Your message dated Sat, 08 Jan 2011 18:49:40 +0000 with message-id <1294512580.2408.3.camel@eeepc.Belkin> and subject line has caused the Debian Bug report #399498, regarding Installation report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 399498: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=399498 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Installation report
- From: Tapio Lehtonen <tale@iki.fi>
- Date: Mon, 20 Nov 2006 09:23:25 +0200
- Message-id: <20061120072325.GA32506@iki.fi>
- Reply-to: tapio.lehtonen@pp6.inet.fi
Subject: installation-report: Installation OK, some problems afterwards Package: installation-reports Version: 2.23 Severity: wishlist *** Please type your report below this line *** -- Package-specific info: Boot method: CD Image version: netinst.iso RC1 Date: 2006-11-19 at 16.00 -- 18.30 Machine: Fujitsu Siemens Scaleo L Partitions: <df -Tl will do; the raw partition table is preferred> raija-desktop:~# fdisk -l Disk /dev/hda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 7532 60500758+ 83 Linux /dev/hda2 7533 7812 2249100 82 Linux swap / Solaris /dev/hda3 * 7813 9646 14731605 83 Linux /dev/hda4 9647 9729 666697+ 5 Extended /dev/hda5 9647 9729 666666 82 Linux swap / Solaris Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O ] Detect network card: [O ] Configure network: [O ] Detect CD: [O ] Load installer modules: [O ] Detect hard drives: [O ] Partition hard drives: [O ] Install base system: [O ] Clock/timezone setup: [O ] User/password setup: [O ] Install tasks: [O ] Install boot loader: [O ] Overall install: [O ] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> Installed with installgui. The screenshot button was visible even when clicking on it causes exit from graphical mode and text screen shows "killed <something>". I did get back to GUI, and only had to answer again to questions about using Debian mirrors. Wish: gray out Screenshot button when it should not be used. After installation, when I do aptitude install something, aptitude wants to uninstall stuff. Script started on su 19. marraskuuta 2006 20:23:14 raija-desktop:~# LANG=C LC_ALL=C aptitude install joe Reading package lists... 0% Reading package lists... 100% Reading package lists... Done Building dependency tree... 0% Building dependency tree... 0% Building dependency tree... 50% Building dependency tree... 50% Building dependency tree... Done Reading extended state information... 0% Reading extended state information... 0% Reading extended state information Initializing package states... 0% Initializing package states... 47% Initializing package states... Done Writing extended state information... 0% Writing extended state information... Done Reading task descriptions... 0% Reading task descriptions... 1% Reading task descriptions... Done Building tag database... 0% Building tag database... Done The following packages are unused and will be REMOVED: bug-buddy eog esound evince fast-user-switch-applet file-roller gcalctool gconf-editor gdm gdm-themes gedit gedit-common gnome-backgrounds gnome-cards-data gnome-core gnome-games gnome-games-data gnome-nettool gnome-system-tools gnome-themes gnomemeeting gucharmap guile-1.6-libs industrial-cursor-theme libdirectfb-0.9-25 libdjvulibre15 libdmx1 libgnomevfs2-bin libguile-ltdl-1 libkpathsea4 libopenh323-1.18.0 libpoppler0c2-glib libpt-1.10.0 libpt-plugins-alsa libpt-plugins-v4l libqthreads-12 libsdl1.2debian libsdl1.2debian-alsa libsvga1 svgalibg1 system-tools-backends unzip vino zenity zip The following NEW packages will be installed: joe 0 packages upgraded, 1 newly installed, 45 to remove and 0 not upgraded. Need to get 368kB of archives. After unpacking 125MB will be freed. Do you want to continue? [Y/n/?] n Abort. raija-desktop:~# exit Script done on su 19. marraskuuta 2006 20:23:38 I wish it would not unistall stuff that just got installed. There was also a problem with charset, looks like the text was UTF-8 but it was being displayed in Latin-9. Screenshot attached. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="3.1 (installer build 20061102)" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== umame -a: Linux raija-desktop 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 unknown lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 03) lspci -nn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 03) lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02) lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 02) lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 02) lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02) lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82) lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02) lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02) lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02) lspci -nn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 02) lspci -nn: 02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller [8086:1039] (rev 82) lspci -nn: 02:09.0 Modem [0703]: Smart Link Ltd. SmartLink SmartPCI562 56K Modem [163c:3052] (rev 04) lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 03) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1003] lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Memory at e0000000 (32-bit, prefetchable) [size=256M] lspci -vnn: Capabilities: [e4] Vendor Specific Information lspci -vnn: lspci -vnn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 03) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1003] lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 9 lspci -vnn: Memory at d8000000 (32-bit, prefetchable) [size=128M] lspci -vnn: Memory at d0000000 (32-bit, non-prefetchable) [size=512K] lspci -vnn: Capabilities: [d0] Power Management version 1 lspci -vnn: lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1004] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 185 lspci -vnn: I/O ports at 1000 [size=32] lspci -vnn: lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 02) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1004] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 193 lspci -vnn: I/O ports at 1400 [size=32] lspci -vnn: lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 02) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1004] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169 lspci -vnn: I/O ports at 1800 [size=32] lspci -vnn: lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02) (prog-if 20) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1004] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177 lspci -vnn: Memory at d0080000 (32-bit, non-prefetchable) [size=1K] lspci -vnn: Capabilities: [50] Power Management version 2 lspci -vnn: Capabilities: [58] Debug port lspci -vnn: lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82) lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 lspci -vnn: I/O behind bridge: 00003000-00003fff lspci -vnn: Memory behind bridge: d0100000-d01fffff lspci -vnn: lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02) lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02) (prog-if 8a [Master SecP PriP]) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1004] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169 lspci -vnn: I/O ports at <unassigned> lspci -vnn: I/O ports at <unassigned> lspci -vnn: I/O ports at <unassigned> lspci -vnn: I/O ports at <unassigned> lspci -vnn: I/O ports at 2800 [size=16] lspci -vnn: Memory at 40000000 (32-bit, non-prefetchable) [size=1K] lspci -vnn: lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1004] lspci -vnn: Flags: medium devsel, IRQ 5 lspci -vnn: I/O ports at 1c00 [size=32] lspci -vnn: lspci -vnn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 02) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1023] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 5 lspci -vnn: I/O ports at 2400 [size=256] lspci -vnn: I/O ports at 2000 [size=64] lspci -vnn: Memory at d0080c00 (32-bit, non-prefetchable) [size=512] lspci -vnn: Memory at d0080800 (32-bit, non-prefetchable) [size=256] lspci -vnn: Capabilities: [50] Power Management version 2 lspci -vnn: lspci -vnn: 02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller [8086:1039] (rev 82) lspci -vnn: Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:1001] lspci -vnn: Flags: bus master, medium devsel, latency 66, IRQ 201 lspci -vnn: Memory at d0100000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: I/O ports at 3000 [size=64] lspci -vnn: Capabilities: [dc] Power Management version 2 lspci -vnn: lspci -vnn: 02:09.0 Modem [0703]: Smart Link Ltd. SmartLink SmartPCI562 56K Modem [163c:3052] (rev 04) lspci -vnn: Subsystem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem [163c:3052] lspci -vnn: Flags: bus master, stepping, fast Back2Back, medium devsel, latency 64, IRQ 11 lspci -vnn: Memory at d0101000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: I/O ports at 3400 [size=256] lspci -vnn: Capabilities: [80] Power Management version 2 lspci -vnn: lsmod: Module Size Used by lsmod: sd_mod 18448 0 lsmod: qnx4 10484 0 lsmod: ntfs 184468 0 lsmod: xfs 481140 0 lsmod: reiserfs 210176 0 lsmod: jfs 156124 0 lsmod: ext3 115336 1 lsmod: jbd 45460 1 ext3 lsmod: vfat 11520 0 lsmod: fat 45852 1 vfat lsmod: e100 31108 0 lsmod: eepro100 27920 0 lsmod: mii 5248 2 e100,eepro100 lsmod: nls_iso8859_1 4224 2 lsmod: rsrc_nonstatic 11904 0 lsmod: pcmcia_core 36368 1 rsrc_nonstatic lsmod: isofs 31672 0 lsmod: ide_generic 1408 0 [permanent] lsmod: pdc202xx_new 7936 0 [permanent] lsmod: aec62xx 6784 0 [permanent] lsmod: alim15x3 11020 0 [permanent] lsmod: amd74xx 12700 0 [permanent] lsmod: atiixp 5520 0 [permanent] lsmod: cmd64x 10140 0 [permanent] lsmod: cs5520 4608 0 [permanent] lsmod: cs5530 4864 0 [permanent] lsmod: cs5535 4224 0 [permanent] lsmod: cy82c693 4356 0 [permanent] lsmod: hpt34x 4992 0 [permanent] lsmod: it821x 7812 0 [permanent] lsmod: ns87415 4168 0 [permanent] lsmod: opti621 4100 0 [permanent] lsmod: pdc202xx_old 9472 0 [permanent] lsmod: rz1000 2688 0 [permanent] lsmod: sc1200 6656 0 [permanent] lsmod: serverworks 8200 0 [permanent] lsmod: siimage 10752 0 [permanent] lsmod: sis5513 12424 0 [permanent] lsmod: slc90e66 5120 0 [permanent] lsmod: triflex 3712 0 [permanent] lsmod: trm290 3972 0 [permanent] lsmod: via82cxxx 8324 0 [permanent] lsmod: floppy 52868 0 lsmod: usb_storage 69952 0 lsmod: scsi_mod 120840 2 sd_mod,usb_storage lsmod: vga16fb 11400 0 lsmod: vgastate 7808 1 vga16fb lsmod: usbserial 28136 0 lsmod: usbhid 35040 0 lsmod: usbkbd 6656 0 lsmod: thermal 12680 0 lsmod: processor 21440 1 thermal lsmod: fan 4484 0 lsmod: ide_cd 35104 0 lsmod: cdrom 32288 1 ide_cd lsmod: ide_disk 14976 3 lsmod: generic 4356 0 [permanent] lsmod: evdev 8960 6 lsmod: uhci_hcd 19464 0 lsmod: ehci_hcd 26888 0 lsmod: usbcore 108544 7 usb_storage,usbserial,usbhid,usbkbd,uhci_hcd,ehci_hcd lsmod: piix 9220 0 [permanent] lsmod: ide_core 107940 30 ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,ide_disk,generic,piix lsmod: parport_pc 31524 0 lsmod: parport 31944 1 parport_pc lsmod: psmouse 34184 0 df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 384060 424 383636 0% /dev df: tmpfs 384060 424 383636 0% /dev df: tmpfs 384060 424 383636 0% /.dev df: /dev/ide/host0/bus0/target0/lun0/part3 14500100 2621320 11142200 19% /target free: total used free shared buffers free: Mem: 768124 743828 24296 0 52332 free: Swap: 666656 420 666236 free: Total: 1434780 744248 690532 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 15 /proc/cpuinfo: model : 2 /proc/cpuinfo: model name : Intel(R) Celeron(R) CPU 2.80GHz /proc/cpuinfo: stepping : 9 /proc/cpuinfo: cpu MHz : 2792.321 /proc/cpuinfo: cache size : 128 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 2 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up cid xtpr /proc/cpuinfo: bogomips : 5589.23 /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-006f : keyboard /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : ide1 /proc/ioports: 01f0-01f7 : ide0 /proc/ioports: 0376-0376 : ide1 /proc/ioports: 0378-037a : parport0 /proc/ioports: 037b-037f : parport0 /proc/ioports: 03c0-03df : vesafb /proc/ioports: 03f6-03f6 : ide0 /proc/ioports: 03f8-03ff : serial /proc/ioports: 1000-101f : 0000:00:1d.0 /proc/ioports: 1000-101f : uhci_hcd /proc/ioports: 1400-141f : 0000:00:1d.1 /proc/ioports: 1400-141f : uhci_hcd /proc/ioports: 1800-181f : 0000:00:1d.2 /proc/ioports: 1800-181f : uhci_hcd /proc/ioports: 1c00-1c1f : 0000:00:1f.3 /proc/ioports: 2000-203f : 0000:00:1f.5 /proc/ioports: 2400-24ff : 0000:00:1f.5 /proc/ioports: 2800-280f : 0000:00:1f.1 /proc/ioports: 2800-2807 : ide0 /proc/ioports: 2808-280f : ide1 /proc/ioports: 3000-3fff : PCI Bus #02 /proc/ioports: 3000-303f : 0000:02:08.0 /proc/ioports: 3000-303f : eepro100 /proc/ioports: 3400-34ff : 0000:02:09.0 /proc/ioports: f000-f07f : 0000:00:1f.0 /proc/ioports: f000-f07f : motherboard /proc/ioports: f000-f003 : PM1a_EVT_BLK /proc/ioports: f004-f005 : PM1a_CNT_BLK /proc/ioports: f008-f00b : PM_TMR /proc/ioports: f010-f015 : ACPI CPU throttle /proc/ioports: f028-f02f : GPE0_BLK /proc/ioports: f100-f10f : motherboard /proc/ioports: f180-f1bf : 0000:00:1f.0 /proc/ioports: f180-f1bf : motherboard /proc/ioports: f820-f82f : motherboard /proc/ioports: fe00-fe00 : motherboard /proc/iomem: 00000000-0009f7ff : System RAM /proc/iomem: 00000000-00000000 : Crash kernel /proc/iomem: 0009f800-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-2f6effff : System RAM /proc/iomem: 00100000-0026c0f2 : Kernel code /proc/iomem: 0026c0f3-002f9cef : Kernel data /proc/iomem: 2f6f0000-2f6fafff : ACPI Tables /proc/iomem: 2f6fb000-2f6fffff : ACPI Non-volatile Storage /proc/iomem: 2f700000-2f77ffff : System RAM /proc/iomem: 2f780000-2fffffff : reserved /proc/iomem: 40000000-400003ff : 0000:00:1f.1 /proc/iomem: d0000000-d007ffff : 0000:00:02.0 /proc/iomem: d0080000-d00803ff : 0000:00:1d.7 /proc/iomem: d0080000-d00803ff : ehci_hcd /proc/iomem: d0080800-d00808ff : 0000:00:1f.5 /proc/iomem: d0080c00-d0080dff : 0000:00:1f.5 /proc/iomem: d0100000-d01fffff : PCI Bus #02 /proc/iomem: d0100000-d0100fff : 0000:02:08.0 /proc/iomem: d0100000-d0100fff : eepro100 /proc/iomem: d0101000-d0101fff : 0000:02:09.0 /proc/iomem: d8000000-dfffffff : 0000:00:02.0 /proc/iomem: d8000000-d87cffff : vesafb /proc/iomem: e0000000-efffffff : 0000:00:00.0 /proc/iomem: fec00000-fed003ff : reserved /proc/iomem: fee00000-feefffff : reserved /proc/iomem: ffb80000-ffbfffff : reserved /proc/iomem: fff00000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 1731059 IO-APIC-edge timer /proc/interrupts: 1: 266 IO-APIC-edge i8042 /proc/interrupts: 7: 0 IO-APIC-edge parport0 /proc/interrupts: 9: 0 IO-APIC-level acpi /proc/interrupts: 12: 33394 IO-APIC-edge i8042 /proc/interrupts: 14: 100136 IO-APIC-edge ide0 /proc/interrupts: 15: 1508 IO-APIC-edge ide1 /proc/interrupts: 169: 0 IO-APIC-level uhci_hcd:usb4 /proc/interrupts: 177: 2 IO-APIC-level ehci_hcd:usb1 /proc/interrupts: 185: 29 IO-APIC-level uhci_hcd:usb2 /proc/interrupts: 193: 0 IO-APIC-level uhci_hcd:usb3 /proc/interrupts: 201: 565686 IO-APIC-level eth0 /proc/interrupts: NMI: 0 /proc/interrupts: LOC: 1731008 /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 768124 kB /proc/meminfo: MemFree: 24232 kB /proc/meminfo: Buffers: 52332 kB /proc/meminfo: Cached: 601596 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 291028 kB /proc/meminfo: Inactive: 403564 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 768124 kB /proc/meminfo: LowFree: 24232 kB /proc/meminfo: SwapTotal: 666656 kB /proc/meminfo: SwapFree: 666236 kB /proc/meminfo: Dirty: 5216 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: Mapped: 46760 kB /proc/meminfo: Slab: 40980 kB /proc/meminfo: CommitLimit: 1050716 kB /proc/meminfo: Committed_AS: 90292 kB /proc/meminfo: PageTables: 276 kB /proc/meminfo: VmallocTotal: 523984 kB /proc/meminfo: VmallocUsed: 8672 kB /proc/meminfo: VmallocChunk: 514656 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: H: Handlers=kbd event0 /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0011 Vendor=0002 Product=0005 Version=0000 /proc/bus/input/devices: N: Name="ImPS/2 Generic Wheel Mouse" /proc/bus/input/devices: P: Phys=isa0060/serio1/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input1 /proc/bus/input/devices: H: Handlers=event1 /proc/bus/input/devices: B: EV=7 /proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0 /proc/bus/input/devices: B: REL=103 /proc/bus/input/devices: dmidecode: # dmidecode 2.8 dmidecode: SMBIOS 2.31 present. dmidecode: 59 structures occupying 1558 bytes. dmidecode: Table at 0x000F0FD0. dmidecode: dmidecode: Handle 0x0000, DMI type 0, 20 bytes dmidecode: BIOS Information dmidecode: Vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd. dmidecode: Version: 4.06 Rev. 1.03.1520 dmidecode: Release Date: 10/01/2003 dmidecode: Address: 0xE63E0 dmidecode: Runtime Size: 105504 bytes dmidecode: ROM Size: 384 kB dmidecode: Characteristics: dmidecode: PCI is supported dmidecode: PNP is supported dmidecode: APM is supported dmidecode: BIOS is upgradeable dmidecode: BIOS shadowing is allowed dmidecode: ESCD support is available dmidecode: Boot from CD is supported dmidecode: Selectable boot is supported dmidecode: Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) dmidecode: Japanese floppy for Toshiba 1.2 MB is supported (int 13h) dmidecode: 5.25"/360 KB floppy services are supported (int 13h) dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h) dmidecode: 3.5"/720 KB floppy services are supported (int 13h) dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h) dmidecode: Print screen service is supported (int 5h) dmidecode: 8042 keyboard services are supported (int 9h) dmidecode: Serial services are supported (int 14h) dmidecode: Printer services are supported (int 17h) dmidecode: CGA/mono video services are supported (int 10h) dmidecode: ACPI is supported dmidecode: USB legacy is supported dmidecode: AGP is supported dmidecode: LS-120 boot is supported dmidecode: ATAPI Zip drive boot is supported dmidecode: BIOS boot specification is supported dmidecode: dmidecode: Handle 0x0001, DMI type 1, 25 bytes dmidecode: System Information dmidecode: Manufacturer: FUJITSU SIEMENS dmidecode: Product Name: D1520 dmidecode: Version: dmidecode: Serial Number: dmidecode: UUID: 00000000-0000-0000-0000-0030055E608C dmidecode: Wake-up Type: Power Switch dmidecode: dmidecode: Handle 0x0002, DMI type 2, 8 bytes dmidecode: Base Board Information dmidecode: Manufacturer: FUJITSU SIEMENS dmidecode: Product Name: D1520 dmidecode: Version: S26361-D1520 dmidecode: Serial Number: dmidecode: dmidecode: Handle 0x0003, DMI type 3, 17 bytes dmidecode: Chassis Information dmidecode: Manufacturer: FUJITSU SIEMENS dmidecode: Type: Mini Tower dmidecode: Lock: Present dmidecode: Version: dmidecode: Serial Number: dmidecode: Asset Tag: dmidecode: Boot-up State: Safe dmidecode: Power Supply State: Safe dmidecode: Thermal State: Safe dmidecode: Security Status: None dmidecode: OEM Information: 0x00000000 dmidecode: dmidecode: Handle 0x0004, DMI type 4, 35 bytes dmidecode: Processor Information dmidecode: Socket Designation: CPU dmidecode: Type: Central Processor dmidecode: Family: Celeron dmidecode: Manufacturer: Intel dmidecode: ID: 29 0F 00 00 FF FB EB BF dmidecode: Signature: Type 0, Family 15, Model 2, Stepping 9 dmidecode: Flags: dmidecode: FPU (Floating-point unit on-chip) dmidecode: VME (Virtual mode extension) dmidecode: DE (Debugging extension) dmidecode: PSE (Page size extension) dmidecode: TSC (Time stamp counter) dmidecode: MSR (Model specific registers) dmidecode: PAE (Physical address extension) dmidecode: MCE (Machine check exception) dmidecode: CX8 (CMPXCHG8 instruction supported) dmidecode: APIC (On-chip APIC hardware supported) dmidecode: SEP (Fast system call) dmidecode: MTRR (Memory type range registers) dmidecode: PGE (Page global enable) dmidecode: MCA (Machine check architecture) dmidecode: CMOV (Conditional move instruction supported) dmidecode: PAT (Page attribute table) dmidecode: PSE-36 (36-bit page size extension) dmidecode: CLFSH (CLFLUSH instruction supported) dmidecode: DS (Debug store) dmidecode: ACPI (ACPI supported) dmidecode: MMX (MMX technology supported) dmidecode: FXSR (Fast floating-point save and restore) dmidecode: SSE (Streaming SIMD extensions) dmidecode: SSE2 (Streaming SIMD extensions 2) dmidecode: SS (Self-snoop) dmidecode: HTT (Hyper-threading technology) dmidecode: TM (Thermal monitor supported) dmidecode: PBE (Pending break enabled) dmidecode: Version: Celeron(R) dmidecode: Voltage: 3.3 V dmidecode: External Clock: 400 MHz dmidecode: Max Speed: 2800 MHz dmidecode: Current Speed: 2800 MHz dmidecode: Status: Populated, Enabled dmidecode: Upgrade: ZIF Socket dmidecode: L1 Cache Handle: 0x0005 dmidecode: L2 Cache Handle: 0x0006 dmidecode: L3 Cache Handle: Not Provided dmidecode: Serial Number: Not Specified dmidecode: Asset Tag: Not Specified dmidecode: Part Number: Not Specified dmidecode: dmidecode: Handle 0x0005, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: L1 Cache dmidecode: Configuration: Enabled, Not Socketed, Level 1 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 20 KB dmidecode: Maximum Size: 20 KB dmidecode: Supported SRAM Types: dmidecode: Burst dmidecode: Synchronous dmidecode: Installed SRAM Type: Burst Synchronous dmidecode: Speed: Unknown dmidecode: Error Correction Type: Single-bit ECC dmidecode: System Type: Data dmidecode: Associativity: 4-way Set-associative dmidecode: dmidecode: Handle 0x0006, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: L2 Cache dmidecode: Configuration: Enabled, Not Socketed, Level 2 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 128 KB dmidecode: Maximum Size: 512 KB dmidecode: Supported SRAM Types: dmidecode: Burst dmidecode: Pipeline Burst dmidecode: Synchronous dmidecode: Asynchronous dmidecode: Installed SRAM Type: Burst dmidecode: Speed: Unknown dmidecode: Error Correction Type: Unknown dmidecode: System Type: Unified dmidecode: Associativity: Other dmidecode: dmidecode: Handle 0x0007, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: SMsC dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: PS/2 Mouse dmidecode: External Connector Type: PS/2 dmidecode: Port Type: Mouse Port dmidecode: dmidecode: Handle 0x0008, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: SMsC dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Keyboard dmidecode: External Connector Type: PS/2 dmidecode: Port Type: Keyboard Port dmidecode: dmidecode: Handle 0x0009, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: SMsC dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Parallel dmidecode: External Connector Type: DB-25 female dmidecode: Port Type: Parallel Port ECP/EPP dmidecode: dmidecode: Handle 0x000A, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: SMsC dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Serial-1 dmidecode: External Connector Type: DB-9 male dmidecode: Port Type: Serial Port 16550 Compatible dmidecode: dmidecode: Handle 0x000B, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: SMsC dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) dmidecode: External Reference Designator: Serial-2 dmidecode: External Connector Type: None dmidecode: Port Type: Serial Port 16550 Compatible dmidecode: dmidecode: Handle 0x000C, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: SMsC dmidecode: Internal Connector Type: On Board Floppy dmidecode: External Reference Designator: Floppy dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x000D, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: ICH4 dmidecode: Internal Connector Type: On Board IDE dmidecode: External Reference Designator: Primary IDE dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x000E, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: ICH4 dmidecode: Internal Connector Type: On Board IDE dmidecode: External Reference Designator: Secondary IDE dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x000F, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: ICH4 dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB-1 dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0010, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: ICH4 dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB-2 dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0011, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: ICH4 dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) dmidecode: External Reference Designator: USB-3 dmidecode: External Connector Type: None dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0012, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: ICH4 dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) dmidecode: External Reference Designator: USB-4 dmidecode: External Connector Type: None dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0013, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: ICH4 dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) dmidecode: External Reference Designator: USB-5 dmidecode: External Connector Type: None dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0014, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: ICH4 dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) dmidecode: External Reference Designator: USB-6 dmidecode: External Connector Type: None dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0015, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Intel 845GE dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Video dmidecode: External Connector Type: DB-15 female dmidecode: Port Type: Video Port dmidecode: dmidecode: Handle 0x0016, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: INTEL 82562 dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: LAN dmidecode: External Connector Type: RJ-45 dmidecode: Port Type: Network Port dmidecode: dmidecode: Handle 0x0017, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: AD1980 dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Line-In dmidecode: External Connector Type: Mini Jack (headphones) dmidecode: Port Type: Audio Port dmidecode: dmidecode: Handle 0x0018, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: AD1980 dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Line-Out dmidecode: External Connector Type: Mini Jack (headphones) dmidecode: Port Type: Audio Port dmidecode: dmidecode: Handle 0x0019, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: AD1980 dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Mic-In dmidecode: External Connector Type: Mini Jack (headphones) dmidecode: Port Type: Audio Port dmidecode: dmidecode: Handle 0x001A, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: AGP dmidecode: Type: 32-bit AGP 4x dmidecode: Current Usage: Available dmidecode: Length: Long dmidecode: ID: 1 dmidecode: Characteristics: dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x001B, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI-1 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: Available dmidecode: Length: Long dmidecode: ID: 2 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x001C, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI-2 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: Available dmidecode: Length: Long dmidecode: ID: 3 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x001D, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI-3 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: In Use dmidecode: Length: Long dmidecode: ID: 4 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x001E, DMI type 10, 10 bytes dmidecode: On Board Device 1 Information dmidecode: Type: Other dmidecode: Status: Disabled dmidecode: Description: SMsC SuperI/O dmidecode: On Board Device 2 Information dmidecode: Type: Sound dmidecode: Status: Disabled dmidecode: Description: AD1980 dmidecode: On Board Device 3 Information dmidecode: Type: Ethernet dmidecode: Status: Disabled dmidecode: Description: Intel 82562 dmidecode: dmidecode: Handle 0x001F, DMI type 11, 5 bytes dmidecode: OEM Strings dmidecode: String 1: FUJITSU SIEMENS dmidecode: String 2: FUJITSU SIEMENS SYSTEM dmidecode: dmidecode: Handle 0x0020, DMI type 12, 5 bytes dmidecode: System Configuration Options dmidecode: Option 1: DIP1 ON: Reserved dmidecode: Option 2: DIP2 ON: Recovery BIOS active dmidecode: Option 3: DIP3 ON: RTC Reset active dmidecode: Option 4: DIP4 ON: Reserved dmidecode: dmidecode: Handle 0x0021, DMI type 16, 15 bytes dmidecode: Physical Memory Array dmidecode: Location: System Board Or Motherboard dmidecode: Use: System Memory dmidecode: Error Correction Type: None dmidecode: Maximum Capacity: 2 GB dmidecode: Error Information Handle: Not Provided dmidecode: Number Of Devices: 2 dmidecode: dmidecode: Handle 0x0022, DMI type 17, 27 bytes dmidecode: Memory Device dmidecode: Array Handle: 0x0021 dmidecode: Error Information Handle: Not Provided dmidecode: Total Width: 64 bits dmidecode: Data Width: 64 bits dmidecode: Size: 256 MB dmidecode: Form Factor: DIMM dmidecode: Set: None dmidecode: Locator: DIMM-1 dmidecode: Bank Locator: Not Specified dmidecode: Type: DDR dmidecode: Type Detail: Synchronous dmidecode: Speed: 266 MHz (3.8 ns) dmidecode: Manufacturer: Not Specified dmidecode: Serial Number: Not Specified dmidecode: Asset Tag: Not Specified dmidecode: Part Number: Not Specified dmidecode: dmidecode: Handle 0x0023, DMI type 17, 27 bytes dmidecode: Memory Device dmidecode: Array Handle: 0x0021 dmidecode: Error Information Handle: Not Provided dmidecode: Total Width: 64 bits dmidecode: Data Width: 64 bits dmidecode: Size: 512 MB dmidecode: Form Factor: DIMM dmidecode: Set: None dmidecode: Locator: DIMM-2 dmidecode: Bank Locator: Not Specified dmidecode: Type: DDR dmidecode: Type Detail: Synchronous dmidecode: Speed: 266 MHz (3.8 ns) dmidecode: Manufacturer: Not Specified dmidecode: Serial Number: Not Specified dmidecode: Asset Tag: Not Specified dmidecode: Part Number: Not Specified dmidecode: dmidecode: Handle 0x0024, DMI type 19, 15 bytes dmidecode: Memory Array Mapped Address dmidecode: Starting Address: 0x00000000000 dmidecode: Ending Address: 0x000300003FF dmidecode: Range Size: 786433 kB dmidecode: Physical Array Handle: 0x0021 dmidecode: Partition Width: 0 dmidecode: dmidecode: Handle 0x0025, DMI type 20, 19 bytes dmidecode: Memory Device Mapped Address dmidecode: Starting Address: 0x00000000000 dmidecode: Ending Address: 0x0000FFFFFFF dmidecode: Range Size: 256 MB dmidecode: Physical Device Handle: 0x0022 dmidecode: Memory Array Mapped Address Handle: 0x0024 dmidecode: Partition Row Position: 1 dmidecode: dmidecode: Handle 0x0026, DMI type 20, 19 bytes dmidecode: Memory Device Mapped Address dmidecode: Starting Address: 0x00010000000 dmidecode: Ending Address: 0x0002FFFFFFF dmidecode: Range Size: 512 MB dmidecode: Physical Device Handle: 0x0023 dmidecode: Memory Array Mapped Address Handle: 0x0024 dmidecode: Partition Row Position: 1 dmidecode: dmidecode: Handle 0x0027, DMI type 32, 11 bytes dmidecode: System Boot Information dmidecode: Status: No errors detected dmidecode: dmidecode: Handle 0x0028, DMI type 128, 12 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 80 0C 28 00 01 01 02 01 00 02 40 02 dmidecode: Strings: dmidecode: Alert on LAN dmidecode: FSC_BASIC_AOL_02 dmidecode: dmidecode: Handle 0x0029, DMI type 129, 16 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 81 10 29 00 00 5F 46 4A 5F 4F 45 4D 5F 10 00 00 dmidecode: dmidecode: Handle 0x002A, DMI type 129, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: 81 08 2A 00 01 00 00 01 dmidecode: dmidecode: Handle 0x002B, DMI type 176, 16 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B0 10 2B 00 00 80 20 15 00 00 FF FF 03 00 FF FF dmidecode: dmidecode: Handle 0x002C, DMI type 177, 12 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B1 0C 2C 00 11 02 03 61 00 00 00 00 dmidecode: dmidecode: Handle 0x002D, DMI type 179, 6 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B3 06 2D 00 0F 2F dmidecode: dmidecode: Handle 0x002E, DMI type 180, 10 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B4 0A 2E 00 E3 01 F4 40 00 00 dmidecode: dmidecode: Handle 0x002F, DMI type 185, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B9 08 2F 00 00 10 00 00 dmidecode: dmidecode: Handle 0x0030, DMI type 185, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B9 08 30 00 01 10 00 00 dmidecode: dmidecode: Handle 0x0031, DMI type 185, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B9 08 31 00 02 09 00 00 dmidecode: dmidecode: Handle 0x0032, DMI type 185, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B9 08 32 00 0F 10 00 00 dmidecode: dmidecode: Handle 0x0033, DMI type 185, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B9 08 33 00 11 02 03 A0 dmidecode: dmidecode: Handle 0x0034, DMI type 185, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B9 08 34 00 15 10 00 00 dmidecode: dmidecode: Handle 0x0035, DMI type 185, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B9 08 35 00 17 10 00 00 dmidecode: dmidecode: Handle 0x0036, DMI type 185, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: B9 08 36 00 FF 00 00 00 dmidecode: dmidecode: Handle 0x0037, DMI type 186, 15 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: BA 0F 37 00 1A B3 41 04 97 D4 00 00 25 0D EA dmidecode: dmidecode: Handle 0x0038, DMI type 188, 8 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: BC 08 38 00 38 38 31 24 dmidecode: dmidecode: Handle 0x0039, DMI type 189, 7 bytes dmidecode: OEM-specific Type dmidecode: Header and Data: dmidecode: BD 07 39 00 FF 33 00 dmidecode: dmidecode: Handle 0x003A, DMI type 127, 4 bytes dmidecode: End Of Table dmidecode: dfbinfo: (*) DirectFB/Config: Parsing config file '/etc/directfbrc'. dfbinfo: dfbinfo: ---------------------- DirectFB v0.9.25 --------------------- dfbinfo: (c) 2000-2002 convergence integrated media GmbH dfbinfo: (c) 2002-2004 convergence GmbH dfbinfo: ----------------------------------------------------------- dfbinfo: dfbinfo: (*) DirectFB/Core: Single Application Core. (2006-10-17 10:15) dfbinfo: (*) Direct/Memcpy: Using libc memcpy() dfbinfo: (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 21556)... dfbinfo: (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 21557)... dfbinfo: (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [../../../lib/fusion/reactor.c:853] dfbinfo: (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH) dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 21558)... dfbinfo: (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence integrated media GmbH) dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 21559)... dfbinfo: (*) DirectFB/Input: ImPS/2 Generic Wheel Mouse (2) 0.1 (convergence integrated media GmbH) dfbinfo: (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (convergence integrated media GmbH) dfbinfo: (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH) dfbinfo: dfbinfo: dfbinfo: Screen (00) FBDev Primary Screen (primary screen) dfbinfo: Caps: VSYNC POWER_MANAGEMENT dfbinfo: dfbinfo: Layer (00) FBDev Primary Layer (primary layer) dfbinfo: Type: GRAPHICS dfbinfo: Caps: SURFACE BRIGHTNESS CONTRAST SATURATION dfbinfo: dfbinfo: dfbinfo: Input (00) Keyboard (primary keyboard) dfbinfo: Type: KEYBOARD dfbinfo: Caps: KEYS dfbinfo: dfbinfo: Input (10) AT Translated Set 2 keyboard dfbinfo: Type: KEYBOARD dfbinfo: Caps: KEYS dfbinfo: dfbinfo: Input (01) ImPS/2 Generic Wheel Mouse (primary mouse) dfbinfo: Type: MOUSE dfbinfo: Caps: AXES BUTTONS dfbinfo: Max. Axis: 2 dfbinfo: Max. Button: 2 dfbinfo: ============================================== Installer status: ============================================== Package: ttf-thai-tlwg-udeb Status: install ok unpacked Version: 1:0.4.4-5 Description: Thai fonts in TrueType format for D-I use Package: input-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: input-modules Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Description: Input devices support Package: acpi-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: acpi-modules Depends: kernel-image-2.6.17-2-486-di Description: ACPI support modules Package: scsi-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: scsi-modules Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Description: SCSI drivers Package: preseed-common Status: install ok unpacked Version: 1.20 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: mouse-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: mouse-modules Depends: kernel-image-2.6.17-2-486-di, input-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Description: Mouse support Package: udpkg Status: install ok unpacked Version: 1.04 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 1.29 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: cdrom-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: cdrom-modules Depends: ide-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di Description: Esoteric CDROM drivers Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.6.ds1-4 Description: GNU C Library: NSS helper for DNS - udeb Package: cdrom-checker Status: install ok unpacked Version: 1.09 Depends: cdrom-detect, cdebconf-udeb (>= 0.31) Description: Verify the cd contents Installer-Menu-Item: 940 Package: lowmemcheck Status: install ok unpacked Version: 1.21 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: cdrom-retriever Status: install ok installed Version: 1.12 Provides: retriever Depends: cdebconf-udeb, cdrom-detect Description: Fetch modules from a CDROM Package: main-menu Status: install ok unpacked Version: 1.15 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: Debian installer main menu Package: ttf-khmeros-udeb Status: install ok unpacked Version: 3.10-3 Provides: ttf-installer Description: Debian-Installer font for the Khmer language of Cambodia Package: di-utils-shell Status: install ok unpacked Version: 1.39 Depends: cdebconf-udeb, di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: usb-serial-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: usb-serial-modules Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Description: USB serial drivers Package: ttf-dejavu-udeb Status: install ok unpacked Version: 2.10-1 Description: Vera font family derivate with additional characters Package: di-utils Status: install ok installed Version: 1.39 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: Miscellaneous utilities for the debian installer Package: usb-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: usb-modules Depends: kernel-image-2.6.17-2-486-di Description: USB support Package: pcmcia-storage-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: pcmcia-storage-modules Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Description: PCMCIA storage drivers Package: scsi-core-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: scsi-core-modules Depends: kernel-image-2.6.17-2-486-di Description: Core SCSI subsystem Package: ttf-cjk-compact-udeb Status: install ok unpacked Version: 1.8 Description: Shrinked CJK TrueType fonts for GUI d-i. Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.108 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: ttf-freefont-udeb Status: install ok unpacked Version: 20060501cvs-9 Provides: ttf-installer Description: Freefont Sans fonts for the graphical installer Package: ttf-dzongkha-udeb Status: install ok unpacked Version: 0.2-3 Provides: ttf-installer Description: TrueType fonts for Dzongkha language Package: module-init-tools-udeb Status: install ok unpacked Version: 3.2.2-3 Depends: libc6 (>= 2.3.6-6) Description: tools for managing Linux kernel modules Package: rootskel Status: install ok installed Version: 1.40 Depends: di-utils (>= 1.24), cdebconf-udeb Description: Skeleton root filesystem used by debian-installer Package: libgtk-directfb-2.0-0-udeb Status: install ok unpacked Version: 2.8.20-3 Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libpango1.0-udeb (>= 1.14.5), libpng12-0-udeb (>= 1.2.8rel) Description: The GTK+ graphical user interface library - minimal runtime Package: firmware-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: firmware-modules Depends: kernel-image-2.6.17-2-486-di Description: Firmware request modules Package: udev-udeb Status: install ok unpacked Version: 0.100-2.2 Depends: libc6 (>= 2.3.6-6) Description: /dev/ and hotplug management daemon Package: libpng12-0-udeb Status: install ok unpacked Version: 1.2.8rel-7 Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1) Description: PNG library - minimal runtime library Package: libnss-files-udeb Status: install ok unpacked Version: 2.3.6.ds1-4 Description: GNU C Library: NSS helper for files - udeb Package: fb-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: fb-modules Depends: kernel-image-2.6.17-2-486-di Description: Frame buffer support Package: brltty-udeb Status: install ok unpacked Version: 3.7.2-4 Depends: libc6 (>= 2.3.6-6) Description: Access software for a blind person using a soft braille terminal Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-4 Depends: libc6 (>= 2.3.6-6) Description: Free Implementation of the Unicode BiDi algorithm Package: scsi-common-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: scsi-common-modules Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di Description: Very common SCSI drivers Package: libcairo-directfb2-udeb Status: install ok unpacked Version: 1.2.4-4 Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libdirectfb-0.9-25-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), zlib1g-udeb (>= 1:1.2.1) Description: The Cairo 2D vector graphics library DirectFB build Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-5 Depends: libc6 (>= 2.3.6-6) Description: text-wrapping library with i18n - runtime udeb Package: gtk2-engines-udeb Status: install ok unpacked Version: 1:2.8.1-3 Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.5) Description: theme engines for GTK+ 2.x in the Debian installer Package: pcmcia-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: pcmcia-modules Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Description: Common PCMCIA drivers Package: auto-install Status: install ok unpacked Version: 0.02 Depends: netcfg, preseed-common (>= 1.18) Description: Support for automatic installs Installer-Menu-Item: 19 Package: usb-discover Status: install ok unpacked Version: 1.06 Depends: cdebconf-udeb Description: Discover USB and load kernel modules Package: serial-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: serial-modules Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Description: Serial drivers Package: ide-core-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: ide-core-modules Depends: kernel-image-2.6.17-2-486-di Description: IDE support Package: rescue-check Status: install ok unpacked Version: 1.7 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 1.9.99pre2-1 Provides: editor Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3) Description: free Pico clone with some new features - tiny build Package: rootskel-gtk Status: install ok unpacked Version: 1.00 Depends: cdebconf-udeb, rootskel, mouse-modules, gtk2-engines-udeb Description: Additions for graphical installs to skeleton root filesystem (debian-installer) Package: cdebconf-udeb Status: install ok installed Version: 0.108 Provides: debconf-2.0 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: ai-choosers Status: install ok unpacked Version: 0.02 Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23) Description: Delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 22 Package: floppy-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: floppy-modules Depends: kernel-image-2.6.17-2-486-di Description: Floppy driver Package: libpango1.0-udeb Status: install ok unpacked Version: 1.14.7-1 Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libfreetype6-udeb (>= 2.2), libglib2.0-udeb (>= 2.12.0), zlib1g-udeb (>= 1:1.2.1) Description: Layout and rendering of internationalized text Package: libiw28-udeb Status: install ok installed Version: 28-1 Depends: libc6 (>= 2.3.5-1) Description: Tools for manipulating Linux Wireless Extensions Package: parport-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: parport-modules Depends: kernel-image-2.6.17-2-486-di Description: Parallel port support Package: load-cdrom Status: install ok installed Version: 1.12 Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07) Description: Load installer components from CD Installer-Menu-Item: 16 Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.108 Depends: cdebconf-udeb, libc6 (>= 2.3.6-6) Description: Plain text frontend for Debian Configuration Management System Package: firewire-core-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: firewire-core-modules Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di Description: Core FireWire drivers Package: libfreetype6-udeb Status: install ok unpacked Version: 2.2.1-5 Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1) Description: FreeType 2 font engine for the debian-installer Package: iso-3166-udeb Status: install ok installed Version: 0.57-1 Description: provides iso_3166.tab file Package: ttf-farsiweb-udeb Status: install ok unpacked Version: 0.4-4 Provides: ttf-installer Description: Farsiweb TrueType fonts for the graphical installer Package: floppy-retriever Status: install ok unpacked Version: 1.11 Provides: retriever Depends: cdebconf-udeb, mountfloppy Description: Fetches modules from a floppy Package: ethdetect Status: install ok installed Version: 1.43 Provides: ethernet-card-detection Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 18 Package: libexpat1-udeb Status: install ok unpacked Version: 1.95.8-3.3 Provides: libexpat1 Depends: libc6 (>= 2.3.6-6) Description: XML parsing C library - runtime library Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-3 Depends: libc6 (>= 2.3.6-6) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.20 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: archdetect Status: install ok installed Version: 1.43 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45) Description: Hardware architecture detector Package: cdrom-core-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: cdrom-core-modules Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di Description: CDROM support Package: ttf-bpg-georgian-fonts-udeb Status: install ok unpacked Version: 0.3 Provides: ttf-installer Description: BPG Georgian fonts for the graphical installer Package: save-logs Status: install ok unpacked Version: 2.23 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.39 Depends: cdebconf-udeb Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.25 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: libsysfs2-udeb Status: install ok unpacked Version: 2.0.0-7 Provides: libsysfs2 Depends: libc6 (>= 2.3.6-6) Description: interface library to sysfs Package: pcmciautils-udeb Status: install ok unpacked Version: 014-2 Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb Description: PCMCIA utilities for Linux 2.6 Package: pciutils-udeb Status: install ok unpacked Version: 1:2.2.4~pre4-1 Depends: libc6 (>= 2.3.6-6) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2:1.01-1 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: ttf-tamil-fonts-udeb Status: install ok unpacked Version: 1:0.4.7.1 Provides: ttf-installer Description: Free TrueType fonts for the Tamil language Package: usb-storage-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: usb-storage-modules Depends: ide-core-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Description: USB storage support Package: di-utils-terminfo Status: install ok unpacked Version: 1.39 Description: Terminfo entries needed by newt/slang in debian installer Package: libdirectfb-0.9-25-udeb Status: install ok unpacked Version: 0.9.25.1-4 Provides: libdirectfb-0.9-25 Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1) Description: direct frame buffer graphics - shared libraries Package: hw-detect Status: install ok installed Version: 1.43 Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.31 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps Description: Detect a keyboard and select layout Installer-Menu-Item: 12 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.45 Depends: libc6 (>= 2.3.6-6) Description: Library of common debian-installer functions Package: fontconfig-udeb Status: install ok unpacked Version: 2.4.1-2 Depends: libc6 (>= 2.3.6-6), libexpat1-udeb (>= 1.95.8), libfreetype6-udeb (>= 2.2), zlib1g-udeb (>= 1:1.2.1) Description: generic font configuration library - minimal runtime Package: cdebconf-gtk-udeb Status: install ok unpacked Version: 0.108 Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.7), rootskel-gtk (>= 0.05) Description: Gtk+ frontend for Debian Configuration Management System Package: installation-locale Status: install ok unpacked Version: 1.1 Depends: rootskel Description: UTF-8 C locale Package: env-preseed Status: install ok unpacked Version: 1.20 Description: debconf preseeding via environment variables Package: mountfloppy Status: install ok unpacked Version: 0.8 Depends: cdebconf-udeb, di-utils (>= 1.15) Description: Mounts a floppy Package: cdebconf-priority Status: install ok unpacked Version: 0.108 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 930 Package: fat-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: fat-modules Depends: kernel-image-2.6.17-2-486-di Description: FAT filesystem support Package: netcfg Status: install ok installed Version: 1.31 Provides: configured-network Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection Description: Configure the network Installer-Menu-Item: 18 Package: file-preseed Status: install ok unpacked Version: 1.20 Depends: cdebconf-udeb, di-utils, preseed-common Description: load debconf preseed file Installer-Menu-Item: 14 Package: zlib1g-udeb Status: install ok unpacked Version: 1:1.2.3-13 Provides: zlib1g Description: compression library - runtime for Debian installer Package: libglib2.0-udeb Status: install ok unpacked Version: 2.12.4-1 Depends: libc6 (>= 2.3.6-6) Description: The GLib library of C routines Package: sata-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: sata-modules Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di Description: SATA drivers Package: libdebconfclient0-udeb Status: install ok installed Version: 0.108 Depends: libc6 (>= 2.3.6-6), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.5 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: ide-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: ide-modules Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di Description: IDE drivers Package: libatk1.0-udeb Status: install ok unpacked Version: 1.12.3-1 Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.12.0) Description: The ATK accessibility toolkit Package: cdrom-detect Status: install ok installed Version: 1.18 Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33) Description: Detect CDROM devices and mount the CD Installer-Menu-Item: 13 Package: kernel-image-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: debian-installer Status: install ok installed Version: cdrom-gtk-20061102 Description: debian installation image Package: apt-cdrom-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 44 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.16 Depends: cdrom-detect, cdebconf-udeb Provides: apt-mirror-setup Description: set up a CD in sources.list Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 152 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.16 Depends: choose-mirror-bin, cdebconf-udeb Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 100 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.16 Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb Description: Configure apt Installer-Menu-Item: 70 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 596 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.68 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19) Provides: kernel-installer Description: Install the base system Installer-Menu-Item: 65 Package: choose-mirror-bin Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 272 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2.08 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: Choose mirror to install from (program) Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 72 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.12 Depends: cdebconf-udeb, os-prober, tzsetup-udeb Description: set up clock Installer-Menu-Item: 62 Package: crc-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: crc-modules Description: CRC modules This package contains CRC support modules. Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 168 Maintainer: Anthony Towns <ajt@debian.org> Version: 0.3.3 Depends: libc6 (>= 2.3.5-1), mounted-partitions Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: dhcp-client-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 100 Maintainer: Eloy A. Paris <peloy@debian.org> Version: 2.0pl5-19.4 Depends: libc6 (>= 2.3.5-1) Description: DHCP Client for debian-installer dhcp-client-udeb is a minimal dhcp package used by the debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 16 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.39 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 60 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.43 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 35 Package: dmidecode-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 60 Maintainer: Petter Reinholdtsen <pere@debian.org> Version: 2.8-2 Depends: libc6 (>= 2.3.5-1) Description: Dump Desktop Management Interface data (udeb) Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 356 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-2 Depends: libblkid1-udeb, libc6 (>= 2.3.6-6) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: elilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 96 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.7 Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install elilo on a hard disk This udeb will install elilo on the hard disk. Installer-Menu-Item: 76 Package: ext3-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 236 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: fdisk-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 136 Maintainer: LaMont Jones <lamont@debian.org> Version: 2.12r-12 Depends: libc6 (>= 2.3.6-6) Description: Partition a hard drive (manual) fdisk package Package: finish-install Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2.5 Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system Provides: prebaseconfig Description: Finish the installation and reboot Installer-Menu-Item: 78 Package: grub-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 356 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.19 Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install GRUB on a hard disk Installer-Menu-Item: 73 Package: jfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 212 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: jfs-modules Description: JFS filesystem support This package contains the JFS filesystem module for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 984 Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de> Version: 1.1.11-1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 40 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-2 Depends: libc6 (>= 2.3.6-6) Provides: libblkid1 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 1584 Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org> Version: 2.3.6.ds1-7 Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libdevmapper1.02-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 52 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2:1.02.08-1 Depends: libc6 (>= 2.3.6-6) Provides: libdevmapper1.02 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libparted1.7-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 328 Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org> Version: 1.7.1-2.1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Provides: libparted1.7-1 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 24 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-2 Depends: libc6 (>= 2.3.6-6) Provides: libuuid1 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This is a minimal package for debian-installer. Package: lilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 220 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.18 Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install LILO on a hard disk Installer-Menu-Item: 75 Package: loop-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 428 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2.02.06-3 Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2) Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: md-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 348 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 176 Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org> Version: 2.5.3.git200608202239-7 Depends: libc6 (>= 2.3.6-6) Description: tool to administer Linux MD arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD arrays (e.g. software RAID, multipath devices). . mdadm-udeb is a minimal package used by the debian-installer. Package: mdcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 384 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.19 Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions Description: Configure MD devices Use this module to configure the MD devices. Package: mkreiserfs-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Ed Boraas <ed@debian.org> Version: 1:3.6.19-4 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: User-level tools for ReiserFS filesystems This installer module contains the utility to create ReiserFS filesystems. . Homepage: http://www.namesys.com/ Package: network-preseed Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 40 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.20 Depends: cdebconf-udeb, configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 21 Package: nic-extra-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 2872 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, crc-modules-2.6.17-2-486-di Provides: nic-extra-modules Description: Rare NIC drivers This package contains rare NIC drivers for the Linux kernel. Package: nic-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 444 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, firewire-core-modules-2.6.17-2-486-di Provides: nic-modules Description: Common NIC drivers This package contains common NIC drivers for the Linux kernel. Package: nic-pcmcia-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 556 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Provides: nic-pcmcia-modules Description: Common PCMCIA NIC drivers This package contains common PCMCIA NIC drivers for the Linux kernel. Package: nic-shared-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: nic-shared-modules Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-extra-modules, and nic-pcmcia-modules. Package: nic-usb-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 188 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Provides: nic-usb-modules Description: USB NIC drivers This package contains USB network adapter drivers for the Linux kernel. Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.13 Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 77 Package: ntfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 244 Maintainer: David MartÃnez Moreno <ender@debian.org> Version: 1.13.1-4 Depends: libc6 (>= 2.3.6-6) Provides: ntfstools-udeb Description: Tools for doing neat things in NTFS partitions from Linux - udeb Currently this udeb contains only ntfsresize. Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 68 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.14 Depends: di-utils-mapdevfs, anna (>= 1.16) Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: partconf-find-partitions Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.19 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1) Description: debian-installer utility for finding partitions Helper program for finding partitions and detecting their size and existing file system. Package: parted-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 60 Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org> Version: 1.7.1-2.1 Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1) Provides: parted Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 356 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 60 Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-auto-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 3 Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87) Description: Automatically partition storage devices using crypto and LVM Package: partman-auto-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 148 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 18 Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb Description: Automatically partition storage devices using LVM Package: partman-auto-raid Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2 Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md Description: Allow preseeded RAID installs Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 848 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 97 Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15) Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab Description: Partition the storage devices (partman) Installer-Menu-Item: 42 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 576 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 49 Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 124 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 32 Depends: cdebconf-udeb Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 856 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 17 Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb Description: Add to partman support for block device encryption Package: partman-efi Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 11 Depends: partman-base Description: Add to partman support for EFI boot partitions Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 220 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 43 Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-jfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 260 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 18 Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add support for jfs to partman Package: partman-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 680 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 47 Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb Description: Adds support for LVM to partman Package: partman-md Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 156 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 30 Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87) Description: Add to partman support for MD Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 364 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 44 Depends: ntfsprogs-udeb, cdebconf-udeb Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-reiserfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 228 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 32 Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for reiserfs Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 304 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 46 Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-xfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 216 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 30 Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for xfs Package: pcmcia-cs-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 232 Maintainer: Per Olofsson <pelle@debian.org> Version: 3.2.8-9 Description: PCMCIA Card Services for Linux (udeb) Package: pkgsel Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 28 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.10 Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 70 Package: reiserfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 268 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: reiserfs-modules Description: Reiser filesystem support This package contains the Reiser filesystem module for the Linux kernel. Package: scsi-extra-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 1316 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di Provides: scsi-extra-modules Description: Uncommon SCSI drivers This package contains uncommon SCSI drivers for the Linux kernel. This includes SCSI RAID drivers, and some of the less common SCSI controllers. Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 292 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.12 Depends: cdebconf-udeb, localechooser Description: choose timezone Installer-Menu-Item: 62 Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 336 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.7 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 63 Package: wireless-tools-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 28 Maintainer: Guus Sliepen <guus@debian.org> Version: 28-1 Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28) Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools. Package: xfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 568 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: xfs-modules Description: XFS filesystem support This package contains the XFS filesystem module for the Linux kernel. Package: xfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 232 Maintainer: Nathan Scott <nathans@debian.org> Version: 2.8.11-1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: A stripped-down version of xfsprogs, for debian-installer This package is an xfsprogs package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: ntfs-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 248 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: ntfs-modules Description: NTFS filesystem support This package contains the NTFS file system module for the Linux kernel. Package: qnx4-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: qnx4-modules Description: QNX4 filesystem support This package contains the QNX4 filesystem module for the Linux kernel. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8) installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities ii reportbug 3.31 reports bugs in the Debian distrib -- no debconf informationAttachment: Console-data.png
Description: PNG image
--- End Message ---
--- Begin Message ---
- To: 399498-done@bugs.debian.org
- Subject:
- From: Miguel Figueiredo <elmig@debianpt.org>
- Date: Sat, 08 Jan 2011 18:49:40 +0000
- Message-id: <1294512580.2408.3.camel@eeepc.Belkin>
Closing the bug as the Sarge installer is no longer supported. Current installer release it's 'squeeze beta2'. If you experience any issue with current installer please send an installation report. -- Melhores cumprimentos/Best regards, Miguel Figueiredo http://www.DebianPT.org
--- End Message ---