Bug#604560: Isn't this the same as #604245?

[Ferenc Wagner <wferi@niif.hu>]

Hi,

Please try the following: instead of extracting boot.img.gz straight
into your pendrive (zcat boot.img.gz >/dev/sdX), create a DOS partition
table on the pendrive with an at least 250MB large first partition, make
the partition active (bootable), and extract boot.img.gz into that
partition (zcat boot.img.gz >/dev/sdX1).  Also put some boot code into
the MBR (cat /usr/lib/syslinux/mbr.bin >/dev/sdX after installing the
syslinux package), then try booting from it again.
-- 
Thanks,
Feri.