[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#592939: marked as done (wrong kernel chosen for AMD Duron K7)

Your message dated Sat, 18 Sep 2010 14:39:52 +0200
with message-id <20100918123952.GA3332@mykerinos.kheops.frmug.org>
and subject line Re: Bug#592939: Correct kernel installed with actual squeeze installer
has caused the Debian Bug report #592939,
regarding wrong kernel chosen for AMD Duron K7
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
592939: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=592939
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: CD
Image version: Self-made boot CD with actual squeeze installer
Date: 2010-08-14

Machine: Self-made Desktop PC
Processor: AMD Duron 800MHz
Memory: 256MB
Partitions: <df -Tl will do; the raw partition table is preferred>

> Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
> /dev/sda1 ext4 1921156 565776 1257788 32% /
> tmpfs tmpfs 127676 0 127676 0% /lib/init/rw
> udev tmpfs 123340 128 123212 1% /dev
> tmpfs tmpfs 127676 0 127676 0% /dev/shm
> /dev/sda5 xfs 77443576 40973076 36470500 53% /storage1
> /dev/sdb5 xfs 244076732 178833244 65243488 74% /storage2

Output of lspci -knn (or lspci -nn):

> 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 735 Host
> [1039:0735] (rev 01)
> Kernel driver in use: agpgart-sis
> 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual
> PCI-to-PCI bridge (AGP) [1039:0001]
> 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS]
> SiS85C503/5513 (LPC Bridge) [1039:0018]
> 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus
> Controller [1039:0016]
> 00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
> 1.1 Controller [1039:7001] (rev 07)
> Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001]
> Kernel driver in use: ohci_hcd
> 00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
> 1.1 Controller [1039:7001] (rev 07)
> Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001]
> Kernel driver in use: ohci_hcd
> 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513
> [IDE] [1039:5513] (rev d0)
> Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
> (A,B step) [1039:5513]
> Kernel driver in use: pata_sis
> 00:11.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
> Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter [11f6:8139]
> Kernel driver in use: 8139too
> 00:13.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
> USB 1.1 Controller [1106:3038] (rev 50)
> Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
> Kernel driver in use: uhci_hcd
> 00:13.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
> USB 1.1 Controller [1106:3038] (rev 50)
> Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
> Kernel driver in use: uhci_hcd
> 00:13.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0
> [1106:3104] (rev 51)
> Subsystem: First International Computer, Inc. Device [0925:1234]
> Kernel driver in use: ehci_hcd
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage
> 128 RF/SG AGP [1002:5246]
> Subsystem: ATI Technologies Inc Magnum/Xpert 128/Xpert 99 [1002:0004]


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]

Comments/Problems:

The used architecture is a K7 architecture (AMD Duron 800MHz).
the used kernel-image has to be the -686 image.
But there is the -486 image installed.

Here, the output of /proc/cpuinfo:

> bernhard@CR-Server:~$ more /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 3
> model name : AMD Duron(tm) Processor
> stepping : 1
> cpu MHz : 796.606
> cache size : 64 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat
> pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
> bogomips : 1593.21
> clflush size : 32
> cache_alignment : 32
> address sizes : 36 bits physical, 32 bits virtual
> power management:

Regards
Bernhard

--- End Message ---
--- Begin Message --- 
Quoting Bernhard Wörner (bewoern@online.de):
> The correct kernel-image (-686 image) is installed with the actual
> squeeze installer.
> This bug report can be closed.

Thanks for your feedback! Your installation report hadn't been triaged
yet, so sorry for the lack of answers you got..:-|

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: