Package: installation-reports Boot method: CD Image version: http://cdimage.debian.org/debian-cd/6.0.4/i386/iso-cd/debian-6.0.4-i386-businesscard.iso Date: Today, during the past couple hours. 3:15 AM CST Machine: Just some old beige box. Processor: Intel® Pentium(R) 4 CPU 1.60GHz Memory: This Ubuntu Live cd is reporting 748.2 MB, which seems like an odd number Partitions: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006196c Device Boot Start End Blocks Id System /dev/sda1 * 2048 75141119 37569536 83 Linux /dev/sda2 75143166 78163967 1510401 5 Extended /dev/sda5 75143168 78163967 1510400 82 Linux swap / Solaris Output of lspci -knn (or lspci -nn): 00:00.0 Host bridge [0600]: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge [8086:1a30] (rev 04) Subsystem: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge [8086:1a30] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge [8086:1a31] (rev 04) Kernel modules: shpchp 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 05) Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 05) Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 05) Subsystem: Intel Corporation Device [8086:2442] Kernel driver in use: ata_piix 00:1f.2 USB controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442] (rev 05) Subsystem: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442] Kernel driver in use: uhci_hcd 00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller [8086:2443] (rev 05) Subsystem: Intel Corporation Device [8086:2442] Kernel modules: i2c-i801 00:1f.4 USB controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2444] (rev 05) Subsystem: Intel Corporation Device [8086:2442] Kernel driver in use: uhci_hcd 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio Controller [8086:2445] (rev 05) Subsystem: Analog Devices Device [11d4:5360] Kernel driver in use: snd_intel8x0 Kernel modules: snd-intel8x0 02:04.0 VGA compatible controller [0300]: NVIDIA Corporation NV34 [GeForce FX 5500] [10de:0326] (rev a1) Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:05.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone] [10b7:9055] (rev 30) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055] Kernel driver in use: 3c59x Kernel modules: 3c59x 02:0a.0 Communication controller [0780]: Conexant Systems, Inc. HCF 56k Data/Fax/Voice/Spkp Modem [14f1:1036] (rev 08) Subsystem: Conexant Systems, Inc. HCF 56k Data/Fax/Voice/Spkp Modem [14f1:1036] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ O ] Detect network card: [ O ] Configure network: [ O ] Detect CD: [ O ] Load installer modules: [ O ] Detect hard drives: [ O ] Partition hard drives: [ O ] Install base system: [ O ] Clock/timezone setup: [ O ] User/password setup: [ O ] Install tasks: [ E ] Install boot loader: [ E ] Overall install: [ E ] Comments/Problems: The install fails when it tries to set up the additional software. Grub and lilo both give errors, as well. I've tared the logs for later review.
Attachment:
install.tar.gz
Description: GNU Zip compressed data