--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-reports: Squeeze Install on Dell R210: successful after workaround
- From: Tracy R Wald <tracy@22cal.com>
- Date: Mon, 25 Oct 2010 11:24:55 -0500
- Message-id: <20101025162455.4659.41727.reportbug@w-1.22cal.com>
Package: installation-reports
Severity: normal
Tags: squeeze dell perc H200 raid usb broadcom bnx2
-- Package-specific info:
Boot method: CD
Image version: debian-testing-i386-netinst.iso 22-OCT-10
Date: 24-OCT-10 1700
Machine: DELL R210 2GB PERC H200 RAID -> RAID-1 2 250GB SATA
Partitions:
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Installer promped for installation of USB memory stick with the Broadcom
bnx2 firmware set, but wouldn't find the files after I inserted the memory
stick. I had done it this way while trying load Lenny, which worked properly.
(Couldn't use Lenny though, because the PERC H200 isn't supported).
After going to a shell and examining the log, the mount was failing, and
it looked like the mount device for the USB memory was wrong. Was able
to mount manually (mount /dev/sdc1 /media) and verify the USB was readable.
Before trying other options, I rebooted and restarted the
install, this time with the USB stick already inserted. The memory stick
mounted properly this way, and the installation continued normally.
The PERC H200 appears to be functioning correctly.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="6.0 (squeeze) - installer build 20101022-15:53"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux w-1 2.6.32-5-486 #1 Thu Oct 14 16:56:52 UTC 2010 i686 GNU/Linux
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0048] (rev 12)
lspci -knn: Subsystem: Dell Device [1028:02a5]
lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0049] (rev 12)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
lspci -knn: Subsystem: Dell Device [1028:02a5]
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
lspci -knn: Subsystem: Dell Device [1028:02a5]
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5)
lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 3400 Series Chipset LPC Interface Controller [8086:3b14] (rev 05)
lspci -knn: Subsystem: Dell Device [1028:02a5]
lspci -knn: 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 05)
lspci -knn: Subsystem: Dell Device [1028:02a5]
lspci -knn: Kernel driver in use: ahci
lspci -knn: 01:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 02)
lspci -knn: Subsystem: Dell Device [1028:1f1d]
lspci -knn: Kernel driver in use: mpt2sas
lspci -knn: 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
lspci -knn: Subsystem: Dell Device [1028:02a5]
lspci -knn: Kernel driver in use: bnx2
lspci -knn: 02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
lspci -knn: Subsystem: Dell Device [1028:02a5]
lspci -knn: Kernel driver in use: bnx2
lspci -knn: 03:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a)
lspci -knn: Subsystem: Dell Device [1028:02a5]
usb-list:
usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 2.6.32-5-486 ehci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 01 Device 02: EHCI Host Controller [8087:0020]
usb-list: Level 01 Parent 01 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 02 Device 01: EHCI Host Controller [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 2.6.32-5-486 ehci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 02 Device 02: EHCI Host Controller [8087:0020]
usb-list: Level 01 Parent 01 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 02 Device 03: UC-10KM V1.3.124 [0557:2221]
usb-list: Level 02 Parent 02 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer: ATEN
usb-list: Interface 00: Class 03(HID ) Subclass 01 Protocol 01 Driver usbhid
usb-list: Interface 01: Class 03(HID ) Subclass 01 Protocol 02 Driver usbhid
usb-list:
usb-list: Bus 02 Device 04: UC-10KM V1.3.124 [0424:2514]
usb-list: Level 02 Parent 02 Port 04 Class 09(hub ) Subclass 00 Protocol 02
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 02 Driver hub
lsmod: Module Size Used by
lsmod: ufs 55298 0
lsmod: qnx4 5078 0
lsmod: ntfs 161855 0
lsmod: reiserfs 172676 0
lsmod: dm_mod 45725 0
lsmod: md_mod 65999 0
lsmod: xfs 403634 0
lsmod: exportfs 2454 1 xfs
lsmod: jfs 132972 0
lsmod: ext4 239745 0
lsmod: jbd2 48167 1 ext4
lsmod: crc16 1027 1 ext4
lsmod: ext3 92368 3
lsmod: jbd 27750 1 ext3
lsmod: crc32c 2172 1
lsmod: libcrc32c 730 0
lsmod: ext2 45062 0
lsmod: mbcache 3482 3 ext4,ext3,ext2
lsmod: bnx2 50700 0
lsmod: ide_gd_mod 17107 0
lsmod: nls_cp437 4489 0
lsmod: vfat 6502 0
lsmod: fat 34344 1 vfat
lsmod: mpt2sas 81468 4
lsmod: scsi_transport_sas 15117 1 mpt2sas
lsmod: nls_utf8 908 0
lsmod: isofs 24384 0
lsmod: rsrc_nonstatic 7061 0
lsmod: pcmcia_core 20474 1 rsrc_nonstatic
lsmod: ide_generic 801 0 [permanent]
lsmod: ide_core 59362 2 ide_gd_mod,ide_generic
lsmod: sd_mod 25757 5
lsmod: crc_t10dif 1012 1 sd_mod
lsmod: psmouse 48378 0
lsmod: fan 2590 0
lsmod: usb_storage 30377 0
lsmod: evdev 5520 2
lsmod: usbhid 27440 0
lsmod: hid 50580 1 usbhid
lsmod: sg 16435 0
lsmod: sr_mod 10734 0
lsmod: cdrom 26475 1 sr_mod
lsmod: ahci 27318 0
lsmod: ehci_hcd 27753 0
lsmod: thermal 9210 0
lsmod: libata 117059 1 ahci
lsmod: thermal_sys 9346 2 fan,thermal
lsmod: usbcore 97941 4 usb_storage,usbhid,ehci_hcd
lsmod: nls_base 4445 8 ntfs,jfs,nls_cp437,vfat,fat,nls_utf8,isofs,usbcore
lsmod: scsi_mod 102061 7 mpt2sas,scsi_transport_sas,sd_mod,usb_storage,sg,sr_mod,libata
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: tmpfs 1032980 60 1032920 0% /dev
df: /dev/sdb5 48060296 3376408 42242520 7% /target
df: /dev/sdb6 1921036 35684 1787768 2% /target/tmp
df: /dev/sdb8 185673716 426004 175815956 0% /target/var
df: /dev/sdb5 48060296 3376408 42242520 7% /dev/.static/dev
df: tmpfs 1032980 60 1032920 0% /target/dev
free: total used free shared buffers
free: Mem: 2065964 1508392 557572 0 230436
free: Swap: 1951736 0 1951736
free: Total: 4017700 1508392 2509308
/proc/cmdline: video=vesa:ywrap,mtrr vga=788 initrd=/install.386/gtk/initrd.gz -- quiet BOOT_IMAGE=/install.386/vmlinuz
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 37
/proc/cpuinfo: model name : Intel(R) Pentium(R) CPU G6950 @ 2.80GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2793.152
/proc/cpuinfo: cache size : 3072 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 11
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm popcnt lahf_lm arat tpr_shadow vnmi flexpriority ept vpid
/proc/cpuinfo: bogomips : 5586.30
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-007f : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide_generic
/proc/ioports: 01f0-01f7 : ide_generic
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : ide_generic
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : ide_generic
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0800-087f : pnp 00:07
/proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK
/proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK
/proc/ioports: 0808-080b : ACPI PM_TMR
/proc/ioports: 0820-082f : ACPI GPE0_BLK
/proc/ioports: 0850-0850 : ACPI PM2_CNT_BLK
/proc/ioports: 0880-08ff : pnp 00:07
/proc/ioports: 0900-091f : pnp 00:07
/proc/ioports: 0920-0923 : pnp 00:07
/proc/ioports: 0924-0924 : pnp 00:07
/proc/ioports: 0ca0-0ca7 : pnp 00:07
/proc/ioports: 0ca8-0ca8 : pnp 00:08
/proc/ioports: 0ca9-0cab : pnp 00:07
/proc/ioports: 0cac-0cac : pnp 00:08
/proc/ioports: 0cad-0caf : pnp 00:07
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: ecc8-eccb : 0000:00:1f.2
/proc/ioports: ecc8-eccb : ahci
/proc/ioports: eccc-eccf : 0000:00:1f.2
/proc/ioports: eccc-eccf : ahci
/proc/ioports: ecd0-ecd7 : 0000:00:1f.2
/proc/ioports: ecd0-ecd7 : ahci
/proc/ioports: ecd8-ecdf : 0000:00:1f.2
/proc/ioports: ecd8-ecdf : ahci
/proc/ioports: ece0-ecff : 0000:00:1f.2
/proc/ioports: ece0-ecff : ahci
/proc/ioports: f000-ffff : PCI Bus 0000:01
/proc/ioports: fc00-fcff : 0000:01:00.0
/proc/iomem: 00000000-0009bfff : System RAM
/proc/iomem: 0009c000-0009ffff : RAM buffer
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000c8000-000c8fff : Adapter ROM
/proc/iomem: 000c9000-000cb5ff : Adapter ROM
/proc/iomem: 000cb800-000d0fff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7f698fff : System RAM
/proc/iomem: 01000000-01247e7e : Kernel code
/proc/iomem: 01247e7f-01363a7f : Kernel data
/proc/iomem: 013d1000-0144da27 : Kernel bss
/proc/iomem: 7f699000-7f6aefff : reserved
/proc/iomem: 7f6af000-7f6cdfff : ACPI Tables
/proc/iomem: 7f6ce000-7fffffff : reserved
/proc/iomem: d9800000-d9ffffff : PCI Bus 0000:03
/proc/iomem: d9800000-d9ffffff : 0000:03:03.0
/proc/iomem: d9800000-d9ffffff : vesafb
/proc/iomem: da000000-ddffffff : PCI Bus 0000:02
/proc/iomem: da000000-dbffffff : 0000:02:00.0
/proc/iomem: da000000-dbffffff : bnx2
/proc/iomem: dc000000-ddffffff : 0000:02:00.1
/proc/iomem: dc000000-ddffffff : bnx2
/proc/iomem: de000000-deffffff : PCI Bus 0000:03
/proc/iomem: de000000-de00ffff : 0000:03:03.0
/proc/iomem: de7fc000-de7fffff : 0000:03:03.0
/proc/iomem: de800000-deffffff : 0000:03:03.0
/proc/iomem: df0fa000-df0fa3ff : 0000:00:1a.0
/proc/iomem: df0fa000-df0fa3ff : ehci_hcd
/proc/iomem: df0fc000-df0fc3ff : 0000:00:1d.0
/proc/iomem: df0fc000-df0fc3ff : ehci_hcd
/proc/iomem: df0fe000-df0fe7ff : 0000:00:1f.2
/proc/iomem: df0fe000-df0fe7ff : ahci
/proc/iomem: df100000-df2fffff : PCI Bus 0000:01
/proc/iomem: df100000-df1fffff : 0000:01:00.0
/proc/iomem: df2b0000-df2bffff : 0000:01:00.0
/proc/iomem: df2b0000-df2bffff : mpt2sas
/proc/iomem: df2c0000-df2fffff : 0000:01:00.0
/proc/iomem: df2c0000-df2fffff : mpt2sas
/proc/iomem: e0000000-efffffff : PCI MMCONFIG 0 [00-ff]
/proc/iomem: e0000000-efffffff : reserved
/proc/iomem: e0000000-efffffff : pnp 00:0a
/proc/iomem: fe000000-ffffffff : reserved
/proc/iomem: fec00000-fec00fff : IOAPIC 0
/proc/iomem: fed00000-fed003ff : HPET 0
/proc/iomem: fed50000-fed53fff : pnp 00:0c
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/interrupts: CPU0
/proc/interrupts: 0: 43 IO-APIC-edge timer
/proc/interrupts: 3: 2 IO-APIC-edge
/proc/interrupts: 4: 2 IO-APIC-edge
/proc/interrupts: 8: 8 IO-APIC-edge rtc0
/proc/interrupts: 9: 0 IO-APIC-fasteoi acpi
/proc/interrupts: 14: 0 IO-APIC-edge ide0
/proc/interrupts: 15: 0 IO-APIC-edge ide1
/proc/interrupts: 22: 16150 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2
/proc/interrupts: 24: 52939 HPET_MSI-edge hpet2
/proc/interrupts: 27: 3011 PCI-MSI-edge ahci
/proc/interrupts: 28: 313387 PCI-MSI-edge mpt2sas0
/proc/interrupts: 29: 1260465 PCI-MSI-edge eth0
/proc/interrupts: NMI: 0 Non-maskable interrupts
/proc/interrupts: LOC: 1171840 Local timer interrupts
/proc/interrupts: SPU: 0 Spurious interrupts
/proc/interrupts: PMI: 0 Performance monitoring interrupts
/proc/interrupts: PND: 0 Performance pending work
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 2065964 kB
/proc/meminfo: MemFree: 557636 kB
/proc/meminfo: Buffers: 230436 kB
/proc/meminfo: Cached: 1142368 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 535696 kB
/proc/meminfo: Inactive: 811980 kB
/proc/meminfo: Active(anon): 1556 kB
/proc/meminfo: Inactive(anon): 34092 kB
/proc/meminfo: Active(file): 534140 kB
/proc/meminfo: Inactive(file): 777888 kB
/proc/meminfo: Unevictable: 60332 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: HighTotal: 1178220 kB
/proc/meminfo: HighFree: 408356 kB
/proc/meminfo: LowTotal: 887744 kB
/proc/meminfo: LowFree: 149280 kB
/proc/meminfo: SwapTotal: 1951736 kB
/proc/meminfo: SwapFree: 1951736 kB
/proc/meminfo: Dirty: 1356 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 35228 kB
/proc/meminfo: Mapped: 10096 kB
/proc/meminfo: Shmem: 444 kB
/proc/meminfo: Slab: 85492 kB
/proc/meminfo: SReclaimable: 79756 kB
/proc/meminfo: SUnreclaim: 5736 kB
/proc/meminfo: KernelStack: 600 kB
/proc/meminfo: PageTables: 420 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 2984716 kB
/proc/meminfo: Committed_AS: 46928 kB
/proc/meminfo: VmallocTotal: 122880 kB
/proc/meminfo: VmallocUsed: 11032 kB
/proc/meminfo: VmallocChunk: 108968 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 4096 kB
/proc/meminfo: DirectMap4k: 12280 kB
/proc/meminfo: DirectMap4M: 897024 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=0557 Product=2221 Version=0110
/proc/bus/input/devices: N: Name="ATEN UC-10KM V1.3.124"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-1.1/input0
/proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input0
/proc/bus/input/devices: U: Uniq=USB Composite device
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=0557 Product=2221 Version=0110
/proc/bus/input/devices: N: Name="ATEN UC-10KM V1.3.124"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-1.1/input1
/proc/bus/input/devices: S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input1
/proc/bus/input/devices: U: Uniq=USB Composite device
/proc/bus/input/devices: H: Handlers=mouse0 event1
/proc/bus/input/devices: B: EV=17
/proc/bus/input/devices: B: KEY=1f0000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices:
/proc/fb: 0 VESA VGA
dfbinfo: not found
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--- End Message ---
--- Begin Message ---
- To: 601382-done@bugs.debian.org
- Subject: Re: Bug#601382: installation-reports: Squeeze Install on Dell R210: successful after workaround
- From: Denis Laxalde <dlaxalde@gmail.com>
- Date: Sat, 4 Dec 2010 11:32:04 -0500
- Message-id: <20101204113204.50f4a47c@mail.gmail.com>
- In-reply-to: <20101025162455.4659.41727.reportbug@w-1.22cal.com>
- References: <20101025162455.4659.41727.reportbug@w-1.22cal.com>
On Mon, 25 Oct 2010 11:24:55 -0500, Tracy R Wald wrote:
> Package: installation-reports
> Severity: normal
> Tags: squeeze dell perc H200 raid usb broadcom bnx2
>
> Boot method: CD
> Image version: debian-testing-i386-netinst.iso 22-OCT-10
> Date: 24-OCT-10 1700
[...]
> Installer promped for installation of USB memory stick with the
> Broadcom bnx2 firmware set, but wouldn't find the files after I
> inserted the memory stick. I had done it this way while trying load
> Lenny, which worked properly. (Couldn't use Lenny though, because the
> PERC H200 isn't supported).
>
> After going to a shell and examining the log, the mount was failing,
> and it looked like the mount device for the USB memory was wrong.
> Was able to mount manually (mount /dev/sdc1 /media) and verify the
> USB was readable. Before trying other options, I rebooted and
> restarted the install, this time with the USB stick already
> inserted. The memory stick mounted properly this way, and the
> installation continued normally.
>
> The PERC H200 appears to be functioning correctly.
Thanks for your time testing the Debian Installer and reporting your
results. As your installation was successful, the bug can now be closed.
Have fun with your new Debian system!
--- End Message ---