Bug#613208: No Kbd/Mouse/Display after 6.0.0 Upgrade/Installation
Package: installation-reports
Severity: critical
Justification: breaks the whole system
First I tried to upgrade, after this failed I tried a clean install:
same Problem
Starting the recovery console works, but starting Xorg hangs the
computer again: Messy graphical display,
Mouse and Keyboard dead.
Maybe a xserver problem withe the ATI Rage 128 graphic card, the upgrade
from Lenny to Squeeze worked
on an even older PC with an ATI Mach64 grapic card
-- Package-specific info:
Boot method: CD
Image version: [Debian GNU/Linux 6.0.0 _Squeeze_ - Official i368 DVD
Binary-1 20110205-17:27] squeeze contrib main
Date: 2011-02-13 14:30
Machine: Terra P3-1000: ASUS TUSL2C, Intel P3-1000, ATI Rage128, 500G WD
Caviar Blue, Nec-DVD
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 479730448 3602592 451758912 1% /
tmpfs tmpfs 257336 0 257336 0% /lib/init/rw
udev tmpfs 252988 204 252784 1% /dev
tmpfs tmpfs 257336 0 257336 0% /dev/shm
/dev/sdb1 vfat 1957600 10688 1946912 1% /mnt
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Starting the system from harddisk after the installation hangs the PC
when switching from
text to graphics
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer hardware-summary:
==============================================
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host
Bridge and Memory Controller Hub
[8086:1130] (rev 04)
00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP
Bridge [8086:1131] (rev 04)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 02)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC)
[8086:2440] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100
Controller [8086:244b] (rev 02)
00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB
Controller #1 [8086:2442] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller
[8086:2443] (rev 02)
00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB
Controller #1 [8086:2444] (rev 02)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128
Pro Ultra TF [1002:5446]
02:0a.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX
[Cyclone] [10b7:9055] (rev 30)
02:0c.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03)
02:0c.1 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03)
02:0c.2 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03)
02:0c.3 USB Controller [0c03]: ALi Corporation USB 2.0 Controller
[10b9:5239] (rev 01)
02:0c.4 FireWire (IEEE 1394) [0c00]: ALi Corporation M5253 P1394 OHCI
1.1 Controller [10b9:5253]
02:0e.0 Multimedia audio controller [0401]: Ensoniq ES1371 [AudioPCI-97]
[1274:1371] (rev 08)
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host
Bridge and Memory Controller Hub
[8086:1130] (rev 04)
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [88] Vendor Specific Information: Len=04 <?>
Capabilities: [a0] AGP version 2.0
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP
Bridge [8086:1131] (rev 04) (prog-if 00
[Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f3000000-f3dfffff
Prefetchable memory behind bridge: f3f00000-f7ffffff
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 02) (prog-if 00 [Normal
decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: f3e00000-f3efffff
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC)
[8086:2440] (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100
Controller [8086:244b] (rev 02) (prog-if 80
[Master])
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Flags: bus master, medium devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at a800 [size=16]
Kernel driver in use: ata_piix
00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB
Controller #1 [8086:2442] (rev 02) (prog-if
00 [UHCI])
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at a400 [size=32]
Kernel driver in use: uhci_hcd
00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller
[8086:2443] (rev 02)
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Flags: medium devsel, IRQ 17
I/O ports at e800 [size=16]
00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB
Controller #1 [8086:2444] (rev 02) (prog-if
00 [UHCI])
Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard [1043:8027]
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at a000 [size=32]
Kernel driver in use: uhci_hcd
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128
Pro Ultra TF [1002:5446] (prog-if 00
[VGA controller])
Subsystem: ATI Technologies Inc Rage Fury Pro/Xpert 2000 Pro [1002:0008]
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
Memory at f4000000 (32-bit, prefetchable) [size=64M]
I/O ports at d800 [size=256]
Memory at f3000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f3fe0000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 2
02:0a.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX
[Cyclone] [10b7:9055] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at b800 [size=128]
Memory at f2800000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at f3e00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Kernel driver in use: 3c59x
02:0c.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation Device [10b9:5272]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 21
Memory at f2000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Kernel driver in use: ohci_hcd
02:0c.1 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation Device [10b9:5272]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 21
Memory at f1800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Kernel driver in use: ohci_hcd
02:0c.2 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation Device [10b9:5272]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 21
Memory at f1000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Kernel driver in use: ohci_hcd
02:0c.3 USB Controller [0c03]: ALi Corporation USB 2.0 Controller
[10b9:5239] (rev 01) (prog-if 20 [EHCI])
Subsystem: ALi Corporation Device [10b9:5272]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 20
Memory at f0800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=0090
Kernel driver in use: ehci_hcd
02:0c.4 FireWire (IEEE 1394) [0c00]: ALi Corporation M5253 P1394 OHCI
1.1 Controller [10b9:5253] (prog-if 10
[OHCI])
Subsystem: ALi Corporation M5253 P1394 OHCI 1.1 Controller [10b9:5253]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 22
Memory at f0000000 (32-bit, non-prefetchable) [size=2K]
[virtual] Expansion ROM at f3e20000 [disabled] [size=64K]
Capabilities: [80] Power Management version 2
Kernel driver in use: firewire_ohci
02:0e.0 Multimedia audio controller [0401]: Ensoniq ES1371 [AudioPCI-97]
[1274:1371] (rev 08)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
[1274:1371]
Flags: bus master, slow devsel, latency 32, IRQ 18
I/O ports at b400 [size=64]
Capabilities: [dc] Power Management version 1
Kernel driver in use: ENS1371
Reply to: