Re: Bug#601721: installation-reports: Build w/ /boot partition succeeds, but re-boot fails in fsck 445148
There was no changes to the bios system. The system was installed then rebooted.
Attached is the dmesg.
Thanks,
Lucas
On Thu, Oct 28, 2010 at 6:08 PM, Samuel Thibault <sthibault@debian.org> wrote:
> Lukasz Szybalski, le Thu 28 Oct 2010 17:39:59 -0500, a écrit :
>> 3. Can someone explain why installer mounts sda as my 1GB and sdb as
>> 1.7TB, but after re-boot system swaps them and uses 1.7TB as /sda and
>> 1Gb as sdb?
>
> It looks like a hardware detection order issue. Do you modify a bios
> parameter to boot on the installed system instead of the debian
> installer? You should probably post the output of dmesg.
>
> Samuel
>
>
> --
> To UNSUBSCRIBE, email to debian-boot-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> Archive: [🔎] 20101028230818.GQ4884@const.famille.thibault.fr">http://lists.debian.org/[🔎] 20101028230818.GQ4884@const.famille.thibault.fr
>
>
>
>
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-26) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Oct 20 00:05:22 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/uicesv15-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df699000 (usable)
[ 0.000000] BIOS-e820: 00000000df699000 - 00000000df6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000df6af000 - 00000000df6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000df6ce000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 00000000fec90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec94000 - 00000000fecd0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecd4000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000420000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x420000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 4 base 000200000000 mask FFFE00000000 write-back
[ 0.000000] 5 base 000400000000 mask FFFFE0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000420000000 aka 16896M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdf699 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000df699000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00df600000 page 2M
[ 0.000000] 00df600000 - 00df699000 page 4k
[ 0.000000] kernel direct mapping tables up to df699000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000420000000
[ 0.000000] 0100000000 - 0400000000 page 1G
[ 0.000000] 0400000000 - 0420000000 page 2M
[ 0.000000] kernel direct mapping tables up to 420000000 @ a000-c000
[ 0.000000] RAMDISK: 37657000 - 37fefafd
[ 0.000000] ACPI: RSDP 00000000000f1450 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f14d8 000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000df6bbe60 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20090903/tbfadt-607)
[ 0.000000] ACPI: DSDT 00000000df6af000 08EC1 (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000df6be000 00040
[ 0.000000] ACPI: APIC 00000000df6bb478 00260 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000df6bb6dc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000df6bb730 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000df6bb76c 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000df6bb7ac 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000df6bb8e4 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000df6b8044 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000df6b82b4 00354 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000df6b7ec4 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000df6b7ef4 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: IV__ 00000000df6bba68 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000df6bba9c 00220 (v02 AMD F10 00000001 AMD 00000001)
[ 0.000000] ACPI: SLIT 00000000df6bbdb8 0003C (v01 AMD F10 00000001 AMD 00000001)
[ 0.000000] ACPI: SS__ 00000000df6bf000 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000df6bbdf8 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 4 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 5 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 6 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 7 -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 20 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 21 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 22 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 23 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 16 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 17 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 18 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 19 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-e0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-120000000
[ 0.000000] SRAT: Node 1 PXM 1 120000000-220000000
[ 0.000000] SRAT: Node 2 PXM 2 220000000-320000000
[ 0.000000] SRAT: Node 3 PXM 3 320000000-420000000
[ 0.000000] NUMA: Allocated memnodemap from b000 - 13440
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [0000000000013440 - 000000000001b43f]
[ 0.000000] bootmap [000000000001c000 - 000000000003ffff] pages 24
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 0120000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001688414] TEXT DATA BSS ==> [0001000000 - 0001688414]
[ 0.000000] #3 [0037657000 - 0037fefafd] RAMDISK ==> [0037657000 - 0037fefafd]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [0001689000 - 00016894fd] BRK ==> [0001689000 - 00016894fd]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] #8 [0000001000 - 000000103c] ACPI SLIT ==> [0000001000 - 000000103c]
[ 0.000000] #9 [000000b000 - 0000013440] MEMNODEMAP ==> [000000b000 - 0000013440]
[ 0.000000] Bootmem setup node 1 0000000120000000-0000000220000000
[ 0.000000] NODE_DATA [0000000120000000 - 0000000120007fff]
[ 0.000000] bootmap [0000000120008000 - 0000000120027fff] pages 20
[ 0.000000] (10 early reservations) ==> bootmem [0120000000 - 0220000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001688414] TEXT DATA BSS
[ 0.000000] #3 [0037657000 - 0037fefafd] RAMDISK
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved
[ 0.000000] #5 [0001689000 - 00016894fd] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE
[ 0.000000] #8 [0000001000 - 000000103c] ACPI SLIT
[ 0.000000] #9 [000000b000 - 0000013440] MEMNODEMAP
[ 0.000000] Bootmem setup node 2 0000000220000000-0000000320000000
[ 0.000000] NODE_DATA [0000000220000000 - 0000000220007fff]
[ 0.000000] bootmap [0000000220008000 - 0000000220027fff] pages 20
[ 0.000000] (10 early reservations) ==> bootmem [0220000000 - 0320000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001688414] TEXT DATA BSS
[ 0.000000] #3 [0037657000 - 0037fefafd] RAMDISK
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved
[ 0.000000] #5 [0001689000 - 00016894fd] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE
[ 0.000000] #8 [0000001000 - 000000103c] ACPI SLIT
[ 0.000000] #9 [000000b000 - 0000013440] MEMNODEMAP
[ 0.000000] Bootmem setup node 3 0000000320000000-0000000420000000
[ 0.000000] NODE_DATA [0000000320000000 - 0000000320007fff]
[ 0.000000] bootmap [0000000320008000 - 0000000320027fff] pages 20
[ 0.000000] (10 early reservations) ==> bootmem [0320000000 - 0420000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001688414] TEXT DATA BSS
[ 0.000000] #3 [0037657000 - 0037fefafd] RAMDISK
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved
[ 0.000000] #5 [0001689000 - 00016894fd] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE
[ 0.000000] #8 [0000001000 - 000000103c] ACPI SLIT
[ 0.000000] #9 [000000b000 - 0000013440] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
[ 0.000000] [ffffea0007700000-ffffea00077fffff] potential offnode page_structs
[ 0.000000] [ffffea0004000000-ffffea00077fffff] PMD -> [ffff880120200000-ffff8801239fffff] on node 1
[ 0.000000] [ffffea000af00000-ffffea000affffff] potential offnode page_structs
[ 0.000000] [ffffea0007800000-ffffea000affffff] PMD -> [ffff880220200000-ffff8802239fffff] on node 2
[ 0.000000] [ffffea000b000000-ffffea000e7fffff] PMD -> [ffff880320200000-ffff8803239fffff] on node 3
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00420000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000df699
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] 1: 0x00120000 -> 0x00220000
[ 0.000000] 2: 0x00220000 -> 0x00320000
[ 0.000000] 3: 0x00320000 -> 0x00420000
[ 0.000000] On node 0 totalpages: 1046073
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 111 pages reserved
[ 0.000000] DMA zone: 3833 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 896721 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x40] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x41] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x42] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x43] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x44] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x45] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x46] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x47] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x48] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x49] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x4a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x4b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x4c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x4d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x4e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x4f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x50] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x51] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x52] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x53] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x54] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x55] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x56] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x57] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x58] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x59] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x5a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x5b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x5c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x5d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x5e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x5f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec80000, GSI 24-55
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[56])
[ 0.000000] IOAPIC[2]: apic_id 2, version 33, address 0xfecc0000, GSI 56-87
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 64 CPUs, 48 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 88
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000df699000 - 00000000df6af000
[ 0.000000] PM: Registered nosave memory: 00000000df6af000 - 00000000df6ce000
[ 0.000000] PM: Registered nosave memory: 00000000df6ce000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fec90000
[ 0.000000] PM: Registered nosave memory: 00000000fec90000 - 00000000fec94000
[ 0.000000] PM: Registered nosave memory: 00000000fec94000 - 00000000fecd0000
[ 0.000000] PM: Registered nosave memory: 00000000fecd0000 - 00000000fecd4000
[ 0.000000] PM: Registered nosave memory: 00000000fecd4000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:64 nr_node_ids:4
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 02 04 06 16 20 24 28 32 36 40 44 48 52 56 60
[ 0.000000] pcpu-alloc: [1] 01 03 05 07 19 23 27 31 35 39 43 47 51 55 59 63
[ 0.000000] pcpu-alloc: [2] 08 10 12 14 17 21 25 29 33 37 41 45 49 53 57 61
[ 0.000000] pcpu-alloc: [3] 09 11 13 15 18 22 26 30 34 38 42 46 50 54 58 62
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 4132554
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/uicesv15-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 16445164k/17301504k available (3076k kernel code, 534300k absent, 322040k reserved, 1894k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=4
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:2008
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 88 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.099 MHz processor.
[ 0.012021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.18 BogoMIPS (lpj=8000372)
[ 0.012053] Security Framework initialized
[ 0.012057] SELinux: Disabled at boot.
[ 0.013390] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.019476] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022017] Mount-cache hash table entries: 256
[ 0.022217] Initializing cgroup subsys ns
[ 0.022220] Initializing cgroup subsys cpuacct
[ 0.022230] Initializing cgroup subsys devices
[ 0.022232] Initializing cgroup subsys freezer
[ 0.022234] Initializing cgroup subsys net_cls
[ 0.022263] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.022266] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.022268] CPU 0/0x0 -> Node 0
[ 0.022271] tseg: 00df800000
[ 0.022273] CPU: Physical Processor ID: 0
[ 0.022274] CPU: Processor Core ID: 0
[ 0.022277] mce: CPU supports 6 MCE banks
[ 0.022285] Performance Events: AMD PMU driver.
[ 0.022289] ... version: 0
[ 0.022291] ... bit width: 48
[ 0.022292] ... generic registers: 4
[ 0.022294] ... value mask: 0000ffffffffffff
[ 0.022296] ... max period: 00007fffffffffff
[ 0.022298] ... fixed-purpose events: 0
[ 0.022299] ... event mask: 000000000000000f
[ 0.023074] ACPI: Core revision 20090903
[ 0.032132] Setting APIC routing to physical flat
[ 0.032679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072424] CPU0: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.076001] Booting processor 1 APIC 0x10 ip 0x6000
[ 0.016000] Initializing CPU#1
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 1/0x10 -> Node 3
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 0
[ 0.160124] CPU1: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.160132] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164079] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.016000] Initializing CPU#2
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 2/0x1 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 1
[ 0.252103] CPU2: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.252110] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.256073] Booting processor 3 APIC 0x11 ip 0x6000
[ 0.016000] Initializing CPU#3
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 3/0x11 -> Node 3
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 1
[ 0.344070] CPU3: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.344077] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.348074] Booting processor 4 APIC 0x2 ip 0x6000
[ 0.016000] Initializing CPU#4
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 4/0x2 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 2
[ 0.436043] CPU4: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.436050] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.440071] Booting processor 5 APIC 0x12 ip 0x6000
[ 0.016000] Initializing CPU#5
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 5/0x12 -> Node 3
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 2
[ 0.528103] CPU5: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.528114] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.532080] Booting processor 6 APIC 0x3 ip 0x6000
[ 0.016000] Initializing CPU#6
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 6/0x3 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 3
[ 0.620089] CPU6: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.620095] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.624080] Booting processor 7 APIC 0x13 ip 0x6000
[ 0.016000] Initializing CPU#7
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 7/0x13 -> Node 3
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 3
[ 0.712085] CPU7: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.712091] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.716090] Booting processor 8 APIC 0x4 ip 0x6000
[ 0.016000] Initializing CPU#8
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 8/0x4 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 0
[ 0.804068] CPU8: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.804074] checking TSC synchronization [CPU#0 -> CPU#8]: passed.
[ 0.808094] Booting processor 9 APIC 0x14 ip 0x6000
[ 0.016000] Initializing CPU#9
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 9/0x14 -> Node 2
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 0
[ 0.896060] CPU9: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.896067] checking TSC synchronization [CPU#0 -> CPU#9]: passed.
[ 0.900083] Booting processor 10 APIC 0x5 ip 0x6000
[ 0.016000] Initializing CPU#10
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 10/0x5 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 1
[ 0.988033] CPU10: AMD Opteron(tm) Processor 6128 stepping 01
[ 0.988040] checking TSC synchronization [CPU#0 -> CPU#10]: passed.
[ 0.992097] Booting processor 11 APIC 0x15 ip 0x6000
[ 0.016000] Initializing CPU#11
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 11/0x15 -> Node 2
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 1
[ 1.080129] CPU11: AMD Opteron(tm) Processor 6128 stepping 01
[ 1.080146] checking TSC synchronization [CPU#0 -> CPU#11]: passed.
[ 1.084085] Booting processor 12 APIC 0x6 ip 0x6000
[ 0.016000] Initializing CPU#12
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 12/0x6 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 2
[ 1.172116] CPU12: AMD Opteron(tm) Processor 6128 stepping 01
[ 1.172137] checking TSC synchronization [CPU#0 -> CPU#12]: passed.
[ 1.176080] Booting processor 13 APIC 0x16 ip 0x6000
[ 0.016000] Initializing CPU#13
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 13/0x16 -> Node 2
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 2
[ 1.264108] CPU13: AMD Opteron(tm) Processor 6128 stepping 01
[ 1.264119] checking TSC synchronization [CPU#0 -> CPU#13]: passed.
[ 1.268093] Booting processor 14 APIC 0x7 ip 0x6000
[ 0.016000] Initializing CPU#14
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 14/0x7 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 3
[ 1.356117] CPU14: AMD Opteron(tm) Processor 6128 stepping 01
[ 1.356138] checking TSC synchronization [CPU#0 -> CPU#14]: passed.
[ 1.360092] Booting processor 15 APIC 0x17 ip 0x6000
[ 0.016000] Initializing CPU#15
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 15/0x17 -> Node 2
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 3
[ 1.448124] CPU15: AMD Opteron(tm) Processor 6128 stepping 01
[ 1.448138] checking TSC synchronization [CPU#0 -> CPU#15]: passed.
[ 1.452048] Brought up 16 CPUs
[ 1.452053] Total of 16 processors activated (64001.61 BogoMIPS).
[ 1.456202] CPU0 attaching sched-domain:
[ 1.456205] domain 0: span 0,2,4,6 level MC
[ 1.456208] groups: 0 2 4 6
[ 1.456214] domain 1: span 0-15 level NODE
[ 1.456216] groups: 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096)
[ 1.456228] CPU1 attaching sched-domain:
[ 1.456230] domain 0: span 1,3,5,7 level MC
[ 1.456232] groups: 1 3 5 7
[ 1.456237] domain 1: span 0-15 level NODE
[ 1.456239] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096)
[ 1.456250] CPU2 attaching sched-domain:
[ 1.456252] domain 0: span 0,2,4,6 level MC
[ 1.456254] groups: 2 4 6 0
[ 1.456259] domain 1: span 0-15 level NODE
[ 1.456261] groups: 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096)
[ 1.456271] CPU3 attaching sched-domain:
[ 1.456274] domain 0: span 1,3,5,7 level MC
[ 1.456275] groups: 3 5 7 1
[ 1.456280] domain 1: span 0-15 level NODE
[ 1.456282] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096)
[ 1.456292] CPU4 attaching sched-domain:
[ 1.456295] domain 0: span 0,2,4,6 level MC
[ 1.456297] groups: 4 6 0 2
[ 1.456301] domain 1: span 0-15 level NODE
[ 1.456303] groups: 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096)
[ 1.456313] CPU5 attaching sched-domain:
[ 1.456316] domain 0: span 1,3,5,7 level MC
[ 1.456317] groups: 5 7 1 3
[ 1.456322] domain 1: span 0-15 level NODE
[ 1.456324] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096)
[ 1.456334] CPU6 attaching sched-domain:
[ 1.456337] domain 0: span 0,2,4,6 level MC
[ 1.456339] groups: 6 0 2 4
[ 1.456343] domain 1: span 0-15 level NODE
[ 1.456345] groups: 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096)
[ 1.456355] CPU7 attaching sched-domain:
[ 1.456358] domain 0: span 1,3,5,7 level MC
[ 1.456359] groups: 7 1 3 5
[ 1.456364] domain 1: span 0-15 level NODE
[ 1.456366] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096)
[ 1.456376] CPU8 attaching sched-domain:
[ 1.456379] domain 0: span 8,10,12,14 level MC
[ 1.456380] groups: 8 10 12 14
[ 1.456385] domain 1: span 0-15 level NODE
[ 1.456387] groups: 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096)
[ 1.456398] CPU9 attaching sched-domain:
[ 1.456400] domain 0: span 9,11,13,15 level MC
[ 1.456402] groups: 9 11 13 15
[ 1.456406] domain 1: span 0-15 level NODE
[ 1.456408] groups: 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096)
[ 1.456419] CPU10 attaching sched-domain:
[ 1.456421] domain 0: span 8,10,12,14 level MC
[ 1.456423] groups: 10 12 14 8
[ 1.456427] domain 1: span 0-15 level NODE
[ 1.456429] groups: 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096)
[ 1.456440] CPU11 attaching sched-domain:
[ 1.456442] domain 0: span 9,11,13,15 level MC
[ 1.456444] groups: 11 13 15 9
[ 1.456449] domain 1: span 0-15 level NODE
[ 1.456450] groups: 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096)
[ 1.456461] CPU12 attaching sched-domain:
[ 1.456463] domain 0: span 8,10,12,14 level MC
[ 1.456465] groups: 12 14 8 10
[ 1.456470] domain 1: span 0-15 level NODE
[ 1.456472] groups: 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096)
[ 1.456482] CPU13 attaching sched-domain:
[ 1.456484] domain 0: span 9,11,13,15 level MC
[ 1.456486] groups: 13 15 9 11
[ 1.456491] domain 1: span 0-15 level NODE
[ 1.456493] groups: 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096)
[ 1.456503] CPU14 attaching sched-domain:
[ 1.456505] domain 0: span 8,10,12,14 level MC
[ 1.456507] groups: 14 8 10 12
[ 1.456512] domain 1: span 0-15 level NODE
[ 1.456514] groups: 8,10,12,14 (cpu_power = 4096) 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096)
[ 1.456525] CPU15 attaching sched-domain:
[ 1.456527] domain 0: span 9,11,13,15 level MC
[ 1.456529] groups: 15 9 11 13
[ 1.456533] domain 1: span 0-15 level NODE
[ 1.456535] groups: 9,11,13,15 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) 8,10,12,14 (cpu_power = 4096)
[ 1.460145] devtmpfs: initialized
[ 1.465938] regulator: core version 0.5
[ 1.465938] NET: Registered protocol family 16
[ 1.465938] node 0 link 3: io port [e000, ffff]
[ 1.465938] TOM: 00000000e0000000 aka 3584M
[ 1.465938] Fam 10h mmconf [f0000000, f3ffffff]
[ 1.465938] node 0 link 3: mmio [e5800000, e5ffffff]
[ 1.465938] node 0 link 3: mmio [e6000000, ef2fffff]
[ 1.465938] node 0 link 3: mmio [fec80000, fecbffff]
[ 1.465938] node 3 link 3: mmio [fecc0000, fecfffff]
[ 1.465938] TOM2: 0000000420000000 aka 16896M
[ 1.465938] bus: [00,1f] on node 0 link 3
[ 1.465938] bus: 00 index 0 io port: [0, ffff]
[ 1.465938] bus: 00 index 1 mmio: [e0000000, efffffff]
[ 1.465938] bus: 00 index 2 mmio: [f4000000, fecbffff]
[ 1.465938] bus: 00 index 3 mmio: [fed00000, ffffffff]
[ 1.465938] bus: 00 index 4 mmio: [420000000, fcffffffff]
[ 1.465938] bus: [20,3f] on node 3 link 3
[ 1.465938] bus: 20 index 0 mmio: [fecc0000, fecfffff]
[ 1.465938] ACPI: bus type pci registered
[ 1.465938] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 1.465938] PCI: MCFG area at f0000000 reserved in E820
[ 1.469078] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 1.469080] PCI: Using configuration type 1 for base access
[ 1.469613] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 1.469615] mtrr: probably your BIOS does not setup all CPUs.
[ 1.469617] mtrr: corrected configuration.
[ 1.469866] bio: create slab <bio-0> at 0
[ 1.472497] ACPI: EC: Look up EC in DSDT
[ 1.481262] ACPI: BIOS _OSI(Linux) query ignored
[ 1.481958] ACPI: Interpreter enabled
[ 1.481960] ACPI: (supports S0 S4 S5)
[ 1.481974] ACPI: Using IOAPIC for interrupt routing
[ 1.494390] ACPI: No dock devices found.
[ 1.496565] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.496661] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.496664] pci 0000:00:02.0: PME# disabled
[ 1.496696] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.496699] pci 0000:00:03.0: PME# disabled
[ 1.496728] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 1.496730] pci 0000:00:04.0: PME# disabled
[ 1.496763] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.496766] pci 0000:00:09.0: PME# disabled
[ 1.496812] pci 0000:00:11.0: reg 10 io port: [0xece8-0xecef]
[ 1.496820] pci 0000:00:11.0: reg 14 io port: [0xecf8-0xecfb]
[ 1.496826] pci 0000:00:11.0: reg 18 io port: [0xecf0-0xecf7]
[ 1.496833] pci 0000:00:11.0: reg 1c io port: [0xecfc-0xecff]
[ 1.496839] pci 0000:00:11.0: reg 20 io port: [0xecd0-0xecdf]
[ 1.496846] pci 0000:00:11.0: reg 24 32bit mmio: [0xef2ff800-0xef2ffbff]
[ 1.496863] pci 0000:00:11.0: set SATA to AHCI mode
[ 1.496905] pci 0000:00:12.0: reg 10 32bit mmio: [0xef2fb000-0xef2fbfff]
[ 1.496955] pci 0000:00:12.1: reg 10 32bit mmio: [0xef2fc000-0xef2fcfff]
[ 1.497020] pci 0000:00:12.2: reg 10 32bit mmio: [0xef2ffe00-0xef2ffeff]
[ 1.497067] pci 0000:00:12.2: supports D1 D2
[ 1.497069] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.497073] pci 0000:00:12.2: PME# disabled
[ 1.497103] pci 0000:00:13.0: reg 10 32bit mmio: [0xef2fd000-0xef2fdfff]
[ 1.497153] pci 0000:00:13.1: reg 10 32bit mmio: [0xef2fe000-0xef2fefff]
[ 1.497218] pci 0000:00:13.2: reg 10 32bit mmio: [0xef2fff00-0xef2fffff]
[ 1.497265] pci 0000:00:13.2: supports D1 D2
[ 1.497267] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.497271] pci 0000:00:13.2: PME# disabled
[ 1.497737] PCI: peer root bus 00 res updated from pci conf
[ 1.497773] pci 0000:01:00.0: reg 10 64bit mmio: [0xe6000000-0xe7ffffff]
[ 1.497812] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.497816] pci 0000:01:00.0: PME# disabled
[ 1.497857] pci 0000:01:00.1: reg 10 64bit mmio: [0xe8000000-0xe9ffffff]
[ 1.497896] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.497899] pci 0000:01:00.1: PME# disabled
[ 1.504092] pci 0000:00:02.0: bridge 32bit mmio: [0xe6000000-0xe9ffffff]
[ 1.504136] pci 0000:02:00.0: reg 10 64bit mmio: [0xea000000-0xebffffff]
[ 1.504178] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.504181] pci 0000:02:00.0: PME# disabled
[ 1.504231] pci 0000:02:00.1: reg 10 64bit mmio: [0xec000000-0xedffffff]
[ 1.504271] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 1.504274] pci 0000:02:00.1: PME# disabled
[ 1.512093] pci 0000:00:03.0: bridge 32bit mmio: [0xea000000-0xedffffff]
[ 1.512126] pci 0000:03:00.0: reg 10 32bit mmio: [0xef1e0000-0xef1fffff]
[ 1.512154] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.512158] pci 0000:03:00.0: PME# disabled
[ 1.520071] pci 0000:00:04.0: bridge io port: [0xf000-0xffff]
[ 1.520075] pci 0000:00:04.0: bridge 32bit mmio: [0xef000000-0xef1fffff]
[ 1.520133] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.520136] pci 0000:04:00.0: PME# disabled
[ 1.520208] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 1.520212] pci 0000:04:01.0: PME# disabled
[ 1.520283] pci 0000:04:04.0: PME# supported from D0 D3hot D3cold
[ 1.520286] pci 0000:04:04.0: PME# disabled
[ 1.520357] pci 0000:04:05.0: PME# supported from D0 D3hot D3cold
[ 1.520360] pci 0000:04:05.0: PME# disabled
[ 1.520412] pci 0000:03:00.0: bridge io port: [0xf000-0xffff]
[ 1.520415] pci 0000:03:00.0: bridge 32bit mmio: [0xef000000-0xef0fffff]
[ 1.520444] pci 0000:05:00.0: reg 10 io port: [0xfc00-0xfcff]
[ 1.520454] pci 0000:05:00.0: reg 14 64bit mmio: [0xef0fc000-0xef0fffff]
[ 1.520463] pci 0000:05:00.0: reg 1c 64bit mmio: [0xef040000-0xef07ffff]
[ 1.520472] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xef080000-0xef0bffff]
[ 1.520496] pci 0000:05:00.0: supports D1 D2
[ 1.528066] pci 0000:04:00.0: bridge io port: [0xf000-0xffff]
[ 1.528071] pci 0000:04:00.0: bridge 32bit mmio: [0xef000000-0xef0fffff]
[ 1.528280] pci 0000:0a:03.0: reg 10 32bit mmio pref: [0xe5800000-0xe5ffffff]
[ 1.528288] pci 0000:0a:03.0: reg 14 32bit mmio: [0xeeffc000-0xeeffffff]
[ 1.528296] pci 0000:0a:03.0: reg 18 32bit mmio: [0xee000000-0xee7fffff]
[ 1.528320] pci 0000:0a:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.528395] pci 0000:00:14.4: transparent bridge
[ 1.528401] pci 0000:00:14.4: bridge 32bit mmio: [0xee000000-0xeeffffff]
[ 1.528406] pci 0000:00:14.4: bridge 32bit mmio pref: [0xe5800000-0xe5ffffff]
[ 1.528424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.528572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 1.528638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.528699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 1.528759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
[ 1.528817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.574007] ACPI: PCI Root Bridge [PCI1] (0000:20)
[ 1.574100] pci 0000:20:02.0: PME# supported from D0 D3hot D3cold
[ 1.574103] pci 0000:20:02.0: PME# disabled
[ 1.574137] pci 0000:20:03.0: PME# supported from D0 D3hot D3cold
[ 1.574140] pci 0000:20:03.0: PME# disabled
[ 1.574177] pci 0000:20:0b.0: PME# supported from D0 D3hot D3cold
[ 1.574179] pci 0000:20:0b.0: PME# disabled
[ 1.574197] PCI: peer root bus 20 res updated from pci conf
[ 1.574275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 1.574383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEX2._PRT]
[ 1.574445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEX3._PRT]
[ 1.574506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXB._PRT]
[ 1.579733] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
[ 1.579864] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
[ 1.579994] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
[ 1.580133] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
[ 1.580263] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
[ 1.580392] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
[ 1.580521] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
[ 1.580655] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
[ 1.580786] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
[ 1.580915] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
[ 1.581043] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
[ 1.581172] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
[ 1.581301] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
[ 1.581430] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
[ 1.581558] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
[ 1.581687] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
[ 1.581815] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
[ 1.581943] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
[ 1.582072] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
[ 1.582200] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
[ 1.582329] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
[ 1.582458] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
[ 1.582588] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
[ 1.582716] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
[ 1.582845] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
[ 1.582974] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
[ 1.583103] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
[ 1.583232] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
[ 1.583361] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
[ 1.583490] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
[ 1.583619] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
[ 1.583748] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
[ 1.583881] ACPI: PCI Interrupt Link [LN56] (IRQs *56)
[ 1.584023] ACPI: PCI Interrupt Link [LN57] (IRQs *57)
[ 1.584154] ACPI: PCI Interrupt Link [LN58] (IRQs *58)
[ 1.584286] ACPI: PCI Interrupt Link [LN59] (IRQs *59)
[ 1.584415] ACPI: PCI Interrupt Link [LN60] (IRQs *60)
[ 1.584545] ACPI: PCI Interrupt Link [LN61] (IRQs *61)
[ 1.584675] ACPI: PCI Interrupt Link [LN62] (IRQs *62)
[ 1.584804] ACPI: PCI Interrupt Link [LN63] (IRQs *63)
[ 1.584934] ACPI: PCI Interrupt Link [LN64] (IRQs *64)
[ 1.585064] ACPI: PCI Interrupt Link [LN65] (IRQs *65)
[ 1.585194] ACPI: PCI Interrupt Link [LN66] (IRQs *66)
[ 1.585323] ACPI: PCI Interrupt Link [LN67] (IRQs *67)
[ 1.585453] ACPI: PCI Interrupt Link [LN68] (IRQs *68)
[ 1.585583] ACPI: PCI Interrupt Link [LN69] (IRQs *69)
[ 1.585712] ACPI: PCI Interrupt Link [LN70] (IRQs *70)
[ 1.585842] ACPI: PCI Interrupt Link [LN71] (IRQs *71)
[ 1.585971] ACPI: PCI Interrupt Link [LN72] (IRQs *72)
[ 1.586101] ACPI: PCI Interrupt Link [LN73] (IRQs *73)
[ 1.586231] ACPI: PCI Interrupt Link [LN74] (IRQs *74)
[ 1.586361] ACPI: PCI Interrupt Link [LN75] (IRQs *75)
[ 1.586491] ACPI: PCI Interrupt Link [LN76] (IRQs *76)
[ 1.586620] ACPI: PCI Interrupt Link [LN77] (IRQs *77)
[ 1.586750] ACPI: PCI Interrupt Link [LN78] (IRQs *78)
[ 1.586880] ACPI: PCI Interrupt Link [LN79] (IRQs *79)
[ 1.587012] ACPI: PCI Interrupt Link [LN80] (IRQs *80)
[ 1.587142] ACPI: PCI Interrupt Link [LN81] (IRQs *81)
[ 1.587272] ACPI: PCI Interrupt Link [LN82] (IRQs *82)
[ 1.587401] ACPI: PCI Interrupt Link [LN83] (IRQs *83)
[ 1.587531] ACPI: PCI Interrupt Link [LN84] (IRQs *84)
[ 1.587661] ACPI: PCI Interrupt Link [LN85] (IRQs *85)
[ 1.587790] ACPI: PCI Interrupt Link [LN86] (IRQs *86)
[ 1.587920] ACPI: PCI Interrupt Link [LN87] (IRQs *87)
[ 1.588051] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.588213] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.588373] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.588531] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.588689] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.588847] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.589008] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.589167] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0
[ 1.589307] vgaarb: device added: PCI:0000:0a:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.589311] vgaarb: loaded
[ 1.589338] PCI: Using ACPI for IRQ routing
[ 1.589338] Expanded resource reserved due to conflict with PCI Bus #00
[ 1.589338] Expanded resource reserved due to conflict with PCI Bus #20
[ 1.589338] Expanded resource reserved due to conflict with reserved
[ 1.589338] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 88, 0
[ 1.589338] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.590489] Switching to clocksource tsc
[ 1.594204] pnp: PnP ACPI init
[ 1.594231] ACPI: bus type pnp registered
[ 1.606129] pnp: PnP ACPI: found 11 devices
[ 1.606131] ACPI: ACPI bus type pnp unregistered
[ 1.606148] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.606152] system 00:07: ioport range 0x900-0x93f has been reserved
[ 1.606154] system 00:07: ioport range 0xd00-0xdfe has been reserved
[ 1.606157] system 00:07: ioport range 0xdff-0xdff has been reserved
[ 1.606160] system 00:07: ioport range 0xe00-0xefe has been reserved
[ 1.606163] system 00:07: ioport range 0xeff-0xeff has been reserved
[ 1.606165] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 1.606168] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 1.606171] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 1.606174] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 1.606176] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 1.606179] system 00:07: ioport range 0xc50-0xc52 has been reserved
[ 1.606184] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 1.606187] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 1.606190] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 1.606193] system 00:07: ioport range 0xcd8-0xcdb has been reserved
[ 1.606195] system 00:07: ioport range 0xcdc-0xcdf has been reserved
[ 1.606198] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 1.606201] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 1.606204] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 1.606207] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.606209] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.606212] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.606215] system 00:07: ioport range 0x950-0x950 has been reserved
[ 1.606220] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.606223] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.612361] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 1.612364] pci 0000:00:02.0: IO window: disabled
[ 1.612367] pci 0000:00:02.0: MEM window: 0xe6000000-0xe9ffffff
[ 1.612370] pci 0000:00:02.0: PREFETCH window: disabled
[ 1.612374] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.612376] pci 0000:00:03.0: IO window: disabled
[ 1.612379] pci 0000:00:03.0: MEM window: 0xea000000-0xedffffff
[ 1.612382] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.612386] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
[ 1.612389] pci 0000:04:00.0: IO window: 0xf000-0xffff
[ 1.612393] pci 0000:04:00.0: MEM window: 0xef000000-0xef0fffff
[ 1.612397] pci 0000:04:00.0: PREFETCH window: disabled
[ 1.612401] pci 0000:04:01.0: PCI bridge, secondary bus 0000:06
[ 1.612403] pci 0000:04:01.0: IO window: disabled
[ 1.612407] pci 0000:04:01.0: MEM window: disabled
[ 1.612410] pci 0000:04:01.0: PREFETCH window: disabled
[ 1.612415] pci 0000:04:04.0: PCI bridge, secondary bus 0000:07
[ 1.612417] pci 0000:04:04.0: IO window: disabled
[ 1.612421] pci 0000:04:04.0: MEM window: disabled
[ 1.612424] pci 0000:04:04.0: PREFETCH window: disabled
[ 1.612429] pci 0000:04:05.0: PCI bridge, secondary bus 0000:08
[ 1.612430] pci 0000:04:05.0: IO window: disabled
[ 1.612434] pci 0000:04:05.0: MEM window: disabled
[ 1.612437] pci 0000:04:05.0: PREFETCH window: disabled
[ 1.612442] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 1.612444] pci 0000:03:00.0: IO window: 0xf000-0xffff
[ 1.612449] pci 0000:03:00.0: MEM window: 0xef000000-0xef0fffff
[ 1.612452] pci 0000:03:00.0: PREFETCH window: disabled
[ 1.612456] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 1.612459] pci 0000:00:04.0: IO window: 0xf000-0xffff
[ 1.612462] pci 0000:00:04.0: MEM window: 0xef000000-0xef1fffff
[ 1.612464] pci 0000:00:04.0: PREFETCH window: disabled
[ 1.612468] pci 0000:00:09.0: PCI bridge, secondary bus 0000:09
[ 1.612470] pci 0000:00:09.0: IO window: disabled
[ 1.612472] pci 0000:00:09.0: MEM window: disabled
[ 1.612475] pci 0000:00:09.0: PREFETCH window: disabled
[ 1.612482] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0a
[ 1.612483] pci 0000:00:14.4: IO window: disabled
[ 1.612488] pci 0000:00:14.4: MEM window: 0xee000000-0xeeffffff
[ 1.612493] pci 0000:00:14.4: PREFETCH window: 0xe5800000-0xe5ffffff
[ 1.612646] ACPI: PCI Interrupt Link [LN52] enabled at IRQ 52
[ 1.612654] alloc irq_desc for 52 on node 0
[ 1.612657] alloc kstat_irqs on node 0
[ 1.612671] pci 0000:00:02.0: PCI INT A -> Link[LN52] -> GSI 52 (level, high) -> IRQ 52
[ 1.612676] pci 0000:00:02.0: setting latency timer to 64
[ 1.612682] pci 0000:00:03.0: PCI INT A -> Link[LN52] -> GSI 52 (level, high) -> IRQ 52
[ 1.612685] pci 0000:00:03.0: setting latency timer to 64
[ 1.612691] pci 0000:00:04.0: PCI INT A -> Link[LN52] -> GSI 52 (level, high) -> IRQ 52
[ 1.612694] pci 0000:00:04.0: setting latency timer to 64
[ 1.612816] ACPI: PCI Interrupt Link [LN44] enabled at IRQ 44
[ 1.612819] alloc irq_desc for 44 on node 0
[ 1.612822] alloc kstat_irqs on node 0
[ 1.612827] pci 0000:03:00.0: PCI INT A -> Link[LN44] -> GSI 44 (level, high) -> IRQ 44
[ 1.612831] pci 0000:03:00.0: setting latency timer to 64
[ 1.612840] pci 0000:04:00.0: PCI INT A -> Link[LN44] -> GSI 44 (level, high) -> IRQ 44
[ 1.612844] pci 0000:04:00.0: setting latency timer to 64
[ 1.612959] ACPI: PCI Interrupt Link [LN45] enabled at IRQ 45
[ 1.612962] alloc irq_desc for 45 on node 0
[ 1.612964] alloc kstat_irqs on node 0
[ 1.612968] pci 0000:04:01.0: PCI INT A -> Link[LN45] -> GSI 45 (level, high) -> IRQ 45
[ 1.612972] pci 0000:04:01.0: setting latency timer to 64
[ 1.612980] pci 0000:04:04.0: PCI INT A -> Link[LN44] -> GSI 44 (level, high) -> IRQ 44
[ 1.612983] pci 0000:04:04.0: setting latency timer to 64
[ 1.612991] pci 0000:04:05.0: PCI INT A -> Link[LN45] -> GSI 45 (level, high) -> IRQ 45
[ 1.612995] pci 0000:04:05.0: setting latency timer to 64
[ 1.613107] ACPI: PCI Interrupt Link [LN53] enabled at IRQ 53
[ 1.613110] alloc irq_desc for 53 on node 0
[ 1.613112] alloc kstat_irqs on node 0
[ 1.613116] pci 0000:00:09.0: PCI INT A -> Link[LN53] -> GSI 53 (level, high) -> IRQ 53
[ 1.613119] pci 0000:00:09.0: setting latency timer to 64
[ 1.613127] pci 0000:20:02.0: PCI bridge, secondary bus 0000:21
[ 1.613129] pci 0000:20:02.0: IO window: disabled
[ 1.613132] pci 0000:20:02.0: MEM window: disabled
[ 1.613135] pci 0000:20:02.0: PREFETCH window: disabled
[ 1.613138] pci 0000:20:03.0: PCI bridge, secondary bus 0000:22
[ 1.613140] pci 0000:20:03.0: IO window: disabled
[ 1.613143] pci 0000:20:03.0: MEM window: disabled
[ 1.613146] pci 0000:20:03.0: PREFETCH window: disabled
[ 1.613150] pci 0000:20:0b.0: PCI bridge, secondary bus 0000:23
[ 1.613151] pci 0000:20:0b.0: IO window: disabled
[ 1.613154] pci 0000:20:0b.0: MEM window: disabled
[ 1.613157] pci 0000:20:0b.0: PREFETCH window: disabled
[ 1.613271] ACPI: PCI Interrupt Link [LN84] enabled at IRQ 84
[ 1.613274] alloc irq_desc for 84 on node 3
[ 1.613278] alloc kstat_irqs on node 3
[ 1.613285] pci 0000:20:02.0: PCI INT A -> Link[LN84] -> GSI 84 (level, high) -> IRQ 84
[ 1.613288] pci 0000:20:02.0: setting latency timer to 64
[ 1.613295] pci 0000:20:03.0: PCI INT A -> Link[LN84] -> GSI 84 (level, high) -> IRQ 84
[ 1.613298] pci 0000:20:03.0: setting latency timer to 64
[ 1.613410] ACPI: PCI Interrupt Link [LN86] enabled at IRQ 86
[ 1.613413] alloc irq_desc for 86 on node 3
[ 1.613415] alloc kstat_irqs on node 3
[ 1.613419] pci 0000:20:0b.0: PCI INT A -> Link[LN86] -> GSI 86 (level, high) -> IRQ 86
[ 1.613422] pci 0000:20:0b.0: setting latency timer to 64
[ 1.613427] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.613430] pci_bus 0000:00: resource 1 mem: [0xe0000000-0xefffffff]
[ 1.613432] pci_bus 0000:00: resource 2 mem: [0xf4000000-0xfecbffff]
[ 1.613435] pci_bus 0000:00: resource 3 mem: [0xfed00000-0xffffffff]
[ 1.613438] pci_bus 0000:00: resource 4 mem: [0x420000000-0xfcffffffff]
[ 1.613440] pci_bus 0000:01: resource 1 mem: [0xe6000000-0xe9ffffff]
[ 1.613443] pci_bus 0000:02: resource 1 mem: [0xea000000-0xedffffff]
[ 1.613446] pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
[ 1.613449] pci_bus 0000:03: resource 1 mem: [0xef000000-0xef1fffff]
[ 1.613451] pci_bus 0000:04: resource 0 io: [0xf000-0xffff]
[ 1.613454] pci_bus 0000:04: resource 1 mem: [0xef000000-0xef0fffff]
[ 1.613456] pci_bus 0000:05: resource 0 io: [0xf000-0xffff]
[ 1.613459] pci_bus 0000:05: resource 1 mem: [0xef000000-0xef0fffff]
[ 1.613462] pci_bus 0000:0a: resource 1 mem: [0xee000000-0xeeffffff]
[ 1.613465] pci_bus 0000:0a: resource 2 pref mem [0xe5800000-0xe5ffffff]
[ 1.613467] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 1.613470] pci_bus 0000:0a: resource 4 mem: [0xe0000000-0xefffffff]
[ 1.613472] pci_bus 0000:0a: resource 5 mem: [0xf4000000-0xfecbffff]
[ 1.613475] pci_bus 0000:0a: resource 6 mem: [0xfed00000-0xffffffff]
[ 1.613477] pci_bus 0000:0a: resource 7 mem: [0x420000000-0xfcffffffff]
[ 1.613480] pci_bus 0000:20: resource 0 mem: [0xfecc0000-0xfecfffff]
[ 1.613483] pci_bus 0000:20: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.613538] NET: Registered protocol family 2
[ 1.614043] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.616018] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.618879] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.619226] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.619228] TCP reno registered
[ 1.619661] NET: Registered protocol family 1
[ 1.700556] pci 0000:0a:03.0: Boot video device
[ 1.700628] Unpacking initramfs...
[ 1.928635] Freeing initrd memory: 9826k freed
[ 1.939726] PCI-DMA: Disabling AGP.
[ 1.939927] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.939929] PCI-DMA: using GART IOMMU.
[ 1.939933] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.943879] audit: initializing netlink socket (disabled)
[ 1.943909] type=2000 audit(1288303153.940:1): initialized
[ 1.948484] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.951432] VFS: Disk quotas dquot_6.5.2
[ 1.951498] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.951603] msgmni has been set to 32138
[ 1.953599] alg: No test for stdrng (krng)
[ 1.953688] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.953692] io scheduler noop registered
[ 1.953694] io scheduler anticipatory registered
[ 1.953696] io scheduler deadline registered
[ 1.953731] io scheduler cfq registered (default)
[ 1.953993] alloc irq_desc for 89 on node 0
[ 1.953998] alloc kstat_irqs on node 0
[ 1.954010] pcieport 0000:00:02.0: irq 89 for MSI/MSI-X
[ 1.954015] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.954234] alloc irq_desc for 90 on node 0
[ 1.954236] alloc kstat_irqs on node 0
[ 1.954243] pcieport 0000:00:03.0: irq 90 for MSI/MSI-X
[ 1.954248] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.954453] alloc irq_desc for 91 on node 0
[ 1.954455] alloc kstat_irqs on node 0
[ 1.954462] pcieport 0000:00:04.0: irq 91 for MSI/MSI-X
[ 1.954466] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.954669] alloc irq_desc for 92 on node 0
[ 1.954672] alloc kstat_irqs on node 0
[ 1.954678] pcieport 0000:00:09.0: irq 92 for MSI/MSI-X
[ 1.954684] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.954916] alloc irq_desc for 93 on node 0
[ 1.954919] alloc kstat_irqs on node 0
[ 1.954927] pcieport 0000:03:00.0: irq 93 for MSI/MSI-X
[ 1.954934] pcieport 0000:03:00.0: setting latency timer to 64
[ 1.955172] alloc irq_desc for 94 on node 0
[ 1.955174] alloc kstat_irqs on node 0
[ 1.955183] pcieport 0000:04:00.0: irq 94 for MSI/MSI-X
[ 1.955189] pcieport 0000:04:00.0: setting latency timer to 64
[ 1.955429] alloc irq_desc for 95 on node 0
[ 1.955432] alloc kstat_irqs on node 0
[ 1.955440] pcieport 0000:04:01.0: irq 95 for MSI/MSI-X
[ 1.955446] pcieport 0000:04:01.0: setting latency timer to 64
[ 1.955686] alloc irq_desc for 96 on node 0
[ 1.955689] alloc kstat_irqs on node 0
[ 1.955697] pcieport 0000:04:04.0: irq 96 for MSI/MSI-X
[ 1.955703] pcieport 0000:04:04.0: setting latency timer to 64
[ 1.955946] alloc irq_desc for 97 on node 0
[ 1.955949] alloc kstat_irqs on node 0
[ 1.955957] pcieport 0000:04:05.0: irq 97 for MSI/MSI-X
[ 1.955963] pcieport 0000:04:05.0: setting latency timer to 64
[ 1.956240] alloc irq_desc for 98 on node 3
[ 1.956245] alloc kstat_irqs on node 3
[ 1.956262] pcieport 0000:20:02.0: irq 98 for MSI/MSI-X
[ 1.956268] pcieport 0000:20:02.0: setting latency timer to 64
[ 1.956545] alloc irq_desc for 99 on node 3
[ 1.956548] alloc kstat_irqs on node 3
[ 1.956556] pcieport 0000:20:03.0: irq 99 for MSI/MSI-X
[ 1.956561] pcieport 0000:20:03.0: setting latency timer to 64
[ 1.956793] alloc irq_desc for 100 on node 3
[ 1.956796] alloc kstat_irqs on node 3
[ 1.956803] pcieport 0000:20:0b.0: irq 100 for MSI/MSI-X
[ 1.956808] pcieport 0000:20:0b.0: setting latency timer to 64
[ 1.957272] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 1.957297] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 1.957359] aer 0000:00:04.0:pcie02: service driver aer loaded
[ 1.957381] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 1.957648] aer 0000:20:02.0:pcie02: service driver aer loaded
[ 1.957670] aer 0000:20:03.0:pcie02: service driver aer loaded
[ 1.957692] aer 0000:20:0b.0:pcie02: service driver aer loaded
[ 1.958988] Linux agpgart interface v0.103
[ 1.959040] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.959142] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.959245] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.959496] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.959627] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.959845] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.959902] PNP: No PS/2 controller found. Probing ports directly.
[ 1.962670] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.962678] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.962793] mice: PS/2 mouse device common for all mice
[ 1.962834] rtc_cmos 00:04: RTC can wake from S4
[ 1.962877] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.962908] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.962921] cpuidle: using governor ladder
[ 1.962924] cpuidle: using governor menu
[ 1.962928] No iBFT detected.
[ 1.963401] TCP cubic registered
[ 1.963523] NET: Registered protocol family 10
[ 1.964523] lo: Disabled Privacy Extensions
[ 1.964805] Mobile IPv6
[ 1.964808] NET: Registered protocol family 17
[ 1.964882] PM: Resume from disk failed.
[ 1.964892] registered taskstats version 1
[ 1.965743] rtc_cmos 00:04: setting system clock to 2010-10-28 21:59:14 UTC (1288303154)
[ 1.965775] Initalizing network drop monitor service
[ 1.965863] Freeing unused kernel memory: 584k freed
[ 1.966024] Write protecting the kernel read-only data: 4232k
[ 1.985130] udev[261]: starting version 163
[ 2.015343] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 2.015526] ACPI: PCI Interrupt Link [LN24] enabled at IRQ 24
[ 2.015532] alloc irq_desc for 24 on node 0
[ 2.015534] alloc kstat_irqs on node 0
[ 2.015547] bnx2 0000:01:00.0: PCI INT A -> Link[LN24] -> GSI 24 (level, high) -> IRQ 24
[ 2.015554] bnx2 0000:01:00.0: setting latency timer to 64
[ 2.015697] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 2.026359] SCSI subsystem initialized
[ 2.030951] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 2.034996] eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem e6000000, IRQ 24, node addr f0:4d:a2:3c:33:7a
[ 2.035301] ACPI: PCI Interrupt Link [LN25] enabled at IRQ 25
[ 2.035306] alloc irq_desc for 25 on node 0
[ 2.035308] alloc kstat_irqs on node 0
[ 2.035316] bnx2 0000:01:00.1: PCI INT B -> Link[LN25] -> GSI 25 (level, high) -> IRQ 25
[ 2.035322] bnx2 0000:01:00.1: setting latency timer to 64
[ 2.035477] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 2.036684] usbcore: registered new interface driver usbfs
[ 2.036715] usbcore: registered new interface driver hub
[ 2.036771] usbcore: registered new device driver usb
[ 2.038564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.038679] alloc irq_desc for 17 on node 0
[ 2.038682] alloc kstat_irqs on node 0
[ 2.038692] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.038766] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.038805] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.038845] ehci_hcd 0000:00:12.2: debug port 1
[ 2.038875] ehci_hcd 0000:00:12.2: irq 17, io mem 0xef2ffe00
[ 2.038931] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 2.040063] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 2.040184] megasas: 0x1000:0x0079:0x1028:0x1f17: bus 5:slot 0:func 0
[ 2.040205] megaraid_sas 0000:05:00.0: PCI INT A -> Link[LN44] -> GSI 44 (level, high) -> IRQ 44
[ 2.040210] megaraid_sas 0000:05:00.0: setting latency timer to 64
[ 2.040336] megasas: FW now in Ready state
[ 2.041658] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.042915] eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem e8000000, IRQ 25, node addr f0:4d:a2:3c:33:7c
[ 2.043186] ACPI: PCI Interrupt Link [LN28] enabled at IRQ 28
[ 2.043191] alloc irq_desc for 28 on node 0
[ 2.043193] alloc kstat_irqs on node 0
[ 2.043199] bnx2 0000:02:00.0: PCI INT A -> Link[LN28] -> GSI 28 (level, high) -> IRQ 28
[ 2.043205] bnx2 0000:02:00.0: setting latency timer to 64
[ 2.043365] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 2.046861] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 2.050949] eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 28, node addr f0:4d:a2:3c:33:7e
[ 2.051204] ACPI: PCI Interrupt Link [LN29] enabled at IRQ 29
[ 2.051208] alloc irq_desc for 29 on node 0
[ 2.051210] alloc kstat_irqs on node 0
[ 2.051216] bnx2 0000:02:00.1: PCI INT B -> Link[LN29] -> GSI 29 (level, high) -> IRQ 29
[ 2.051222] bnx2 0000:02:00.1: setting latency timer to 64
[ 2.051325] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 2.052039] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.052091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.052094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.052096] usb usb1: Product: EHCI Host Controller
[ 2.052098] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 2.052100] usb usb1: SerialNumber: 0000:00:12.2
[ 2.052207] usb usb1: configuration #1 chosen from 1 choice
[ 2.052239] hub 1-0:1.0: USB hub found
[ 2.052247] hub 1-0:1.0: 6 ports detected
[ 2.052451] alloc irq_desc for 16 on node 0
[ 2.052454] alloc kstat_irqs on node 0
[ 2.052463] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.052489] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.052505] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 2.052543] ohci_hcd 0000:00:12.0: irq 16, io mem 0xef2fb000
[ 2.054667] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 2.056467] libata version 3.00 loaded.
[ 2.058654] eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 29, node addr f0:4d:a2:3c:33:80
[ 2.064108] scsi0 : LSI SAS based MegaRAID driver
[ 2.065234] scsi 0:0:0:0: Direct-Access SEAGATE ST9600204SS FM07 PQ: 0 ANSI: 5
[ 2.066063] scsi 0:0:1:0: Direct-Access SEAGATE ST9600204SS FM07 PQ: 0 ANSI: 5
[ 2.066860] scsi 0:0:2:0: Direct-Access SEAGATE ST9600204SS FM07 PQ: 0 ANSI: 5
[ 2.067670] scsi 0:0:3:0: Direct-Access SEAGATE ST9600204SS FM07 PQ: 0 ANSI: 5
[ 2.116063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.116066] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.116069] usb usb2: Product: OHCI Host Controller
[ 2.116071] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.116073] usb usb2: SerialNumber: 0000:00:12.0
[ 2.116158] usb usb2: configuration #1 chosen from 1 choice
[ 2.116188] hub 2-0:1.0: USB hub found
[ 2.116198] hub 2-0:1.0: 3 ports detected
[ 2.116394] alloc irq_desc for 19 on node 0
[ 2.116398] alloc kstat_irqs on node 0
[ 2.116408] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.116485] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.116503] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 2.116542] ehci_hcd 0000:00:13.2: debug port 1
[ 2.116565] ehci_hcd 0000:00:13.2: irq 19, io mem 0xef2fff00
[ 2.132060] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.132100] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.132103] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.132105] usb usb3: Product: EHCI Host Controller
[ 2.132107] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 2.132109] usb usb3: SerialNumber: 0000:00:13.2
[ 2.132180] usb usb3: configuration #1 chosen from 1 choice
[ 2.132212] hub 3-0:1.0: USB hub found
[ 2.132219] hub 3-0:1.0: 6 ports detected
[ 2.132419] ahci 0000:00:11.0: version 3.0
[ 2.132431] alloc irq_desc for 22 on node 0
[ 2.132433] alloc kstat_irqs on node 0
[ 2.132442] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.132601] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.132606] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.132892] scsi1 : ahci
[ 2.133022] scsi2 : ahci
[ 2.133128] scsi3 : ahci
[ 2.133231] scsi4 : ahci
[ 2.133279] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22
[ 2.133283] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22
[ 2.133287] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22
[ 2.133290] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22
[ 2.133464] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.133489] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.133505] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.133530] ohci_hcd 0000:00:12.1: irq 16, io mem 0xef2fc000
[ 2.170007] scsi 0:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5
[ 2.184019] scsi 0:2:0:0: Direct-Access DELL PERC H700 2.30 PQ: 0 ANSI: 5
[ 2.196014] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.196017] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.196019] usb usb4: Product: OHCI Host Controller
[ 2.196021] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.196023] usb usb4: SerialNumber: 0000:00:12.1
[ 2.196105] usb usb4: configuration #1 chosen from 1 choice
[ 2.196132] hub 4-0:1.0: USB hub found
[ 2.196142] hub 4-0:1.0: 3 ports detected
[ 2.196330] alloc irq_desc for 18 on node 0
[ 2.196332] alloc kstat_irqs on node 0
[ 2.196341] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.196375] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.196397] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.196433] ohci_hcd 0000:00:13.0: irq 18, io mem 0xef2fd000
[ 2.256067] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.256070] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.256073] usb usb5: Product: OHCI Host Controller
[ 2.256075] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.256077] usb usb5: SerialNumber: 0000:00:13.0
[ 2.256154] usb usb5: configuration #1 chosen from 1 choice
[ 2.256184] hub 5-0:1.0: USB hub found
[ 2.256197] hub 5-0:1.0: 3 ports detected
[ 2.256360] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.256426] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.256443] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.256471] ohci_hcd 0000:00:13.1: irq 18, io mem 0xef2fe000
[ 2.316058] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.316061] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.316064] usb usb6: Product: OHCI Host Controller
[ 2.316065] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.316067] usb usb6: SerialNumber: 0000:00:13.1
[ 2.316137] usb usb6: configuration #1 chosen from 1 choice
[ 2.316163] hub 6-0:1.0: USB hub found
[ 2.316171] hub 6-0:1.0: 3 ports detected
[ 2.440127] usb 3-2: new high speed USB device using ehci_hcd and address 2
[ 2.452085] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.452091] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.452131] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.576908] usb 3-2: New USB device found, idVendor=0424, idProduct=2514
[ 2.576912] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.576975] usb 3-2: configuration #1 chosen from 1 choice
[ 2.577186] hub 3-2:1.0: USB hub found
[ 2.577259] hub 3-2:1.0: 4 ports detected
[ 2.616071] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.618871] ata1.00: ATAPI: PLDS DVD+/-RW DS-8A4S, JD51, max UDMA/100
[ 2.620668] ata1.00: configured for UDMA/100
[ 2.665979] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A4S JD51 PQ: 0 ANSI: 5
[ 2.669352] sd 0:2:0:0: [sda] 3512991744 512-byte logical blocks: (1.79 TB/1.63 TiB)
[ 2.669442] sd 0:2:0:0: [sda] Write Protect is off
[ 2.669446] sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
[ 2.669480] sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.669714] sda: sda1 sda2 < sda5 >
[ 2.670797] sd 0:2:0:0: [sda] Attached SCSI disk
[ 2.682859] sr0: scsi3-mmc drive: 24x/188x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 2.682863] Uniform CD-ROM driver Revision: 3.20
[ 2.682960] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.716062] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 2.781665] ses 0:0:32:0: Attached Enclosure device
[ 2.781766] ses 0:0:32:0: Attached scsi generic sg0 type 13
[ 2.781821] sd 0:2:0:0: Attached scsi generic sg1 type 0
[ 2.781862] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 2.889064] usb 4-1: New USB device found, idVendor=046d, idProduct=c315
[ 2.889067] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.889069] usb 4-1: Product: Logitech USB Keyboard
[ 2.889071] usb 4-1: Manufacturer: Logitech
[ 2.889154] usb 4-1: configuration #1 chosen from 1 choice
[ 2.899984] usbcore: registered new interface driver hiddev
[ 2.905265] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1
[ 2.905307] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-1/input0
[ 2.905329] usbcore: registered new interface driver usbhid
[ 2.905331] usbhid: v2.6:USB HID core driver
[ 2.968859] usb 3-2.4: new high speed USB device using ehci_hcd and address 3
[ 3.000357] device-mapper: uevent: version 1.0.3
[ 3.000623] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.065211] usb 3-2.4: New USB device found, idVendor=413c, idProduct=a101
[ 3.065215] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.065217] usb 3-2.4: Product: Internal Dual SD
[ 3.065219] usb 3-2.4: Manufacturer: Dell Computer Corp.
[ 3.065221] usb 3-2.4: SerialNumber: 0123456789AB
[ 3.065301] usb 3-2.4: configuration #1 chosen from 1 choice
[ 3.071473] Initializing USB Mass Storage driver...
[ 3.071666] scsi5 : SCSI emulation for USB Mass Storage devices
[ 3.071806] usb-storage: device found at 3
[ 3.071809] usb-storage: waiting for device to settle before scanning
[ 3.071822] usbcore: registered new interface driver usb-storage
[ 3.071826] USB Mass Storage support registered.
[ 3.120126] kjournald starting. Commit interval 5 seconds
[ 3.120144] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.841134] udev[694]: starting version 163
[ 4.000523] processor LNXCPU:00: registered as cooling_device0
[ 4.000725] processor LNXCPU:01: registered as cooling_device1
[ 4.000921] processor LNXCPU:02: registered as cooling_device2
[ 4.001140] processor LNXCPU:03: registered as cooling_device3
[ 4.001336] processor LNXCPU:04: registered as cooling_device4
[ 4.001549] processor LNXCPU:05: registered as cooling_device5
[ 4.001776] processor LNXCPU:06: registered as cooling_device6
[ 4.002007] processor LNXCPU:07: registered as cooling_device7
[ 4.002228] processor LNXCPU:08: registered as cooling_device8
[ 4.002451] processor LNXCPU:09: registered as cooling_device9
[ 4.002672] processor LNXCPU:0a: registered as cooling_device10
[ 4.002898] processor LNXCPU:0b: registered as cooling_device11
[ 4.003125] processor LNXCPU:0c: registered as cooling_device12
[ 4.003351] processor LNXCPU:0d: registered as cooling_device13
[ 4.003583] processor LNXCPU:0e: registered as cooling_device14
[ 4.003817] processor LNXCPU:0f: registered as cooling_device15
[ 4.004293] ACPI Error: No handler for Region [IPMI] (ffff88021fa09240) [IPMI] (20090903/evregion-319)
[ 4.004301] ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
[ 4.004309] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88021fa0a140), AE_NOT_EXIST
[ 4.004353] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88021fa0a0c0), AE_NOT_EXIST
[ 4.004431] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-772)
[ 4.005360] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.005368] ACPI: Power Button [PWRF]
[ 4.008718] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.088343] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.111331] EDAC MC: Ver: 2.1.0 Oct 19 2010
[ 4.130694] EDAC amd64_edac: Ver: 3.2.0 Oct 19 2010
[ 4.130821] EDAC amd64: ECC is enabled by BIOS.
[ 4.130948] EDAC amd64: ECC is enabled by BIOS.
[ 4.131084] EDAC amd64: ECC is enabled by BIOS.
[ 4.131251] EDAC amd64: ECC is enabled by BIOS.
[ 4.131332] EDAC MC: F10h CPU detected
[ 4.131348] EDAC amd64: f10_probe_valid_hardware() This machine is running with DDR3 memory. This is not currently supported. DCHR0=0x3f48090d DCHR1=0x3f48090d
[ 4.131351] EDAC amd64: Contact 'amd64_edac' module MAINTAINER to help add support.
[ 4.132039] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x900, revision 0
[ 4.255432] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.886233] EXT3 FS on dm-0, internal journal
[ 4.961835] loop: module loaded
[ 5.447247] Adding 32137208k swap on /dev/mapper/uicesv15-swap_1. Priority:-1 extents:1 across:32137208k
[ 8.068183] usb-storage: device scan complete
[ 8.068661] scsi 5:0:0:0: Direct-Access Dell Internal Dual SD 1.8 PQ: 0 ANSI: 5
[ 8.069613] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 8.070381] sd 5:0:0:0: [sdb] 1953792 512-byte logical blocks: (1.00 GB/954 MiB)
[ 8.071166] sd 5:0:0:0: [sdb] Write Protect is off
[ 8.071170] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 8.071173] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 8.072764] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 8.072868] sdb: sdb1 < sdb5 >
[ 8.077353] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 8.077457] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 22.573327] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 22.576813] SGI XFS Quota Management subsystem
[ 22.579222] XFS mounting filesystem dm-2
[ 22.689994] Ending clean XFS mount for filesystem: dm-2
[ 23.739842] alloc irq_desc for 101 on node 0
[ 23.739846] alloc kstat_irqs on node 0
[ 23.739854] bnx2 0000:01:00.0: irq 101 for MSI/MSI-X
[ 23.739856] alloc irq_desc for 102 on node 0
[ 23.739858] alloc kstat_irqs on node 0
[ 23.739861] bnx2 0000:01:00.0: irq 102 for MSI/MSI-X
[ 23.739863] alloc irq_desc for 103 on node 0
[ 23.739864] alloc kstat_irqs on node 0
[ 23.739867] bnx2 0000:01:00.0: irq 103 for MSI/MSI-X
[ 23.739869] alloc irq_desc for 104 on node 0
[ 23.739871] alloc kstat_irqs on node 0
[ 23.739874] bnx2 0000:01:00.0: irq 104 for MSI/MSI-X
[ 23.739876] alloc irq_desc for 105 on node 0
[ 23.739877] alloc kstat_irqs on node 0
[ 23.739880] bnx2 0000:01:00.0: irq 105 for MSI/MSI-X
[ 23.739882] alloc irq_desc for 106 on node 0
[ 23.739883] alloc kstat_irqs on node 0
[ 23.739886] bnx2 0000:01:00.0: irq 106 for MSI/MSI-X
[ 23.739888] alloc irq_desc for 107 on node 0
[ 23.739890] alloc kstat_irqs on node 0
[ 23.739892] bnx2 0000:01:00.0: irq 107 for MSI/MSI-X
[ 23.739894] alloc irq_desc for 108 on node 0
[ 23.739896] alloc kstat_irqs on node 0
[ 23.739898] bnx2 0000:01:00.0: irq 108 for MSI/MSI-X
[ 23.739900] alloc irq_desc for 109 on node 0
[ 23.739902] alloc kstat_irqs on node 0
[ 23.739904] bnx2 0000:01:00.0: irq 109 for MSI/MSI-X
[ 23.785887] bnx2: eth0: using MSIX
[ 23.788982] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.401969] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
[ 25.404916] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.900025] eth0: no IPv6 routers present
Reply to: