[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#516911: marked as done (Wrong kernel installed at K7 architecture)

Your message dated Mon, 20 Jun 2011 11:45:05 +0200
with message-id <4DFF16A1.8070103@yahoo.de>
and subject line Lenny no more installed on this computer
has caused the Debian Bug report #516911,
regarding Wrong kernel installed at K7 architecture
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
516911: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516911
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: CD
Image version: Self-made boot CD with Lenny Debian Installer 5.0.0
Date: 2009-02-23

Machine: Self-made Desktop PC
Processor: AMD Duron 800MHz
Memory: 256MB
Partitions: <df -Tl will do; the raw partition table is preferred>

> Dateisystem   Typ    1K‐Blöcke   Benutzt Verfügbar Ben% Eingehängt auf
> /dev/hda1     ext3     1921156    635360   1188204  35% /
> tmpfs        tmpfs      128284         4    128280   1% /lib/init/rw
> udev         tmpfs       10240        84     10156   1% /dev
> tmpfs        tmpfs      128284         0    128284   0% /dev/shm
> /dev/hda5      xfs    77443576  26133228  51310348  34% /storage1
> /dev/hdb5      xfs   244076732 160107184  83969548  66% /storage2

Output of lspci -knn:

> 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 735 Host [1039:0735] (rev 01)
> 	Kernel driver in use: agpgart-sis
> 	Kernel modules: sis-agp
> 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) [1039:0001]
> 	Kernel modules: shpchp
> 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0018]
> 	Kernel modules: i2c-sis630
> 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016]
> 	Kernel driver in use: sis96x_smbus
> 	Kernel modules: i2c-sis96x
> 00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07)
> 	Kernel driver in use: ohci_hcd
> 	Kernel modules: ohci-hcd
> 00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07)
> 	Kernel driver in use: ohci_hcd
> 	Kernel modules: ohci-hcd
> 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev d0)
> 	Kernel driver in use: SIS_IDE
> 	Kernel modules: sis5513
> 00:0f.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI [1814:0201] (rev 01)
> 	Kernel driver in use: rt2500pci
> 	Kernel modules: rt2500pci
> 00:11.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
> 	Kernel driver in use: r8169
> 	Kernel modules: r8169
> 00:13.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 50)
> 	Kernel driver in use: uhci_hcd
> 	Kernel modules: uhci-hcd
> 00:13.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 50)
> 	Kernel driver in use: uhci_hcd
> 	Kernel modules: uhci-hcd
> 00:13.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 51)
> 	Kernel driver in use: ehci_hcd
> 	Kernel modules: ehci-hcd
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128 RF/SG AGP [1002:5246]
> 	Kernel modules: aty128fb

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [E]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

The used architecture is a K7 architecture (AMD Duron 800MHz).
The kernel has to be the 686 image.
But there is the 486 image installed.

Regards
Bernhard

--- End Message ---
--- Begin Message --- 
As described, Lenny is no more installed on this computer.

--- End Message ---
Reply to: