[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: squeeze boot failure



Hi Dieter,

A Quinta 24 Fevereiro 2011 15:29:41 Dieter Faulbaum você escreveu:
> Miguel Figueiredo <elmig@debianpt.org> writes:
> > A Terça 22 Fevereiro 2011 17:27:47 Dieter Faulbaum você escreveu:
> > 
> > Please take a look on the installer log at /var/log/installer/syslog or
> > if 'installer' doesn't exists, /var/log/syslog.
> > This should have more details on what is happening.
> 
> I didn't find any suspicious in that file, what explains the non-booting.
> 
> > Care to send it (gzipped) so we can take a look?
> 
> Do you?

I am not familiar with the HP Proliant DL 380 but i found this on your log 
that might be relevant:

Feb 22 12:55:30 kernel: [   88.277525] qla2xxx 0000:06:01.0: firmware: 
requesting ql2300_fw.bin
Feb 22 12:55:30 kernel: [   88.283698] qla2xxx 0000:06:01.0: Firmware image 
unavailable.
Feb 22 12:55:30 kernel: [   88.283703] qla2xxx 0000:06:01.0: Firmware images 
can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/.
Feb 22 12:55:30 kernel: [   88.283709] qla2xxx 0000:06:01.0: Failed to 
initialize adapter

The adapter fails to initialize, seems to be due to missing firmware. 
Did you add it later (i see the controller starts working later) ?
If not, the procedure is described in the installation manual [1].
The firmware is available on non-free on the package: firmware-qlogic
Somehow (maybe the fw is not mandatory) the storage is detected.

1 - http://d-i.alioth.debian.org/manual/en.amd64/ch06s04.html



Then there are some errors about duplicated PVs on LVM:

Feb 22 13:03:43 partman-lvm:   Found duplicate PV 
HoUN7toMf0CJXuWQ0ZQKTY5Q9ynivkGh: using /dev/sdc not /dev/sdb
Feb 22 13:03:43 partman-lvm:   Found duplicate PV 
HoUN7toMf0CJXuWQ0ZQKTY5Q9ynivkGh: using /dev/sdd not /dev/sdc
Feb 22 13:03:43 partman-lvm:   Found duplicate PV 
HoUN7toMf0CJXuWQ0ZQKTY5Q9ynivkGh: using /dev/sde not /dev/sdd
Feb 22 13:03:43 partman-lvm:   Found duplicate PV 
HoUN7toMf0CJXuWQ0ZQKTY5Q9ynivkGh: using /dev/sdf not /dev/sde
Feb 22 13:03:43 partman-lvm:   Found duplicate PV 
HoUN7toMf0CJXuWQ0ZQKTY5Q9ynivkGh: using /dev/sdg not /dev/sdf
Feb 22 13:03:43 partman-lvm:   Found duplicate PV 
HoUN7toMf0CJXuWQ0ZQKTY5Q9ynivkGh: using /dev/sdh not /dev/sdg
Feb 22 13:03:43 partman-lvm:   Found duplicate PV 
HoUN7toMf0CJXuWQ0ZQKTY5Q9ynivkGh: using /dev/sdi not /dev/sdh

Grub2 seems to be installed without errors.
Feb 22 13:14:29 grub-installer: info: Installing grub on '/dev/cciss/c0d0'
Feb 22 13:14:29 grub-installer: info: grub-install supports --no-floppy
Feb 22 13:14:29 grub-installer: info: Running chroot /target grub-install  --
no-floppy --force "/dev/cciss/c0d0"
Feb 22 13:14:32 grub-installer: Installation finished. No error reported.
Feb 22 13:14:32 grub-installer: info: grub-install ran successfully


Any ideas?

-- 
Melhores cumprimentos/Best regards,

Miguel Figueiredo
http://www.DebianPT.org


Reply to: