--- Begin Message ---
Package: installation-reports
Boot method: <DVD Lenny 5.0.3>
Image version:
<ftp://vesta.informatik.rwth-aachen.de/pub/comp/Linux/debian-cd/5.0.3/amd64/iso-dvd/debian-503-amd64-DVD-1.iso>
Date: <somewhere july 2010>
Machine: <home build from separate parts; an Intel with 4 cores.
Output from "lspci":
hopp@brane:~$ lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM
Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express
Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA
AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus
Controller
01:00.0 VGA compatible controller: nVidia Corporation Device 0641 (rev
a1)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II
Controller (rev b2)
04:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit
Ethernet Controller (rev 05)
and excerpt from "dmidecode":
> Manufacturer: ASUSTeK Computer INC.
> Product Name: P5Q DELUXE
equipped with 2 GB of DDR-II RAM.
Partitions: df -Tl
Dateisystem Typ 1K-Blöcke Benutzt Verfügbar Ben% Eingehängt auf
/dev/sda1 ext3 57866432 1347116 56519316 3% /
tmpfs tmpfs 1031488 8 1031480 1% /lib/init/rw
udev tmpfs 10240 844 9396 9% /dev
tmpfs tmpfs 1031488 0 1031488 0% /dev/shm
/dev/sda3 ext3 192243960 3712460 188531500 2% /usr
/dev/sda4 ext3 466155620 107775040 358380580 24% /home
(all on one Western Digital disk)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O] a Gigabit PCI card with Intel chipset
Configure network: [O] static IPv4 (192.168.x.y)
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O] all three SATA are fine
Partition hard drives: [O] no problems
Install base system: [O]
Clock/timezone setup: [O] Europe/Berlin
User/password setup: [O] just two user accounts added
Install tasks: [O]
Install boot loader: [lilo!!]
Overall install: [O]
Comments/Problems:
the inclusion of Lilo in Debian is appreciated.
Tried Grub2, felt confused by its overly usage of modules and wiped
it!
Tried Grub-legacy which worked nice as expected but was attracted
by oldschool pure Lilo which works perfectly on /dev/sda with 750 GB.
I selected OFF all the tasks (desktop and standard) and did my
own selection of GNOME desktop with GDM, iceceasel, liferea
and OpenOffice.Org. Machine is used as a Desktop including
doing statistical/mathematical programming mostly in "R".
Connection to a debian NFS4-storage(Backup) and to a Linux-based
package filter/Firewall. Setup of X11 was bit hassle, the Philips
190B monitor was not detected properly, so i inserted in the
xorg.conf line for full resolution of 1280x1024. Hotplugging USB
works fine, Sound (alsa) works fine.
All works well, even the NVidia graphics adapter with Nvidia legacy
kmod. Debian is GREAT.
Thanks a lot to all the debian developers,maintainers and supporters.
Hope you all enjoyed Christmas and wishing a happy new year with
Squeeze!
Bruno
Package: installation-reports
Boot method: <DVD Lenny 5.0.3>
Image version:
<ftp://vesta.informatik.rwth-aachen.de/pub/comp/Linux/debian-cd/5.0.3/amd64/iso-dvd/debian-503-amd64-DVD-1.iso>
Date: <july 2010>
Machine: <home build from separate bought parts;
a Intel with 4 cores. Output from "lspci":
hopp@brane:~$ lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM
Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express
Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA
AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus
Controller
01:00.0 VGA compatible controller: nVidia Corporation Device 0641 (rev
a1)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II
Controller (rev b2)
04:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit
Ethernet Controller (rev 05)
Partitions: df -Tl
Dateisystem Typ 1K-Blöcke Benutzt Verfügbar Ben% Eingehängt auf
/dev/sda1 ext3 57866432 1347116 56519316 3% /
tmpfs tmpfs 1031488 8 1031480 1% /lib/init/rw
udev tmpfs 10240 844 9396 9% /dev
tmpfs tmpfs 1031488 0 1031488 0% /dev/shm
/dev/sda3 ext3 192243960 3712460 188531500 2% /usr
/dev/sda4 ext3 466155620 107775040 358380580 24% /home
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O] a Gigabit PCI card with Intel chipset
Configure network: [O] static IPv4 (192.168.x.y)
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O] all three SATA are fine
Partition hard drives: [O] no problems
Install base system: [O]
Clock/timezone setup: [O] Europe/Berlin
User/password setup: [O] just two user accounts added
Install tasks: [O]
Install boot loader: [lilo!!]
Overall install: [O]
Comments/Problems:
the inclusion of Lilo in Debian is appreciated. Did try Grub2,
felt confused by its overly usage of modules and deselected it.
Tried Grub-legacy which worked nice as expected but was attracted
by the pure Lilo which also works perfectly.
I selected OFF all the tasks (desktop and standard) and did my
own selection of GNOME desktop with GDM, iceceasel, liferea
and OpenOffice.Org. Machine is used as a Desktop including
doing statistical/mathematical programming mostly in "R".
Connection to a debian NFS4-storage(Backup) and to a Linux-based
package
filter/Firewall. Setup of X11 was bit hassle, the Philips 190B
monitor was not detected properly, so i inserted in the xorg.conf
line for full resolution of 1280x1024. All works well, even
the NVidia graphics adapter. Debian is GREAT!
Thanks a lot to all the debian developers and maintainers,
Partitions: df -Tl
Dateisystem Typ 1K-Blöcke Benutzt Verfügbar Ben% Eingehängt auf
/dev/sda1 ext3 57866432 1347116 56519316 3% /
tmpfs tmpfs 1031488 8 1031480 1% /lib/init/rw
udev tmpfs 10240 844 9396 9% /dev
tmpfs tmpfs 1031488 0 1031488 0% /dev/shm
/dev/sda3 ext3 192243960 3712460 188531500 2% /usr
/dev/sda4 ext3 466155620 107775040 358380580 24% /home
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O] a Gigabit PCI card with Intel chipset
Configure network: [O] static IPv4 (192.168.x.y)
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O] all three SATA are fine
Partition hard drives: [O] no problems
Install base system: [O]
Clock/timezone setup: [O] Europe/Berlin
User/password setup: [O] just two user accounts added
Install tasks: [O]
Install boot loader: [lilo!!]
Overall install: [O]
Comments/Problems:
the inclusion of Lilo in Debian is appreciated. Did try Grub2,
felt confused by its overly usage of modules and deselected it.
Tried Grub-legacy which worked nice as expected but was attracted
by the pure Lilo which also works perfectly.
I selected OFF all the tasks (desktop and standard) and did my
own selection of GNOME desktop with GDM, iceceasel, liferea
and OpenOffice.Org. Machine is used as a Desktop including
doing statistical/mathematical programming mostly in "R".
Connection to a debian NFS4-storage(Backup) and to a Linux-based
package
filter/Firewall. Setup of X11 was bit hassle, the Philips 190B
monitor was not detected properly, so i inserted in the xorg.conf
line for full resolution of 1280x1024. All works well, even
the NVidia graphics adapter. Debian is GREAT!
Thanks a lot to all the debian developers and maintainers,
Partitions: df -Tl
Dateisystem Typ 1K-Blöcke Benutzt Verfügbar Ben% Eingehängt auf
/dev/sda1 ext3 57866432 1347116 56519316 3% /
tmpfs tmpfs 1031488 8 1031480 1% /lib/init/rw
udev tmpfs 10240 844 9396 9% /dev
tmpfs tmpfs 1031488 0 1031488 0% /dev/shm
/dev/sda3 ext3 192243960 3712460 188531500 2% /usr
/dev/sda4 ext3 466155620 107775040 358380580 24% /home
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O] a Gigabit PCI card with Intel chipset
Configure network: [O] static IPv4 (192.168.x.y)
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O] all three SATA are fine
Partition hard drives: [O] no problems
Install base system: [O]
Clock/timezone setup: [O] Europe/Berlin
User/password setup: [O] just two user accounts added
Install tasks: [O]
Install boot loader: [lilo!!]
Overall install: [O]
Comments/Problems:
the inclusion of Lilo in Debian is appreciated. Did try Grub2,
felt confused by its overly usage of modules and deselected it.
Tried Grub-legacy which worked nice as expected but was attracted
by the pure Lilo which also works perfectly.
I selected OFF all the tasks (desktop and standard) and did my
own selection of GNOME desktop with GDM, iceceasel, liferea
and OpenOffice.Org. Machine is used as a Desktop including
doing statistical/mathematical programming mostly in "R".
Connection to a debian NFS4-storage(Backup) and to a Linux-based
package
filter/Firewall. Setup of X11 was bit hassle, the Philips 190B
monitor was not detected properly, so i inserted in the xorg.conf
line for full resolution of 1280x1024. All works well, even
the NVidia graphics adapter. Debian is GREAT!
Thanks a lot to all the debian developers and maintainers,
--- End Message ---