:10:56 main-menu[209]: (process:233): BusyBox v1.19.3 (Debian 1:1.19.3-7)
Jan 1 06:10:56 main-menu[209]: (process:233): multi-call binary.
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233): Usage:
Jan 1 06:10:56 main-menu[209]: (process:233): basename
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233): FILE [SUFFIX]
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233): ip: SIOCSIFFLAGS: No such file or directory
Jan 1 06:10:56 main-menu[209]: (process:233): realpath: /sys/devices/platform/mxc_ahb/imx35-sdma/driver/module: No such file or directory
Jan 1 06:10:56 main-menu[209]: (process:233): BusyBox v1.19.3 (Debian 1:1.19.3-7)
Jan 1 06:10:56 main-menu[209]: (process:233): multi-call binary.
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233): Usage:
Jan 1 06:10:56 main-menu[209]: (process:233): basename
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233): FILE [SUFFIX]
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233): /bin/check-missing-firmware: line 281: mountmedia: not found
Jan 1 06:10:56 main-menu[209]: (process:233): /bin/check-missing-firmware: line 281: mountmedia: not found
Jan 1 06:10:56 main-menu[209]: (process:233): ip: SIOCSIFFLAGS: No such file or directory
Jan 1 06:10:56 main-menu[209]: (process:233): realpath: /sys/devices/platform/mxc_ahb/imx35-sdma/driver/module: No such file or directory
Jan 1 06:10:56 main-menu[209]: (process:233): BusyBox v1.19.3 (Debian 1:1.19.3-7)
Jan 1 06:10:56 main-menu[209]: (process:233): multi-call binary.
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233): Usage:
Jan 1 06:10:56 main-menu[209]: (process:233): basename
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233): FILE [SUFFIX]
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: (process:233):
Jan 1 06:10:56 main-menu[209]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 1 06:10:56 main-menu[209]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:10:56 main-menu[209]: INFO: Menu item 'netcfg' selected
Jan 1 06:10:56 main-menu[209]: INFO: Falling back to the package description for crypto-modules-3.2.0-2-mx5-di
Jan 1 06:10:56 main-menu[209]: INFO: Falling back to the package description for crypto-modules-3.2.0-2-mx5-di
Jan 1 06:10:56 netcfg[496]: INFO: Starting netcfg v.1.70 (built 20111207-1619)
Jan 1 06:10:56 netcfg[496]: WARNING **: Couldn't read Wpasupplicant pid file, not trying to kill.
Jan 1 06:10:58 netcfg[496]: INFO: ethtool-lite: eth0 is disconnected.
Jan 1 06:10:58 netcfg[496]: INFO: ethtool-lite: eth0 is disconnected.
Jan 1 06:10:58 netcfg[496]: INFO: ethtool-lite: eth0 is disconnected.
Jan 1 06:10:58 netcfg[496]: INFO: ethtool-lite: eth0 is disconnected.
Jan 1 06:10:59 netcfg[496]: INFO: ethtool-lite: eth0 is disconnected.
Jan 1 06:10:59 netcfg[496]: INFO: ethtool-lite: eth0 is disconnected.
Jan 1 06:10:59 netcfg[496]: INFO: ethtool-lite: eth0 is connected.
Jan 1 06:10:59 netcfg[496]: INFO: found link on interface eth0, making it the default.
Jan 1 06:10:59 netcfg[496]: INFO: Could not find valid BOOTIF= entry in /proc/cmdline
Jan 1 06:11:00 netcfg[496]: WARNING **: Started DHCP client; PID is 510
Jan 1 06:11:03 udhcpc: Got IP 192.168.45.45 (using eth0) and routing through 192.168.45.254
Jan 1 06:11:03 netcfg[496]: DEBUG: dhcp_client_sigchld() called
Jan 1 06:11:03 netcfg[496]: DEBUG: Waiting for dhcp_pid = 510
Jan 1 06:11:05 netcfg[496]: DEBUG: dhcp_client_sigchld() called
Jan 1 06:11:05 netcfg[496]: INFO: DHCP hostname: "efikamx"
Jan 1 06:11:09 netcfg[496]: INFO: Detected eth0 as a hotpluggable device
Jan 1 06:11:09 netcfg[496]: DEBUG: dhcp_client_sigchld() called
Jan 1 06:11:09 main-menu[209]: (process:495): udhcpc (v1.19.3) started
Jan 1 06:11:09 main-menu[209]: (process:495): Sending discover...
Jan 1 06:11:09 main-menu[209]: (process:495): Sending discover...
Jan 1 06:11:09 main-menu[209]: (process:495): Sending discover...
Jan 1 06:11:09 main-menu[209]: (process:495): Sending select for 192.168.45.45...
Jan 1 06:11:09 main-menu[209]: (process:495): Lease of 192.168.45.45 obtained, lease time 43200
Jan 1 06:11:09 main-menu[209]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 1 06:11:09 main-menu[209]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:11:09 main-menu[209]: INFO: Menu item 'network-console' selected
Jan 1 06:14:20 sshd[562]: Server listening on 0.0.0.0 port 22.
Jan 1 06:14:20 apt-install: Queueing package openssh-server for later installation
Jan 1 06:14:21 main-menu[209]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 1 06:14:21 main-menu[209]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:14:21 main-menu[209]: INFO: Menu item 'choose-mirror' selected
Jan 1 06:14:21 anna-install: Queueing udeb apt-mirror-setup for later installation
Jan 1 06:14:25 main-menu[209]: INFO: Menu item 'choose-mirror' succeeded but requested to be left unconfigured.
Jan 1 06:14:25 main-menu[209]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 1 06:14:25 main-menu[209]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:14:40 main-menu[209]: INFO: Menu item 'choose-mirror' selected
Jan 1 06:14:46 main-menu[209]: INFO: Menu item 'choose-mirror' succeeded but requested to be left unconfigured.
Jan 1 06:14:46 main-menu[209]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 1 06:14:46 main-menu[209]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:14:58 sshd[647]: WARNING: /etc/ssh/moduli does not exist, using fixed modulus
Jan 1 06:15:00 sshd[647]: Failed publickey for installer from 192.168.45. port 59712 ssh2
Jan 1 06:15:00 sshd[647]: Failed keyboard-interactive for installer from 192.168.45. port 59712 ssh2
Jan 1 06:15:02 sshd[647]: Accepted password for installer from 192.168.45. port 59712 ssh2
Jan 1 06:15:02 sshd[650]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jan 1 06:15:02 sshd[650]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jan 1 06:15:02 debconf: Setting debconf/language to en
Jan 1 06:15:28 debconf: Setting debconf/language to en
Jan 1 06:15:28 main-menu[663]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 1 06:15:28 main-menu[663]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:15:28 main-menu[663]: INFO: Menu item 'choose-mirror' selected
Jan 1 06:15:43 choose-mirror[692]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/oldstable/Release -O - | grep -E '^(Suite|Codename):'
Jan 1 06:15:44 choose-mirror[692]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/stable/Release -O - | grep -E '^(Suite|Codename):'
Jan 1 06:15:44 choose-mirror[692]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/squeeze/Release -O - | grep -E '^(Suite|Codename):'
Jan 1 06:15:44 choose-mirror[692]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/testing/Release -O - | grep -E '^(Suite|Codename):'
Jan 1 06:15:44 choose-mirror[692]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/wheezy/Release -O - | grep -E '^(Suite|Codename):'
Jan 1 06:15:44 choose-mirror[692]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/unstable/Release -O - | grep -E '^(Suite|Codename):'
Jan 1 06:15:44 choose-mirror[692]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/sid/Release -O - | grep -E '^(Suite|Codename):'
Jan 1 06:15:45 choose-mirror[692]: INFO: suite/codename set to: unstable/sid
Jan 1 06:15:45 choose-mirror[692]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/sid/main/binary-armhf/Release -O - | grep ^Architecture:
Jan 1 06:15:45 anna-install: Queueing udeb sid-support for later installation
Jan 1 06:15:45 main-menu[663]: (process:686): wget: server returned error: HTTP/1.0 404 Not Found
Jan 1 06:15:45 main-menu[663]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 1 06:15:45 main-menu[663]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:15:45 main-menu[663]: INFO: Menu item 'download-installer' selected
Jan 1 06:15:45 net-retriever: gpgv:
Jan 1 06:15:45 net-retriever: Signature made Mon May 28 14:23:59 2012 UTC using RSA key ID 473041FA
Jan 1 06:15:45 net-retriever: gpgv:
Jan 1 06:15:45 net-retriever: key 473041FA was created 1282918078 seconds in the future (time warp or clock problem)
Jan 1 06:15:45 net-retriever: gpgv:
Jan 1 06:15:45 net-retriever: key 473041FA was created 1282918078 seconds in the future (time warp or clock problem)
Jan 1 06:15:45 net-retriever: gpgv:
Jan 1 06:15:45 net-retriever: key 473041FA was created 1282918078 seconds in the future (time warp or clock problem)
Jan 1 06:15:45 net-retriever: gpgv:
Jan 1 06:15:45 net-retriever: Good signature from "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster@debian.org>"
Jan 1 06:15:45 net-retriever:
Jan 1 06:15:46 anna[748]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:15:46 anna[748]: DEBUG: resolver (ufsutils-udeb): package doesn't exist (ignored)
Jan 1 06:15:46 anna[748]: DEBUG: resolver (ufs-modules): package doesn't exist (ignored)
Jan 1 06:15:46 anna[748]: DEBUG: resolver (xfs-modules): package doesn't exist (ignored)
Jan 1 06:15:46 anna[748]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:15:46 anna[748]: DEBUG: resolver (ufsutils-udeb): package doesn't exist (ignored)
Jan 1 06:15:46 anna[748]: DEBUG: resolver (ufs-modules): package doesn't exist (ignored)
Jan 1 06:15:46 anna[748]: DEBUG: resolver (xfs-modules): package doesn't exist (ignored)
Jan 1 06:15:46 anna[748]: DEBUG: retrieving apt-mirror-setup 1:0.56
Jan 1 06:15:46 anna[748]: DEBUG: retrieving apt-setup-udeb 1:0.56
Jan 1 06:15:47 anna[748]: DEBUG: retrieving base-installer 1.123
Jan 1 06:15:47 anna[748]: DEBUG: retrieving bootstrap-base 1.123
Jan 1 06:15:48 anna[748]: DEBUG: retrieving btrfs-tools-udeb 0.19+20120328-1
Jan 1 06:15:48 anna[748]: DEBUG: retrieving clock-setup 0.110
Jan 1 06:15:49 anna[748]: DEBUG: retrieving di-utils-mapdevfs 1.89
Jan 1 06:15:49 anna[748]: DEBUG: retrieving debootstrap-udeb 1.0.40
Jan 1 06:15:49 anna[748]: DEBUG: retrieving e2fsprogs-udeb 1.42.2-2
Jan 1 06:15:50 anna[748]: DEBUG: retrieving libc6-udeb 2.13-32
Jan 1 06:15:50 anna[748]: DEBUG: retrieving finish-install 2.34
Jan 1 06:15:51 anna[748]: DEBUG: retrieving disk-detect 1.88
Jan 1 06:15:51 anna[748]: DEBUG: retrieving jfsutils-udeb 1.1.15-2
Jan 1 06:15:52 anna[748]: DEBUG: retrieving kickseed-common 0.57
Jan 1 06:15:52 anna[748]: DEBUG: retrieving libkmod2-udeb 8-2
Jan 1 06:15:52 anna[748]: DEBUG: retrieving libbsd0-udeb 0.3.0-2
Jan 1 06:15:52 anna[748]: DEBUG: retrieving btrfs-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:52 anna[748]: DEBUG: retrieving core-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:52 anna[748]: DEBUG: retrieving crc-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:53 anna[748]: DEBUG: retrieving ext2-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:53 anna[748]: DEBUG: retrieving ext3-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:53 anna[748]: DEBUG: retrieving ext4-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:53 anna[748]: DEBUG: retrieving fat-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:53 anna[748]: DEBUG: retrieving isofs-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:53 anna[748]: DEBUG: retrieving jfs-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:54 anna[748]: DEBUG: retrieving loop-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:54 anna[748]: DEBUG: retrieving md-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:54 anna[748]: DEBUG: retrieving nic-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:54 anna[748]: DEBUG: retrieving nic-shared-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:54 anna[748]: DEBUG: retrieving nic-usb-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:55 anna[748]: DEBUG: retrieving scsi-core-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:55 anna[748]: DEBUG: retrieving usb-storage-modules-3.2.0-2-mx5-di 3.2.17-1
Jan 1 06:15:55 anna[748]: DEBUG: retrieving localechooser 2.40
Jan 1 06:15:56 anna[748]: DEBUG: retrieving libdevmapper1.02.1-udeb 2:1.02.67-2+b1
Jan 1 06:15:56 anna[748]: DEBUG: retrieving mdadm-udeb 3.2.3-2
Jan 1 06:15:56 anna[748]: DEBUG: retrieving nobootloader 1.32
Jan 1 06:15:57 anna[748]: DEBUG: retrieving libparted0-udeb 2.3-9.1
Jan 1 06:15:57 anna[748]: DEBUG: retrieving partman-auto 101
Jan 1 06:15:58 anna[748]: DEBUG: retrieving partman-auto-raid 20
Jan 1 06:15:59 anna[748]: DEBUG: retrieving partman-base 153
Jan 1 06:16:00 anna[748]: DEBUG: retrieving partman-utils 153
Jan 1 06:16:00 anna[748]: DEBUG: retrieving partman-basicfilesystems 71
Jan 1 06:16:02 anna[748]: DEBUG: retrieving partman-basicmethods 49
Jan 1 06:16:03 anna[748]: DEBUG: retrieving partman-btrfs 8
Jan 1 06:16:04 anna[748]: DEBUG: retrieving partman-ext3 67
Jan 1 06:16:05 anna[748]: DEBUG: retrieving partman-jfs 35
Jan 1 06:16:06 anna[748]: DEBUG: retrieving partman-md 58
Jan 1 06:16:07 anna[748]: DEBUG: retrieving partman-partitioning 85
Jan 1 06:16:09 anna[748]: DEBUG: retrieving partman-target 77
Jan 1 06:16:10 anna[748]: DEBUG: retrieving partman-ufs 9
Jan 1 06:16:11 anna[748]: DEBUG: retrieving partman-xfs 49
Jan 1 06:16:13 anna[748]: DEBUG: retrieving pciutils-udeb 1:3.1.9-3
Jan 1 06:16:13 anna[748]: DEBUG: retrieving libpcre3-udeb 1:8.30-5
Jan 1 06:16:13 anna[748]: DEBUG: retrieving pkgsel 0.35
Jan 1 06:16:14 anna[748]: DEBUG: retrieving rdate-udeb 1:1.2-4
Jan 1 06:16:14 anna[748]: DEBUG: retrieving tzsetup-udeb 1:0.35
Jan 1 06:16:16 anna[748]: DEBUG: retrieving user-setup-udeb 1.42
Jan 1 06:16:17 anna[748]: DEBUG: retrieving wpasupplicant-udeb 1.0-2
Jan 1 06:16:17 anna[748]: DEBUG: retrieving xfsprogs-udeb 3.1.7
Jan 1 06:16:20 main-menu[663]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:16:20 main-menu[663]: INFO: Menu item 'localechooser' selected
Jan 1 06:16:21 debconf: Setting debconf/language to en
Jan 1 06:20:35 localechooser: info: Language = 'en'
Jan 1 06:20:35 localechooser: info: line=en;0;US;en_US.UTF-8;;console-setup
Jan 1 06:20:35 localechooser: info: Set debian-installer/language = 'en'
Jan 1 06:20:35 localechooser: info: Default country = 'US'
Jan 1 06:20:35 localechooser: info: Default locale = 'en_US.UTF-8'
Jan 1 06:20:35 localechooser: info: Set debian-installer/consoledisplay = 'console-setup'
Jan 1 06:20:35 debconf: Setting debconf/language to en
Jan 1 06:20:36 localechooser: info: Set debian-installer/country = 'US'
Jan 1 06:20:37 localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Jan 1 06:20:37 localechooser: info: System locale (debian-installer/locale) = 'en_US.UTF-8'
Jan 1 06:20:38 main-menu[663]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:20:38 main-menu[663]: INFO: Menu item 'user-setup-udeb' selected
Jan 1 06:20:52 main-menu[663]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Jan 1 06:20:53 main-menu[663]: INFO: Menu item 'clock-setup' selected
May 28 16:41:20 clock-setup: Mon May 28 16:41:20 UTC 2012
May 28 16:41:20 clock-setup: rdate: adjust local clock by 1338200427.414357 seconds
May 28 16:41:23 main-menu[663]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
May 28 16:41:23 main-menu[663]: INFO: Menu item 'disk-detect' selected
May 28 16:41:24 anna-install: Installing mmc-modules
May 28 16:41:24 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
May 28 16:41:24 net/hw-detect.hotplug: Detected hotpluggable network interface wlan0
May 28 16:41:24 net/hw-detect.hotplug: Detected hotpluggable network interface lo
May 28 16:41:24 hw-detect: Detected module 'usb-storage' for 'USB storage'
May 28 16:41:25 hw-detect: insmod /lib/modules/3.2.0-2-mx5/kernel/drivers/scsi/scsi_mod.ko
May 28 16:41:25 hw-detect: insmod /lib/modules/3.2.0-2-mx5/kernel/drivers/usb/storage/usb-storage.ko
May 28 16:41:26 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping
May 28 16:41:26 check-missing-firmware: failed to determine module from /sys/devices/platform/mxc_ahb/imx35-sdma
May 28 16:41:26 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing
May 28 16:45:22 main-menu[663]: (process:3058): realpath: /sys/devices/platform/mxc_ahb/imx35-sdma/driver/module: No such file or directory
May 28 16:45:22 main-menu[663]: (process:3058): BusyBox v1.19.3 (Debian 1:1.19.3-7)
May 28 16:45:22 main-menu[663]: (process:3058): multi-call binary.
May 28 16:45:22 main-menu[663]: (process:3058):
May 28 16:45:22 main-menu[663]: (process:3058): Usage:
May 28 16:45:22 main-menu[663]: (process:3058): basename
May 28 16:45:22 main-menu[663]: (process:3058):
May 28 16:45:22 main-menu[663]: (process:3058): FILE [SUFFIX]
May 28 16:45:22 main-menu[663]: (process:3058):
May 28 16:45:22 main-menu[663]: (process:3058):
May 28 16:45:22 main-menu[663]: INFO: Menu item 'disk-detect' succeeded but requested to be left unconfigured.
May 28 16:45:24 main-menu[663]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
May 28 16:45:27 main-menu[663]: INFO: Menu item 'di-utils-shell' selected
Will now try sid images and report back.
cheers,
Holger
Reply to: