Bug#629842: Kernel BUG in ext3 filesystem creation
Dnia 2011-06-08, śro o godzinie 15:41 -0400, Daniel Richard G. pisze:
> Package: installation-reports
>
> Boot method: hard disk (netboot kernel + initrd) via grub
> Image version: 20110106+squeeze1 (files are dated 2011-03-14)
>
> Machine: Dell Dimension 2350
> Processor: Intel(R) Pentium(R) 4 CPU 2.20GHz
> Memory: 1GB
> Partitions: ("fdisk -l" output below)
>
> Disk /dev/sda: 120.0 GB, 120034123776 bytes
> 255 heads, 63 sectors/track, 14593 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disk identifier: 0x0ea91612
>
> Device Boot Start End Blocks Id System
> /dev/sda1 1 9 72261 6 FAT16
> /dev/sda2 10 14593 117145949+ 5 Extended
> /dev/sda5 10 141 1060258+ 82 Linux swap
> /dev/sda6 142 795 5253223+ 83 Linux
> /dev/sda7 * 796 1840 8393931 83 Linux
> /dev/sda8 1841 14593 102438441 83 Linux
>
> Output of lspci -knn (or lspci -nn): (see attached)
>
> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>
> Initial boot: [O]
> Detect network card: [O]
> Configure network: [O]
> Detect CD: [ ]
> Load installer modules: [O]
> Detect hard drives: [O]
> Partition hard drives: [O]
> Install base system: [ ]
> Clock/timezone setup: [ ]
> User/password setup: [ ]
> Install tasks: [ ]
> Install boot loader: [ ]
> Overall install: [E]
>
> Comments/Problems:
>
> Everything worked fine up to the point of creating the root ext3
> filesystem. Then a kernel BUG occurred, and the installer remained stuck
> at a blue screen (with white underbar). The system is still responsive;
> I can switch to the other terminals and poke around, but the installer
> is horked.
>
> The console log, recorded via serial cable, is attached.
>
> Note that this error does not occur with testing/unstable installers.
Did You checked this hdd for bad sectors? Check SMART first if possible.
PS. Why 486 kernel instead 686?
Reply to: