Bug#610715: Acknowledgement (installation report rc1 : regression from beta 2)
On 21.01.2011 18:18, Debian Bug Tracking System wrote:
Thank you for filing a new Bug report with Debian.
...but apparently the attachments were too big, so it never hit the
mailing list. I resend this bug report without the attachments:
---------------------------------------------------------------
Package: installation-reports
Boot method: Beta2 amd64 DVD, selected desktop KDE, graphical installation
Image version:
http://cdimage.debian.org/cdimage/squeeze_di_rc1/amd64/jigdo-dvd/debian-sq-di-rc1-amd64-DVD-1.jigdo
Date: 19-JAN-2011
Machine: made from parts, MoBo Gigabyte
Processor: AMD Athlon64 X2 5050e 2.6 GHz
Memory: 4 Gbyte RAM
Partitions:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000264af
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4863 39062016 83 Linux
/dev/sda2 4864 5957 8787555 82 Linux swap
/dev/sda3 * 5958 10212 34178287+ 83 Linux
/dev/sda4 10213 14593 35189729+ 5 Extended
/dev/sda5 12242 14593 18892408+ bc Unknown
/dev/sda6 10213 12241 16296960 83 Linux
Partition table entries are not in disk order
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host
Bridge [1022:9600]
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI
bridge (ext gfx port 0) [1022:9603]
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI
bridge (PCIE port 5) [1022:9609]
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [AHCI mode] [1002:4391]
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397]
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
Controller [1002:4398]
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
Controller [1002:4398]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
[1002:4385] (rev 3a)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE
Controller [1002:439c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel
HDA) [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
controller [1002:439d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384]
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI2 Controller [1002:4399]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: nVidia Corporation GT215
[GeForce GT 240] [10de:0ca3] (rev a2)
01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio
Controller [10de:0be4] (rev a1)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
(rev 02)
03:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [E ]
Install boot loader: [O ]
Overall install: [E ]
Comments/Problems:
This installation is nearly identical to #605942 (which was a full success),
only differences:
- graphical install instead of text mode
- second harddisk removed
Problems:
- Xserver does not start properly, only shows a black screen (output of
/usr/share/bugs/xorg/script is attached, xrandr says: can't open display)
- KDM not installed (/etc/init.d/kdm: file not found)
- apt-get offers to remove virtually all of KDE with the autoremove option
Fortunately, I did not sacrifice the working beta2 install for this
experiment,
but used the Windows 7 partition :-)) But now I do not dare to update
from beta2...
cu
Herbert
--
Reply to: