--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: raid1 and lvm as root-fs doesn't work with d-i: not fully bootable
- From: Johannes Wiedersich <johannes@physik.blm.tu-muenchen.de>
- Date: Fri, 15 Dec 2006 18:45:34 +0100
- Message-id: <20061215174534.28228.80671.reportbug@sms2.physik.blm.tu-muenchen.de>
Package: installation-reports
Version: 2.23
Severity: wishlist
- setting up two 500 GB disks as raid1
- configuring the raid for lvm
- setting up lvm for the required partitions
Setup and installation went very nice. It installed lilo.
On reboot the kernel booted partially, leading to a busybox console. I don't know how I could have
proceeded from there, so I restarted installation and put root and swap on partitions seperate
from the raid. (This time grub was installed as default.)
That was quite expected from the warning in the installation guide, p.
55. Nevertheless it would be nice to be able to use raid and lvm for the
root partition. It appears there is not a lot missing, since it almost managed to boot.
Apart from that the installation was thankfully uneventful and smooth. The partitioning guide is
very straightforeward and easy to use; much better than the last time I set up a raid :-)
The installation guide is in rather good shape and offers a lot of usefull information!
Thanks!!!!
Johannes
-- Package-specific info:
Boot method: cd
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso, from today
Date: 2006/12/15 14:00 GMT
Machine: workstation with asus p5gd2 mb
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 19228276 3849108 14402420 22% /
tmpfs tmpfs 1030580 0 1030580 0% /lib/init/rw
udev tmpfs 10240 72 10168 1% /dev
tmpfs tmpfs 1030580 0 1030580 0% /dev/shm
/dev/mapper/lpw-archiv
ext3 305705200 195552 289980688 1% /archiv
/dev/mapper/lpw-home
ext3 154818540 195404 146758816 1% /home
/dev/sdb1 ext3 19228276 176200 18075328 1% /rootsicher
sms2:~# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 2432 19535008+ 83 Linux
/dev/sda2 2433 2554 979965 82 Linux swap / Solaris
/dev/sda3 2555 60801 467869027+ fd Linux raid autodetect
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 2432 19535008+ 83 Linux
/dev/sdb2 2433 2554 979965 82 Linux swap / Solaris
/dev/sdb3 2555 60801 467869027+ fd Linux raid autodetect
Disk /dev/md0: 479.0 GB, 479097782272 bytes
2 heads, 4 sectors/track, 116967232 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md0 doesn't contain a valid partition table
Disk /dev/dm-0: 161.0 GB, 161061273600 bytes
255 heads, 63 sectors/track, 19581 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 318.0 GB, 318033100800 bytes
255 heads, 63 sectors/track, 38665 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-1 doesn't contain a valid partition table
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [2]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Initial boot went fine when / is not part of the raid. [E] refers to / being part of the
raid1/lvm.
I would appreciate, if tasksel would allow to select gnome and/or kde as desktop (ie. offer both).
The installer offered two ethernet connectors. However there appears to be only one
activated/usable on my system. The second one in the list (eth1) worked.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20061214-22:52)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux sms2 2.6.18-3-amd64 #1 SMP Sun Dec 10 19:57:44 CET 2006 x86_64 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 04)
lspci -nn: 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 03)
lspci -nn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
lspci -nn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03)
lspci -nn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller [8086:2652] (rev 03)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
lspci -nn: 01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88W8310 and 88W8000G [Libertas] 802.11g client chipset [11ab:1fa7] (rev 07)
lspci -nn: 01:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
lspci -nn: 01:04.0 Mass storage controller [0180]: <pci_lookup_name: buffer too small> (rev 13)
lspci -nn: 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 15)
lspci -nn: 04:00.0 VGA compatible controller [0300]: nVidia Corporation NV43 [GeForce 6200] [10de:014f] (rev a2)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
lspci -vnn: Subsystem: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 04)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
lspci -vnn: I/O behind bridge: 0000e000-0000efff
lspci -vnn: Memory behind bridge: d2f00000-d7ffffff
lspci -vnn: Prefetchable memory behind bridge: d8000000-dfffffff
lspci -vnn: Capabilities: [88] Subsystem: Intel Corporation Unknown device [8086:0000]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn: Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [a0] Express Root Port (Slot+) IRQ 0
lspci -vnn:
lspci -vnn: 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 03)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:813d]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 10
lspci -vnn: Memory at d2cf4000 (64-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [70] Express Unknown type IRQ 0
lspci -vnn:
lspci -vnn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
lspci -vnn: I/O behind bridge: 0000d000-0000dfff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -vnn: I/O behind bridge: 0000c000-0000cfff
lspci -vnn: Memory behind bridge: d2e00000-d2efffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80a6]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: I/O ports at 7000 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80a6]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 225
lspci -vnn: I/O ports at 7400 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80a6]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -vnn: I/O ports at 7800 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80a6]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: I/O ports at 8000 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80a6]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -vnn: Memory at d2cff800 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Debug port
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3) (prog-if 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -vnn: I/O behind bridge: 0000a000-0000bfff
lspci -vnn: Memory behind bridge: d2d00000-d2dfffff
lspci -vnn: Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
lspci -vnn: Capabilities: [50] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80a6]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at ffa0 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller [8086:2652] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:2601]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 225
lspci -vnn: I/O ports at 9800 [size=8]
lspci -vnn: I/O ports at 9400 [size=4]
lspci -vnn: I/O ports at 9000 [size=8]
lspci -vnn: I/O ports at 8800 [size=4]
lspci -vnn: I/O ports at 8400 [size=16]
lspci -vnn: Memory at d2cffc00 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [70] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80a6]
lspci -vnn: Flags: medium devsel
lspci -vnn: I/O ports at 0400 [size=32]
lspci -vnn:
lspci -vnn: 01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88W8310 and 88W8000G [Libertas] 802.11g client chipset [11ab:1fa7] (rev 07)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:138f]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 6
lspci -vnn: Memory at d2dc0000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: Memory at d2db0000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 01:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:808b]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 50
lspci -vnn: Memory at d2ddf800 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: Memory at d2dd8000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 01:04.0 Mass storage controller [0180]: <pci_lookup_name: buffer too small> (rev 13)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:813a]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 217
lspci -vnn: I/O ports at b800 [size=8]
lspci -vnn: I/O ports at b400 [size=4]
lspci -vnn: I/O ports at b000 [size=8]
lspci -vnn: I/O ports at a800 [size=4]
lspci -vnn: I/O ports at a400 [size=16]
lspci -vnn: Expansion ROM at 88000000 [disabled] [size=128K]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 15)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8142]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 58
lspci -vnn: Memory at d2efc000 (64-bit, non-prefetchable) [size=16K]
lspci -vnn: I/O ports at c800 [size=256]
lspci -vnn: Expansion ROM at d2ec0000 [disabled] [size=128K]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Vital Product Data
lspci -vnn: Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [e0] Express Legacy Endpoint IRQ 0
lspci -vnn:
lspci -vnn: 04:00.0 VGA compatible controller [0300]: nVidia Corporation NV43 [GeForce 6200] [10de:014f] (rev a2)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:819e]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 10
lspci -vnn: Memory at d4000000 (32-bit, non-prefetchable) [size=64M]
lspci -vnn: Memory at d8000000 (64-bit, prefetchable) [size=128M]
lspci -vnn: Memory at d3000000 (64-bit, non-prefetchable) [size=16M]
lspci -vnn: Expansion ROM at d2fe0000 [disabled] [size=128K]
lspci -vnn: Capabilities: [60] Power Management version 2
lspci -vnn: Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [78] Express Endpoint IRQ 0
lspci -vnn:
lsmod: Module Size Used by
lsmod: qnx4 16840 0
lsmod: ntfs 190728 0
lsmod: dm_mod 62800 5
lsmod: raid456 122912 0
lsmod: xor 10384 1 raid456
lsmod: raid1 26880 1
lsmod: raid0 12032 0
lsmod: md_mod 82844 4 raid456,raid1,raid0
lsmod: xfs 485192 0
lsmod: reiserfs 231168 0
lsmod: jfs 166992 0
lsmod: ext3 138256 4
lsmod: jbd 65392 1 ext3
lsmod: mbcache 14216 1 ext3
lsmod: vfat 17792 0
lsmod: fat 55984 1 vfat
lsmod: sky2 46212 0
lsmod: eth1394 24840 0
lsmod: nls_iso8859_1 9472 0
lsmod: sbp2 28296 0
lsmod: isofs 39396 0
lsmod: ide_disk 20352 0
lsmod: ide_generic 5632 0 [permanent]
lsmod: triflex 8448 0 [permanent]
lsmod: cy82c693 9096 0 [permanent]
lsmod: cmd64x 15308 0 [permanent]
lsmod: slc90e66 10112 0 [permanent]
lsmod: via82cxxx 13188 0 [permanent]
lsmod: ns87415 8904 0 [permanent]
lsmod: siimage 16640 0 [permanent]
lsmod: sis5513 18192 0 [permanent]
lsmod: alim15x3 16152 0 [permanent]
lsmod: pdc202xx_old 14848 0 [permanent]
lsmod: cs5530 9984 0 [permanent]
lsmod: amd74xx 19248 0 [permanent]
lsmod: serverworks 13456 0 [permanent]
lsmod: opti621 9220 0 [permanent]
lsmod: trm290 8836 0 [permanent]
lsmod: rz1000 7296 0 [permanent]
lsmod: cs5520 9472 0 [permanent]
lsmod: hpt34x 9856 0 [permanent]
lsmod: sc1200 11520 0 [permanent]
lsmod: pdc202xx_new 13312 0 [permanent]
lsmod: aec62xx 12288 0 [permanent]
lsmod: atiixp 10768 0 [permanent]
lsmod: usb_storage 86848 0
lsmod: vga16fb 16280 2
lsmod: vgastate 12416 1 vga16fb
lsmod: usbserial 38640 0
lsmod: usbkbd 11776 0
lsmod: thermal 19984 0
lsmod: processor 37608 1 thermal
lsmod: fan 9608 0
lsmod: sd_mod 25600 8
lsmod: ide_cd 44704 0
lsmod: cdrom 40104 1 ide_cd
lsmod: ata_piix 19592 0
lsmod: piix 15236 0 [permanent]
lsmod: it821x 12932 0 [permanent]
lsmod: ohci1394 37704 0
lsmod: ieee1394 361208 3 eth1394,sbp2,ohci1394
lsmod: parport_pc 41256 0
lsmod: parport 44044 1 parport_pc
lsmod: ahci 24324 6
lsmod: generic 10500 0 [permanent]
lsmod: ide_core 146816 29 ide_disk,ide_generic,triflex,cy82c693,cmd64x,slc90e66,via82cxxx,ns87415,siimage,sis5513,alim15x3,pdc202xx_old,cs5530,amd74xx,serverworks,opti621,trm290,rz1000,cs5520,hpt34x,sc1200,pdc202xx_new,aec62xx,atiixp,usb_storage,ide_cd,piix,it821x,generic
lsmod: libata 106272 2 ata_piix,ahci
lsmod: scsi_mod 151984 5 sbp2,usb_storage,sd_mod,ahci,libata
lsmod: ehci_hcd 35720 0
lsmod: uhci_hcd 28176 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 1030580 432 1030148 0% /dev
df: tmpfs 1030580 432 1030148 0% /dev
df: tmpfs 1030580 432 1030148 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part1 19228276 745404 17506124 4% /target
df: /dev/mapper/lpw-archiv 305705200 195552 289980688 0% /target/archiv
df: /dev/mapper/lpw-home 154818540 192088 146762132 0% /target/home
df: /dev/scsi/host1/bus0/target0/lun0/part1 19228276 176200 18075328 1% /target/rootsicher
free: total used free shared buffers
free: Mem: 2061164 740172 1320992 0 27408
free: Swap: 1959912 0 1959912
free: Total: 4021076 740172 3280904
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 4
/proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: cpu MHz : 3010.739
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 1
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 5
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl est cid cx16 xtpr
/proc/cpuinfo: bogomips : 6026.75
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 128
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 4
/proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: cpu MHz : 3010.739
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 1
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 5
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl est cid cx16 xtpr
/proc/cpuinfo: bogomips : 6021.77
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 128
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0077 : rtc
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0290-0297 : pnp 00:07
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0400-041f : 0000:00:1f.3
/proc/ioports: 0480-04bf : 0000:00:1f.0
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0800-087f : 0000:00:1f.0
/proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK
/proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK
/proc/ioports: 0808-080b : ACPI PM_TMR
/proc/ioports: 0810-0815 : ACPI CPU throttle
/proc/ioports: 0828-082f : ACPI GPE0_BLK
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 7000-701f : 0000:00:1d.0
/proc/ioports: 7000-701f : uhci_hcd
/proc/ioports: 7400-741f : 0000:00:1d.1
/proc/ioports: 7400-741f : uhci_hcd
/proc/ioports: 7800-781f : 0000:00:1d.2
/proc/ioports: 7800-781f : uhci_hcd
/proc/ioports: 8000-801f : 0000:00:1d.3
/proc/ioports: 8000-801f : uhci_hcd
/proc/ioports: 8400-840f : 0000:00:1f.2
/proc/ioports: 8400-840f : ahci
/proc/ioports: 8800-8803 : 0000:00:1f.2
/proc/ioports: 8800-8803 : ahci
/proc/ioports: 9000-9007 : 0000:00:1f.2
/proc/ioports: 9000-9007 : ahci
/proc/ioports: 9400-9403 : 0000:00:1f.2
/proc/ioports: 9400-9403 : ahci
/proc/ioports: 9800-9807 : 0000:00:1f.2
/proc/ioports: 9800-9807 : ahci
/proc/ioports: a000-bfff : PCI Bus #01
/proc/ioports: a400-a40f : 0000:01:04.0
/proc/ioports: a400-a407 : ide2
/proc/ioports: a408-a40f : ide3
/proc/ioports: a800-a803 : 0000:01:04.0
/proc/ioports: b000-b007 : 0000:01:04.0
/proc/ioports: b400-b403 : 0000:01:04.0
/proc/ioports: b800-b807 : 0000:01:04.0
/proc/ioports: c000-cfff : PCI Bus #02
/proc/ioports: c800-c8ff : 0000:02:00.0
/proc/ioports: c800-c8ff : sky2
/proc/ioports: d000-dfff : PCI Bus #03
/proc/ioports: e000-efff : PCI Bus #04
/proc/ioports: ffa0-ffaf : 0000:00:1f.1
/proc/ioports: ffa0-ffa7 : ide0
/proc/ioports: ffa8-ffaf : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7ffaffff : System RAM
/proc/iomem: 00200000-003e2542 : Kernel code
/proc/iomem: 003e2543-004ba667 : Kernel data
/proc/iomem: 7ffb0000-7ffbdfff : ACPI Tables
/proc/iomem: 7ffbe000-7ffeffff : ACPI Non-volatile Storage
/proc/iomem: 7fff0000-7fffffff : reserved
/proc/iomem: 88000000-880fffff : PCI Bus #01
/proc/iomem: 88000000-8801ffff : 0000:01:04.0
/proc/iomem: d2cf4000-d2cf7fff : 0000:00:1b.0
/proc/iomem: d2cff800-d2cffbff : 0000:00:1d.7
/proc/iomem: d2cff800-d2cffbff : ehci_hcd
/proc/iomem: d2cffc00-d2cfffff : 0000:00:1f.2
/proc/iomem: d2cffc00-d2cfffff : ahci
/proc/iomem: d2d00000-d2dfffff : PCI Bus #01
/proc/iomem: d2db0000-d2dbffff : 0000:01:00.0
/proc/iomem: d2dc0000-d2dcffff : 0000:01:00.0
/proc/iomem: d2dd8000-d2ddbfff : 0000:01:03.0
/proc/iomem: d2ddf800-d2ddffff : 0000:01:03.0
/proc/iomem: d2ddf800-d2ddffff : ohci1394
/proc/iomem: d2e00000-d2efffff : PCI Bus #02
/proc/iomem: d2ec0000-d2edffff : 0000:02:00.0
/proc/iomem: d2efc000-d2efffff : 0000:02:00.0
/proc/iomem: d2efc000-d2efffff : sky2
/proc/iomem: d2f00000-d7ffffff : PCI Bus #04
/proc/iomem: d2fe0000-d2ffffff : 0000:04:00.0
/proc/iomem: d3000000-d3ffffff : 0000:04:00.0
/proc/iomem: d4000000-d7ffffff : 0000:04:00.0
/proc/iomem: d8000000-dfffffff : PCI Bus #04
/proc/iomem: d8000000-dfffffff : 0000:04:00.0
/proc/iomem: ffb00000-ffffffff : reserved
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 0: 690682 0 IO-APIC-edge timer
/proc/interrupts: 1: 2609 0 IO-APIC-edge i8042
/proc/interrupts: 7: 0 0 IO-APIC-edge parport0
/proc/interrupts: 8: 0 0 IO-APIC-edge rtc
/proc/interrupts: 9: 0 0 IO-APIC-level acpi
/proc/interrupts: 14: 2032 0 IO-APIC-edge ide0
/proc/interrupts: 50: 3 0 IO-APIC-level ohci1394
/proc/interrupts: 58: 53458 0 PCI-MSI sky2
/proc/interrupts: 169: 0 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 217: 0 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
/proc/interrupts: 225: 4290623 0 IO-APIC-level uhci_hcd:usb2, libata
/proc/interrupts: 233: 0 0 IO-APIC-level uhci_hcd:usb3
/proc/interrupts: NMI: 570 549
/proc/interrupts: LOC: 680511 680488
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 2061164 kB
/proc/meminfo: MemFree: 1321016 kB
/proc/meminfo: Buffers: 27408 kB
/proc/meminfo: Cached: 593664 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 430912 kB
/proc/meminfo: Inactive: 210856 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 2061164 kB
/proc/meminfo: LowFree: 1321016 kB
/proc/meminfo: SwapTotal: 1959912 kB
/proc/meminfo: SwapFree: 1959912 kB
/proc/meminfo: Dirty: 1444 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 20704 kB
/proc/meminfo: Mapped: 1944 kB
/proc/meminfo: Slab: 74284 kB
/proc/meminfo: PageTables: 332 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 2990492 kB
/proc/meminfo: Committed_AS: 25444 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 7660 kB
/proc/meminfo: VmallocChunk: 34359730687 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3802078f840d001 feffffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 78 structures occupying 2358 bytes.
dmidecode: Table at 0x000F04D0.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: American Megatrends Inc.
dmidecode: Version: 1007.002
dmidecode: Release Date: 03/21/2005
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 1024 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: System manufacturer
dmidecode: Product Name: System Product Name
dmidecode: Version: System Version
dmidecode: Serial Number: System Serial Number
dmidecode: UUID: 803F57CC-94DC-BD11-ABF6-0011D8F387BA
dmidecode: Wake-up Type: <OUT OF SPEC>
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: ASUSTeK Computer INC.
dmidecode: Product Name: P5GD2-Deluxe
dmidecode: Version: Rev 2.xx
dmidecode: Serial Number: MB-1234567890
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Chassis Manufacture
dmidecode: Type: Desktop
dmidecode: Lock: Present
dmidecode: Version: Chassis Version
dmidecode: Serial Number: Chassis Serial Number
dmidecode: Asset Tag: Asset-1234567890
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode: OEM Information: 0x00000001
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Socket 775
dmidecode: Type: Central Processor
dmidecode: Family: Pentium 4
dmidecode: Manufacturer: Intel
dmidecode: ID: 43 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 4, Stepping 3
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Intel(R) Pentium(R) 4 CPU 3.00GHz
dmidecode: Voltage: 1.4 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 3600 MHz
dmidecode: Current Speed: 3000 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Other
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: 0x0007
dmidecode: Serial Number: To Be Filled By O.E.M.
dmidecode: Asset Tag: To Be Filled By O.E.M.
dmidecode: Part Number: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1-Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 16 KB
dmidecode: Maximum Size: 16 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2-Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 2048 KB
dmidecode: Maximum Size: 2048 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 8-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L3-Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 3
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x0008, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: None
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 1024 MB
dmidecode: Maximum Total Memory Size: 4096 MB
dmidecode: Supported Speeds:
dmidecode: 70 ns
dmidecode: 60 ns
dmidecode: 50 ns
dmidecode: Supported Memory Types:
dmidecode: SIMM
dmidecode: DIMM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0009
dmidecode: 0x000A
dmidecode: 0x000B
dmidecode: 0x000C
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: None
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM0
dmidecode: Bank Connections: 1 5
dmidecode: Current Speed: 37 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 1024 MB (Single-bank Connection)
dmidecode: Enabled Size: 1024 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM1
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000B, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM2
dmidecode: Bank Connections: 1 5
dmidecode: Current Speed: 37 ns
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: 1024 MB (Single-bank Connection)
dmidecode: Enabled Size: 1024 MB (Single-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000C, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM3
dmidecode: Bank Connections: 0 0
dmidecode: Current Speed: Unknown
dmidecode: Type: DIMM SDRAM
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS/2 Mouse
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS/2 Keyboard
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB3
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB4
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB5
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB6
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB7
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB8
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LPT 1
dmidecode: External Connector Type: DB-25 male
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: COM 1
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: MIDI
dmidecode: External Connector Type: DB-15 female
dmidecode: Port Type: MIDI Port
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Joy Stick
dmidecode: External Connector Type: DB-15 female
dmidecode: Port Type: Joystick Port
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out1
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out2
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out3
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out4
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out5
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0020, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out6
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0021, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: SPDIF_OUT1
dmidecode: External Connector Type: On Board Sound Input From CD-ROM
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0022, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: SPDIF_OUT2
dmidecode: External Connector Type: On Board Sound Input From CD-ROM
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0023, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: GbE LAN 1
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x0024, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: FireWire 1
dmidecode: External Connector Type: IEEE 1394
dmidecode: Port Type: Firewire (IEEE P1394)
dmidecode:
dmidecode: Handle 0x0025, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: FireWire 2
dmidecode: External Connector Type: IEEE 1394
dmidecode: Port Type: Firewire (IEEE P1394)
dmidecode:
dmidecode: Handle 0x0026, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: ITE_IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0027, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: ITE_IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0028, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0029, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_SATA1
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_SATA2
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_SATA3
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_SATA4
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Silicon_Image_SATA1
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Silicon_Image_SATA2
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Silicon_Image_SATA3
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0030, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Silicon_Image_SATA4
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0031, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CD
dmidecode: Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0032, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FP_AUDIO
dmidecode: Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0033, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: WIFI
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0034, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FLOPPY
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0035, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CHA_FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0036, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CPU_FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0037, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PWR_FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0038, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX16
dmidecode: Type: 32-bit PCI-X
dmidecode: Current Usage: In Use
dmidecode: Length: Short
dmidecode: ID: 0
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0039, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI_1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI_2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 6
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI_3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 7
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX1_1
dmidecode: Type: 32-bit PCI-X
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX1_2
dmidecode: Type: 32-bit PCI-X
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX1_3
dmidecode: Type: 32-bit PCI-X
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003F, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: Onboard Ethernet
dmidecode:
dmidecode: Handle 0x0040, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: To Be Filled By O.E.M.
dmidecode: String 2: To Be Filled By O.E.M.
dmidecode: String 3: To Be Filled By O.E.M.
dmidecode: String 4: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0041, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: en|US|iso8859-1
dmidecode: Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x0042, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0043, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x200000003FF
dmidecode: Range Size: 2147483649 kB
dmidecode: Physical Array Handle: 0x0042
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0044, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0042
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM0
dmidecode: Bank Locator: BANK0
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer0
dmidecode: Serial Number: SerNum0
dmidecode: Asset Tag: AssetTagNum0
dmidecode: Part Number: PartNum0
dmidecode:
dmidecode: Handle 0x0045, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x0044
dmidecode: Memory Array Mapped Address Handle: 0x0043
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0046, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0042
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM1
dmidecode: Bank Locator: BANK1
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer1
dmidecode: Serial Number: SerNum1
dmidecode: Asset Tag: AssetTagNum1
dmidecode: Part Number: PartNum1
dmidecode:
dmidecode: Handle 0x0047, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0046
dmidecode: Memory Array Mapped Address Handle: 0x0043
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0048, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0042
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM2
dmidecode: Bank Locator: BANK2
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer2
dmidecode: Serial Number: SerNum2
dmidecode: Asset Tag: AssetTagNum2
dmidecode: Part Number: PartNum2
dmidecode:
dmidecode: Handle 0x0049, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00040000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x0048
dmidecode: Memory Array Mapped Address Handle: 0x0043
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x004A, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0042
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM3
dmidecode: Bank Locator: BANK3
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer3
dmidecode: Serial Number: SerNum3
dmidecode: Asset Tag: AssetTagNum3
dmidecode: Part Number: PartNum3
dmidecode:
dmidecode: Handle 0x004B, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x004A
dmidecode: Memory Array Mapped Address Handle: 0x0043
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x004C, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x004D, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.22
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.33
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: firmware-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: firmware-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Firmware request modules
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-9
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.23
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.41
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: ide-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: ide-modules
Depends: kernel-image-2.6.18-3-amd64-di, ide-core-modules-2.6.18-3-amd64-di
Description: IDE drivers
Package: di-utils
Status: install ok installed
Version: 1.41
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: sata-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: sata-modules
Depends: kernel-image-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di
Description: SATA drivers
Package: scsi-core-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Core SCSI subsystem
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.110
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: floppy-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: floppy-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Floppy driver
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre3-1
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.45
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.103-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: scsi-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: scsi-modules
Depends: kernel-image-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di, scsi-common-modules-2.6.18-3-amd64-di, parport-modules-2.6.18-3-amd64-di, cdrom-core-modules-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di
Description: SCSI drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-6
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: usb-serial-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-3-amd64-di, usb-modules-2.6.18-3-amd64-di
Description: USB serial drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: pcmcia-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di
Description: Common PCMCIA drivers
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: parport-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: parport-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Parallel port support
Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.1-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.110
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: ide-core-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: ide-core-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: IDE support
Package: usb-storage-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di, usb-modules-2.6.18-3-amd64-di
Description: USB storage support
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: kernel-image-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: scsi-common-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di, cdrom-core-modules-2.6.18-3-amd64-di
Description: Very common SCSI drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.110
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: acpi-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: ACPI support modules
Package: cdrom-core-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di, ide-modules-2.6.18-3-amd64-di
Description: CDROM support
Package: fb-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: fb-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: Frame buffer support
Package: input-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: input-modules
Depends: kernel-image-2.6.18-3-amd64-di, usb-modules-2.6.18-3-amd64-di
Description: Input devices support
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0-1
Description: provides iso_3166.tab file
Package: serial-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: serial-modules
Depends: kernel-image-2.6.18-3-amd64-di, pcmcia-modules-2.6.18-3-amd64-di
Description: Serial drivers
Package: usb-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: usb-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: USB support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.45
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.22
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: firewire-core-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-3-amd64-di, kernel-image-2.6.18-3-amd64-di
Description: Core FireWire drivers
Package: archdetect
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.24
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.41
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-4
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.41
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.45
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.47
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.22
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.9
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.110
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.32
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.22
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: pcmcia-storage-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-3-amd64-di, ide-core-modules-2.6.18-3-amd64-di, cdrom-core-modules-2.6.18-3-amd64-di, pcmcia-modules-2.6.18-3-amd64-di
Description: PCMCIA storage drivers
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: fat-modules-2.6.18-3-amd64-di
Status: install ok unpacked
Version: 1.17
Provides: fat-modules
Depends: kernel-image-2.6.18-3-amd64-di
Description: FAT filesystem support
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.110
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20061214-22:52
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.70
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 284
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.10
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 224
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.1
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 160
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.41
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 76
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 368
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-15
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.6
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1004
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2132
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-9
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.12-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 352
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 472
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 592
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 184
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-7
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 3480
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di, nic-shared-modules-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di, crc-modules-2.6.18-3-amd64-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 620
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di, nic-shared-modules-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di, firewire-core-modules-2.6.18-3-amd64-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di, nic-shared-modules-2.6.18-3-amd64-di, nic-extra-modules-2.6.18-3-amd64-di, pcmcia-modules-2.6.18-3-amd64-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 296
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di, nic-shared-modules-2.6.18-3-amd64-di, usb-modules-2.6.18-3-amd64-di, firmware-modules-2.6.18-3-amd64-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.5-1)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 684
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 62
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 888
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 100
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 860
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1924
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: scsi-modules-2.6.18-3-amd64-di, scsi-core-modules-2.6.18-3-amd64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 300
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.14
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.8
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 696
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.18-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-3-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: kernel-image-2.6.18-3-amd64-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---