[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#215473: marked as done (generated fstab does not take ide-scsi into account)

Your message dated Mon, 20 Sep 2010 22:21:13 +0100
with message-id <4C97D049.7010700@debianpt.org>
and subject line device name
has caused the Debian Bug report #215473,
regarding generated fstab does not take ide-scsi into account
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
215473: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=215473
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports 

INSTALL REPORT 

Debian-installer-version : 1.10, Oct 8 2003
uname -a: 
Linux flit 2.4.22-1-386 #1 Fri Sep 5 20:56:48 EST 2003 i686 GNU/Linux 

Date installed: Oct 9 2003 

Method: used
http://gluck.debian.org/cdimage/testing/netinst/i386/sarge-i386-netinst.iso. Booted from CD 

Machine: IBM Thinkpad X22 
Processor:Pentium III 
Memory:384MB 
Root Device: IDE, hda 
Root Size/partition table: 
[see attachment] 

Output of lspci: 

Base System Installation Checklist: 

Initial boot worked:    [O] 
Configure network HW:   [E] 
Config network:         [E] 
Detect CD:              [O] 
Load installer modules: [O] 
Detect hard drives:     [O] 
Partition hard drives:  [O] 
Create file systems:    [O] 
Mount partitions:       [E] 
Install base system:    [O] 
Install boot loader:    [E] 
Reboot:                 [O] 
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it 

Comments/Problems: 


Configure network HW, config network -  
Installation system seems not to have either the eepro100 or the e100
module for the Intel PRO/100 fast ethernet card. Both these modules are
in the base system. However, unlike woody bf2.4, it was not obvious how
one can extract the drivers to a floppy for pre-loading. But since the
base system is all on the CD, network configuration is not really
needed. This won't be true for the business card version (which I did
not try). Maybe an opportunity should be given in the base-config to
configure networking if it hasn't yet been. I know base-config is not
part of the installer, but maybe network config is not regarded as part
of base-config. Another way is to instruct on how to extract the drivers
from the packages in the iso. 

Mount Partitions - the mounting of the hard disk was fine, but the
installer-generated fstab does not take into account that the CD device
is accessed with the ide-scsi driver. The CD device must be manually
remounted to allow further installation from CD. 

Install Grub - maybe this should be filed against the Grub installer. I
think I saw this mentioned somewhere on the mailing lists, although not
in any of the bug reports. The installer guesses the grub root wrong. So
even though the grub boot loader, the kernel and initrd are all properly
installed, the base system could not be booted. I was lucky to have a
previously installed kernel with the proper grub root specification. 


Disk /dev/hda: 20.0 GB, 20003880960 bytes
240 heads, 63 sectors/track, 2584 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1         557     4210888+   b  W95 FAT32
/dev/hda2            2422        2583     1224720   1c  Hidden W95 FAT32 (LBA)
/dev/hda3             558         566       68040   83  Linux
/dev/hda4             567        2421    14023800    f  W95 Ext'd (LBA)
/dev/hda5             567        1341     5858968+  83  Linux
/dev/hda6            1342        1443      771088+  82  Linux swap
/dev/hda7            1444        2421     7393648+  83  Linux

Partition table entries are not in disk order

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
--- Begin Message --- 
hi all,

with actual linux kernel both ide and sata devices, by default, use
libata which names both with sdx style names.

-- 

Melhores cumprimentos/Best regards,

Miguel Figueiredo
http://www.DebianPT.org

--- End Message ---
Reply to: