Re: [RFR] templates://partman-zfs/partman-zfs.templates
Justin B Rye wrote:
> - Please chose the mode for multidisk operations for this ZFS pool:
> + Please chose the mode for multidisk operations for this ZFS pool:
Hang on, uncaught typo - it rhymes with "lose" and "whose" but it's
spelt like "loose" and "moose"...
--
JBR with qualifications in linguistics, experience as a Debian
sysadmin, and probably no clue about this particular package
Template: partman-zfs/text/zfs
Type: text
# :sl4:
# File system name (untranslatable in many languages)
_Description: zfs
Template: partman/filesystem_short/zfs
Type: text
# :sl4:
# Short file system name (untranslatable in many languages)
_Description: zfs
Template: partman/filesystem_long/zfs
Type: text
# :sl4:
# File system name
_Description: ZFS file system
Template: partman-zfs/multipv_root
Type: error
# :sl4:
Description: Separate /boot mandatory for this ZFS configuration
Your root file system is on a ZFS pool that uses more than one
physical volume. The boot loader only supports this configuration
for pools in Mirror mode, not Striped or RAID-Z modes.
.
Make sure /boot is on a partition using a supported ZFS pool
configuration, or a different file system such as UFS.
Template: partman-zfs/multipv_boot
Type: error
# :sl4:
Description: Unsupported multiple volume ZFS for /boot
Your /boot partition is on a ZFS pool that uses more than one
physical volume. The boot loader only supports this configuration
for pools in Mirror mode, not Striped or RAID-Z modes.
.
Make sure /boot is on a partition using a supported ZFS pool
configuration, or a different file system such as UFS.
Template: partman-zfs/i386
Type: boolean
# :sl4:
_Description: Go back to the menu and correct this problem?
You have configured one or more partitions with the ZFS file
system. Although ZFS is supported on 32-bit i386, using it without
special tuning may lead to performance or stability problems
due to limitations of this architecture.
.
You should either use the 64-bit (amd64) version of this
installer (if your hardware supports this), or go back to the
partitioning menu and configure the partitions to use another
file system.
Template: partman-zfs/lowmem
Type: boolean
# :sl4:
_Description: Go back to the menu and correct this problem?
You have configured one or more partitions with the ZFS file
system. Using ZFS on a computer with less than 512 MB of memory
may lead to stability problems and is not recommended.
.
You should go back to the partitioning menu and configure
the partitions to use another file system.
Template: partman-zfs/text/configure_zfs
Type: text
# :sl4:
_Description: Configure ZFS
Template: partman-zfs/text/in_use
Type: text
# :sl4:
# What is "in use" is a partition
_Description: In use by ZFS pool ${VG}
Template: partman-zfs/menu/display
Type: text
# :sl4:
# Menu entry
# Use infinitive form
_Description: Display configuration details
Template: partman-zfs/menu/createvg
Type: text
# :sl4:
# Menu entry
# Use infinitive form
_Description: Create ZFS pool
Template: partman-zfs/menu/deletevg
Type: text
# :sl4:
# Menu entry
# Use infinitive form
_Description: Delete ZFS pool
Template: partman-zfs/menu/createlv
Type: text
# :sl4:
# Menu entry
# Use infinitive form
_Description: Create logical volume
Template: partman-zfs/menu/deletelv
Type: text
# :sl4:
# Menu entry
# Use infinitive form
_Description: Delete logical volume
Template: partman-zfs/menu/finish
Type: text
# :sl4:
# Menu entry
# Use infinitive form
_Description: Finish
Template: partman-zfs/confirm
Type: boolean
Default: false
# :sl4:
#flag:translate!:4
_Description: Write the changes to disk and configure ZFS?
Before ZFS can be configured, the current
partitioning scheme has to be written to disk. These changes cannot
be undone.
.
After ZFS is configured, no additional changes
to the partitioning scheme of disks containing physical volumes are
allowed during the installation. Please decide if you are satisfied
with the current partitioning scheme before continuing.
.
${ITEMS}
Template: partman-zfs/commit_failed
Type: error
# :sl4:
_Description: ZFS configuration failure
An error occurred while writing the changes to the disks.
.
ZFS configuration has been aborted.
Template: partman/method_long/zfs
Type: text
# :sl4:
_Description: physical volume for ZFS
Template: partman/method_short/zfs
Type: text
# :sl4:
# keep it short (ideally a 3-letter acronym)
_Description: zfs
Template: partman-zfs/mainmenu
Type: select
Choices-C: ${CHOICES}
Choices: ${CHOICES_L10N}
# :sl4:
_Description: ZFS configuration action:
Summary of current ZFS configuration:
.
Free physical volumes: ${FREE_PVS}
Used physical volumes: ${USED_PVS}
ZFS pools: ${VGS}
ZFS logical volumes: ${LVS}
Help: partman-zfs/help
Template: partman-zfs/displayall
Type: note
# :sl4:
#flag:translate!:2
_Description: Current ZFS configuration:
${CURRENT_CONFIG}
Template: partman-zfs/vgcreate_parts
Type: multiselect
Choices: ${PARTITIONS}
# :sl4:
_Description: Devices for the new ZFS pool:
Please select devices for the new ZFS pool.
.
You can select one or more devices.
Template: partman-zfs/vgcreate_multipv
Type: select
Choices: ${MULTIPV_CHOICES}
# :sl4:
_Description: Multidisk mode for this ZFS pool:
Please choose the mode for multidisk operations for this ZFS pool:
* Striped: similar to RAID 0 (default) - data is spread across the
physical volumes;
* Mirror: similar to RAID 1 - data is replicated to each physical
volume;
* RAID-Z: similar to RAID 5 or RAID 6 - some physical volumes
store parity bits and data is spread across others.
Template: partman-zfs/vgcreate_raidz_parity
Type: select
Choices: ${RAIDZ_PARITY}
# :sl4:
_Description: Parity level for RAID-Z:
Please choose the number of physical volumes that will be used to
store parity bits.
Template: partman-zfs/vgcreate_name
Type: string
# :sl4:
_Description: ZFS pool name:
Please enter the name you would like to use for the new ZFS pool.
Template: partman-zfs/vgcreate_nosel
Type: error
# :sl4:
_Description: No physical volumes selected
No physical volumes were selected. The creation of a new
ZFS pool has been aborted.
Template: partman-zfs/vgcreate_nonamegiven
Type: error
# :sl4:
_Description: No ZFS pool name
No name for the ZFS pool has been entered. Please enter a name.
Template: partman-zfs/vgcreate_nameused
Type: error
# :sl4:
_Description: ZFS pool name already in use
The selected ZFS pool name is already in use. Please choose
a different name.
Template: partman-zfs/vgcreate_error
Type: error
# :sl4:
_Description: Error while creating ZFS pool
The ZFS pool ${VG} could not be created.
.
Check /var/log/syslog or see virtual console 4 for the details.
Template: partman-zfs/vgdelete_names
Type: select
Choices: ${GROUPS}
# :sl4:
_Description: ZFS pool to delete:
Please select the ZFS pool you wish to delete.
Template: partman-zfs/vgdelete_novg
Type: error
# :sl4:
_Description: No ZFS pool
No ZFS pool has been found.
.
The ZFS pool may have already been deleted.
Template: partman-zfs/vgdelete_confirm
Type: boolean
Default: true
# :sl4:
_Description: Really delete the ZFS pool?
Please confirm the removal of the ZFS pool ${VG}.
Template: partman-zfs/vgdelete_error
Type: error
# :sl4:
_Description: Error while deleting ZFS pool
The selected ZFS pool could not be deleted. One or more logical
volumes may currently be in use.
Template: partman-zfs/lvcreate_nofreevg
Type: error
# :sl4:
_Description: No ZFS pool found
No free ZFS pools were found for creating a new logical volume.
Please create another ZFS pool, or free space in an
existing ZFS pool.
Template: partman-zfs/lvcreate_name
Type: string
# :sl4:
_Description: Logical volume name:
Please enter the name you would like to use for the new logical volume.
Template: partman-zfs/lvcreate_vgnames
Type: select
Choices: ${GROUPS}
# :sl4:
_Description: ZFS pool:
Please select the ZFS pool where the new logical volume
should be created.
Template: partman-zfs/lvcreate_nonamegiven
Type: error
# :sl4:
_Description: No logical volume name entered
No name for the logical volume has been entered. Please enter a
name.
Template: partman-zfs/lvcreate_exists
Type: error
# :sl4:
_Description: Error while creating a new logical volume
The name ${LV} is already in use by another logical volume on the
same ZFS pool (${VG}).
Template: partman-zfs/lvcreate_size
Type: string
# :sl4:
_Description: Logical volume size:
Please enter the size of the new logical volume. The size may be
entered in the following formats: 10K (Kilobytes), 10M (Megabytes),
10G (Gigabytes), 10T (Terabytes). The default unit is Megabytes.
Template: partman-zfs/lvcreate_error
Type: error
# :sl4:
_Description: Error while creating a new logical volume
Unable to create a new logical volume (${LV}) on ${VG} with the new
size ${SIZE}.
.
Check /var/log/syslog or see virtual console 4 for the details.
Template: partman-zfs/lvdelete_nolv
Type: error
# :sl4:
_Description: No logical volume found
No logical volume has been found. Please create a logical volume first.
Template: partman-zfs/lvdelete_lvnames
Type: select
Choices: ${LVS}
# :sl4:
_Description: Logical volume:
Please select the logical volume to delete.
Template: partman-zfs/text/lvdelete_invg
Type: text
# :sl4:
_Description: in VG ${VG}
Template: partman-zfs/lvdelete_error
Type: error
# :sl4:
_Description: Error while deleting the logical volume
The logical volume ${LV} on ${VG} could not be deleted.
.
Check /var/log/syslog or see virtual console 4 for the details.
Template: partman-zfs/nopartitions
Type: error
# :sl4:
_Description: No usable physical volumes found
No physical volumes (i.e. partitions) were found in this system. All
physical volumes may already be in use. You may also need to load
some required kernel modules or re-partition the hard drives.
Template: partman-zfs/nozfs
Type: error
# :sl4:
_Description: ZFS not available
The current kernel doesn't support ZFS. You may
need to load the zfs module.
Template: partman-zfs/badnamegiven
Type: error
# :sl4:
_Description: Invalid logical volume or ZFS pool name
Logical volume or ZFS pool names may only contain alphanumeric
characters, hyphen, colon, period, and underscore. They must be 255
characters or less and must begin with an alphanumeric character. The names
"mirror", "raidz", "spare", and "log" are not allowed.
.
Please choose a different name.
Template: partman-zfs/device_remove_zfs
Type: boolean
Default: false
# :sl4:
_Description: Remove existing logical volume data?
The selected device already contains the following ZFS logical volumes
and ZFS pools which are about to be removed:
.
Logical volume(s): ${LVTARGETS}
.
ZFS pool(s): ${VGTARGETS}
.
Note that this will also permanently erase any data currently on the
logical volumes.
Template: partman-zfs/help
Type: note
# :sl4:
_Description: ZFS
A common situation for system administrators is to find that some disk
partition (usually the most important one) is short on space, while some
other partition is underused. ZFS can help with this.
.
ZFS allows combining disk or partition devices ("physical volumes") to form
a virtual disk ("ZFS pool"), which can then be divided into virtual
partitions ("logical volumes"). ZFS pools and logical volumes may span
across several physical disks. New physical volumes may be added to a ZFS pool
at any time, and logical volumes have no size limit other than the total
size of the ZFS pool.
.
The items on the ZFS configuration menu can be used to edit ZFS pools
and logical volumes. After you return to the main partition manager screen,
logical volumes will be displayed in the same way as ordinary partitions,
and should be treated as such.
--- partman-zfs.templates.old 2011-08-05 12:18:02.001958260 +0100
+++ partman-zfs.templates 2011-08-05 15:11:41.125961020 +0100
@@ -20,27 +20,23 @@
Type: error
# :sl4:
Description: Separate /boot mandatory for this ZFS configuration
- The ZFS pool where your root file system is hosted is configured to use more
- than one physical volume.
+ Your root file system is on a ZFS pool that uses more than one
+ physical volume. The boot loader only supports this configuration
+ for pools in Mirror mode, not Striped or RAID-Z modes.
.
- With the exception of Mirror mode, configurations with multiple volumes
- (Striped or RAID-Z) are not supported by the boot loader.
- .
- You should use a separate /boot partition in another ZFS
- pool in Mirror mode or with another file system, such as UFS.
+ Make sure /boot is on a partition using a supported ZFS pool
+ configuration, or a different file system such as UFS.
Template: partman-zfs/multipv_boot
Type: error
# :sl4:
Description: Unsupported multiple volume ZFS for /boot
- The ZFS pool where your /boot file system is hosted is configured to use more
- than one physical volume.
- .
- With the exception of Mirror mode, configurations with multiple volumes
- (Striped or RAID-Z) are not supported by the boot loader.
+ Your /boot partition is on a ZFS pool that uses more than one
+ physical volume. The boot loader only supports this configuration
+ for pools in Mirror mode, not Striped or RAID-Z modes.
.
- The /boot partition should use a separate ZFS pool or another
- file system, such as UFS.
+ Make sure /boot is on a partition using a supported ZFS pool
+ configuration, or a different file system such as UFS.
Template: partman-zfs/i386
Type: boolean
@@ -61,7 +57,7 @@
# :sl4:
_Description: Go back to the menu and correct this problem?
You have configured one or more partitions with the ZFS file
- system. Using ZFS on a computer with less than 512 Mb of memory
+ system. Using ZFS on a computer with less than 512 MB of memory
may lead to stability problems and is not recommended.
.
You should go back to the partitioning menu and configure
@@ -191,14 +187,13 @@
Choices: ${MULTIPV_CHOICES}
# :sl4:
_Description: Multidisk mode for this ZFS pool:
- Please chose the mode for multidisk operations for this ZFS pool:
- - Striped: (default) data is spread across the physical volumes.
- Similar to RAID 0;
- - Mirror: data is replicated to each physical volume.
- Similar to RAID 1;
- - RAID-Z: some physical volumes store parity bits and data is
- spread across others.
- Similar to RAID 5 or RAID 6.
+ Please choose the mode for multidisk operations for this ZFS pool:
+ * Striped: similar to RAID 0 (default) - data is spread across the
+ physical volumes;
+ * Mirror: similar to RAID 1 - data is replicated to each physical
+ volume;
+ * RAID-Z: similar to RAID 5 or RAID 6 - some physical volumes
+ store parity bits and data is spread across others.
Template: partman-zfs/vgcreate_raidz_parity
Type: select
@@ -372,7 +367,7 @@
Logical volume or ZFS pool names may only contain alphanumeric
characters, hyphen, colon, period, and underscore. They must be 255
characters or less and must begin with an alphanumeric character. The names
- "mirror", "raidz", "spare" and "log" are not allowed.
+ "mirror", "raidz", "spare", and "log" are not allowed.
.
Please choose a different name.
Reply to: