Bug#642574: bug report
Package: installation-reports
Boot method: USB
Image version: http://cdimage.debian.org/debian-cd/6.0.2.1/i386/iso-cd/debian-6.0.2.1-i386-CD-1.iso
Date: 21/Sept/2011 20 hrs.
Machine: Compaq Mini CQ10
Processor: Intel(R) Atom(TM) CPU N270 @1.60GHz
Memory: 2gb
Partitions:
major minor #blocks name
8 0 156290904 sda
8 1 98508800 sda1
8 2 49548288 sda2
8 3 1 sda3
8 4 2087936 sda4
8 5 6142976 sda5
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: i915
Kernel modules: intelfb, i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:1468]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel modules: leds-ss4200, iTCO_wdt, intel-rng
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1468]
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1508]
Kernel driver in use: wl
Kernel modules: wl, ssb
02:00.0 Ethernet controller [0200]: Atheros Communications AR8132 Fast Ethernet [1969:1062] (rev c0)
Subsystem: Hewlett-Packard Company Device [103c:308f]
Kernel driver in use: atl1c
Kernel modules: atl1c
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [0]
Detect network card: [0]
Configure network: [0]
Detect CD: [0]
Load installer modules: [0]
Detect hard drives: [E]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
The problem is that when the installer says 'loading partitioner' and below the progress bar says 'scanning disks', it gets stuck at 50%.
--
Osvaldo.
Reply to: